D-29 : I made a mistake. I think the second top I did today was too soon. Only 4 days after the first one. What is done, is done. Now, let see what happend but, I'll wait more for the last top. I think I'll wait untill the new mains have at least 3 new real nodes. D-30 : Every thing is ok except that the new mains are really really really small.... It should be better in a couple of days. D-33 : Everything is ok ! What should I say ?!

Day 36 of flower Watering day 3 gallons of water ph to 5.87 With a runoff of 25% to 30% . 1 blue dream 1 I'm pretty sure its Afghan hindu kush not white kush Grow light: mars hyrdo tsw 2000 at 100% power 24inches above 🌞☀️ Medium: coco coir mix with compost at a 50/50 ratio with 30% perlite added⛰️ Nutrients: fox farm dirty dozen 🦊🚜 Grow space: 4x4x7 Water: tap water (my tap water is allows 110ppm) left out for at least 24hours

I feel like the overall cycle length of this is a lot longer than stated. They have been growing for nearly 15 weeks. I believe they could have done with an extra week but we needed the space to add other clones that were ready.

Popped in 5 only 1 popped out. Very disappointed but excited to see the one grow. Thinking I may have popped in the soil prematurely.

Hey growmies, It's been four days since the last short. Today, the Pink Gelato finally started drinking water again. Looks like the cinnamon and light watering actually helped. The other plants are doing okay, but the heat’s getting to them too. I think harvest time is coming up soon – just gotta find the right moment to start drying. All three plants got two liters with Cal-Mag today. Fingers crossed they all pull through!

Ztrawberriez auto is growing great. She is starting to stack and has been very hungry. She has a great layer of frost started. Everything is looking really good at the moment. Thank you Fast Buds. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g If anyone needs to purchase fastbuds here is a link for my affiliate program https://myfastbuds.com/?a_aid=60910eaff2419

It’s more so like 14 days into flowering but No biggie. She is stunning along recovering for Magnesium scares. Little to note other than stems hardening. The more the merrier and we shall be full of Cured Buds before the Holidays! The Original seed etiquette is still intact! - GHL -

Day 43 12/08/24 Monday Feed today, it was warm again so they drank the whole 300ml each so I have topped up another 150ml to see run off to prevent salt build up. All thriving 😍✌️💚 ACOP and Melonade Runtz structure is stunning 💪 Divines Overdose is getting chunky and showing nice stack potential 👌 Leaving these to just run there natural course, will allow me to best pick my next SOG run with micro autos indoor 😎 Video update Day 45 14/08/24 Wednesday De-chlorinated tap water pH 6 only today. Day 48 17/08/24 Saturday Another watering today using de-chlorinated tap water pH 6 only. Orange bud is tall!! Top her next time. Critical orange is lovely and compact. Overdose is nice and compact, Melonade Runtz nice compact structure also. Picture and video update ✌️ 💚

Germinated in paper towel and then in soil prepared 24 hours before just with water. I decided to do outdoor cause temperature now is good but i m not sure is going to be hot enough for all the month.

