Likes
Comments
Share
I'm behind schedule with my updates, sorry I've been busy... Things have moved along significantly for this girl since last posted. Topping did her some good despite the fan falling on the plant and snapping of one of the main sites. I intend to grow her out during the flowering stage of the 3 others autoflowers and then have her in flowing by herself on the 12/12 schedule in the 3x3 tent. Hopefully she'll be a monster ;) UPDATE *** Testing something out. She is in the midst of ending week 5 and I've transplanted her into a 40L pot to see if this will benefit stronger cola formations and an overall bigger yield. I was given these seeds and had believed they were feminized seeds but I'm starting to see pistils at bud sites. Must also be an auto this will alter my plans for this girl but he will be the last of the 4 auto flowers I have going therefore she will get all the light attention in her final 2-3 weeks.
Likes
24
Share
Powdery mildew is being kept at bay from the sun's rays hopefully she stays OK till harvest time. The main cola is getting big and heavy and she is stinking the place up 😊..
Likes
15
Share
They are so different 🤭 And beautiful 😍 Second week of flowering 👩‍🌾🏻🌱
Likes
5
Share
Defoliating more often than expected, plants just fill in the canopy so quick this run. Slurricane didn’t stretch much and stayed on the shorter side overall so I elevated them with a riser underneath the middle two pots. Royal Jelly and PKBR easily doubled in height during stretch bringing them to a little over 3 ft. Heavy water need during the stretch for those two so I made sure to avoid overwatering the Slurricanes which were gentler sippers. All phenos were successfully cloned (my first attempt at cloning). Kept them in the humidity dome sitting longer than I would’ve liked before up-potting but I realized most of my clones were cut too long and were getting strangled from growing by the dome. In the future, ill take my cuts shorter and be ready to up-pot after about 2 weeks
Processing
Likes
9
Share
@Kushizlez
Follow
Everything coming along nicely. I’ve discontinued all nutes but will give one more little top dressing to the cheese plant tomorrow then that’s it. Just straight stabilized RO water from here out. The slurricane is just packing on PM like crazy. The cheese has actually stopped the spread for the most part. At harvest I’m going to wash the shit out of the slurricane and cheese with some warm RO water and some h202 to get the majority of it dissolved. Other than that the quality of the slurricane is beyond ridiculous. It’s by far the stickiest strain to the touch in the tent. It’s probably winning for smell too. It’s straight gassy licorice pine. The pm susceptibility is a deal breaking drawback though. The cheese is looking good and smells great. It almost smells like rotten milk. Some of the nugs are really filling out into these nice long chunky little things. The pistils are turning a light orange/pink color too. Unfortunately it’s not maturing at the same rate and will make everything in the tent go for another 1.5-2 weeks. Garlics are looking better. The lanky pheno has filled out quite a bit more than expected and is super frosty with a great smell. It’s finally starting to purple up a bit. I think it will still be quite leafy around harvest but time will tell. Pheno 2 has better structure and density but lacks frost, smell and color. Not very impressed by it honestly. The zkittlez is looking great and getting super frosty. Especially around the crowns of the top colas. Lowers look like shit though. Despite being somewhat leafy, the main branches look quite dense. It’s probably the shortest and bushiest plant in the garden. It’s yellowing out quite a bit now and will probably finish with the blackberries and slurricane. The blackberries look amazing and smell even better. One of the phenos is a crazy producer and creates massive buds with musky berry terps. The other pheno is a beautiful purple strain that produces a crazy amount of frost and chunky golf ball nugs at the expense of large yield. It’s smell is very sweet and candy like and has been a very low feeding and maintenance plant. Slurricane #4 looks great aside from its infection. It definitely wins for resin content and smell but looks like a low yielder.
Processing
Likes
25
Share
***** Week 10 growth - February 6 to 12, 2021 - Week 1 Flower ***** Here we go.......on to flower now. Last week was transition week and bud sites are setting on the girls now. Lights flipped a week ago to 12/12.......typical flower. Stretch is starting this week now. Last week was marginal height growth. Nutrients switched over to flower schedule and following week 1 again this week. Next week will move up the ppm more and start on bud enhancers. More microbes and sweetener this week. Silica ppm also increasing now as not looking to bend branches much more now. Have a hole in the canopy that I am just going to need to live with. GSCHB and MM2 did not growth as expected. They are not reaching up as tall as the others and stretch is slow. Not looking like they will catch up in next couple of days☹️☹️☹️ Little more detail....... Feb 6/21 - Day 1 - been drying for 2 days now so water day with some supplements - 3L each girl with CalMag @ 2ml, AN B52 @ 1.5ml (using up an old bottle to finish), Enzymes @ 1ml - 575ppm and 5.9pH - Need to start increasing silica. Using up some B52 which has some silica in it.......and other vitamins so its all good😀 Feb 7/21 - Day 2 - Leaves up today and praying nicely. - CL1 is going to sleep earlier than the other girls and is droopy early in the evening.......root issues or too much light?? - CL2 is looking very good. Leaves are cupping nicely and buds forming nicely. - dry out day - stretch is going now and the girls are growing hard Feb 8/21 - Day 3 - Feed day again, going to stay with week 1 flower nutrients, same as last week. - IPP Grow @ 1ml, Micro @ 2ml, Bloom @ 2ml, Black Storm @ 3ml, Sea Storm @ 5ml, B+ @ 0.5ml, Red Sun @ 0.5gr, Carbs @ 1ml, Natures Candy @ 1ml, Piranha @ 1ml, Microbes @ 2ml. - 4L for each girl.......yeah, took a little longer to mix up this feed😀 - 1350ppm and 5.9pH - no run off from the girls today......little light on the water, they should have had 5L each. - last feed with bud starter, Red Sun, next will be Bud Fusion for bud booster next week. Feb 9/21 - Day 4 - no run off yesterday so adding more water today......plain tap water.....no additives - 5L for each girl. 225ppm and 6.0pH - good run off today. - CL2 is really looking good.......beautiful leaf colour and nice amount of stretch right now. Feb 10/21 - Day 5 - Nothing today......watered two days in a row - ready for more silica!! Branches need to firm up. Feb 11/21 - Day 6 - Recharge arrived today!!!!!! Time for more microbes and sweetener😀💪 - purple stripes on main stems so adding more magnesium through Epsom salts - 4L mixture for the girls with Epsom Salts @ 0.5Tbsp, Silica @ 1.5ml, IPP Carbs @ 1ml, Recharge @ 1 tsp - 1,000ppm and 5.9pH - different microbes now and excited! Feb 12/21 - Day 7 - Nothing again today.......give them watering tomorrow morning. - Wondering if their leaves are a little dark........consider bring down ppm next week.......it was hard this week at 1300ppm........water is 250 on its own so around 1100ppm nutes added. Looking good ETS......different phenos coming out a little different but it’s week 1 flower😃
Likes
6
Share
@Prof_Weed
Follow
Removed 2 leaves. Has got a little bit of deficencies, i think the pot is to small, not easy to feed.. But Overall happy!
