The Grow Awards 2026 🏆
Likes
Comments
Share
@Grilla
Follow
-I’m going to check tomorrow, March 2, to see if the seeds have popped. I’ll take pictures then. -It’s March 6th and the seedlings are looking happy. I’m hand watering them with filtered water. I’ll make a tea and start adding some benies the next time I water them, hopefully. I want to add my go pro and stream live.
Likes
15
Share
(12/18-12/24) Days 15 to 21 Hope everyone enjoys the pictures. I will try to add a video and black back or cover pics by end of week every week. Week 1 Notes & Observations: Plant 1 and 2 have been showing nice steady growth. Both seem to have similar phenos so far, so Im looking forward to a nice straightforward grow and training with minimal variants. They will be kept in these containers until week 4+ 12/24 - fed both plants 4 cups purified water. I added 100ppm of veg mix concentrate (recipe above) added .25ml of CaliMagic (General Hydroponics 1-0-0). PH balanced water to of 6.55ph. I got about 2 cups of runoff from each plant and it was 6.25ph. I will be topping next week. I also topped the first set down to the 3rd node on each plant.
Likes
10
Share
@Fonzo412
Follow
This will be the start of week #2 of seedling stage. Had an issue 😢 with my blue dream plant I believe I’ve might of over watered . It looks bad hopefully it can recover. Yield may be stunted really lagging behind. Also I have another blue dream seed so I’m thinking of starting that one fresh so I can pot into the finale medium. I didn’t want to use the cup but didn’t have enough soil at the time 🤷‍♂️ The strawberry 🍓 banana 🍌 auto and the power plant fem seems to be doing good 👍 so far. All in all I’m happy 😊 with how things have been going throughout my grow . I’ll will be feeding my plants nutrients and dropping the lights 💡 for the start of Veg next week. Let’s goooo… 😎😏
Likes
5
Share
@gerrypom
Follow
i bought 2 seeds with the same method, one is now growing the other one have to still open...
Likes
3
Share
Esplosioni di cime e terpeni manca sempre meno alla fine. Concimi e nutrienti usati 25 g di guaino di pipistrello 16 ml di adv nutriens 25 g di pellet a rilascio lento rqs
Likes
21
Share
@Siriuz
Follow
Alright guys so here's to last week My first time doing sweet seeds And I must say it was really awesome Yo, I ran my first Cream Mandarine XL from sweet seed and at the very beginning thought she was going to die, she was sad and having it rough but with lots of caring she came back to life and even better, this is also one of the longest autos and the tallest I've had with many colas, Im still learning so I should probably train them better in the long run once I get to run another one, well if you look into my profile at my grow diary I'm running gorilla XL right now and I'm training her little by little, more precisely I'm making sure she's getting plenty of light so we don't waste any single spot of energy once she's got to bloom!! But hey we keep talking bout cream Mandarine XL and it's sad to say goodbye but it's also her time, she's got to the point of no return and we've got to take her out Thanks a lot for everything pretty girl You rock and I love sweet seeds Thanks a lot for those good good smokes Sweet smokes to all of you running them genetics also thanks a lot to the whole community who supported me in the whole process I do appreciate it Also thanks again sweet seeds Apollo for your support letting me run your genetics and given the opportunity to show the world my farming level Hopefully with the great people around I will become better :') Alright now time to harvest this girl Peace and love brothers If you got any questions just shoot
Likes
10
Share
@BlaKX
Follow
Ai Gude Growmies, Habe sie vor über 1 Woche in einen 0,5l Topf mit Canna Terra Professional Plus Erde. A und B wachse zusammen auf im Gewächshaus. Leider habe ich beim Samen schalen entfernen etwas fest gezogen und damit einen kleinen Wachstums stop bekommen habe. Die trockene wiederverwendete Erde muss ich leicht mit Dünger angießen bzw es ist ein test. Ansonsten herrschen brutal heiße Temperaturen aber sie verkraftet es super.
