Como podemos ver ya todas están para el corte o casi, en algunas tendré que seleccionar el pheno, ya que hay alguna que me gusto más que la otra, en general un terpeno muy diferente en cada variedad y también la calidad de la resina, en general mucha resina, pero por ejemplo he podido observas que los tricomas de la Gorilla Melon son más grandes y se oxidan de una manera más lenta, ideal para hacer extracciones, en cambio, la Reinbow Melon .... ese terpeno dulce intenso tanto que es hasta abrumador...me muero de ganas ya de probarla... la Lemon Mandarín es exagerado el olor que tiene a mandarina si cierras los ojos y ueles fuere parece que te vayas a comer una buena mandarina y la Paya Sherbet tiene un olor dulce y muy agradable, pero nada que aún pueda relacionad del todo..... un saludo y buenos humos fam.

Hello my fellow Growers👊 It was another Great week for the Kush Fromage 🙌 All the pictures were taken on Sunday, which was Day 42 of Flower. She is really starting to reek the whole area up. It is a very earthy kush like smell with fresh grapes on a grapevine mixed in, it's a very unique smell😊 She is supposed to be a very heavy resin producer and have a high THC and CBD content. Anywhere from 18-26% THC and ~3% CBD according to the breeder. I can tell you this it is one very very resinous plant😵 even the fan leaves and smaller leaves that have no trichomes on them have developed an oily resin on them. It's awesome so I can definitely say it is a heavy resin producer. If a sugar leaf touches another leaf you can see an oily resin where it touched it, my fingers get sticky just from the fan leaves👍The breeders estimated time of Flower is around 63 Days. So we got a few more weeks to go!! I hope the buds will fill in a good bit more but I am not counting on them getting huge due to this strain being more on the quality over quantity side of things. It's not a bad producer and I'm sure they can get some pretty huge flowers on em, but I have seen plants that can produce way more, but this strain makes up for it in its potency and resin production. Plus I personally like the Quality over quantity strains. Though at least nowadays its nice that we have a lot of strains that are a nice compromise and have great yield while also having great quality😎 Thank for stopping by and checking out the Grow👊👍 Happy Growing an plentiful Harvests to you all!!🙏

I received the clones from An out of province breeder. It reached me after three days of driving on the road with no light. Their future was not certain. I didn’t think I would need that many fans for the clones because they are so tiny, I figured they didn’t need that much maintenance. I was 100% wrong when I’m working with this many plants. I ended up getting mild mildew on top of the soil on the first week because there was barely any air circulation. At this point I didn’t have any Ventilation put up yet. And one fan on the floor. I ended up installing three fans in one room. No issues

Welcome to Flower Week 5 of Kannabia Clementine Slush BioBoost Edition Need a Fail-Safe Germination and Express Flowering?Kannabia Makes It Easy with BioBoost, Sproutly and Its Fast Genetics . More informations to find at The Kannabia Blog on GrowDiaries. Check out Kannabia Seeds with my link [https://www.kannabia.com/de?ref=61966] and grab the germination device or the strains I used . Trust me – it’s worth it for sure ! Get another 20% Discount at all products using the code [GGD] at the checkout For this Project , I’ve chosen the Feminized Photo Strain Clementine Slush BioBoost : Here’s what I’m working with: • 🌱 Tent: 225x150x150 • 🧑‍🌾 Breeder Company: Kannabia Seeds • 💧 Humidity Range: 45 • ⏳ Flowering Time: 65 Days • Strain Info: 21%THC • 🌡️ Temperature: 26 • 🍵 Pot Size: 20 • Nutrient Brand: Hy-Pro • ⚡ Lights : 600W x 2 A huge thank you to Kannabia Seeds for allowing me to try my Best with this amazing collection from Photo Strains they managed to Sponsore . Big thanks for supporting the grower community worldwide! Your genetics and passion speak for themselves! Let’s grow together – and don’t forget to stop by again to see the latest updates! Happy growing! Stay lifted and stay curious! Peace & Buds!

Hey everyone! 👋 It's week 9 and the girls have really impressed me! 😵 The plant that's on the back of the tent (or the one closer to the timelapse video) was the most troubled one of the two (long leave stems, tons of branches, their leaves weren't very strong) but this week something happened and she stretched a lot, it was shocking! Perhaps she was stunned or something was affecting her? No idea but she even responded really well to the defoliation I did! (and to be clear, I did a lot of defoliation 😝). Her sister on the other hand was just developing well and it's clear she's a little more ahead. One important thing that I realized this week (and I completely forgot) is that these plants are autos and their flowering phase is shorter compared to the ones from a normal feminized plant. So regardless of which plant might be ahead of the other I decided to start feeding both of them (not full dose!) with my NP nutrients. Hopefully both will receive them well! And that's all for now. See you all in the next update! 💪

Last week🥦😉💚

F week 4.

