Vamos familia que ya actualizamos la cosecha de estas Frosted Guava de Zamnesia. Vaya flores que se han marcado repletas de tricomas, parecen escarcha y las flores se marcan aromas muy tropicales, la verdad que únicos. Es una variedad bastante fácil de cultivar pero al tener un periodo de floración algo más largo, hay que estar pendiente de alimentarlas bien, gracias Agrobeta en mi sala es posible. Temperaturas máximas en 24 y mínimas en 20 y una humedad estable en torno al 36%. Las mantuve 10 semanas pero facilmente si se quedan 11 tampoco estaría mal, yo las vi bien maduras y ya tenía tricomas ambar así que les di matarile. Os comento que tengo un descuento y para que compréis en la web de Zamnesia de un 20%, el código es ZAMMIGD2023 The discount 20% and the code is ZAMMIGD2023 https://www.zamnesia.com/ Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Espero que disfruteis este diario, buenos humos 💨💨💨

Through the 3rd week of stretch now and the plants are doing great. Cottonballs everywhere and the scrog is relatively even with minimal tie backs in only weeks 1&2. Chopped out and lollipopped a bunch of foliage and we’ll prune various fan leaves around the canopy to expose some of the smaller side branch heads. What would a grow be without at least one issue. I hate doing this dtw crap manually - I forgot I left the pump on and accidentally ran like 30L of solution. Flooded out the tent and part of the basement at the same time and thought I had drowned out the plants…. They took it just fine and were looking great by the next morning so minus the cleanup it wasn’t really a bad thing I guess. We’re generally on autopilot while we wait for the buds to fatten and finish. So far - we’re still on track and well on the way to mid-flower phase👌.

Did some defoliation 3-4days earlyer 🤘🏾 looking good, no bugparty or any mold (yet)🤪 Waterd them with the good good n we out 🤘🏾

