Likes
Comments
Share
Shit got serious, my biggest fear has come true, the XXL pheno is here She has grew even more than the roof so i had to perform the LST in order to provide her some regular light instead of the madness she was being This is going crazy as hell wtf this auto is growing even more than the photoperiodic ones
Likes
2
Share
@Ay_ef_see
Follow
More growth plus added co2
Likes
74
Share
@AsNoriu
Follow
Day 118. Girl is on pure water diet, but chunked up , branches heavy just my yellow leaves OCD force to hate her a bit ;)))) One week left for her, next Wednesday or Thursday she is wet chopped and dried . Last Lemonade OG, all went 110 g +. Nuts strain, amazing journey with all Autos, it was a real mini Insanity sometimes ... Happy Growing !!!
Likes
14
Share
@Terpyboyz
Follow
So this grow came to a finshed but I had a. Few issues that’s held me up from finishing up the diary, but in due time I will reupload it all in order soon. But over all I will also update with a final weigh in of each strain produced so stay tuned 🤙🏻🔥
Likes
4
Share
@pzwags420
Follow
On day 1 I changed out my reservoir. I lowered my nutes to 650 ppm(25% reduction). I adjusted the PH down to 6.1. My left plant has some burnt tips from either PH shift or over fertilization. My hope is that the lower ppm will help to resolve the issue before it spreads. On day 2 I adjusted the reservoirs PH from 6.3 to 5.9. On day 3 the reservoirs PH is 6.0. I installed my new 200 watt HLG Rspec. I adjusted PPFD readings to 700-1300 PPFD on all tops. On day 4 I adjusted the reservoirs PH from 5.8 to 6.2. On day 5 I adjusted the reservoirs PH from 6.4 to 6.0. I diluted my nutrients in my reservoir by removing one gallon of nutrients from the rez and and adding 2 gallons of straight tap water to the rez. This brought the nute concentration from 770 ppm to 540 ppm as the plants will be entering the ripening stage in a few days and they have too much nitrogen judging by the extremely dark green leaves and burnt leaf tips on some branches of the left side plant. The buds seem slightly smaller then my last run which may be due to an excess of nitrogen and maybe not enough light as some of my tops are taller then the others making proper PPFD challenging. All in all the girls are coming along nice and I look forward to the final weeks of flowering 😀 On day 6 I adjusted the reservoirs PH from 5.9 to 6.2. I think I have halted the nute burn as I haven't seen it progressing any more on the leaves. I will continue to monitor closely during these final weeks. The trichome production is increasing with some trichs on top of colas starting to go cloudy. The pistils are turning brown with roughly 40-50% are turning brown all signs I'm getting closer to the harvest window 😆. I dimmed my light to give 600-1000 PPFD to tops. On day 7 I reduced my temps to 75 during the day and 68 at night. I adjusted the PH of the reservoir from 6.6 to 6.1. My reservoirs ppm was too high so I diluted the rez with 2 gal of tap water. This brought it down to 480ppm. The average ppfd to all 14 tops is 604 with no top receiving more than 1000 ppfd
Likes
3
Share
La primer semana se flora vinene muy bien , fertilizamos unas semanas antes con fertis de pre flora , a los 15 días vamos a hacer el último riego foliar con ferstis y un riego con guano de murciélago con melaza para mejores resultados
Likes
12
Share
Hi! It came to the point that I am running out of buds. Literally. i gotta come clean and admit that I couldn’t let her mature for one more week 😪. But you my situation right? One thing I am sure is that this is quality smoke 💯❤️💪 Ps Orion
Processing
Likes
14
Share
Likes
37
Share
@Cremo
Follow
So here we are, at the end, a few months later. I was so happy that I'll finally grow a plant without any training at all, just to see the full and uninterrupted genetic expression. It was a blast to grow her, I can't wait for the plant to dry and give it a few weeks of curing but she smells great already. I also wanted to thank Divine Seeds for the contest strain and Bio Tabs for great Bio fertilizer. You can judge for yourself because I'll let the photographs speak for themselves. Speaking of photography, I went with a moody style this time, because she has a great structure. I've trimmed her a little bit here and there and I've left a few big fan leaves on both sides for better looks. The big fan leaves reflect the light so well, it make the whole plant shine. Okay now head to the gallery and let all that sink in ;) XOXO Cremo
Likes
2
Share
This is the last day of her life. Shes getting a bath of sun with 40c outside. After she will finish in the dark until i harvest her tomorrow Shes trying to get pollinated by throwing some new pistils here and there, but trichomes are cloudy mostly with amber tone. Not a lot of clear one.
Likes
2
Share
Så fik jeg mod på gå i gang med mine barnyesfarm frø:) (nu jeg kun lavet 3planter ud af 20 på 5mdr af deres genatik mistede lidt modet ! Men jeg har fundet ud af, det var egentlig min egen fejl, de ik blev bedre! Så nu bare back to the roots💚💚❤️
Likes
52
Share
I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"
Likes
2
Share
@PalmaGrow
Follow
Hermosa floración mucha resina Defoliación para permitir mejor ingreso de luz 25 - 31 agosto
Likes
35
Share
Penultima semana de FLoracion, ya comenzaremos con el lavado de raices, se siente bastante el olor que emana de las plantas. Pero este olor es mas a fruta, olores dulces bien marcados, el olor me recuerda mucho al mango
Likes
14
Share
@TPBzh
Follow
I still had some spots on leaves, but look like the calmag is doing the job. New leaves look better for now. It smell stronger, and plants are drinking a bit more now. Not sure, but i think no more than 3 weeks b4 harvesting HulkBerry 1 and the cookies gelato familly. Royal Bluematic 1 seems to take more time, but is growing well. HulkBerry 2 and mostly Royal Bluematic 2 are really late and weak compared to the others.