27 days into flowering now. These girls are still stretching, hopefully there done now! I was playing with my light rail mover a bit and experimenting with timings and I think this contributed to it. They definitely got away a bit on me. Lol No biggy, just had to weave a couple more branches through the top screen, canopy is not quite as even as I would have liked, but should still be a good harvest. My HPS light penetrates down to the second screen fairly well in most places I think though. I seem to have 2 phenotypes, 3 are stretching up and skinnier leaves, but 1 is staying lower and has big fat leaves. Dropped my nutrients a bit last week and they seem to responding better. Buds are developing nicely and are ramping up daily. Still running my light at 750w, debating on turning my light up to the full 1000w to get more light out to the side buds but I’m already exceeding 75000 lux on the canopy directly under the light. Not sure how this works with my movers, but I think I’m still gonna play it safe for this next week. Happy growing everyone! Cheers💨

Super frosty ☃️

.

The F.S is the densest plant I have ever grown leafs are bigger than hands. HASNT pre flowered yet. Site is slow so i stop typing

Chà chà, thời gian thu hoạch của hãng là 63 ngày. Nhưng có vẻ những chồi đã chín sớm hơn dự định, những hạt trichhome cũng đã chuyển sang màu hổ phách. Có lẽ 1 tuần nữa tôi sẽ flush và thu hoạch.

Bonjour à tous les padawans et les maîtres jedis Pour cette semaine 3 au seizième jour ma plante fais 15 centimètres et son sixième noeud apparaît je décide donc de pratiquer un LST sur ma plante. Pour ce j'utilise du fil de fer galvanisé que je plante directement dans le substrat en faisant attention de ne pas endommagé les racines car n'oublions pas que ce qui pousse dessus pousse aussi dessous. Jour 17 je pulvérise (dessus et dessous les feuille) une solution composé d'une cuillère à café de savon noir mou dilué dans un litre d'eau en prévention d'éventuels nuisibles. Je répète l'opération une fois par semaine jusqu'à la floraison. Je corrige mon LST suivant la pousse de ma plante ... Pour ma par c'est la manière dont je procède mais petit rappel de la technique du LST: Quand commencer à appliquer la technique LST De nombreux cultivateurs commencent la manipulation dés que les plantes possèdent entre 3 et 6 nœuds ou une paire de feuilles. Durant cette première étape de la croissance, le tronc encore flexible est pliable sans risque qu’il ne se casse, même si au fur et à mesure du développement de la plante il sera de plus en plus difficile de le plier. Nous pouvons continuer à guider la croissance des branches durant toute la culture, même durant la floraison, ce qui pour cette étape représente un grand avantage face à la taille, qui n’est pas du tout recommandé une fois que la formation des têtes commence, cela stressera en effet la plante, ce qui aura pour effet de retarder la récolte. Comment appliquer la technique de guidage LST Si nous sommes prudents, la flexibilité naturelle des fibres du cannabis permet de plier leur tronc et branches avec une relative facilitée, même durant la floraison des plantes. En utilisant une corde fine, nous pouvons accrocher la pointe de la plante à la base du pot par exemple ou à un tuteur que nous aurons planté dans le substrat. Nous plierons le tronc avec précaution et nous le fixerons avec la corde, à partir de là, nous pouvons augmenter progressivement la tension de la corde, chaque jour un peu plus, jusqu’à obtenir la position souhaitée. Soyez attentif à la réaction de la plante, essayez de ne pas appliquer trop de pression sur la corde et rappelez-vous que la flexibilité des branches peut varier d’une plante à l’autre. Pour obtenir de meilleurs résultats, il suffit de suivre quelques règles simples. Pour commencer, nous devons choisir une corde fine mais pas trop pour ne pas blesser les troncs au fur et à mesure qu’ils grandissent et qu’ils deviennent plus gros. Nous pouvons utiliser des crochets en plastique souple ou de n’importe quelle autre matière flexible pour éviter d’endommager les plantes. Spécialement en intérieur, utiliser des cordons en plastique de couleur (voir les diaries de @Silky) est très pratique pour voir facilement les accroches et faciliter le travail au milieu du réseau formés par les cordes, les tuteurs, les mailles ou les supports que nous aurons dans la culture. Bien entendu, en culture extérieure et surtout en guerilla nous ferons juste le contraire et nous utiliserons des matériaux de couleur qui n’attirent pas l’attention pour que notre jardin reste discret. Pour stresser les plantes au minimum, la mieux est de réaliser ces manipulations le soir ou juste après que les lampes en intérieur s’éteignent, ce qui leur permettra de se remettre durant la nuit. Normalement, le jour suivant nous pourrons observer comme les pointes des branches que nous avons pliées se dressent de nouveau vers le haut à la recherche d’une source de lumière. Que la force soit avec vous💪 Que la force soit avec vous

