Recommended
Likes
Comments
Share
@RFarm21
Follow
Week 27 december - 2 January Happy new year
Likes
6
Share
Started LST on day 14. Feeding the plant Seaweed extract. Light set to 50% (approx 48W) and height kept at 12" (30cm) above the plant.
Processing
Likes
8
Share
Likes
8
Share
@Octopot
Follow
Check out our video!! This week was week one, transplanting 3 cuttings into the Octopots with Grids/Liners. This is our first Research & Development grow here this year! Will the Lil' Girl take off? Maybe the Middle Child is strongest after all?! Or does maturity win it in the end for Big Sis? Come along with us while we have fun learning and testing theories!
Likes
16
Share
4/9/25 This plant is beyond frosty. Stacking up super nicely. Seems like she will yeild quite a bit. My only gripe is that she has like no smell at all. Using the foil as a soil cover is working quite nicely. the top soil is getting filled with roots quite well. Top dressed 1tsp of Bloom 1tsp microbe charge 1tsp bloom
Likes
11
Share
Might be experiencing some nute lockout I'll dial back the nutes even more to flush, flush, feed. Watering daily, the medium drys out almost completely every 26hrs and then she wilts. Lots of air flow in this setup with a fiber pot so just trying to keep it wet really. 1000w HPS is amazing in this small of space I could get 2 or three plants in here next time.
Likes
48
Share
SUMMARY: - I killed my first to tap-root seeds, I waited for them to grow "by the book" 0.5cm and I should have just planted, I saw them get worse and said "I must of messed up with something, lets wait another night until they bounce back" and instead they died. The next germination was super easy but my lights were too high, and the humidity was too low. All the fixes were done for the next weeks. Nov. 3 21:30 - dropped seeds into water 14:30 - get seeds into paper towel nov. 4 1:00 - seeds moved to damp paper towel nov. 5 18:00 - both seeds crack tap root emerging nov. 6 7:45 - both seeds tap root growing very long and thin, - third seed still not cracked 8:30 - both seeds placed into soil and watered lightly - placed into grow tent and LEDs turned on - 24H for the first day - 18/6 for the rest nov. 8 6:45 - first seedling spouted cotyledons leaves 13:00 - seedling (cotyledons leaves) looks droopy 19:00 - light moved down to 30” 23:00 - second seedling has reach the surface and started to sprout cotyledons - first seedling still getting taller - third seed still not cracked nov. 9 15:00 - both seedlings given 50ml of water - watered around the outside of pot - pH of water = 7.81 - pH of runoff = 6.31 nov. 10 - second seedling has created serrated second set of leaves and stretched up to same height, but much smaller than first seedling. Specifications:😎 Seeds: - 2x White Widow feminized seeds from Crop King Seed Tent: - 4x4x6 Mammoth Grow tent LED: - 2x Spider Farmer SF1000 LED (default 100 watt draw for seedling but will be bumped up to 125 Watt for flowering if not sooner) Pots: - 2x 0.5 L starter pots - 2x 5 gal smart pots after transplant Soil: - Pro-mix containing mycorrhizae and perlite, used for starter pots and mixed at roughly 1:3 ratio with Ocean Forest - Fox Farm Ocean Forest soil, used in the 5 gallon pots and mixed with roughly 3:1 ratio with pro-mix - note: pro mix was mixed thoroughly with ocean forest in the 5 gal pot, then pro-mix was used on the top layer, in and around where the transplant will be to help the early veg stage avoid getting too "hot" via nutrients. Nutrients: - Fox Farm Big Bloom - Fox Farm Big Grow - Fox Farm Tiger Bloom Inline Fans: - AC Infinity CLOUDLINE T6 6" (exhaust) - AC infinity CLOUDLINE S6 6" (active intake) - AC infinity 6" ducting Oscillating fans: - 2x Wind Devil 6" fans Carbon Filter: - 2x iPower Carbon Filter on both inline fans - note: carbon filter on intake fan as basement had mold issues in furnace room far removed but same floor, some mold issue in other room, cat litter in basement, thus, avoiding all risks and sleeping sound at night :) all mold was killed, scrubbed, cleaned, sprayed, painted, and sprayed again before setting up. Humidifier: - TaoTronics Cool Mist Humidifier Timers: - 2x Kuman 15A/1800W 24-Hour Digital Timer Overall: Good start to the grow, germinated 2/3 seeds, both growing and