Likes
199
Share
Not bad not bad, by the looks of it she'll be a fatty but i just hope that she'll be ready at the same time as the others. What i want to know is how the bbc can predict when i want my harvest but can't predict when my fucking landlady will break in and faff about it my grow room, long story short 46 makes me 👺 anyways, boucing back from a scare nevermind mind her 46 is my focus lol oh my the things we do... enjoy ! 🚀 Induced resin production by dropping the lightschedule to 10/14 almost immediate effects were smelt, loud and clear : candy shop goodness ! this one is gonna be a sweet one ! 👊
Processing
Likes
2
Share
im not gonna say anything until she can suport herself,otherwise progress with #wedcake 2.0 is doing well..progressful week looking foward to the weeks ahead..otherwise evrything is growing well..💀
Processing
Likes
6
Share
@Heybuddy
Follow
Super proud of the way the manifold is turning out. So symmetrical! Between now and the next update I’ll be doing some defoliating. Get rid of some of the lower fans, create some airflow up top, and possibly remove the lowest set of growth tips on each of my main stems. Plant is flourishing and healthy but those leaves could maybe be more vibrant. Might be time to start introducing nutes to the reservoir. Edit: Added a video of the plant after defoliating. Ended up removing the bottom 2 nodes of growth except for the outer fan leaf on the top one. Also moved the soft ties up one node and adjusted where they’re anchored so they pull the stems apart more. Can’t wait to see what she looks like in a week!
Likes
19
Share
Trimmed a bit more & added a few more LST clips on day 74, watered with just Pro-TeKt to get the PPMs down still high at 2567 average, I may do so again next time, I suspect this coming week to be the final veg & will be flipping at the end of it.
Likes
23
Share
Hey growmies! 👊 Welcome to week nine for Temperance this Tropicanna Poison XL Auto by Sweet Seeds. Please check out the sister diaries: Sweet Zensation XL Auto & Orange Apricot Glue XL Auto Massive thanks to Sweet Seeds for sponsoring this grow! Daily Updates: ### Week 9 Day 2 17:00 29/8 Photographed ### Week 9 Day 3 06:00 30/8 Fertigated 3l ### Week 9 Day 7 03:00 3/9 Photographed and fertigated 3l Well Temperance is really starting to progress in flowering now, these buds are absolutely stunning, I am really excited to watch them develop. Purple pheno is really quite amazing to me and a first as a grower. --- ========== Tent: 120cm x 120cm x 180cm Light: 600w HID Elite Dual Spectrum HPS + Angel Wing Reflector Air: 5" duct fan system with carbon filter ~300 m3/hour + RAM 9" floor fan + 4" intake fan Pots: Air Pruner Fabric Pots 30l - UGro XL Coco + horticultural grade perlite (~20%) Seeds supplied by Sweet Seeds https://sweetseeds.es Nutrients supplied by Shogun Fertilisers https://www.shogunfertilisers.com ==========
Likes
11
Share
It’s bern roughly two months these guys have been growing! Lst’d Both but untied the gg because I wasn’t sure she was benefiting from it so I’m going to do it over. These ladies (I hope) will start their flower journey next week when I revive my new flower tent 😎..stay tuned for some epic buds..I hope!!
Likes
1
Share
@AsNoriu
Follow
Day 78. Humidity keeps very high, all fans on max, extraction exhaust is on 70%. Day 83. Found maybe WPM on one plant, so now all air movement on max of all maxes ;)))) Happy Growing !!!
Likes
39
Share
@NuttyYeti
Follow
Well it might not be the prettiest plant but the buds are getting really frosty so I'm excited to see how she turns out! Edit: added a new video because I was missing my girl in the night. She's a frosty lady and smells great! Lol
Likes
22
Share
@Slobasian
Follow
You walk into the back yard and it’s a straight face punch of smells. Looking like some indoor rn moved all plants to safer place in case storm hits so now I atleast have a wind break