Week 9 - First Week of Flowering 🌸 The dark period has ended, and these ladies came back into the light fully energized and ready for action! It’s just the first week of flower, and they’re all praying, stretching, and absolutely thriving—filling up every inch of the tent. This grow space is officially packed from wall to wall, with each plant competing for its share of light and showing off some of the biggest, healthiest leaves I’ve seen yet! 🌱 A few strategic plucks here and there have kept airflow smooth and light penetration balanced. Those big leaves? They’re a sign of happy, healthy growth. Large leaves help the plant capture maximum light energy, essential during this stage, especially as they start focusing on developing those flowers. When plants grow huge, vibrant leaves like these, it means they’re well-nourished and content in their environment—a true testament to the well-balanced conditions we’ve got going in the tent! Flowering Parameters 🌡️ Room Environment: • Temperature: 26.7°C • Humidity: 63.3% • CO2: 960 ppm • VPD: 1.29 kPa (prime zone for flowering health!) Lighting: • Light Intensity: 835 PPFD (ideal for boosting flower growth) • Solution: pH 5.96, TDS 460 ppm, temp 21.1°C • Medium: Moisture: 100%, TDS: 520 ppm, Temp: 21.6°C Carbon Filter Installation & Smell Management 🌬️🌱 With the transition to flower, the scent profile is already starting to kick in—crazy for the first week, right? 🌸 To keep everything fresh and under wraps, I’ve set up a carbon filter system. Here’s how it’s working: I’ve connected the filter to my Aerofan, which pulls air directly from the tent. This air is cleaned by the filter and released into the main room, where it then passes through another filter before exiting my space. This dual-filter setup means no scent escapes into the wild, keeping things stealthy and the grow room a peaceful, scent-contained environment. Perfect for anyone concerned about keeping their home free from that telltale aroma! 🕶️🌬️ Enhanced Lighting with Emerson Effect 🌞 This week, I’ve introduced an extra 15 minutes of red light at the beginning and end of each light cycle. Why? Well, this red boost taps into the Emerson effect, enhancing photosynthesis efficiency, especially during the flowering stage. By stimulating a little extra wake-up and wind-down light, we’re mimicking the natural sunrise and sunset experience for these plants, which can help reduce flowering time. Not only does it encourage smoother transitions into day and night, but in theory, it’ll help these ladies finish a bit faster, while giving them a little nudge to build more substantial, quality flowers. 🌇 Nutrient Adjustments 🌱 Now that we’re in flower, I’ve swapped out the Start Booster for P-Boost and TopBooster to specifically support flowering needs. Here’s why: • P-Boost brings in additional phosphorus, vital for energy transfer and cell division as the plant channels more resources into budding sites. • TopBooster supports the flowering phase by improving flower quality and density, helping to build those big, aromatic buds we’re after. These changes bring the nutrient mix in line with what’s most beneficial at this stage. All this precise dialing in is easy to manage thanks to the TrolMaster system. From pH to nutrient scheduling, the TrolMaster ecosystem and ThinkGrow LEDs have been the ultimate teammates in this grow journey, giving me real-time data, fine control, and peace of mind. 💯 (Not introducing UV light just yet, but stay tuned as that’s coming soon for an added boost!) Looking Forward 🌟 Next week, we’ll be upping the reds, giving us an even greater chance of activating those flowering signals for a smoother, faster transition through the cycle. I’ll keep tweaking and fine-tuning every parameter to make sure these ladies get exactly what they need to thrive. Big thanks to the TrolMaster system for keeping everything in balance and optimized, along with the supportive Grow Fam following this journey! Your enthusiasm, advice, and support are a huge part of this grow’s success. Keep following for more updates, and stay tuned for what’s next! 🌿✨ P.S. Deep Dive: TrolMaster’s MBS-S8 CO₂ Sensor & Smoke Detector 🚨 The MBS-S8 CO₂ Sensor from TrolMaster is a powerhouse for growers, especially when it comes to optimizing plant growth and efficiency in a controlled environment. This sensor continuously monitors CO₂ levels and integrates directly with the TrolMaster ecosystem, giving you real-time data on CO₂ concentration. Ideal levels of CO₂ can significantly boost growth and yield during certain stages, so understanding and managing CO₂ is key. With the MBS-S8, I can control CO₂ levels precisely, keeping them within the optimal range for photosynthesis. This sensor is a game-changer because it adjusts CO₂ delivery automatically, giving plants exactly what they need without any extra monitoring from me. Meanwhile, TrolMaster’s Smoke Detector is an essential safety device, especially in spaces with electrical equipment, lights, and heat-generating components. This detector can be set up to alert me instantly via the TrolMaster app if any smoke is detected, allowing me to respond immediately to any potential issues. Fires and smoke are rare in controlled grow setups but having this safety measure provides peace of mind and lets me focus on the plants without constant worry. It’s an incredible tool for any grower prioritizing safety and proactive monitoring. Discount Codes so you can save big on your next check out 💚💚💚 Kannabia - DOGDOCTOR 30% off SeedsmanSeeds - DOGDOCTOR 10% off CannaKan- DOGDOCTOR 15% off terpyz.eu - DOCTOR 15% off The Neutralizer - PORKIT5-DOG 15% off As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 Friendly reminder all you see here is pure research and for educational purposes only Growers Love to you all 💚💚💚

day 73 any advice or comments ?

Fastbuds Meme Video Contest

plants are really exploding, bubba kush is furthest along probably two weeks ahead of plants on the left. Kush is stacking up frost and smelling super sweet. buds just starting to form on C-99 and Dx4(GG4x Chem D)

Day 29 - 01/12/19 in the last two weeks this plant has just exploded. very tall and very bushy! i had to bend the fan leaves out of the way so the preflowers could reach the light. Light floral/diesel smell coming from the plant. should be going into flowering next week :) Ive stopped using vitalink plantstart for feeding as our plant is established. I will now be using Canna A Canna B, Canna Rhizotonic and Vitalink Calmag. I have also been doing LST since last week to keep a more flat top round body shape to the plant :) hopefully this will force the plant to stay small but grow big buds! Same Day Update: watered the plants just now and i got frustrated looking at the diesel auto trying to keep the fan leaves above everything else haha. i said no and LSTd it hard! all the flowering growth now has great light coverage and i added a few photos in at the end too. From the photos you can see my Quick One plant from my other diary. on this plant all the colas are pretty even in height except from the main cola. this time im going to try and improve my technique on the diesel plant and try to get all colas at the same height :) Happy Growing and check out my other diaries!

