I I’m filling a 100l water butt with 250ml each of dutchpro A and B and 150ml of explode in the same brand also used 30ml of rootexcelarator by house an garden and 15ml of x-force by bio green also 5ml of canna version of calmag!

Week 17 (19-5 to 25-5) 19-5 Temps: 19.8 to 25.3 degrees Humidity: 45% to 57% Watering #1: 1000 ml. EC: 1.6 Lamp strength set from 70% to 75% 20-5 Temps: 20.1 to 25.4 degrees Humidity: 46% to 55% Watering: Both 1000 ml. EC: 0.5 21-5 Temps: 19.9 to 24.3 degrees Humidity: 45% to 56% 22-5 Temps: 18.2 to 23.9 degrees Humidity: 43% to 52% Watering: Both 1000 ml. EC: 0.5 23-5 Temps: 18.2 to 23.9 degrees Humidity: 47% to 56% Watering: Both 1000 ml. EC: 1.6 24-5 Temps: 18.7 to 25.4 degrees Humidity: 50% to 54% Watering #1: 1000 ml. EC: 0.5 25-5 Temps: 19.4 to 25.8 degrees Humidity: 50% to 61% Watering #2: 1000 ml. EC: 0.5

📆 Semana 3 El estiramiento alcanza uno de sus puntos más intensos y las plantas muestran un desarrollo sobresaliente, ganando altura y volumen de forma constante durante toda la semana. La estructura se ha abierto de manera uniforme, permitiendo que las ramas secundarias alcancen niveles similares a las puntas principales y formando una canopia bien distribuida y eficiente. Los sitios florales comienzan a multiplicarse por toda la planta y los primeros grupos de pistilos se hacen claramente visibles. El elevado ritmo de crecimiento viene acompañado de un notable aumento en el consumo de agua y nutrientes, reflejando un sistema radicular activo y una excelente capacidad de absorción. Las plantas mantienen un aspecto vigoroso y saludable, respondiendo muy bien a las condiciones de cultivo. ⚡ EC: 1.6 - 1.7 💧 pH: 6.2 - 6.5 🌡️ Agua: 21°C 🌫️ Humedad: 45–50% 💡 Intensidad: 950–1050 PPFD 🔥 Nota de cultivo: La tercera semana suele marcar la transición entre el crecimiento explosivo y el inicio de la formación real de los cogollos. Una estructura bien desarrollada durante el stretch permitirá aprovechar mejor la luz disponible y sostener una floración abundante durante las próximas semanas. Seguimos creciendo fuerte 💪!

Venga familia que acabamos la quinta semana de estás Gelato Olandese de Dutchfem. Entramos en la recta final esta próxima semana aplicamos el PK de Agrobeta, ExplotaCogollos. Iremos viendo el proceso de engorde de las flores. Se ve que tienen un buen color están bien sanas, se ve que progresan adecuadamente. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Las maximas de temperatura no superan los 26 grados y las mínimas no bajan 20, así que no me puedo quejar. Los niveles de humedad también son los correctos van entre 50%/65% de humedad relativa. Por supuesto el Ph lo estamos dejando alrededor de 6. Hasta aquí es todo, buenos humos 💨💨💨.

All the photos are in the 8x8 now. just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Day 65 Day 15 Flower 06/07/24 Saturday Water de-chlorinated tap pH 6.2 today. I have had to do a deep defoliation, and light LST, she just climbed last week 🤦‍♂️😅 and air flow was becoming a problem finding wet spots under leaves is no go at this stage in flower . So here is her update, she is absolutely huge 🤩 thank you SSSC for allowing me this run, I'm going to dedicate my whole space to a full auto run for her next. She has un tapped potential 👌. Updated pictures and a video today. Day 66 Day 16 Flower 07/07/24 Sunday no water/feed today letting her dry off a little more. Updated with a short video 🤩 Single plant monster ✌️💚 Day 68 Day 18 Flower 09/07/24 Tuesday She seems happy and dark green so just a water today, 3L. Updated a short video 😁 Day 69 Day 19 Flower 10/07/24 Wednesday Big feed today, de-chlorinated tap water pH 6.0 5L feed. Run off 5-10%.

Hello everyone. Another week has come to an end, and for two weeks, we have been watering our girl with plain water pH 6.2 TDS 120 ppm. I think next week we will finish our journey. I want to experiment - 2-3 days without light and with reduced temperature. Share your opinion on my experiment.

30 days old and already showing signs of flowering. LST and FF feeding schedule.

