The Grow Awards 2025 🏆
Recommended
Likes
Comments
Share
@WorldPeas
Follow
Harvest was rushed due to unforeseen events. No matter though. Gave her a very rough wet trim and hung each branch from my scrog net. Drying process was also rushed and my A/C failed just before the finish line so they are a bit dry and not AS flavourful as it could have been. They have been curing for 2 weeks - 3days. Still better than anything I can buy within a 300km radius and overall one of the best bowls I've smoked in years. Important Lessons: - Accurately monitor PH/TDS/EC. - Smaller pot size (?) - Feed way less nutrients (especially for autoflowers) - More reliable and cost-effective way of adjusting Temp/RH
Likes
4
Share
@iamdiddy
Follow
i cant remowe weeek 3 is wrong ,veg beggins ,tanks ... @Coast grower...
Processing
Likes
23
Share
@GrowGuy97
Follow
Transplanted to bigger pots this week seems to be going well
Likes
4
Share
@RdSkM
Follow
¿Qué opináis, eh?... Otra más de mi colección que se va a proceso de corte y secado (luego de manicurar, claro).
Likes
8
Share
Start of week 5. Week 4 went well, bud site development is going great, she's gaining size and packing on the weight! She's the least sticky of the four plants I'm growing and her smell is the mildest too. Still, she's a happy looking girl.
Likes
3
Share
I know she’s small but I learned a lot... please feel free to leave comments on how she looks regardless
Likes
4
Share
Start of week 5. Week 4 went well, bud site development is going great, she's gaining size and weight, the smell is like fresh greenery, almost like walking in the spring forest.
Likes
34
Share
Start of week 5. Week 4 went well, bud site development is going great, she's gaining size and weight. She's growing very densely, I've trimmed many inner leaves and small branches, she's the stickiest of all 4 plants I'm currently growing and her smell is strong and dank!
Likes
4
Share
Processing
Likes
6
Share
@Moss420
Follow
END OF WEEK 4 FLOWER Seems to be going well, nice to be able to sit back and watch these girls grow :D Had some bleaching on a few of the nugs, so I dimmed the light slightly and managed to raise it an extra 5cm. I also bent a few of the taller stems out from directly underneath. Big Mumma is killing it, some real nice and dense little nugs on her.
Processing
Likes
Comments
Share
Processing
Likes
Comments
Share
Likes
2
Share
Just picked this little lady up from Dr. Greenthumbs in DTLA. It's a Magic Melon Auto started by Dark Heart Nursery on 2-28-20. Current set up: - Vivosun grow tent (36x20x62) - Mars Hydro TS 1000W LED - Vivosun 4in Inline Fan & 4in Carbon Filter - Oscilating Fan 4in This week's training: LST Tie Down - Tied down the top to be at the level of the next node to channel the auxins to the lower nodes and start widening the canopy
Likes
2
Share
Just picked this little lady up from Dr. Greenthumbs in DTLA. It's a Magic Melon Auto started by Dark Heart Nursery on 2-28-20. Current set up: - Vivosun grow tent (36x20x62) - Mars Hydro TS 1000W LED - Vivosun 4in Inline Fan & 4in Carbon Filter - Oscilating Fan 4in This week's training: LST Tie Down - Tied down the top to be at the level of the next node to channel the auxins to the lower nodes and start widening the canopy
Processing
Likes
21
Share
This week I Realised I'd used the wrong feed chart so I was over feeding 🙄 the leaves burnt on a few plants so I've only fed them water this week and will resume feeding from next week. There are still no pre sex pistils showing but it can't be far off now. As soon as pistils start to show I'll start feeding bloom feed. I've turned the light up to 30000lux using HLG's online calculator for converting a lux meter/app reading to PAR , my light is 3000k which with lm301H Led's works out @ 465ppfd which is about the max the plants can use in veg without supliments co2. Here's the link for anyone using quantum boards, it has different spectrum calculators. It's been really useful setting my light up so big thank you to HLG (even though I have a Geeklight) and a thank you to the GML show on YouTube for bringing it to growers attention (I love that weekly show, so much info and perspective) https://horticulturelightinggroup.com/blogs/calculators/converting-lux-to-ppfd Hope everyone's staying safe and growing 😎
Processing
Likes
21
Share
This week I Realised I'd used the wrong feed chart so I was over feeding 🙄 the leaves burnt on a few plants so I've only fed them water this week and will resume feeding from next week. There are still no pre sex pistils showing but it can't be far off now. As soon as pistils start to show I'll start feeding bloom feed. I've turned the light up to 30000lux using HLG's online calculator for converting a lux meter/app reading to PAR , my light is 3000k which with lm301H Led's works out @ 465ppfd which is about the max the plants can use in veg without supliments co2. Here's the link for anyone using quantum boards, it has different spectrum calculators. It's been really useful setting my light up so big thank you to HLG (even though I have a Geeklight) and a thank you to the GML show on YouTube for bringing it to growers attention (I love that weekly show, so much info and perspective) https://horticulturelightinggroup.com/blogs/calculators/converting-lux-to-ppfd Hope everyone's staying safe and growing 😎