One of 4 strains grown together in 0.36m² using Migro Array 2 (125W). Variable dimming: W1 60%/24h, W2-10-11-12 60%/20h, W3-5-8-9-13 80%/20h, W6-7 100%/20h. Average real consumption: 95W with 173.6 kWh total. STRAIN: Divine Seeds genetics - underrated breeders producing excellent quality! NUTRIENTS: Full Biotabs bacterial line - positively surprised by the results! Organic living soil approach. GROWING APPROACH: Focused on DLI (calculated from Migro’s PAR map), VPD, water temperature, and water resting time. Did NOT monitor pH, EC, CO₂, or use PAR meter. MY BEST HARVEST SO FAR! 🏆 COLLECTIVE METRICS (4 plants total): • Total dry weight: 210g (+ 10g bubble hash) • Total wet weight: 890g • g/watt: 2.21 (or 2.31 with hash) • g/m²: 583 (or 611 with hash) • Average per plant: 52.5g Individual weights: Fractal 55g, Northern Lights 54g, Black Opium 67g (best performer!), Moon Rock 34g. Dense and resinous buds. Additionally grew 3 outdoor plants (Fractal #2: 21g + 60g frozen, Northern Lights #2: 14g + frozen, Black Opium #2: 50g fresh frozen) - not included. ~300g frozen trim (indoor+outdoor) yielded ~10g bubble hash. Good luck to everyone in the contest! 🍀

This is the before picture of when i went on vacation for a week to what I came back to. Needless to say I was ecstatic! My very first buds grown all by myself! I am germinating a 4th plant be this week as I had an 0/3 on germinating Gorilla Cookies from Herbies. I'm starting to grow 1 more Amnesia Haze in the tent this week as well.

Deoliated and trained! Even did a little video showcase! In love with this round from Fastbuds!!!!! Gonna get a great harvest!

For LIQUIDS & NUTES ******GREEN BUZZ NUTRIENTS***** organic. Also i’m using their LIVING SOIL CULTURE in powder form! MARSHYDRO ⛺️ has large openings on the sides which is useful for mid section groom room work. 🤩 ☀️ MARSHYDRO FC 3000 LED 300W 💨MARSHYDRO 6” in-line EXTRACTOR with speed-variation knob, comes complete with ducting and carbon filter.

lowered the ionbeam lights and adjusted all lighting to get even 20k lux everywhere.

An in to soil she and her sister testers go, i know that for know everything looks the same , apart from the photos, but this will start changing with them growing. For now all of them are growing pretty much the same and now that they move in to soil and start feedings they will start showing the phenotype and genetic differences, but for now all looking great , healthy and strong af!!! Haded a intro video from seed in to now, including how i transplant and what i use wen doing it so, and from here the moon is no limit for this babes i believe , so stay tuned as this testers they promise to be a interesting ride <3 <3 <3 She is moving fast and from all the tallest so far <3 <3 <3 need to keep this one under close attention <3 <3 <3 As always thank you all for stoping by and for supporting me on this journey, i am super passion about growing and fell blessed to have you all with me on this new journey <3 <3 <3 Genetics - Fast Buds Tester 08 09 10 11 Ligth - LUMATEK ZEUS 465 COMPACT PRO 
Food - APTUS HOLLAND #aptus #aptusplanttech #aptusgang #aptusfamily #aptustrueplantscience #inbalancewithnature #trueplantscience #fastbuds #dogdoctorofficial #growerslove With true love comes happiness <3 <3 <3 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so <3 <3 <3 
All info and full product details can be find in can find @ https://2fast4buds.com/ wen released 

https://aptus-holland.com/
 
https://autopot.co.uk/ 

https://lumatek-lighting.com/ <3 <3 <3 Growers love to you all <3 <3 <3