Im coming closer to the ✂️ time, i tried some pics without the lights on to show a more realistic approach of how plants are evolving besides al the self inflicted plages and nutrients burn , i can wait to the plants mature while im searching for the 🕵️‍♂️to check if thricome ratio should be mostly amber ... Because fuck im such a sedative whore, big gaz leaks homies!!!!

Day 27- day 1 flower Flip to 12-12 Day 28-day 2 flower Calmag -0.8ml Coco A - 1.5 Coco B- 1.5 Roots -0.2 Day 29-Day 3 flower Calmag -0.8ml Coco A - 2.5 Coco B- 2.5 Active boost -2ml Roots -0.2 Day 30- Day 4 Watered Coco A - 2.5 Coco B- 2.5 Active boost -2ml Roots -0.2 Day 31–day 5 Watered Day 32– day 6 Watered Day33- day 7 Watered Day 34-8 Watered last night so nothing today Day35–9 Watered Day 36-10 Watered Day 37-11 No feed, Day 38–12 Fed 1.5L Day 39-13 Watered Day40-14 Fed pk Day 41-15 Fed 1.7 coco a 1.7 coco b 2 ml boost 1 ml Pk Day 42-16- started adding pk Fed Day 43-17 Fed Day 44-18 Fed 600 ml just before lights out 1L lights on Day 45-19 Fed 1.6 L Day 46-20 Fed 1.5L Day 47-21 Fed 1.5L Day48-22 signs of potassium deficiency so keeping the food levels up for few more days , started with light feeding but now doing heavy feed chart . -Starting to give off a berry and gas smell . Day48-23 Fed 2L She’s thirsty today . Usually start to see runoff after 1.2 Lbur nothing Ml/L Watered 2.5 coco a 2.5 cocoa 2 sumo boost 2ml by accident instead of 1 Day 49-24 Fed 1.5L Day 50-25 Skipped feed to try lower humidity Day 51 Fed 2 L but no run off . Think she’s thirsty from no water yesterday . Will do another 500 ml to see run off if not I’ll leave it at that .

Had too much nitrogen last week, so I lowered the amount of FloraMicro. What's your thought on my first grow? Trying to learn as much as possible!

Nothing has realy happened since I cropped the royal cream....It is just hanging. Decided to do a dry trim so that it takes longer to dry due to the fact I am having to just use my cupboard so the humidity is pretty low. Leaving the leaves on just means It takes longer to dry. I am going to crop the Easy Bud in the next few days when the mood takes me. I had 4 left over R. Cream seeds left over because I informed them that. bought 2x 3 packs and only 2 seeds germinated so they sent me another packet which is REALLY good of them and the sort of thing that means I would definitely use Royal Queen Seeds again, for sure! The trich's are basically all cloudy with a few clear. I cant see any amber but my loupe is a ridiculously cheap Chinese piece of crap. I will invest in a microscope camera so I can hook it up to my phone or MacBook. It is way too hard to keep everything steady In order to see what is popping with my sexy trichomes. Obviously feeding has stopped for about a week now. I forgot to change it In the diary last week so will try and correct that now.. I know it is not strictly relevant but I had to go somewhere earlier and took a video because I was able o walk in the middle of a main road in my town which Is usually packed full of cars, especially at the time I was walking on it. It is a time that makes me even more glad I grow my own. I really need to buy the bigger tent, lights and re-locate to the bigger, more subtle cupboard (not the one i am using to dry my weed in the video I posted) and then I will be able to effectively ScrOG the 2 or 3 plants I have, in order to maximise yield so I can be totally self sufficient with regards to my cannabis medicine. UPDATE - MONDAY I just realised I have made a proper idiots mistake an missed out on some much tastier buds because of it. OK, so I got paid today, so I though I would treat myself to some of them cheap COB chips I used for my last grow because hey were super cheap and actually really effective considering the price. I ordered 2x 100w 6000k veg spectrum chips with a solderless connection for my power. I also ordered one of these heatsink + reflector. https://www.amazon.co.uk/gp/product/B01MT824NP/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 My thinking was that I have a spare heatsink here that the old citizen CLU-048 is attached to so I was going to fit one of the chips into that and the other into the heatsink and fan I bought. This hought process lead me to go ad retrieve the old citizen LED and I thought I would try it. Still didn't work, then suddenly I thought it could be a simple blown fuse so I changed it aaaannnnd.....still doesn't work. doh! I started to remove the COB holder and COB from the heatsink (it was just glued to it using thermal compound) and when I laid it on the table I decided to test the driver without the COB holder on the tiny off chance it might work...nope I then realised maybe I got the + and - the wrong way round, tried again and boom works perfectly. The connection from the holder to the cob had bent slightly off contact. Really annoying that this whole time I could have doubled my photons to the plant, however, really nice that I don't have to spend a load more money on lighting in order to upgrade into the new room. So all I have to do now is spend money on a pre-drilled heatsink and a new metal COB holder for the citizen.