Processing
Likes
21
Share
This week I Realised I'd used the wrong feed chart so I was over feeding 🙄 the leaves burnt on a few plants so I've only fed them water this week and will resume feeding from next week. There are still no pre sex pistils showing but it can't be far off now. As soon as pistils start to show I'll start feeding bloom feed. I've turned the light up to 30000lux using HLG's online calculator for converting a lux meter/app reading to PAR , my light is 3000k which with lm301H Led's works out @ 465ppfd which is about the max the plants can use in veg without supliments co2. Here's the link for anyone using quantum boards, it has different spectrum calculators. It's been really useful setting my light up so big thank you to HLG (even though I have a Geeklight) and a thank you to the GML show on YouTube for bringing it to growers attention (I love that weekly show, so much info and perspective) https://horticulturelightinggroup.com/blogs/calculators/converting-lux-to-ppfd Hope everyone's staying safe and growing 😎
Processing
Likes
21
Share
This week I Realised I'd used the wrong feed chart so I was over feeding 🙄 the leaves burnt on a few plants so I've only fed them water this week and will resume feeding from next week. There are still no pre sex pistils showing but it can't be far off now. As soon as pistils start to show I'll start feeding bloom feed. I've turned the light up to 30000lux using HLG's online calculator for converting a lux meter/app reading to PAR , my light is 3000k which with lm301H Led's works out @ 465ppfd which is about the max the plants can use in veg without supliments co2. Here's the link for anyone using quantum boards, it has different spectrum calculators. It's been really useful setting my light up so big thank you to HLG (even though I have a Geeklight) and a thank you to the GML show on YouTube for bringing it to growers attention (I love that weekly show, so much info and perspective) https://horticulturelightinggroup.com/blogs/calculators/converting-lux-to-ppfd Hope everyone's staying safe and growing 😎
Likes
100
Share
Hi everyone :-) . This week the Orange Sherbert, Blue Gelato # 41 and Sour Diesel were harvested 😍. The Her Majesty F1 was in the darkroom and stays there for 48 hours before it is harvested. The gelato will be placed in the darkroom in the next few days. As soon as the gelato has been dried for about 14 days, and comes into the glass for fermentation, I will put all the harvest pictures of all plants in it 👍😎. Happy new week to everyone neue Let it grow 👍🌱
Processing
Likes
21
Share
This week I Realised I'd used the wrong feed chart so I was over feeding 🙄 the leaves burnt on a few plants so I've only fed them water this week and will resume feeding from next week. There are still no pre sex pistils showing but it can't be far off now. As soon as pistils start to show I'll start feeding bloom feed. I've turned the light up to 30000lux using HLG's online calculator for converting a lux meter/app reading to PAR , my light is 3000k which with lm301H Led's works out @ 465ppfd which is about the max the plants can use in veg without supliments co2. Here's the link for anyone using quantum boards, it has different spectrum calculators. It's been really useful setting my light up so big thank you to HLG (even though I have a Geeklight) and a thank you to the GML show on YouTube for bringing it to growers attention (I love that weekly show, so much info and perspective) https://horticulturelightinggroup.com/blogs/calculators/converting-lux-to-ppfd Hope everyone's staying safe and growing 😎
Processing
Likes
21
Share
This week I Realised I'd used the wrong feed chart so I was over feeding 🙄 the leaves burnt on a few plants so I've only fed them water this week and will resume feeding from next week. There are still no pre sex pistils showing but it can't be far off now. As soon as pistils start to show I'll start feeding bloom feed. I've turned the light up to 30000lux using HLG's online calculator for converting a lux meter/app reading to PAR , my light is 3000k which with lm301H Led's works out @ 465ppfd which is about the max the plants can use in veg without supliments co2. Here's the link for anyone using quantum boards, it has different spectrum calculators. It's been really useful setting my light up so big thank you to HLG (even though I have a Geeklight) and a thank you to the GML show on YouTube for bringing it to growers attention (I love that weekly show, so much info and perspective) https://horticulturelightinggroup.com/blogs/calculators/converting-lux-to-ppfd Hope everyone's staying safe and growing 😎