This week was amazing guys. I literally watched the buds getting fat day by day. I am still feeding with a similar program and adding Aptus Regulator once per week to boost silica and some other minerals like molybdenum and boron. I'm flowering my plants in a hot environment with CO2 boost. PPFD is high to support these settings and thankfully my the pots aren't getting hot. No fungus gnats or any other pests, no root rot and bad smell. Everything is perfectly neat and buds are exploding. My expectations from this harvest is really high and I'll keep adding CO2 for another week. Some fellow growers asked for CO2 and PPFD measurements. I am sharing these information on this week's pictures. I got my CO2 meter fixed and I tested the CO2 PPM in different places of the canopy. Typical value for this grow tent with this CO2 setup is around 1100-1350. Temperature is fluctuating between 28-31 and the average PPFD on the bud sites is 1100 micro moles. I'm sharing CO2 measurements right under the fan, where you expect it to show the lowest value. Then I'll also share the CO2 PPM value coming out from the air pipe, which is normally attached to the grill of the fan. Direct output is now around 5500PPM and in the first two days, the meter shows 10000PPM which is the max value that it can reads. This bucket yeast CO2 reactor lasts for four days and I'm refreshing the mixture twice a week. This is huge CO2 with a fairly low cost compared to propane burners or CO2 tubes. Edit: I refreshed the CO2 bucket today and got you guys a video of the direct output. The system is outputting more than 10000PPM of CO2 and the meter can't measure it for the first two days. This CO2 method is a killer one for tent grows. Very low cost for very high CO2 concentrations. Hope these information helps. Happy growing 💪

Welcome back to all, brother gardeners! WE WANTED TO CELEBRATE WITH YOU OUR 3 YEARS OF AGRICULTURE ON THE PLATFORM. GREETINGS TO THE FRIENDS OF @GROWDIARIES WHO MADE THIS POSSIBLE! My sweet biscuits grow beautifully and today we added a containment net as their stems seem to stretch too much under the light Best regards LA REINA PEAKYPLANTERS

Very easy to grow, amazing aromas very mango strong tropical smell, very delicious, just like her sisters, I think it's a very stable genetic because 3 out of 4 were purple and the 4 of them have the same mango smell, very good automatic strain! 🌱 💚 💎

Gracias al equipo de Fast Buds, Marshydro y XpertNutrients sin ellos esto no seria posible. 💐🍁🍋🍊 Lemon Mandarin: Esta variedad es para los amantes de todo lo grande. La Lemon Mandarin es el resultado de nuestro trabajo de cruce de dos deliciosas cepas cítricas: nuestra matriz Lemonade cut y la Tangie (selección de Crockett's Family Farms). Nos aseguramos de que se combinaran los mejores atributos de sus padres, como un efecto eufórico y vigorizante, una producción de tricomas demencial y un perfil de terpenos cítricos agridulces. La Lemon Mandarin es ideal para los amantes de los árboles enormes y los rendimientos XXL: puede alcanzar alturas de hasta 200 cm, mostrando una resistencia extrema y muchas ramas laterales. Su aroma es una mezcla perfecta de la Tangie, cáscara de limón y la dulzura calmante de la mandarina madura, que envuelve los sentidos en una fragancia profundamente picante de mandarina-limón que perdura mucho tiempo después de fumarla. Se comporta perfectamente tanto en interior como en exterior, y su impresionante crecimiento y encanto aromático la hacen ideal para los cultivadores que buscan una cepa realmente excepcional con una compleja fragancia cítrica. Basándonos en nuestra experiencia, aconsejamos realizar el Scrogging o cualquier otro tipo de sujeción, ya que las ramas podrían no ser capaces de soportar el peso de los cogollos. En interior, para conseguir el máximo rendimiento por planta, no coloques más de 2-3 por metro cuadrado, ya que esta variedad se vuelve muy tupida. También podría beneficiarse de una defoliación más frecuente, ya que produce muchas hojas grandes y anchas en abanico, y podría necesitar ayuda con la aireación más adelante en la fase de floración. 🚀 Consigue aqui tus semillas: https://2fast4buds.com/es/seeds/lemon-mandarin 💡FC6500: Eficiencia líder en el mercado: la lámpara de cultivo LED FC-E6500, que ostenta un estatus líder en el mercado, es una solución rentable con un PPE de 2,8 µmol/J y un rendimiento máximo de 2,5 g/vatio. Ofrece un PPF alto de 2026 umol/S y es adecuada para una cobertura de vegetación de 1,50 m x 1,50 m y una cobertura de flores de 1,20 m x 1,20 m. Iluminación versátil y uniforme. https://marshydro.eu/products/mars-hydro-fc-e-6500-730w-commercial-led-grow-light/?gad_source=1&gclid=Cj0KCQjw1qO0BhDwARIsANfnkv9IIrYSbmJqz8PqpJOIyWwJfp5bc3SGJgUV68USLQ4tjmXDYwoBuAsaAue3EALw_wcB 🚥 MarsHydro ADLITE UV/IR/RED: Para lograr un crecimiento óptimo de las plantas y maximizar los rendimientos es un arte simple que depende en gran medida de las condiciones ambientales adecuadas. Reconociendo las limitaciones de la iluminación natural y las soluciones de iluminación tradicionales para satisfacer estas necesidades únicas, lanzamos ADLITE. Estas luces especiales UV, IR y roja están diseñadas para llenar áreas del espectro, proporcionando las altas longitudes de onda que las plantas necesitan para un crecimiento y desarrollo óptimos. 🚀 Consigue aqui tu Adlite: https://marshydro.eu/collections/adlite-supplemental-lights/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 📆 Semana 13: Por fin ha llegado la hora del lavabo de raíces y la próxima semana cosechando, los cogollos son tan pesados que le cuesta sostener a las ramas 😅