Perfect tropical-like weather. No problems to report. Excellent growth. Still rearranging net tent as this bastard stretch a lot. The one that should have the fastest flowering is, on the other hand, terribly late compared to het sisters. But how long does this beast still want to grow? Royal Queen Seeds officially claims Pineapple Kush is better suited indoors than outdoors, for now RQS is wrong.

Very optimal setup for everything so far. you can really tell the first sprout apart right now because of the second set coming in. Can’t wait to start using nutrients soon!

Just that color. Wow! It is so nice. I love it, My personal favorite 😍. Looks happy :) so I am happy.

Took the cut as I said I would got 6 off the galato and 4 off the MCMOG....it amazing how 2 becomes more would have more tree of the same to cut nxt cut🔥🔥💨💨💨

Week 2 of Flowering plants are doing there final reach. I defoliated one plant that is out of control growing fast..lol.. in hopes to stunt it a little . Everything is going well I'm very surprised at how much nutrients these girls need. I feed them every watering or they start to wilt and yellow. Crazy .. I might try to slow that down now that the leaves are very rich in green color. No signs of burn only deficiency Wich I corrected by feeding them every watering.🤷

all in all a good strain that stays small and compact. Taste is not my personal favourite but it grew without any complications.

Blütewoche 8 – King Juice kurz vorm großen Finale Zeitraum: 10. Juli bis 17. Juli Blütetag: 49 bis 56 Blütewoche 8 ist durch und langsam wird's ernst. Die King Juice steuert ganz klar auf die Zielgerade zu. Ich hab diese Woche nicht viel verändert. Ganz entspannt gegossen. Temperatur und Luftfeuchtigkeit kontrolliert. Der Wert lag zwischen 50 und 64 %, also alles im grünen Bereich. Einmal hab ich leicht entlaubt, damit die Luft besser zwischen den Buds zirkulieren kann. Zusätzlich hab ich noch einen Mini-Luftentfeuchter in die Box gestellt. Nicht das die Luftfeuchtigkeit doch nochmal höher wird als gewünscht. Gegen Ende der Woche gab’s dann nochmal eine ordentliche Ladung Wasser, insgesamt 8 Liter und auch die Würmchen haben was zu knabbern bekommen. Die Buds reifen weiter aus, und unter dem Mikroskop sieht man schon was. Einzelne Trichome verfärben sich von klar zu milchig und zum Teil schon leicht bernsteinfarben. Es ist noch dezent, aber der Prozess ist ganz klar im Gange. Ich schätze, eine Woche braucht sie noch, um richtig fertig zu werden. Wenn alles so weiterläuft, wird nächsten Donnerstag geerntet. Ich werde das natürlich noch ein paar Tage weiter beobachten und mich dann endgültig entscheiden aber mein Gefühl sagt, nächste Woche ist es so weit. Die Buds sind der Wahnsinn, richtig schön fett, kompakt, steinhart und voll mit Harz. Sie glitzern, kleben wie Sau und verströmen einen unfassbar fruchtig-süßen Duft 😍 Und was auch cool ist, ein paar Blätter haben sich leicht ins Lilane verfärbt, nicht ganz so stark wie bei ihrer Mutter, aber da geht vielleicht in der letzten Woche noch was. Mal sehen, bin gespannt. Ich kann mich ehrlich gesagt kaum sattsehen. Es ist einfach jedes Mal wieder ein Genuss, die Box aufzumachen und diese Pracht zu bestaunen. Ich bin super happy mit der Entwicklung und freu mich riesig auf die letzte Woche 😊

Herzlich Willkommen zurück! Nach Blütewoche 1 und dem wiederkehrenden runterbringen der Triebe unter dass Nett ist nun Zeit, die Pflanze ihre Arbeit tun zu lassen. Ich hab die Pflanze jeden zweiten Tag angepasst, wieder unter das Netz geflochten und entsprechend die Blätter und Triebe unterhalb des Netzes abgeschnitten. Somit kann die Pflanze die Energie in die oberen Triebe leiten und sich prächtig entwickeln. Das ist mein zweiter richtiger Scrog Grow und aus dem ersten habe ich gelernt, dass Mann nur bis Blütewoche 1 runterbinden sollte. Danach ist es wichtig, die Zeit des Stretches quasi auszunutzen um die freigelegten Triebe sich in Ruhe entwickeln zu lassen. 💚

Week 1

Hi guys sorry its late. Day 12 of flip to 12/12 now and the ladys are loving life, stretching away lots of bud sites. Still another 10 days togo until I do a major defoliation on them.