NOTES: Keeping pH at 5,8-5,9 through the entire Vegetation-phase. EC is now around 1,2 and i'm increasing it if needed. I'll be checking the levels regularly from this week since all of the hydroponic systems are now running. I'm going to add some ice cubes in to the nutrient tanks to cool nutrient solution a bit always when I remember to, even though temperatures haven't been an issue so far. Can't do any harm so why not I quess. I'm also adding a CO2-bag in to the tent above the plants. Also I'll begin training my plants this week by topping them. Day 22 (8.11.) Lights are set to 70%, water pumps are now on for 24/7 (EBB's drain water is on lowest setting possible to avoid drowning the roots) and pH is 5,8-5,9 / EC 1,2-1,3 on every hydroponic system. I topped all of my plants and cut off all of the lowest leafs with single tips and some of the small nodes starting from them. Day 23 (9.11.) pH-level keeps on raising so I'm gonna be measuring it pretty often. I'm correcting it by adding some pH- while filling up the nutrient tanks with small amounts of fresh nutrient solution at a time. Everything's going well and I can't wait to flower these! Day 24 (10.11.) Lights are now set to 80% power at 70-75cm height from the tops. I cut off the rest of the lowest nodes which I had left to some of the plants while topping them. I don't think they would get enough light when they are bigger. Day 25 (11.11.) Removed the lowest (three-pointed) leafs of each plant. Day 26 (12.11.) I moved the Led's a bit higher (now at ~90cm above plants) and set them up to full power. Plants are now around 11-14cm height and growing like crazy! Day 27 (13.11.) The growing has exploded and these plants are getting bigger and bigger. I'm going to defoliate them lightly and remove the lowest nodes so the plants have around 6 nodes each going forward, hopefully I'll get an even canopy. Day 28 (14.11.) I changed new nutrient solution in to the EBB-flood system which has the Ayahuasca's on it. I'm keeping the EC at around 1,3-1,4 and pH at 5,8-5,9 on every system. Also added small amount of Cal-Mag in to both NFTs.

So this week after I gave it under nutrients I apparently gave it too much nitrogen while having a potassium deficiency. Shiney dark leaves, So i fixed that, but some didn't bounce back, and I tried nitrogen. I think they are doing pretty good considering everything I've put them through SO FAR. lol. Nutrients are NPK Raw's total lineup, follow their instructions at first, Fastbuds adjustments as of this week.

Hallo zusammen 🤙. Sie wächst sehr schön und macht keine Probleme. Rabattcode für den BIOTABS-Webshop https://biotabs.nl/en/shop/ GDBT420, damit erhalten Sie 15 Prozent

7a settimana di fioritura 💐😛 La ragazza della Super Sativa Seed Club sembra pronta per la raccolta! Purtroppo un paio di bud li ho dovuti buttare a causa di qualche brucho che li ha fatti andare a male... Il suo profumo è fruttato, intenso e dolce! 😋 Il prossimo week si raccoglie👍🏻

I have grown RQS a few times but this is my first RQS diary. The seed took 36hrs to pop and sprout in the wet paper towel. It only took another 36hrs to come fully out of the ground and loose it’s shell. I started with the lights 70cm’s from the soil which was giving a LUX💡reading of 25,000lux💡.Once the seedling 🌱 got to 5cm’s I raised the light by 5cm again to keep the distance at 70cm’s maintaining a reading of 25,000Lux💡 at the top of the seedling 🌱. On previous grows I started with the light at 80cm’s but I was getting stretching. I find if I start at 70cm’s and don’t raise the light after a day or two that the seedling 🌱 can get light burn. HUMIDITY: As you can see in photos I have milk bottle tops full of water next to the seedling. I’ve been this for a while now. I have my seedling next to a plant only a few weeks away from harvest so I need to keep the overall humidity low. I might be crazy and wasting my time but it makes sense to me. I leave these bottle tops near the seedling and over the space of a day the water evaporates off and then I refill them again with water (PH’d water). I reckon if the water is evaporating off so close to the seedling that it must be creating some extra humidity around the seedling 🌱. For the record I don’t think the earth 🌍 is flat. *I’m using RQS nutrients for this grow. I am recording the nutrients as 0.5ml as there is not a tablet option so what I mean by 0.5 is half of one tablet per 2ltrs of water. 🦍Day 3: Watered around the edges of the seedling 🌱 just to dampen the soil a bit 🦍Day 5: Dampened soil again. Looking good so far. 🦍Day 7: Gave very light watering. Happy with the height of the seedling 🌱. The light distance seems to have worked well.

