Puues ya queda meenos, o una semana si corren o dos, pero no mas. Las puntas blancas! Jajajajaja blaancas infestadas de resina. Edito 07/02/2026: las primeras fotos son de esta semana hechas el dia 2 de este mes. Hoy 07 he cortado esta planta. Mi intención era cortar las 4 juntas pero es un hecho que esta estaba ya en su punto, tricomas ambar como un 30/40% y el resto blancos. Muuuuy resinosa, peero, con algunas telarañas algunos cogollos hasta el final 😅 no eran todos pero si algunos, por lo que motivo suficiente para hacer budwash o lavado de cogollos. Subo las fotos del proceso igualmente pero lo explico por aquí: 3 garrafas llenas de agua, una de ellas con limón (medio exprimido) y bicarbonato de sodio (un par de cucharadas) y lo remuevo bien, los otros dos con agua. Conforme voy cortando ramas las enjuago con los cogollos en las garrafas, primero la del limon y el bicarbonato y luego en las otras dos y ya finalmente colgados al tendedero y a iniciar el secado, quizá uno o dos dias de mas por el lavado pero bueno. Le pongo un ventilador oscilando enfrente pero alejado para evitar el moho y nada, cuando seque, manicure y enfrasque finalizaré el diario y terminaré de poner los resultados.

Defoliated week two of flower. King tut showed preflower within three days, alien tech has taken about a week longer. Because I had autos in the tent I let these two photos veg about a month longer plus I took clones from both plants so let them recover a few weeks from that as well. Three alien tech rooted and one king tut clone have now rooted. I've never cloned before so think I will do better next time. We installed a second mars hydro tent with two fc3000 lights so we have a 4 by 8 dedicated veg/auto tent. This five by five gorilla tent is now the flower tent for photos. I could probably fill the tent with a single king tut plant easy. The king Tut has gotten huge! Alien tech put a bit of stretch on but is staying more compact and bushy. These plants have been through multiple toppings at a time and lst mainly through my own ignorance but they have pulled through like champs with all the stress. In Cocodelphia which I highly recommend, auto water with hydrolock system 4 times a day for 4 minutes at 550 ppm 6.0 to 6.1 ph dtw. King tut is a little nutrient sensitive which i think is the auto genetics. I could push more ppms but she has a tiny tip of nutrient burn so not pushing it for another week then will up ppms according to general hydroponics schedule from cocoforcannabis. If your new at dtw coco follow their schedule it will get you to the end of your first grow easily.

with a high sativa index and its leaves indicate its wait and it will certainly be worth every second next to this girl in the end i hope that this fatter and more frozen the shape of the Buds is different from the sisters, cannabinoids, terpenes exude strong in the waking air my neighbors 🤪

~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 8/28/21 😺 We decided to flower these a little earlier than we originally intended to make room for some new strains...I will never mainline a plant this wide again indoors lol, it seemed cool at the time but as you can see it just takes up more space 😑 👎🏻 ...we gave them their first shot of bloom nutrients yesterday (we typically do this 1 week before flower but things came up and we learned we'll need the tent available)...the calcium def spots seemed to have cleared up naturally on the mainline, the other plants are fairly uniform in color (not too dark anymore), and lower growth has been removed...all systems go for flower! 💪😺, I'm hoping for a significant flowering stretch, the new growth after the last mainline topping is approx. 6inches, if this stretches to 12-14inches it should build 8 really good sized colas per side.. thanks for reading! We'll update midweek..happy growing everyone!! ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 9/2/21 🐱 be careful what you wish for folks..we asked for stretch and we got it..too much in fact, the node spacing isn't good, far too wide with this strain..we lowered both lights in the tent to get this to stop and turned up the fans to really beat on these for a few days..hopefully this will strengthen them, I really would hate to have to steak these later... ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~

