Processing
Likes
13
Share
@neuraxis
Follow
Started from seed this lady's have 17 days under half load 4 X 50W Cree CXB3590 CRI 80 3000K custom build led. 7days in rockwool cube under a dome , 10 days in 750ml pot. Freshly transplanted into to final pot. They have received 250ml of fertilizer solution and transplation soil was moisted with 6.5PH water. Led now running on full load. This project have some custom/extra gadget, a prototype growing controler. Hardware Specs: Raspberry PI 4 4Go Ram + SSD 120Go Phat sparkfun qwiic i2c hub + i2c sensor for : temperature,humidity, co2, tvoc, air pressure and distance measurement(plant height) Linked with one custom wifi power bar for schedule and countdown. One sonoff pw r2 for energy monitoring. Both using ESP8266 chip and running on Tasmota alternative firmware. Linked to the controler using normal wifi AP. From Wall|----Sonoff-----Powerbar---: Led, Extraction Fan, Mouvement Fan, and the Rpi4 Software: Exploitation System: Custom Linux Buster Lite OpenHab : Open source domotic software for visualition and automation. Mosquito MQTT +TLS server : Used to publish and receive message/data from sensor etc. InfluxDB : DataBase for data retention Chronograph: Visualisation and transformation panel to analyse our data. Custom python code for running the sensor and publishing result into mqtt channel Chronograph have monitoring panel for now The growroom Sensor AkA spaceship The system sensor and hardware/computer monitoring : Memory, Disk space, CPU load and temperature. In/Out etc. Network etc The database: request per db ,memory heap, disk usage, http request etc. Working : Co2, humidty,temperature, Tvoc, Current,Voltage, Power, Daily/yesterday/Total energy consumption on kWh and $ Planned in version 1.0 : Mesuring plants height using ultrsonic sensor. Adding remote On/Off function on sensor using openhab. Adding power schedule in openhab. Adding basic automatic watering/dosing system, Planned In version 2: Adding relay and dimmer on the custom led to control/dim each cob. Adding custom small emerson effect led based on 3W led. Adding , automatic, PH, PPM and temperature monitoring for water/fertilizer. Adding PAR sensor for light monitoring. Adding soil moisture and PH sensor. ============================================ 2020-05-07 ============================================ Added security cam for streaming with rtsp, working on http conversion for addition in openhab Added snapshot. CO2 sensor down, some resoldering needed. =============================== ================================= 2020-05-08 =============================== Good: Updating fertilizer quantity from 250ml/day to 500ml. Watering planned for the end of the day. 2 days ago i've pinched the head of each plant Internode are booming. Started LST training s to help the lower internode. Bad: Noted some physiological/Nonparasitic leaf Roll on one plant ; humidify level is too low; Humidificator filter is broken, need to be replaced. Monitoring #4 for couples of days.
Likes
21
Share
Starting to ripen a lot this week and put on more size on the buds, she is getting near the end very happy with how she is going, swapped my light schedule back to 20/4 for last few weeks, Started giving her some PK also.
Likes
2
Share
Water soak for 18 sown in media. to
Likes
14
Share
Day 35. Minor defoliation and supercropped a few branches. Day 37. Starting to flower nicely, some frost Starting to appear on buds. Day 41. Strong smell of strawberry bubblegum when manipulating plant.
Likes
14
Share
Likes
Comments
Share
Likes
14
Share
D36/V32 - 06/05/23 - SCROG net added. Some LST D37/V33 - 07/05/23 - LST on SCROG D38/V34 - 08/05/23 - LST on SCROG D39/V35 - 09/05/23 - LST on SCROG D40/V36 - 10/05/23 - LST on SCROG D41/V37 - 11/05/23 - 👉 Water Change - Pure water for 2 days she's going to bloom D42/V38 - 12/05/23 - 👉 second day of flush
Likes
3
Share
Die Speed Queen purpelt ... und die Buds wachsen weiter - immer noch kein Dünger !