Plants seem to have responded well to the flushing between week 14-15. They were flushed for seven days with nothing but neutral water to help with the nute burn. New nutes were added after that. Fan leaves are dying and buds are fattening. Checked trichomes and I’m thinking I will begin flushing this week. I’m hoping for a 10-14 day flush unless I start seeing a lot of amber. I’m feeling torn and may harvest the purple trainwreck plants at two different times. There are a lot of cloudy trichomes but there’s still lots of white pistils being thrown out as well. Didn’t see much amber, some buds have more clear trichomes than others. The clone’s buds appear further along than the mother plant. I may flush only one plant this week and start the flush on the other in another week or so. The widow x plant isn’t ready to flush and is growing strong. I accidentally left my timer on “on” when I left during a weekend during week 3 of flower. The widow x plant started to reveg a bit from the 48 hours of light. I forgot this happened entirely and for a while couldn’t figure out why the buds weren’t fattening... but I’m fairly certain that is why that plant stalled so long. So far no hermies or males! That was several weeks ago. I’m now on week seven of flower so I’m hopeful for a completely seedless grow. I will continue adding photos throughout this week. Harvested the bottom branches off to make room for my next flowering plant. I couldn’t wait any longer, it’s getting too tall and I’ll run out of room. This is the clone that was taken the same time as the flowering PT clone. It has been in a veg tent since being removed from the flowering tent. Buds from lower stems are drying and look good so far... Wet weight- .75 ounces~ 21 grams Dry weight- ~.20 ounces~ 5.5 grams

Ultima semana de nuestras northern light xL y aunque no destaquen de las demás por su olor, sacaron un gran tamaño nuestras flores. Bastante productoras, ya veremos en peso que nos dan . Son algo más complicadas de cultivar que las otras 2 del mismo proyecto. Pero no es una dificultad extrema, solo que hay que aguantarlas un poco más y tener cuidado con las carencias ya que chupa bastante comida. No pinta mal esta cepa veremos los resultados las siguientes semanas. Buen cultivo nada de plagas y no tuvimos que tutores todas, solo algunas 😂 Nos vemos la próxima familia.

Mainline continues to take shape. Lots of nodes popping out everywhere. Trimmed and cloned the ones not seeing light. FIM training continues to buff out. Shes just about ready for flower.

Starting to get some nice purple colours on #4 buds and Ozz leaves! Not super visible on the video but looking really good. Also had an unpleasant surprise the other morning, due to wind gusts the support went out the pot and #4 straight bent to 90 degrees. Looks like it happened around 3/4am and I only saw it around 9am, so she got pretty roughened up but no actual damage to report. Same for Dorel, a brush fell on a lower branch but didn’t break anything. The learning here as it is the second time it happens, both time just before I water them: I suspect drier medium is less efficient in holding the plant when there is a lot of wind. Well well! In just 2 days she went from little purple to actually the whole plant changing color. Curious to see where it’ll go!

Day 65, 14th of November 2020: Amazing week.... RQS Wedding Gelato does not strech a lot and pistils coming out nicely.... Original Sensible Seeds has amazing gentics they are so strechy except Black Ghost OG, rest of them crazyyyyyyy..... I also broke two of the sides from Gelato Original Sensible Seeds but fixed with tape and now all good lol 🤣🤣🤣 Pre flowers out and I really hope they stop growing lol. I also noticed that the Original Sensible Seeds strains have nice purple colours of the fan leave's stem. All the same fertilization happens every 2nd day with the mix above and ratio. One more thing: I set the lamp 15 minutes shorter to switch off earlier so they receive 11:45 of darkness. I would like to imitate the nature when longer nights come with time till the 4th week (when they will receive 13 hours darkness a day 15 minutes minus 4 times = 1hour) so every week 15 min longer darkness for 4 weeks and then back to 12/12 to have bigger buds from the 4th week....

Transplanted into oxypot.

Week 10, Day 1... Now its 2 Months since The Ladys startet growin (April 21 ) and I think IT will be 1-2 Weeks to The Harvest, Trichome are Milky.

Monday 29th!!! So this diary is again late and only allowed too add a few images which are mix match, How upsetting 👎 annoying at the least... I've been trying since repotting these girls on monday too upload yet constantly saying resizing photo no matter which folder I upload from so I appolagize. I will try too upload and update this week but if continues will create a new diary and try that way 🤷‍♂️ So as if it were monday 29th I transplanted all the fastbuds testers into their final pots and I have 2 of each whichever I'm very happy with and the other 3 seems slightly slower but still here 🌱 They are now being fed shogun nutrients and hopefully this week they settle in and get comfy ready too begin their vegative journey 👌 I will feed lightly and all girls will start some form of lst next week Hopefully I can update this week properly soon as I like too recap myself as it helps keeping log of what I've been doing 🙄 Shouts too aptus Holland nutrients I gained great roots ready for transplant using their startbooster & regulator which I'll be continuing too use too start of all my seeds/seedlings in future 💪 thank you aptus! 💚 Growers love, stay blessed 💚