Hi meine Garten Freunde ich hoffe Ihr hattet eine sonnige Woche. Die Pflanzen haben jetzt die 11 Blüte Woche hinter sich gebracht, und somit kommen wir dem Ende immer näher. Jeden zweiten Tag schau ich nach den Trichomen, und ich muss sagen das die Köpfe sehr reif aussehen. Ich gebe den Pflanzen maximal eine Woche dann können sie geköpft werden. Seit Anfang dieser Woche gebe ich schon gar keine Nährstoffe zum gießwasser. Ich hoffe das die n diesen Pflanzen nicht soviele seeds zu finden sind, ich gehe aber davon aus das in der einen oder anderen ein paar vorhanden sein wird. Ich habe vor ein paar Tagen zwei Super Silver Haze Pflanzen geerntet und die waren förmlich verseucht mit Seeds. Ich muss aber gestehen das diese direkt neben den zwittrigen Pflanzen standen, und somit am meisten abbekommen haben. Ich habe nicht komplett mitgezählt haber es müssen um die 400-500 Seeds sein. Ich hoffe das die Pflanzen die ich jetzt noch habe größtenteils verschont geblieben sind. Ich danke euch fürs vorbeischauen. Wie immer könnt ihr gerne ein Like da lassen und mir folgen. Ich werde mich wieder melden wenn es soweit ist, bis dahin wünsch ich euch einen angenehmen Tag.

Thick flowers 8p gettin a big top 😛 These plants are not bigger than 30cm, crazy!! 🤩🤩

The beginning and middle of week 9.. everything is going good, the smells are amazing, I’m getting impatient at this point 🤣

10/19: This morning when I opened up the closet I wanted to rearrange a little, but they were so packed in, it was almost impossible. So, I went up in the attic and ran some cables and hooked up my other 200w light in the top section. I moved the 4 smallest plants up there and it created a little bit of desperately needed space in the lower section...but I still doubt very seriously that I'll be able to grow all 15 to completion in there..it's only 14.5 square feet of space!😳 10/20: I foliar fed everybody with some SP-90 humic/fulvic acid and kelp me kelp you today. They will probably get fed again tomorrow. Drying out quickly- 10/21: I applied Axiom again today..I sprayed a whole liter of the finest mist I could produce..tops and bottoms of all leaves to the point of runoff. I fixed up a 5 gallon batch of nutes and fed everybody about a 1/4 gallon each. Later the same day.... Several of them look very overwatered..and it's mainly the plants in the back in fabric pots that have seen a grow or two. I think my pots are mainly just too close together for airflow to dry the bottoms out well enough. I put another big fan in the closet and turned off the evap cooler for the night. 10/22: Most of them look better this morning, but a few are still droopy, so I used a stainless steel skewer to poke a thousand little holes in the lower part of all the fabric pots in the garden to try and improve oxygen availability to the roots. I also carefully arranged the garden so that there are gaps between all the pots. I think I'll also space my waterings a little further apart. The topsoil is drying out well enough, but I don't want their roots sitting in muck. 10/23: Several of them are flowering now, and starting to stretch a little bit. I raised the lights about 2 inches today and dialed the ac infinity's high temp trigger up to 88f for a bit to get them to dry out a little faster, so the RH climbed a little higher as well...so I also set the ac infinity's high humidity trigger threshold to 65%. After observing signs of nitrogen toxicity on several of them, I realized that I made another rookie mistake...(where is my head??) The new 5 gallon bucket I'm using to mix a batch of nutes must be about 2 inches shorter than the one I had been using, and I never bothered to calibrate it....which I did today. So, for the past couple of feedings, I've been mixing in enough nutes for 5 gallons, but in only 4 gallons of water!!! I foliar fed them with BoomBoom Spray and gave them about 8oz each of boomerang and cal-mag early in the morning, and by 5pm they all looked happier. I'll give them a little drink of plain water tomorrow, then start them on flowering nutes the next day. 10/24: Several are starting to stretch now...and all but one are flowering. This morning I fed them another little dose of boomerang and cal-mag, and also added some bembe and open sesame to the mix. This afternoon, I foliar fed everybody very thoroughly with some humic/fulvic acid, seaweed extract, yucca extract, and big bloom (for the earthworm castings and minor and trace elements) I repotted the dwarf in a smaller container and gave it to my son. He's a bonsai enthusiast, so it's right up his alley...that's one less plant to deal with! 10/25: This evening I mixed up 5 gallons of pretty much everything except grow big. and gave everybody about 1/4 gallon each. I plan to flush them with sledgehammer on Sunday or Monday and only do foliar feedings like BoomBoom spray and fulvic acid until I resume normal bloom feeding mid-week. Because I've had such a good veg, I'm pretty sure the maximum number of plants I'll be able to fit into the lower section is 13...and maybe only 12. So, that will be my 4 or 5 shortest plants in the area above..in which case, I'll need more light... I think the new UVB light will have to wait until my next grow because I've got so spend a couple hundred bucks on seeds to be able to start another batch right before my current run finishes.😖😞😩😡