The gals are still loving the fc4800 and their new 8x8 mars hydro grow tent as much as I do👍 leaves are sticking straight up towards the light. Love how easy the zippers are to open and close. Nice and strong and guaranteed to last. It has extra material on the backside of the zipper that helps for light leaksand enough ports and vents for anything you need in it👍. the tsw2000 is still going strong and is also a very good light. Its been going almost nonstop for 6 months and still working the same as when I got it👍. not much heat off both lights but the fc4800 is alot cooler and the heat-sinks work extremely well. I have it daisy chained to the tsw2000 and 1 dimmer controls the other and i don't need to be reaching in too far to dim the other light, it's awesome and I can't wait to buy more lights to daisy 4 together👍. I would recommend this light to everyone that grows with leds and have trouble with temperatures getting too high. Even if you grow with HPS lights I think any mars hydro light is a MUST TRY. I like how heavy both lights are because I know it means they are built soild and strong 💪. Very good sign with the frost they are starting to get thanks to bith mars hydro lights. I can notice more frost under the fc4800 and I'm thinking it's from the UV DIODES they put on the fc4800 👍. 2 days ago they all smelt like my nuken, sweet marshmallows. But now I can smell the monkey dough and gorilla glue and skunk monkey coming through👍. I touched a bud on the gorilla and monkey fingers smelt like fruit loops👍 really pleasant smell. Lingered on my fingers for atleast 30 min. I'm glad mars hydro is under priced compared to some brands and for how popular they are. usually companies would charge more. Thanks mars you guys are awesome 🤘🥁🎸. I'm getting a new exhaust fan soon. An 8 inch that will work alot better than my 4 inch lol. Wayyy to small for a 8x8 Grow Tent. Dehumidifier is going almost non stop to try and get the humidity down. I love how both lights on 100% power only raise my temperature 2 or 3 degrees 👍. You can rest your hand on the lights and not much heat comes off them. Obviously there is some heat but for the brightness of the lights and only raising the temp that much is awesome 👌.  And if I wanted to I could remove the driver from the fc4800 and run it on the outside of my tent because the cord is so long but 2 or 3 degrees is barely nothing👍. The girls are starting to bulk up abit now and only 3 weeks of flowering, these lights are awesome 👌.  My last run of monkey dough and gorilla glue didn't start showing alot of crystals until week 4. These were only 2.5 weeks and I started noticing some frost. Next week I will be able to tell more about what these custom bred seeds will be like. I love how the smell is changing now. Didn't want all them to smell like nuken marshmallows lol. It's awesome that I can get right inside the tent to do any work i need👍. Even if I wanted an 4x8 tent. I'd rather this 8x8 because it's so easy to work with the plants and have so much room to move around and massive headroom when I'm in there chillin with the gals🤣🤘. FOR EVERYTHING MARS HYDRO VISIT: Www.mars-hydro.com PROMO CODE: rocknroll Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA Thanks for taking the time to read and check out my shit🤜🤛 GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍  

Was a good learning experience. I'm not going to get near the weight I expected from these, and though the bud turned out really tasty, I don't think I'll grow it again. I'm not sure I would recommend to a newbie. It was in some awesome living soil, but some deficiencies crept up in flower, and I wasn't impressed with the roots upon post mortem exam. On second look, even the photo on msnl's site shows some spots that looks like deficiencies. Definitely some grower errors here, but all of my ongoing grows faced the same challenges and these just seemed less adaptable. Anyhow, I've been graced with some clean meds for now, and I'm a happy growin hooman. 👽 I also probably won't do any more autoflowers moving forward. Just not my style. There are some great peeps doing outstanding work with autos though. Best to them and all! :) D82 - 12.12 - cut the second auto cheese yesterday. Let her go as long as I was comfortable. Think her run in with the gnats resulted in the the deficiencies. Awfully covered in trichs, so it should make for tasty smoke after dried, trimmed and cured.. Shall update

Welcome back to all, brother gardeners! WE WANTED TO CELEBRATE WITH YOU OUR 3 YEARS OF AGRICULTURE ON THE PLATFORM. GREETINGS TO THE FRIENDS OF @GROWDIARIES WHO MADE THIS POSSIBLE! My sweet biscuits grow beautifully and today we added a containment net as their stems seem to stretch too much under the light Best regards LA REINA PEAKYPLANTERS