Hello everybody 👋🏻 today full moon 🌕. I put the seed in a tupper on top of the router where it gives a good temperature😊. I will put the led at half power (400W) during vegetation and at full power (800W) in flowering. Blue Cheese Auto Blue Cheese Auto from Barney's Farm is a variety classified as indica / autoflowering, it will take longer to make more than the other cars in the catalog but it will surprise us when we finish its cultivation for its incredible quality. In an interior it is a large producer and not only a central truncheon, but it will have multiple satellites surrounding it with bright and compact buds. Putting 4 plants per focus we will extract the maximum potential, which we will have to tutor so that they do not double the weight; get ready to see 500g dry when doing a manual job. In outdoor crops it is ideal for hot climates, where we will get the best harvests when there is the strongest summer sun. The size that usually reaches is good, up to the meter; production is also reflected in the high compaction of this genetics, up to 50-80g dry for each car. It has average resistance to the attacks of pests and fungi so it is better to perform biological preventive treatments during the first 20 days. Type: Feminised Photoperiod: Autoflowering Cultivation INTERIOR / EXTERIOR Genetics Blue Cheese x Ruderalis Indoor Productivity (g) 500 gr / m² Productivity Average (g) 500 Autoflowering Harvest Time from Seed (days) 70 - 75 Height (cm) 80 / 100cm Height in Interior (cm) 100cm % Indica 80% % Sativa 20% Indica / Sativa Mostly Indica Medical No Mold Resistance (5 = Maximum) 4 Resistance to Botrytis (5 = Maximum) 5 Resistance to the cold (5 = Maximum) 5 Oidium Resistance (5 = Maximum) 4 Resistance to Red Spider (5 = Maximum) 4 Warm weather % Stable Stability Difficulty of Growth (5 = Difficult) 1 Bio Tabs Now fertilizing your plants will be much easier; we only have to add the Bio Tabs and the other components that are included directly in the pot when we plant, and the rest of the crop will only add water to our pots. In the middle of the crop you have to apply an irrigation with Orgratrex and Bactrex to reinforce the biological activity and that's it. We will have plants as always, the most productive and tasty, totally organic and without having to worry about excess nutrients or fertilize them. Dosage and how to use the Starter Pack of Bio Tabs step by step: Fill our pots to about 3/4 and add 3g of Mycotrex for each pot, no matter the size. More or less are 3 tablespoons of coffee rasas. Then we add another 25g of Startrex (which comes to be 2 tablespoons) every 5L of soil, so if we have 10L of pot then 50g and so progressively. We stir well to mix with our substrate and just fill the pot of earth. Then we make the hole to transplant our plant to the final pot, and in that hole you have to throw another 2g of MycoTrex into the hole itself and we can now transplant our plants. Then we have to add your Bio Tabs tablets, every 5L of earth a tablet on the substrate, if we have 10L then two tablets ... You have to bury them closer to the edge of the pot than in the center. They are buried about 5 cm deep in the substrate and we will have our plants fertilized for weeks. We make a mixture with the last component that remains when we plant, Bactrex. Add 1g to a liter of water and give the first watering with that mixture. From now on, you only have to water with water until the 5th week. At the 5th week, we will have to contribute a new help to our plants, we will add 20ml of Orgatrex and 1g of Bactrex in 500ml of water and stir well. Water only with that half a liter a plant and only once. Add water until the end of the crop, that's that easy.😋👏🏻👏🏻 Biobizz light mix With Light Mix of BioBizz we will be 100% sure of having bought one of the best lands available for your seeds. Saving on the ground is one of the worst mistakes we can make, since we are starting a job that the final result is to seek the highest quality and production. To think that is where the plant will have to live all its days of life so it will have to be of the best possible quality. With Light Mix you will have an excellent substrate, as each land has a different formula and composition, we will find out who will best resist this substrate, according to the climatic conditions where we are going to plant. It is characterized by its high proportion of water / oxygen retention, this soil pulls more towards water retention so it will be perfect for all those who live in warmer areas avoiding having to water the pots so often, it retains a lot of humidity. We will have to be careful with the first days of our plants so as not to soil the land too much, otherwise the roots will not shoot as they should and you could even drown your plants, this advice is worth all the autoflowering genetics that are more sensitive to root problems and excess irrigation. This sack of earth comes very light of nutrients, so this substrate should provide practically nutrients in all phases of the crop from the second week. Composition: Peat moss Perlite Ec: 1.2 Ph: 6.2