Powder: GREENHOUSE BIO FEEDING Line which are organic! For LIQUIDS ******GREEN BUZZ LIQUIDS***** also organic. Also i’m using their LIVING SOIL CULTURE in powder form! MARSHYDRO ⛺️ has large openings on the sides which is useful for mid section groom room work. 🤩 ☀️ MARSHYDRO FC 3000 LED 300W ☀️Also special thanks to VIPERSPECTRA P2000 (200W) & XS2000(240w) LED growlights

Début de semaine 4, jour 21 (2novembre)

This was an experiment grow. Seeing if I can grow and flower in a 1 gallon pot with organic amendments. These buds actually turned out better than when I grew this same cut early this year with a bigger pot. Chopped at day 55 of flower on 10/21/25

Flushing 114 days from seed The smell is amazing best smelling bud just need to let finish flushing and maturing. Excited to harvest

This plant was an absolute joy to trim. This plant consisted of buds and stems only, so I am actually curious what the dry weight will be.

Hello, my amazing green-thumbed friends! Welcome to the Week 1 flower report for our beloved P.C.R.s. The transition from veg to flower is a magical time, and our plants are already showing signs of their future glory. Let’s dive into the exciting details of this week! Entering the Flower Stage Our P.C.R.s have officially entered the flowering stage, and the transformation is already visible. The stretch has begun, and you can see the plants reaching up, preparing to produce those beautiful buds we’re all waiting for. This stage is all about supporting their growth and ensuring they have everything they need to thrive. NutriSpray Magic This week, we’ve been diligently spraying Aptus Holland NutriSpray, and the results are phenomenal. NutriSpray is like a spa treatment for our plants, providing essential micronutrients directly to the leaves. It helps with nutrient uptake, reduces stress, and boosts overall plant health. Our P.C.R.s are absolutely loving it, standing tall and proud with their leaves praying to the light. Nutrient Transition With the start of the flowering stage, we’ve made some important adjustments to our nutrient regimen. We’ve stopped using StartBooster and replaced it with TopBooster, which promotes flowering and bud formation. Additionally, we’ve introduced P-Boost, a phosphorus booster that enhances root development and flower production. TopBooster: Encourages larger and more abundant flowers. P-Boost: Provides essential phosphorus for robust root and flower development. NutriSpray: Continues to support overall plant health and stress reduction. Optimal Conditions Maintaining the perfect environment is crucial as we move into the flowering stage. Our TDS is now at 360, with a pH of 5.9 and a temperature of 21°C for watering. These conditions are optimal for nutrient uptake and overall plant health, ensuring our P.C.R.s have everything they need to produce those beautiful, resinous buds. Care and Attention Paying close attention to our plants during this stage is key. Regularly inspecting for any signs of stress or nutrient deficiencies and adjusting care as needed ensures our plants stay happy and healthy. The love and care we put into this process are reflected in the vibrant health of our plants. In Conclusion Week 1 of flowering has been all about setting the stage for a bountiful harvest. With the help of Aptus Holland NutriSpray, TopBooster, and P-Boost, along with our careful attention, our P.C.R.s are off to a fantastic start. The excitement is building, and I can’t wait to see how they develop in the coming weeks. Shout Outs A huge shout out to @aptusholland, our main sponsor, for their incredible products that keep our plants thriving. Another big thank you to @artgenetix for creating the phenomenal P.C.R. strain. And to the wonderful community at Grow Diaries and all our followers, your support and enthusiasm keep us going. Let's continue to grow together! Until next time, happy growing, and may your gardens be full with love and green! Genetics - P.C.R. @Art_Genetix_Team https://artgenetix.world/ Nutricion @aptusholland https://aptus-holland.com/ LED Power @Lumatek and @viparspectra As always thank you all for stopping by , for the love and for it all, i fell blessed to have you all with me for one more love journey Thank you Thank you Thank you , you guys are great and have been amazing , thank you for everything ! #aptus #aptusplanttech #aptusgang #aptusfamily #aptustrueplantscience #inbalancewithnature #trueplantscience #dogdoctorofficial #growerslove
 With true love comes happiness , Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so ! Growers love to you all

She has become a beautiful little bush full of fat dense nuggets completely covered in fruity and sweet resin glands with some purple no tones in the buds. Love It!

