Likes
Comments
Share
~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ We planted 5 seeds, our goal is 2 plants of this strain for this 4x4 (all extra plants will live out in the 5x5)..we're using a brand new light for this grow, the Solux350 by Hortibloom! 💡🌱(https://hortibloom.com/products/solux-350-led-grow-light)... This tiny fixture emits a ton of light for its size..we have 20 seedlings under her, hung at the recommended 24inches and at 25% power..I'm really excited to see what this light is capable of! Thanks for dropping by and happy harvests everyone!! ❤️💡🌱😽💨 ⚡Hortibloom/Solux 350⚡ Specifications ⚙️: Diodes: Samsung LM281 Pro / Osram DR (1,440 total)💡 Driver: Inventronics 350 watt🔌 PPF: 1015 μmol/s ☢️ PPE: 2.9 µmol/j 〰️〰️ Lifespan: 50k+ hrs ⌛ Weight: 14.3lbs lbs (6.5kg) Veg Coverage: 5 x 5 ft 🌱 Flowering Coverage: 4 x 4 ft 🌼 -The Solux 350 uses an aluminum heatsink (no fan) for quiet operation 👂⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Many units may be daisy-chained via RJ14 and dimmed from a single controller 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~
Likes
4
Share
@Ryno1990
Follow
The Rhino Ryder from @fastbuds is coming along really nice starting to get some buds popping up all over the Strawberry gorilla from @fastbuds is starting to come back from it being stunted for some reason think it mite of been locked out because she definitely doesn't need nutrients that much had to cut her feedings in half to stop nutrient burn
Likes
1
Share
@0JuJu0
Follow
The leaves are a little bit dead but she will be potent. The buds looking great.
Likes
3
Share
🌿Week 4: Defoliation & SCROG Setup Week 4 was all about structure and airflow. The canopy was getting bushy fast, with a ton of inner growth, so we went in for a solid defoliation session across the board. Lower fans, overlapping leaves, and shaded internodes were cleaned up to let light penetrate deeper into the canopy and reduce potential humidity traps. Right after that, we finally dropped the SCROG net, stretched out gently across the canopy to guide the branches horizontally and prep for flower stacking. Some of these phenos are already reaching for the sky, so the timing felt just right. Captured a full-time-lapse clip of the defoliation + netting process. It’s super satisfying watching the chaos turn into clean lines. Nature meets intention. Feed Bloom since 20/6 22/6 Defoliation 🌱 Plant Response: After defol, they bounced back fast. Tops are perky, leaves are praying, and stretch is continuing in a controlled way. The structure’s more open now — better airflow, better light distribution, better everything.
Likes
3
Share
Tag 15 Mädels gehen in dieWachstumsphase 0,5l Wasser mit einem ph wert von 6,0 Licht bei 45cm Abstand mit 60% veg mod Automaticflow macht als Substrat Dünger bis jetzt einen guten Eindruck. Tag 18 Jetzt gehen sie in die Stretch und Wachstums Zeit, meine Lieblingszeit! Da ich diesen Dünger ( Automaticflow Hybrid Substrat) zum ersten Mal benutze, bin ich gespannt wie er performen wird . Licht ist jetzt auf max. ( 65w veg mod ) mit 60cm Abstand Wasser alle 3 Tage 0,5l, ph 6,0
Likes
5
Share
@MrrNice
Follow
**English** The light was changed to 12/12 . The plants are growing well, so far I have nothing to complain about. **Deutsch** Das Licht wurde auf 12/12 umgestellt. Die Pflanzen wachsen gut, bisher habe ich nichts zu beanstanden.
Likes
16
Share
@Easygroow
Follow
We entered 5th week today. 👀 I'm really happy with everything so far. Bare in mind we still have around 3weeks to go, so them buds hopefully will double or triple in size on those upcoming weeks🤞 But if not, i will be happy anyways because they are so frosty already 🤩 Smell in a room is also nice. Sweet, and really strong. See you next week🙃
Likes
5
Share
October 10th she started her 9th week and got her last nutrition. i will harvest her next week or even this weekend.
Likes
24
Share
@Elixx
Follow
In this week wheatear was very bad. It rain a lot and plant suffer, It was attacked by mold in one of the apical buds. I remove it in the first stage of mold, I hope that spores was not spread on the rest of plant🌧️😥
Likes
3
Share
The ladies were flushed on the 68th and will be flushed again on the 71st. Analyzing the resin with a magnifying glass, I think we will not have a harvest before the 75th. B3 this blooming I think she will be looked after with more than 80 or 83 days.
Likes
11
Share
@GBudz
Follow
Overall very happy results from this Auto Alueberry OG it is an unreal autoflower strain producing very top shelf buds strong effect nd pungent flavour/smell. . Thanks to Dutch Passion top quality genes.