Likes
96
Share
💩Alrighty then Growmies We Are Back At it 💩 Well folks we just finished up the last run and so we are bad to do it all over again 😁 So what do you say we have some fun 👈 We got some Z & Z 🚗 🚘 🚗 🚘 👉 From Exotic Seeds I just had to try this one again and see if the last seed would germinate and she popped 👌 Seed soaked for 24 then placed in a tub with paper towels , once it cracked and rooted , placed into its main pot 👌 FC4800 from MarsHydro Lights being readjusted and chart updated .........👍 www.marshydro.ca 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14 NutriNPK Grow 28-14-14 NutriNPK Bloom 8-20-30 NutriNPK Bloom Booster 0-52-34 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈
Likes
Comments
Share
@DrGrow420
Follow
The plants have grown very fast this week, easily doubling in size. I moved them closer to the light to 90 cm from 110cm. Watering as needed and I am keeping the soil surface moist with light watering twice a day. I have fed the plants twice this week. First with a half dosage humic + fulvic acids, microbial inoculant and Seagro. The second feeding was half dose Seagrow and Biobizz BioGrow with some CalMag and Silicon. I am preparing a compost tea with some added kelp meal, insect frass and worm castings for the next feeding before I start LST.
Likes
10
Share
Day23: Upgraded my box with a Humidifier and humidity meter. Still figuring out how much power should I put it on to maintain good humidity level. Overall health looks good. After some days I'll spread out it a little using LST to get more light coverage. Day24: Removed some old leaves that were mostly in shade or shading other newer leaf. Continuing LST, getting into shape. Trying to be careful with the damaged stem. Day25: All good, some more twisting. As I see, I could manage to plant in one end of the pot and grow it to other. Now its time for vertical grow and a little bit spread-out for the sides. Looking Healthy. Weather: Heavy Fog before night time Day28 More LST and full area is covered now. time to get some height
Processing
Likes
4
Share
Começamos a 3° semana no domingo está agora com 18 dias a correr bem, vou dar continuidade ao lst ate à 5 ou 6 semana e mudar o ciclo pra floração As mais pequenas no vídeo uma tem agora 12 dias e a outra está com 15 no fim da segunda semana começou hj o lst
Likes
51
Share
@Waveform
Follow
Already week 7, and it’s starting with much better air humidity which makes it easier for me to stay in the recommended VPD range – currently 54% at 25 °C at canopy height. With 58, 67, 78 and 80 cm plants’ average height is about 71 cm. Odour has increased, and sometimes, but only shortly, I get the feeling the coal before the blowers cannot eliminate all of it. While the smell was a bit strange sometimes one and a half week ago, it’s now absolutely yummy, sweet and promising. As is all the sticky stuff adhering to my folding rule when I measure their size. I am a bit confused about the amount of yellowing leaves. That would indicate a nutrition deficit. On the other hand, last feeding (yesterday it was only calmagged water) brought some brown edges to their tips as I wrote. Which could indicate a slight over-nutrition. I am not *that* worried as leaves around the buds all look great (except for mentioned, but not youngest tips), and mature plants obviously tend to concentrate on bud production solely. But week 7 is quite early, or isn’t it? Any recommendations? Maybe I should go with organic fertiliser next time to avoid being stuck between two options ;) As they had run dry already, I gave each one another round of drink. Slightly less fertilised than last week. And I removed the lowest yellow branches and tiny buds that would not make it into the light in time. The Pineapples must have some mimosa genes crossed in. Each time I touch them they bow away their heads in deep dislike. The taller one looks like her head would be too heavy now … It is not, and usually they recover after an hour or so. The Sherbets are pretty unimpressed by all I do. Meanwhile I’ve been working on the Raspberry Pi BoxControl that should help me stay in better VPD ranges in the future. I am not sure how to translate this all into a more stable solution than based on a breadboard, but the state so far (and how it is supposed to work): Raspi runs headless with control software on autostart. Every minute temperature and humidity are received from a GY-21 I2C chip that should be hanging around plant tops. Data is saved in a database, VPD is calculated and signalled in form of a RGB LED color. Additionally, LCD display rotates through current stats. 