Here we are in week six of flower and not a lot has happen this week other than the usual watering and letting her do her thing. Only trouble this week was updating GoPro had to try a few times. Other than that we got some rain in my home town and collected about 60 gallons that I'm going to use to finish the rest of the grow. Also, got my new AC Infinity CLOUDLINE T4, Quiet Inline Duct Fan System with Temperature and Humidity Controller, 4-Inch. I was really hoping this two plants would finish before the year ended, however, it looks like they got others plans. See you guys next week.

A few sprouting for my 2nd wave of dwarfs today. Day 45 for first few (except the one slow poke whos about 2 weeks behind). All seems to be going well nice green to them. I noticed the spots just recently i think i might have put to much ph down in the flush feeding and theyre telling me ph flux?? Got a mutant who once grew 5 fingers but since flwr has been growing only 3 fingers. i read its a ruderailis trait. Shes staying super short too. My temps. are good 45% humidity with lights on now just put the dehumidifier in see if shell work for me again i got a chance to go in during darkness and rh was upto 70%.

During this week the plant has basically done its last big stretch. The hairs have started to develop and I have stopped using root boosters as stretching is slowing down , on the other hand I have added nirvana to help increase production and resine.

Día 29 (18/11) Subo a DLI 45 CBD Auto 20:1 #1 sigue sin mostrar las preflores... ¿será una auto tardía o será una fotoperiódica? Cada planta empieza a tomar su ritmo de riego personalizado, así que allá vamos: CBD Auto 20:1 #1 1000 ml CBD Auto 20:1 #2 0 ml LSD-25 Auto 750 ml OG Kush Auto 750 ml He observado que regar 1 litro de golpe provoca escorrentía (llevándose nutrientes del Super Soil), de modo que riego primero 750 ml, y a los 5-10 minutos añado 250 ml adicionales y el sustrato es capaz de absorberlo todo😁 Día 30 (19/11) CBD Auto 20:1 #1 sigue sin mostrar las preflores... Debido a que no para de crecer CBD Auto 20:1 #1, decido hacerle una buena defoliación y algo de Lollipopping. A ver como reacciona! Riego H2O RO CBD Auto 20:1 #1 750 ml CBD Auto 20:1 #2 750 ml LSD-25 Auto 500 ml OG Kush Auto 500 ml Día 31 (20/11) Por fin CBD 20:1 Auto #1 muestra las preflores (femeninas)! 😍 Parece que va a ser una Late Bloomer! OG Kush Auto están empezando a estirarse, parece que va a ser un monstruo! Riego H2O RO CBD Auto 20:1 #1 750 ml Día 32 (21/11) CBD Auto 20:1 #1 se muestra imparable en su crecimiento a pesar de la defoliación y el Lollipopping de hace dos días De modo que me decido a hacerle Supercropping! Dicen que NO se debe hacer Supercropping a las Autos, pero siempre me gusta experimentar y ver que ocurre. Come on! Un día muy divertido! 