Likes
4
Share
@Freddd
Follow
The phenotypes are now very distinct, the small plant's leaves go directly from green to dark plum colour they do not go yellow at all. Unlike the early orange bud. It almost looks like it has a blue light on it.
Likes
92
Share
Week 13: Week 5 Flower—A Garden in Full Bloom 🌸✨ Hey, Grow Fam! 💚 We’re deep into Week 13, and this room is nothing short of mesmerizing. Each plant is unique, showcasing its trichome-coated beauty, with white hairs dancing in their distinct patterns. It’s the culmination of patience, hard work, and overcoming challenges. The two-layered canopy—thanks to some ambitious young ones—is a testament to adaptability and dedication. 🌱🌟 Feeding Update: Aptus Holland Breakout Powder This week, we introduced Aptus Holland Breakout Powder into the feeding mix at 0.5g/L, alongside the nutrients already in use. This powerhouse additive is designed to promote robust flower development, enhancing both density and resin production. Breakout Powder brings that extra “oomph” to the table, helping the girls truly break out into their full flowering potential. 🌺💪 Combined with our existing recipe, the results are already starting to show. Buds are swelling, trichomes are shimmering, and the room smells heavenly. If you’ve ever wondered what a well-rounded feeding schedule can do, this week’s results are the answer! TrolMaster Magic: Monitoring & Stability I’ve included a few TrolMaster app prints to share my love for this system. It’s not just about controlling the environment; it’s about mastering it. The app provides real-time data, historical records, and an unmatched level of convenience. Whether I’m sipping coffee or working in the garden, the system keeps me in sync with my grow. This week, I’m particularly thrilled about how stable the pH levels have become since transitioning to full mineral-based nutrients. Unlike the organic-mineral combo, which required frequent adjustments, the current setup is practically self-sufficient. This stability means happier roots, more consistent nutrient uptake, and ultimately, better plants. The data speaks for itself—check out the comparison print! Comfort & Style: My Aptus Holland Pants Oh, and can we talk about how comfortable my Aptus Holland pants are? These have become my go-to garden gear. Stylish, functional, and perfect for spending long hours among the plants. Let’s just say, my plants aren’t the only ones dressed to impress! 😂👖 Shoutouts & Gratitude As always, a huge thank you to the amazing people and brands that make this journey possible: • TrolMaster for the tech that keeps me connected to my grow. • Aptus Holland for the nutrients that take my plants to the next level. • Pro Mix for the growing medium that supports this foundation. • Cannakan for ensuring my seeds get the perfect start. • And of course, the seed banks for these incredible genetics. A special shoutout to the community—followers, friends, supporters, and even the haters. You all bring energy to this space, and it’s all apprecialoved! Let’s keep growing stronger together. 💚 #TrolMaster #AptusHolland #GrowLife #CannabisCommunity #FlowerWeek4 #NeverGiveUp #GrowWithLove #IndoorHorticulture #Defoliation #PPFD #ControlledEnvironment #SCROGNet #DogDoctorOfficial Discount Codes so you can save big on your next check out 💚💚💚 Kannabia - DOGDOCTOR 30% off SeedsmanSeeds - DOGDOCTOR 10% off CannaKan- DOGDOCTOR 15% off terpyz.eu - DOCTOR 15% off The Neutralizer - PORKIT5-DOG 15% off Fast Buds - DOGDOCT 15% off As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 Friendly reminder all you see here is pure research and for educational purposes only Growers Love to you all 💚💚💚
Likes
35
Share
Bueno familia ya finalizamos, estas red hot cookies son una cepa bestial. La verdad que el secado muy bien 7 días en Malla y a los botes, 45% humedad y 23 grados es la temperatura ambiental que han tenido en el secado. 4 plantas que se cultivaron en un armario de 1.20 pero estos ejemplares solo ocuparon 80x80. Así que ya está cultivada esta gran variedad que es novedad este 2020, americana de la familia Cookies, la Tropicanna Cookies (Girl Scout Cookies x Tangie) con un porcentaje de thc entre los 17/25%, una bomba. Que decir de Agrobeta, lo peta 💪 en cuanto a nutrientes. Un saludo y buenos humos.
Likes
2
Share
2 weeks later and Girl crush is throwing out 12's... I will have to top her soon. I took her 1st two liters to prop clones but they failed repeatedly. She isnt a big stretcher and I'm not limited by vertical space at all so I'm not worried [even though my auto's are at the very least 30 and 45 days away from full maturity respectivly.] The ogreberry is somehow even easier to train than the whiskey zulu at this stage. The canopy is much more even and we'll just have to see if that remains true. This ogreberry smells fucking wild. The other two plants smell good and unique but the Ogreberry smells like fruit loops, lemon and the strongest note I smell every single time I test it, I can only describe as the "new" smell a baby gives off. I dont know if that's from the sweet cream of baby formula or what because I don't have a much experience with babies, but this is a very baby-like smell. It's shockingly absurd that this plant smells like an infant. This "new" quality reminds me of northern lights.