Processing
Likes
32
Share
noto que estan comiendo mucho, osea se secan rápido que es que estan comiendo bastante de lo comun. Las ojas tornandose color amarillo para cambiar a color vino. se ven muy bonitas y estan fewlices. No he cambiado mucho entre los nutrientes (Té y Recharge), he sostenido alimentarlas simples y he tenido muy buenos resultados. muy contento con todo, sigas adelante, buenos humos y feliz 2021
Likes
25
Share
week intel: everything is perfect! stresses : just a little E.C stress around 1.7 once a week feeding: i feed them 3 times this week with this order : day 1 : i feed them heavy with silicate +base nutrients(calcium & micros + Bloom) about 818 ppm - 1.7 e.c to cause a little stress. day 3 : i feed them low dose of Feeding Booster + Karbo Boost around 382 ppm - 0.7 e.c to let them recover a little but not fully recover still a little stress will caused. day 5 : i feed them with low dose of Top-Max + B-52 around 250 ppm - 0.5 e.c to let them recover the stresses to get ready for another stress next week. guide of the week : know your plant tolerance limit of E.C stress once you saw the very very little yellowing on tips of leaves , that's the sign to don't go further , never reach that limit if you want a high quality buds, in my case tolerance is 1.8 and i'll reach to that level only once a week to cause precision stress , love your plants and have a happy growing!
Likes
Comments
Share
8/21/24 gave her some cal mag from the uprising foundation. 5 ml total for the 5 gal pot. 3 tsp of grow and 2 tsp of bloom. slowly transitioning from grow to bloom over the course of 4 weeks. did some light defoliation and some lollipopping. shes not too bushy in the sense of leafy. her fan leaves have super long petioles. 8/26 she's grown four inches so far this week. about an inch a day. wild.
Likes
24
Share
NOTES: Keeping pH at 5,8-5,9 through the entire Vegetation-phase. EC is now around 1,2 and i'm increasing it if needed. I'll be checking the levels regularly from this week since all of the hydroponic systems are now running. I'm going to add some ice cubes in to the nutrient tanks to cool nutrient solution a bit always when I remember to, even though temperatures haven't been an issue so far. Can't do any harm so why not I quess. I'm also adding a CO2-bag in to the tent above the plants. Also I'll begin training my plants this week by topping them. Day 22 (8.11.) Lights are set to 70%, water pumps are now on for 24/7 (EBB's drain water is on lowest setting possible to avoid drowning the roots) and pH is 5,8-5,9 / EC 1,2-1,3 on every hydroponic system. I topped all of my plants and cut off all of the lowest leafs with single tips and some of the small nodes starting from them. Day 23 (9.11.) pH-level keeps on raising so I'm gonna be measuring it pretty often. I'm correcting it by adding some pH- while filling up the nutrient tanks with small amounts of fresh nutrient solution at a time. Everything's going well and I can't wait to flower these! Day 24 (10.11.) Lights are now set to 80% power at 70-75cm height from the tops. I cut off the rest of the lowest nodes which I had left to some of the plants while topping them. I don't think they would get enough light when they are bigger. Day 25 (11.11.) Removed the lowest (three-pointed) leafs of each plant. Day 26 (12.11.) I moved the Led's a bit higher (now at ~90cm above plants) and set them up to full power. Plants are now around 11-14cm height and growing like crazy! Day 27 (13.11.) The growing has exploded and these plants are getting bigger and bigger. I'm going to defoliate them lightly and remove the lowest nodes so the plants have around 6 nodes each going forward, hopefully I'll get an even canopy. Day 28 (14.11.) I changed new nutrient solution in to the EBB-flood system which has the Ayahuasca's on it. I'm keeping the EC at around 1,3-1,4 and pH at 5,8-5,9 on every system. Also added small amount of Cal-Mag in to both NFTs.
Processing
Likes
15
Share
@Dico29
Follow
They are starting to shoot some pistils. I added some random store fertilizer that is 1-4-7 and put it in the 3 gallon. I poured it in a water bottle and just eye balled it pretty slow and not for long. It seems to help
Likes
54
Share
Flowering day 63 since time change to 12/12 h. Hey guys :-) The end has come 😍 Over the next 3-7 days the lady is placed in the darkroom for 48 hours before being harvested and hung upside down. The trichomes are checked every day to find the perfect time 👍 Watering was done twice this week with groundwater, each time with 1.2 l. Have fun with the update and stay healthy 🙏🏻💚 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 ‘Powered by GreenHouse Feeding’ Copy the link for 10% off all Nutrients 👇🏼 https://shop.greenhousefeeding.com/affiliate/MadeInGermany_PassionGrower 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://www.amsterdamgenetics.com/product/choco-cheesecake/ 👇🏼👇🏼👇🏼 Use the coupon code: madeingermany for 10% on all Amsterdam Genetics seeds Water 💧 💧💧 Osmosis water mixed with Cal/Mag (24 hours stale that the chlorine evaporates) to 290 ppm and Ph with Ph- to 5.8 - 6.4 MadeInGermany