healthy. Both seedlings have developed their cotyledons and although they initially were quite droopy, they often bounce back to a decent upright/natural position. Third seed is undergoing "emergency germination" for the next 2 days as it experienced identical conditions to the other healthy seeds yet failed to germinate, likely due to its unviable nature. Waiting for extension cords to lower the lights further and a humidifier to hold rH steady in the next day or so. The seedlings appear to be reaching up for the light, stretching, but it appears to be within the acceptable range as they are upright and sturdy. The seedlings often get a little droopy, it is likely that this and even the stretching can be blamed on low humidity, temperature swings between low 60's up to 81 F. Nov. 2 - I killed 2 germinated seeds by waiting for tap root to grow to 0.5cm. - note: tap root looked great but was quite short so I waited another day for it to grow as instructed, the next day it looked like it had suffered, I assumed it was something I did like too damp, or too dry, but it really just needed to be planted before tap root grew to 0.5cm. So i waited another day to see the bounce back this time carefully ensuring right amount of dampness but when i looked it was clearly dead. RIP 😭 Nov. 3 21:30 - dropped seeds into water 14:30 - get seeds into paper towel nov. 4 1:00 - seeds moved to damp paper towel nov. 5 18:00 - both seeds crack tap root emerging nov. 6 7:45 - both seeds tap root growing very long and thin, - third seed still not cracked 8:30 - both seeds placed into soil and watered lightly - placed into grow tent and LEDs turned on - 24H for the first day - 18/6 for the rest nov. 8 6:45 - first seedling spouted cotyledons leaves 13:00 - seedling (cotyledons leaves) looks droopy 19:00 - light moved down to 30” 23:00 - second seedling has reach the surface and started to sprout cotyledons - first seedling still getting taller - third seed still not cracked nov. 9 15:00 - both seedlings given 50ml of water - watered around the outside of pot - pH of water = 7.81 - pH of runoff = 6.31 nov. 10 - second seedling has created serrated second set of leaves and stretched up to same height, but much smaller than first seedling. Summary of week: - A rocky but good start has resulted in 2 healthy seedlings with a decent set of serrated leaves. - MY growing pains and on the fly adjusting of grow tent climate likely resulted in a little bit of a tough week for the seedlings. LED hanging too high likely off the start (started at 60" and got as low as 30"), low rH (going down to as low as 40% and never really getting <60%), and poor temperature fluctuations (going as low as 61F early in the morning when the lights go off for 8H and as high as 81F when the lights are on for some time). - Luckily these factors did not do much damage but in all likelihood just resulted in a slower growth rate. - After initially planted into damp soil, I only watered once, with only 50ml for each plant and mostly watered around the edges of the pot.
Likes
48
Share
@Mtmtc
Follow
Enjoyed growing these two plants. they responded well with lst & I defoliated them a lot along the grow. One of them did bulked more than the other, but I’m happy with the end result 💪🌱
Likes
47
Share
🌱Welcome to my 2 x 4 ft autoflower tent. Who else is stoned as fuck? Here we have Fast Buds tester 2210. We just finished the 3rd week of flower and holy shit she's getting tall. Last week we saw her shoot up 7 inches. This week was 6 inches. That's almost an inch per day! she is now the tallest in the tent and taking on more of a sativa hybrid structure. She is looking like she's about to put on some huge flowers 😌💨 💧She has been receiving water every other day about 1 L of pH adjusted to 6.5. ✂️ TRAINING: N/A. 💡⚡Check Mars Hydro out on Instagram! @marshydro_aliexpress2 💡⚡
Processing
Likes
3
Share
Now that the plant has started flowering, I defoliated the excess leaf, focusing on apical buds. But unfortunately after defoliation and pressing the lst unfortunately plant b5 breaks the stem in its main apical bud. I was very sad but in life we have to learn from mistakes and stop complaining since the other 4 plants show good growth and vigor we will move on trying to minimize the errors.