3 relay modules can en- or disable misting, dehydration or an additional blower. Maybe I can add a CO2 sensor just for the fun of it (but I’d have to develop a device protocol myself), maybe even one or two soil moisture sensors. Theoretically you could also have a lighting control, but then, GPIO ports are all used. The display needs a lot of them, and while I can log onto the Raspi on my local network and view its desktop, I’d prefer to have a quick overview at place. I am not really informed about current models. Are some GPIO extensions or Raspis with extended GPIOs on the market? But so far, that’s all theory. I never had a PCB developed for my hobbyist projects, I am not the best with a solder station. Never had a Raspi run 24/7 for a really long time. Did a bit more lollipop ping in the evening. Especially tallest Shepard had fun building some more very low buds and branches. I think it can investigate its powers better on different places. Day 51: It’s getting hard to measure soil humidity with my low tech device. Soil must be full with roots and I don’t want to hurt them much. I can see them at the outlets of their pots too, sometimes a bit dry of course as these parts run dry earliest. Experiments to include the CO2 sensor in my test setup failed. I can read and reset it, but setting measurement mode and reading values don’t work. Maybe because my I2C library cannot use ClockStretchLimit. Running out of GPIO ports anyway and seeing that the soil sensors are analogue devices, I’ll probably revive my Uno too and have discovered some clever Raspi heads that should make a more stable setup (and some cooling) possible while also adding a handful of PWM ports and an integrated display. I’d like to include a camera module too and it would be great to have some ports available. A final setup would obviously include a Raspi 4 or 5 to easily enable secure online access. But so far, all working nicely in test setup. Day 54: Sometimes I wonder if they’re still growing at all, but then it’s good to have the daily pictures to compare bud width which now seems to be the main interest of the ladies, although differences are now clearer to tell between two day intervals. The taller ones look like they are one week ahead of the smaller plants, with even higher fan leaves turning pale now. Which at an estimated seed–harvest time of 8–11 weeks for both strains should be pretty common, I guess. Or am I wrong? Summerly temperatures make the temperatures at canopy level sometimes reach 31 °C, but at least the simple ultrasonic diffusers arrived and I am getting closer to a better environment control. I can at least switch the diffuser inside the tent remotely from my phone, and a deep bowl of water with a lid so the "fountain" produced will not wet the tent floor and one of the fans placed at the bottom now to lift its mist upwards seems to do the trick. Humidity increases while temperature drops, getting the plants into a better VPD level, so all I have to do is wait for the evil A to deliver the necessary Raspi components to have this automated, maybe still while this grow runs. At the end of this week, there was just a bit of height gain for the two smaller ladies who now approach their next 10 cm mark. Overall, I get the feeling it won’t be that long until harvest. Maybe with the taller ones a week earlier than the others. There’s really not that much bud growth anymore, rather refinements – like buds getting more nodes and color. I’ll investigate the trichomes every few days but would welcome your estimation.
Likes
6
Share
Today will marked 7 weeks in flower. I believe I am going to take these girls up to 10 weeks due to being out of town for the weekend probably will flush them out for 1 week only before chopping them down.
Likes
5
Share
Bonjour à tous, les titinnes poussent bien,ça leur fait 5 jours de germination. Je suis satisfait de mon composte fait maison, j'ai fait tout mes mélange ( composte + zeolithe + guano diff et pour finir terreau zéro mix). Je vous à très vite, salut à tous 😉😊
Processing
Likes
42
Share
Blasted a small amount just to see ...💎 Started to chop at 8 weeks I'm on plant 9 of 19.... 🍊🍊🍊🍊🍊🍊🍊🍊🍊 😈
Likes
11
Share
@Ecogeek
Follow
Lost of changes these last few weeks in addition to changing the light position and duration I back off the feeding and giving both jst purified water. Did a flush today since their looking close to home plate. Had to do a heavy defoliation with some of the leaves on both plants. It looked like some mold developed but after cleaning the tent and letting the girls get bone dry to avoid it’s return everything is a go! It’s been a exciting and knowledgeable grow