😁 Riego H2O RO CBD Auto 20:1 #1 750 ml CBD Auto 20:1 #2 500 ml LSD-25 Auto 750 ml OG Kush Auto 750 ml Día 33 (22/11) CBD Auto 20:1 #1 se ha recuperado estupendamente! No deja de crecer y estirar cada una de sus ramas! OG Kush Auto está estirándose muchísimo (4 cm / día), de modo que decido hacer LST a la cola principal para buscar una nivelación de la canopia Riego H2O RO CBD Auto 20:1 #1 750 ml CBD Auto 20:1 #2 0 ml LSD-25 Auto 0 ml OG Kush Auto 0 ml Día 34 (23/11) OG Kush Auto se ha recuperado muy bien del LST! 😍 La rama principal ya está apuntando hacia arriba y creciendo! El resto de ramas de OG Kush Auto empiezan a estirarse igualando la canopia Le aplico un ligero LST para espaciar y distribuir las ramas Riego H2O RO CBD Auto 20:1 #1 1000 ml CBD Auto 20:1 #2 750 ml LSD-25 Auto 750 ml OG Kush Auto 750 ml Día 35 (24/11) Lollipopping & Defoliation day! 😍💥💨😁 CBD Auto 20:1 #1 Lollipopping de todos los nodos y hojas quedan por debajo del plano "virtual" que marca el supercropping CBD Auto 20:1 #2 Defoliación de algunas hojas de abanico que tapan a cogollos inferiores LSD-25 Auto Defoliación de algunas hojas de abanico que tapan a cogollos inferiores & Lollipopping de una par de nodos de las 2 ramas inferiores OG Kush Auto Eliminación de las ramas del 1er nudo (eran enanas y débiles) y defoliación de algunas hojas de abanico que tapan a cogollos inferiores. Riego H2O RO CBD Auto 20:1 #1 1000 ml CBD Auto 20:1 #2 0 ml LSD-25 Auto 0 ml OG Kush Auto 0 ml 💦Nutrients by Bio Tabs - www.biotabs.nl/en/ 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en-us/products/pro-mix-hp-biofungicide-plus-mycorrhizae "GDBT420" 15% DISCOUNT code for the BIOTABS Webshop https://biotabs.nl/en/shop/

Alles gut

Very very sticky i had to change gloves every 2-3 buds!🤓 Delicious smell🤤

Hello. This is the end of week 8 and the beginning of week 9 of flowering. OK. Last look at these plants before harvest. Thought I might harvest this week till I saw the weather forecast. it was 32*c here yesterday and about the same today. It gets about 4* to 6* degrees hotter in the greenhouse and was 35*c in there when I was taking pics today. Over the next 10 days or so it will be much cooler here, so I'll start harvest on Sun. It should take me 6 to 7 days to finish , and those will be long days too. Just stopping for food, smoking and life's small emergences. OK. Keep Growing Straight. Chuck.