Likes
5
Share
@RastaRick
Follow
Tok off large fan leaves on day 24. Seeing preflower starting. Decided to try out a natural shape instead of doing LST. I hope this doesn't backfire... The blackberry gum on the right is getting big. I like how autopotamus has natural shape... But he also has much more light haha
Likes
15
Share
@HeavyHead
Follow
Last week for these ladies. Kept the soil moisture levels very low leading up and did a final heavy de leaf of pretty much anything that doesn’t have trichomes growing on it and will be shutting the lights and turning the heat off for the last 48 hours. Keeping a lot of the sweet leaf on to keep the moisture throughout drying and will do a dry trim. Will be aiming to have a long slow drying period (12-15 days hanging) before I jar them up for curing. Won’t be adding many quality pictures this week since half the time they’re in the dark but will post harvest pictures as they come down :)
Likes
10
Share
I really slacked at the end of this grow, my schedule changed drastically in the last month and I was unable to really take care of her the way I wanted. She yielded a 56 grams exactly.
Likes
19
Share
Day 64 02/09/24 Monday Feed today using de-chlorinated tap water pH 6 with calmag. Day 66 04/09/24 Wednesday De-chlorinated tap water pH 6 today only. Smell is really coming on strong now!! Day 69 07/09/24 Saturday De-chlorinated tap water pH 6 only today. Depression has hit, so has mould 🤦‍♂️😔 Had to chop her main colar, and two sides, so the overall production will be more than halfed... But I will finish diary off till she completes. I hope I saved her
Processing
Likes
21
Share
Fed once this week with a weak feed including top max. I use kombucha vinegar as pH down. Water from my tap is ph6.8-7.0 and 38-42ppm so I might start using calmag supliment as the ppm at my old house used to come out of the tap at ph7. 2 and 200-220ppm. I had 2 plants that didn't like the light at 30000 lux and started bleaching so I took them out. I've defoliated today day 35 as humidity was getting over 80% and also to let light to the lower bud sights. Pre flower pistils showed on some plants around day 33 (some still have none) so I'll consider this the end of veg start of flower. The kalimist indica pheno is still not showing pre flower pistils but is always hard to force flowering when it's not mature for some reason. It's always 7-14 days behind everything else 🤔
Likes
30
Share
@Xpie77
Follow
Seeds Genetics provided me this Strain to make a Growers Diary. This is the first time I'm growing a Durban sativa strain. Got 9 seeds from the 10. Can happen. Will germinate the seeds in a paper towel. This always works for me. 💸💸💸💸💸💸 Buy seeds from Seeds Genetics Co. Copie the link doen below! https://seedsgenetics.nl/product/durban-poison-gefeminiseerd/
Likes
5
Share
Hi people, how are you all???? Week 7 here, and all is good with the plant, I did some defoliation to keep the airflow, and I got a ScrOG to open the plant a little bit to get more light. I am very happy with the results until this stage, is a whole new world for me :-) Thank you for following me. Peace and love! :-)
Likes
2
Share
@UrbanBoer
Follow
I am not happy with this strain, but I blame myself, I dried it to quick, allowed a lot of airflow in the dry closet when I should of kept the airflow as minimal as possible, slower you dry the bud, the better the result when it it comes to bud size, aesthetics, aroma, smoothness and when smoking it, the taste on your pallet will be fantastic. However I am hopeful when I bake this strain, I will be amazed 😇