August 18, 2024. I received a very kind package from Divine Seeds this week. THANK YOU!! Very excited to get started in this competition. I should have just enough time to grow, harvest and cure before the November 30 deadline. Started the seeds directly in Solo cups filled with ProMix BX and added 5g of Grow Dots with each cup. I'm hoping to see sprouts in around 5 days and will then transplant to their final containers once the leaf tips start extending past the edges of the cups. Game on!!!👍

OG 4Q24 Flower Week 9 Orangegasm (Fem) [ IRIE Genetics ] 12/12 @ Bolt (Day 21) Germination: 20 November 2024 #3A Earliest Harvest Date: 9 February 2025 #3B Latest Harvest Date: 19 February 2025 _________________________________________ Start of Week: [Wed Feb 5, 2024 CR2 4Q24 57:F:8:1] End of Week: [Tue Feb 11, 2024 CR2 4Q24 63:F:8:7] OrangeGasm Fertigation: - MAX: EC: [ 2.4, mS] #Ramping Down - LightIntensity MAX: [ 850, µMol/m2/s] ______________________________________ OBJECTIVES - Ramp EC from 2.4 - 1.0 - Start rolling off Primer A&B/Silica Skin to Resin Bloom . . . __ Wed Feb 5, 2025 OG 4Q24 57:F:8:1 EC: 2.3 Notes: #5 looks like a 60 day plant, if so - consider Saturday Harvest … Runoff - [x] Amount: [ 0.125 , gal] - [x] EC: [ 4.4 , mS/cm] - [x] EC∆: [ 2.5 , mS/cm] # Fried Yet? ;-} Harvest Dehu - [x] Amount: [ 1.5 , g] __ Thu Feb 6, 2025 OG 4Q24 58:F:8:2 EC: 2.3 Refresh Reservoir - [x] Amount: [ 2 , g] - [x] EC: [ 2.3, mS/cm] - [x] Primer A&B: [ 31, ml] - [x] Silica Skin: [ 15 , ml] __ Fri Feb 7, 2025 OG 4Q24 59:F:8:3 EC: 2.3 __ Sat Feb 8, 2025 OG 4Q24 60:F:8:4 - [x] Disassemble, Clean Reservoir and Pumps, Reassemble Refresh Reservoir - [ ] Silica Skin: [ 15 , ml] - Dropping Silica Skin due to (sparse to medium) granular precipitate - [x] Amount: [ 6 , g] - [x] EC: [ 2.1, mS/cm] - [x] Primer A&B: [ 100, ml] EC: 2.1 @1900 - Clear Manifold Filter. (Mainline should be cleared on 1845 feed __ Sun Feb 9, 2025 OG 4Q24 61:F:8:5 - [x] Dilute to EC 2.0 - Flooded Tent, 2 Gallons PLUS of Runoff. Happy Plants. - Shout Out Shop-vac. ;-} EC: 2.0 __ Mon Feb 10, 2025 OG 4Q24 62:F:8:6 EC: 1.8 HAND APPLICATION Prepped One Gallon of 12-8-7-5 @ 1.8 mS/cm w/ PhotoSynthesis Plus, SLF-100 Reclaimed Dehu Water, ~2 Gallons Refreshed Reservoir, 2 Gallons Rooted Leaf Hydro no Silica Skin, EC: 1.8 mS/cm Reduced watering to 5 min, then 1 - 1 -1 -1 -1 -1 -1 -1 (It’s not like they’ve been under-fertigated) __ Tue Feb 11, 2025 OG 4Q24 63:F:8:7 EC: 1.7 - [x] EC: [ 1.7, mS/cm2] - [x] Refresh Reservoir - [x] amount: [ 2.5, gal] Runoff - [x] Amount: [ 0.5, gal] - [x] EC: [ 3.6, mS/cm2] - [x] EC∆: [ 0.9, mS/cm2] # Better than 2.5! PLANT POSITIONS 3 5 1 7 4 2 6 8

Our #15 grows really well, the leaves are perfect and tapered a little curved perhaps but I think that's the effect of the beginning, the stem is straight and does not bend and is very well proportioned. I am giving Plagron Pwer Roots rooting soon starting with Alga Grow. The plant grows well, the leaves are regular and very turned towards the light, it is very proportionate even I don't see stretching, bending and things that don't convince me. The girls have already been poured into 11 liter jars because the biodegradable jars have started to decompose prematurely, no problem let's go to the ground. Music of the week provided by Radio Nula from Slovenia. https://radionula.com/ Thanks to friends of Seeds Mafia try this and their other creations seeds > https://seedsmafia.com/en/ Light and tent > https://marshydro.eu/products/marshydro-sp3000-led/?lang=it