I'm starting to see the colas pack on extra weight!

Plants reacted well to LST saw some awesome growth. They are branching out well, expecting flowering to start in the next 2 weeks. Haven’t defoliated yet trying to let em grow as much is they can without stressing her out too much

2 screws ups 1 fox farms is 2 hot switching to roots organic 2 the pot I put her in cracked when I tried to run lst wire threw it so we ended up testing monster cropping for the first time thus her height incredible smell like dank pop tarts I am dying for a test bowl then into the Grove bag she goes for 2 months next videos and pics in new diary will be better looking got another purple and a strawnana from @fastbuds @2fast4buds

Sponsored by: AMSTERDAM MARIJUANA SEEDS-💡VIPARSPECTRA💡-💐GREEN BUZZ LIQUIDS💐-🛠️WEDRYER🛠️ 28/7 cut made, clone in rooting. Monday entry into bloom 2/8 reacted well to the cut and has already recovered well. I hope for a nice big plant __________________________________________ Personal advertising (contains affiliate links) __________________________________________ 🦄 Professional site, exceptional genetics for over 25 years and a new and very nice mascot! ✅https: //bit.ly/Amsterdammarijuanaseeds __________________________________________ Did you know that Green Buzz Liquids fertilizers are 100% vegan? A complete line of products ready to give the best to each of your plants! Visit the site and see my journals to see how they work 🦄 🤯 And with the code "dreami t" you will immediately receive a 15% discount on your purchases ✅https: //bit.ly/GreenBuzzLiquidsPro __________________________________________ 👀 Are you looking for a good lamp to start with? 👀 🌞Viparspectra has something more than the others, take a look at their site. ⏩ Use "GDVIP" for an extra discount or "DREAMIT3" for an extra 5 %% discount 👀 Search for it on Amazon ✅Amazon USA: https://amzn.to/30xSTVq ✅Amazon Canada: https://amzn.to/38udUVe ✅Viparspectra UE: bit.ly/ViparspectraUE ✅Viparspectra USA: bit.ly/ViparspectraUS ______________________________________________ 🌈 Tired of blowing on your weed hoping it dries quickly? Check out the Wedryer website! You will find a well-made accessory that will help your weed dry in just 8-10 days without the annoying risk of finding mold or other annoyances! (no affiliate links) ✅https: //bit.ly/Wedryer_ ______________________________________________ 📷🥇Follow the best photos on Instagram 🥇📷 https://www.instagram.com/dreamit420/ Backup https://www.instagram.com/dreamit4200/ 🔻🔻Leave a comment with your opinion if you pass by here🔻🔻 🤟🦄💚 Thank you and good growth 💚🦄🤟

So I was in week 2 with the Cream Mandarin when I realized I was not happy with her growth for what I want her to do, and it was totally my fault, and not the Breeder, so I decided to re-start as to represent Sweet Seeds properly as they have sent me pretty much whatever I have requested. I was attempting to start seeds in coco coir, which was very tough to satisfy the coco with Cal-mag and not burn the seedlings in the process. So I started using ProMix seedling starter and have been very happy with it so far. The other issue I ran into was satisfying the humidity levels for my seedlings, and also keeping my flowering auto happy. So, my final decision was to purchase a small 2x2 tent to double as a seedling tent and a drying tent. I hooked up a little 4 inch exhaust fan, put a heat mat on the floor, a small fan, and a Spider Farmer SF1000, a hydrometer, and a humidifier which is keeping it around 70% RH even with the little exhaust fan running 24/7. The toughest part of learning to grow Cannabis for me has been days 3-17. Once I get there I seem to be good. If anyone has any tips please hit me up. Thanks for stopping by, be safe, and Blaze On!