2nd net is up. Early bud formations are promising. holding up to the extremes pretty well, some leaves taking minor damage, but overall, she is holding up, gave her 1 night at 50F see how she would react, stressful. Not advised as it messes with her metabolism, but I want to see if it triggers any anthocyanin response. Love to see her purp up but no signs yet. My homework. Rubisco regeneration is intrinsically linked to nitrogen supply because Rubisco is a major sink for nitrogen in plants, typically accounting for 15% to over 25% of total leaf nitrogen. The regeneration phase itself consumes nitrogen through the synthesis of the Rubisco enzyme and associated proteins (like Rubisco activase), and overall nitrogen status heavily influences the efficiency of RuBP regeneration.Structural Component: Nitrogen is an essential building block for all proteins, and the sheer abundance of the Rubisco protein makes it the single largest storage of nitrogen in the leaf. Synthesis and Activity: Adequate nitrogen supply is crucial for the synthesis and maintenance of sufficient Rubisco enzyme and Rubisco activase (Rca), the regulatory protein responsible for maintaining Rubisco's active state. Nitrogen deficiency leads to a decrease in the content and activity of both Rubisco and Rca, which in turn limits the maximum carboxylation rate, Vmax, and the rate of RuBP regeneration Jmax, thus reducing overall photosynthetic capacity. Nitrogen Storage and Remobilization: Rubisco can act as a temporary nitrogen storage protein, which is degraded to remobilize nitrogen to other growing parts of the plant, especially under conditions of nitrogen deficiency or senescence. Nitrogen Use Efficiency (NUE): The allocation of nitrogen to Rubisco is a key determinant of a plant's photosynthetic nitrogen use efficiency (PNUE). In high-nitrogen conditions, plants may accumulate a surplus of Rubisco, which may not be fully activated, leading to a lower PNUE. Optimizing the amount and activity of Rubisco relative to nitrogen availability is a target for improving crop NUE. Photorespiration and Nitrogen Metabolism: Nitrogen metabolism is also linked to the photorespiration pathway (which competes with carboxylation at the Rubisco active site), particularly in the reassimilation of ammonia released during the process. To increase RuBisCO regeneration, which refers to the process of forming the CO2 acceptor molecule Ribulose-1,5-bisphosphate (RuBP) during photosynthesis, the primary methods involve optimizing the levels and activity of Rubisco activase (Rca) and enhancing the performance of other Calvin-Benson-Bassham (CBB) cycle enzymes. Biochemical and Environmental Approaches: Optimize Rubisco Activase (Rca) activity: Rca is a crucial chaperone protein that removes inhibitory sugar phosphates, such as CA1P (2-carboxy-D-arabinitol 1-phosphate), from the Rubisco active site, thus maintaining its catalytic competence. •Ensure optimal light conditions: Rca is light-activated via the chloroplast's redox status. Adequate light intensity ensures Rca can effectively maintain Rubisco in its active, carbamylated state. •Maintain optimal temperature: Rca is highly temperature-sensitive and can become unstable at moderately high temperatures (e.g., above 35°C/95F° in many C3 plants), which decreases its ability to activate Rubisco. Maintaining temperatures within the optimal range for a specific plant species is important. •Optimize Mg2+ concentration: Mg2+ is a key cofactor for both Rubisco carbamylation and Rca activity. In the light, Mg2+ concentration in the chloroplast stroma increases, promoting activation. •Manage ATP/ADP ratio: Rca activity depends on ATP hydrolysis and is inhibited by ADP. Conditions that maintain a high ATP/ADP ratio in the chloroplast stroma favor Rca activity. Enhance Calvin-Benson-Bassham (CBB) cycle enzyme activity: The overall rate of RuBP regeneration can be limited by other enzymes in the cycle. •Increase SBPase activity: Sedoheptulose-1,7-bisphosphatase (SBPase) is a key regulatory enzyme in the regeneration pathway, and increasing its activity can enhance RuBP regeneration and overall photosynthesis. •Optimize other enzymes: Overexpression of other CBB cycle enzymes such as fructose-1,6-bisphosphate aldolase (FBA) and triose phosphate isomerase (TPI) can also help to balance the metabolic flux and improve RuBP regeneration capacity. Magnesium ions, Mg2+, are specifically required for Rubisco activation because the cation plays a critical structural and chemical role in forming the active site: A specific lysine residue in the active site must be carbamylated by a CO2 molecule to activate the enzyme. The resulting negatively charged carbamyl group then facilitates the binding of the positively charged Mg2+ion. While other divalent metal ions like Mn2+ can bind to Rubisco, they alter the enzyme's substrate specificity and lead to dramatically lower activity or a higher rate of the non-productive oxygenation reaction compared to Mg2+, making them biologically unfavorable in the context of efficient carbon fixation. The concentration of Mg2+ in the chloroplast stroma naturally increases in the light due to ion potential balancing during ATP synthesis, providing a physiological mechanism to ensure the enzyme is activated when photosynthesis is possible. At the center of the porphyrin ring, nestled within its nitrogen atoms, is a Magnesium ion (Mg2+). This magnesium ion is crucial for the function of chlorophyll, and without it, the pigment cannot effectively capture and transfer light energy. Mg acts as a cofactor: Mg2+ binds to Rubisco after an activator CO2 molecule, forming a catalytically competent complex (Enzyme-CO2-Mg2+). High light + CO2) increases demand: Under high light (60 DLI is a very high intensity, potentially saturating) and high CO2, the plant's capacity for photosynthesis is high, and thus the demand for activated Rubisco and the necessary Mg2+ cofactor increases. Mg deficiency becomes limiting: If Mg2+ is deficient under these conditions, the higher levels of Rubisco and Rubisco activase produced cannot be fully activated, leading to lower photosynthetic rates and potential photo-oxidative damage. Optimal range: Studies show that adequate Mg2+ application can enhance Rubisco activation and stabilize net photosynthetic rates under stress conditions, but the required concentration is specific to the experimental setup. Monitoring is key: The most effective approach in a controlled environment is to monitor the plant's physiological responses e.g., leaf Mg2+ concentration, photosynthetic rate, Rubisco activation state, and adjust the nutrient solution/fertilizer to maintain adequate levels, rather than supplementing a fixed "extra" amount. In practice, this means ensuring that Mg2+ is not a limiting factor in the plant's standard nutrient solution when pushing the limits with high light and CO2. Applying Mg2+ through foliar spray is beneficial to Rubisco regeneration, particularly in alleviating the negative effects of magnesium (Mg) deficiency and high-temperature stress (HTS). While Mg can be leached from soil, within the plant it is considered a mobile nutrient, particularly in the phloem. Foliar-applied Mg is quickly absorbed by the leaves and can be translocate to other plant parts, including new growth and sink organs. Foliar application of: NATURES VERY OWN MgSO4 @ 15.0g L-1 in a spray bottle. Foliar sprays are often recommended as a rapid rescue measure for existing deficiencies or as a supplement during critical growth stages, when demand for Mg is high. Application in the early morning or late evening can improve absorption and prevent leaf burn. The starting point [of creativity] is curiosity: pondering why the default exists in the first place. We’re driven to question defaults when we experience vuja de, the opposite of déjà vu. Déjà vu occurs when we encounter something new, but it feels as if we’ve seen it before. Vuja de is the reverse—we face something familiar, but we see it with a fresh perspective that enables us to gain new insights into old problems. Come walk in the enchanted forest.