8/28/2022 - 21 days since my little girl sprouted from seeds🌱 The third week of vegetation of my Bruce Lemon Diesel 🍋⛽🌻 Nutrients: Jungle Indabox - I had to adjust the dosage, after the first dose of nutrients, the lower leaves of the plant lightened a bit, this was especially visible on her sister Orange Sherbet Auto, which burned the tips of the lower leaves - after this week I reduced the dose by half 🍃🍃 Hesi: Hesi Root Complex I give this root stimulator for root support, although Jungle Indabox also supports root growth, namely: Jungle Urban A - (N-P-K) - (2-1-6) Everything for healthy growth and formation of the root system Atami - ATA Calmag - I missed completely Advanced Nutrients - Bud Candy - I also adjusted the dosage by half 🍬🍬 Preflowering: Classic white hairs appeared on the stem this week, indicating the female gender 👩‍🌾👧🏼 Light: Mars Hydro TS1000 - really great lamp with sufficient lighting and energy-friendly 💡💡 Training: Topping: I usually top in the third week of the plant's life, just like this time. However, now the girls are very advanced in growth, so they will have more main branches 🌴🌴 LST: Two days after topping, I anchored the lowest branches to the ground with metal clips, tied the higher branches with a string towards the edges of the flower pot, so that the light would shine on each of them 💡💡 Defoliation: In the next two days, I cut off all the large leaves that were shading the branches 🌞🌞 The girl is no longer a child, she is a strong young lady, full of branches and leaves. Its color has also changed, it is now deep green again. The stem is rough, so I assume a strong root system 🌲🌴🌾 Thanks for the likes and you can follow me on Twitter 🐦: @ Targona666 See you soon 😍

Ultimi giorni per una pianta mentre altre due sono a seccare. Qua foto e video delle prime tre piante tolte. A settimana prossima 😊

Two low branch broke off due to wind and stem wasnt stong enough for weight of the buds....other than that just a handful or two of defoliation every two day or so....makes trimming ez lol

Not much to report this week she is getting more frosty buds and smelling so dam good right now it's crazy that fresh bowl of berries smell I love it .. she can't be beat that smell and her deep black on the leaves a very tasty looking girls .can't wait to see her plump ii over the weeks now ..cheers canna family .

Week 5 - 08/27 Seedsman - Critical + 2.0 Blimburn - Apple Fritter All running smoothly, Introduced the exhale C02 bag last week thus far no issues or signs of deficiencies. Light defo - Heavy feed to start the week (Nutes) *Mid-Week Update* Week 1 -Early Flower* 08/30 Both have grown significantly since last update, Flowering has begun. Introduced Raw NPK (Potash/Phosphorus) *End of week recap* 09/02 39-40 inches in height Week 1 of flower went smoothly Introduced Raw NPK Phosphorus and Potassium

Hello Diary. It ended the second week of flowering on my little Farm. Sherbet Queen has become the lowest plant on the Farm. Both of her roommates, Mimosa, outgrew her. But honestly, Sherbet Queen looks the most beautiful of all three plants. The plant has received its final form and now it remains to develop flowers that are already covered with trichomes which gives them the snowy appearance. The branches are not elongated as in Mimosas so the flowers nicely cover the branches, especially the main cola. We’ll see how the flowers continue to form and fill in, but for now, all is well, this time I don’t have any problems on the farm. Watering is now every two days, I added CalMg preventively twice and added one Easy Bloom Booster tablet. Conditions at the "Farm" are not ideal, the temperature is around 29 degrees which is expected given the summer months. Here’s what it looked like last week. 14/06/2021 - Day 30. Watering. I always prepare about 8 liters of water, I regulated p.H. at 6.5, added 1.5 ml / lit CalMg and one Easy Bloom Booster tablet. With that, I watered all three plants evenly. Temp / Humidity on the farm - 27.6 degrees and 40% humidity. 16/06/2021 - Day 32. Watering. I lowered the p.H to 6.2 and added 1.5 ml / lit CalMg. Temp / Humidity on the farm - 29 degrees and 50% humidity. 18/06/2021 - Day 34. Watering. This time I didn't add any extras, I just lowered the p.H to 6.4. Temp / Humidity on the farm - 29 degrees and 50% humidity. 19/06/2021 - Day 35. Photography and height measurement. Sherbet Queen Auto - 88 cm That’s all for this week, see you soon.

16.09.2024 / Honey Cream Indoor They where Watered with 500ml each every 3-4 days. They are growing good and looking healthy