11/17: I fed today but didn't have time for much of a photo session. Gave them One, Signal, Sweet & Sticky, Cha Ching, and started them on LiquidSoil. 11/19: Still fattening, and beginning to frost up as well.

08.11.2020 | Finally it looks like the ladies are starting to grow _________ 10.11.2020 Maybe a bit to „early“ but because they are autos i prefer them to be as early as possible in the big pots. 11Liter pots. ______________ 14.11.2020 girls starting to grow nice. also started with biobizz bio grow 2ml/l.

I currently have the ladies drying in my dry tent on day 3 now. I have my temperatures around 61-63 degrees stable, with 50-60% RH fluctuating. Will be updating the diary with weights once they finish drying and I get them all trimmed up! Thanks everyone for taking a look, super stoked with how my first run turned out and will be starting my second run in the next few days as well so super excited. I have learned a lot from this run and looking forward to implementing things into my next run to improve. Will also update more info about the strain once I have it for sure. I will be pressing some of the flower and all of the dry sift from the trim. So if you are interested in that as well feel free to ask. Thanks everyone for checking out my diary! Good luck with all your grows and best wishes! Dried for about 9 1/2 days. Just finished a 12 hour trim session, that was a lot. I ended up with 18.3 ounces of nicely trimmed buds, and a ton of larf and trim (26 ounces) which is fine because I will be dry sifting and pressing on the nugsmasher! I did press out a little and have some work to do to figure that thing out and dial it in. I have learned a ton from this grow and look word to applying to my current grow. I see and have a much better understanding of feeding, training, and now I kinda see what is and is not going to developed that much. Going to give these girls time to cure. Will update. Thanks As always tips and recommendations appreciated!

This week i flush the roots with tap water ( PPM : 310 , PH : 7.5) after i add water with 0.7 grow powder and 0.1g of Booster PK+ to reach 720PPM and adjust PH to 5.8 ---------------------------------------------------- -Daytime temperature: 27°C -Night temperature: 23°C -Humidity: 45-65% -Lamp: Mars Hydro FC3000. intensity 80% at 40cm from the top leaves -Room: Mars Hydro 100x100x180cm -Extractor: Mars hydro 402 CFM Max. power 2/10 -Substrate : 70% coco, 25% perlite, 5% vermiculite. My instagram : https://www.instagram.com/p/CuMhQ_BsjRP/?utm_source=ig_web_copy_link&igshid=MzRlODBiNWFlZA==

Hi everyone 🤗 This week it looked more and more astonishing after opening the box a wonderful sweet smell wafts through the room 👍. A few days ago the Blue Cheese Phenotype 1 was harvested and placed in the dark room :-). This week both Kosher Tangie Kush phenotypes will be harvested 👍. Next week the Blue Cheese phenotypes 1 and 2 will be harvested ;-) everyone else needs a while 😀. I wish you all a nice week, stay healthy 🙏🏻 and let it grow 🌱👍

Week 2 of flower and the pistils are starting to shoot out. I've been watering pretty consistent every other day, F drinks a lot and gets thirsty the quickest. Clones are pretty big and the light is dimmed down a bit, I'll transplant them up to I think 3 gallon pots soon Lollipped a good 6 inches off the bottom of the plants over the 2 cuttings and they look good and healthy, in the next coue weeks they will start getting into their full development.

On Dez 25 I flew to Thailand so my father had to gave the planst nutriens and water I Wrote him a what and how much he should give .

Had a good week with some good growth. They started off a little slow due to transplant mistakes but once I figured it out and fixed it they took off. I think the unknown bag seed might be a male check the pics. I wanted to top them but most they seem to want to stay short. I'll top in a day or two. They are drinking plenty between feedings and they seem to love the grow big. I'll step it up today when I feed and see how they like it. Dont have many pics yet had to move my grow and havnt had time to take proper pics but these are not bad.

Growth slowed a bit after toping and ML technique started. Everything is being trained outward. Waiting on the 4 mains to develop enough nodes before I make more cuts. Watering still at 28oz (6.0~6.5pH) distilled water.

Going well