Likes
17
Share
Gracias al equipo de FastBuds y XpertNutrients sin ellos esto no sería posible 💐🍁 Ztrawberriez: Ganadora de la AAC 2024, con hasta un 25 % de THC, la Ztrawberriez Auto surge del cruce de dos variedades californianas conocidas por sus extraordinarios perfiles de terpenos y su potencia. Esta variedad no solo produce hasta 600 g/m² de hermosos cogollos duros como rocas en 9-10 semanas, sino que también llevará a tus papilas gustativas en un viaje en montaña rusa por toda la gama de terpenos dulces y afrutados 🚀 Consigue aqui tus semillas: https://2fast4buds.com/es/seeds/ztrawberriez-auto#description ⛽ XpertNutrients: es una empresa especializada en la producción y comercialización de fertilizantes líquidos 🍶y sustratos🐛, que garantizan los mejores resultados y cosechas de la más alta calidad. A través de una cuidadosa selección de materias primas y un proceso de producción avanzado, sus productos son sinónimo de resultados confiables. 🛒 Consigue aqui tus fertilizantes: https://xpertnutrients.com/es/sobre-nosotros/#:~:text=Xpert%20Nutrients%20es%20una%20empresa,de%20la%20m%C3%A1s%20alta%20calidad. 📆 Semana 2: Esta remesa va algo mejor que la de la semana anterior ya que la temperaturas van siendo algo mas elevadas 🌞🌡️. 🌱 sigue con la luz del sol + 12 horas de luz artificial con el Marshydro TS-3000, el frio y la baja humedad dificulta su crecimiento, en los próximos dias ira a su lugar definitivo en medio de algun lugar donde mostrará todo su potencial 🚀😎.
Likes
22
Share
@GreenISR
Follow
Flashing time ~~ Mid week did a hair cut to the plant . That smell is so lemon🤩🤩😍 So there is nothing much to say except my vent take a brake for a night and i have look at termo and it said 99 humidity ⛔⛔ omg the tent was sweaty ,long story short big problen with fast fix .
Likes
50
Share
Room setup rundown, examples of bud, et al in pictures... Seedlings/Clones lights - Viparspectra XS1500. Vege lights - Mars Hydro FC-4800 Flower Lights - 650w 3400K 1900umol/s PAR, (3) 226w DIY 2900K 630umol/s PAR (678w and 1890umol/s), Substrate - 50/50 sphagnum peat moss and vermiculite in 5-gallon pots Climate Control - Luckily, the lights, winter and normal furnace use all equate to a decent temperature, though a bit on colder side in in vege phase, sadly. Humidifier is needed early and later a dehumidifier is needed when canopy develops. I only grow in the winter months. Irrigation - do not use the emitters in this diary. They suck a big fat dick to skip a line to suck a bigger dick. Use the pressure compensating type. https://growdiaries.com/diaries/232811-strawberry-cookies-og-r1-cherry-diesel-bbgs-ego-epg-ebg-grow-journal-by-001100010010011110/week/1366923 -- use something similar to those. They come in different shapes, too. Basic process The little light takes care of seedlings in 2.5" wide seedling pots until first up-pot. The 1-gallon pots fit well under the FC4800 in a 4x4 tent until day 21 after sprout. I plant 150% or more of what i need, so i can kill the weak without concern. The goal is for every plant that makes it to the 5-gallon up-pot being capable of producing a minimum of 160 grams with a maximum of a 35-40 day vegetative phase. Third up-pot is into 5-gallon nursery pots and now under the 3 DIY lights and the 650W light in the big tent for a couple more weeks of vege. An irrigation system in the big tent saves a lot of time. One scrog for training and another for support, just in case. Reverting back to a more systematic approach to canopy composition moving forward. About 2.3 colas per sq ft and 8 primary colas per plant. Yields were similar when over-crowding and being less systematic, but the proportion of less dense nugs is greater and trim time is needlessly elevated because of that fact. I was very controlling about this the first couple years but got away from it for far too long at this point. Drying / Curing - Into mesh racks for 9 days. I wet trim and cut down to similarly sized buds for even drying. Temps are controlled around 68F and RH is set to 60%. Then into some 5-gallon buckets with gamma seal lids and (3) 2-way 67g boveda humidipaks (58% or 62%) in each bucket - 1 at bottom, 2 at top. Temp/RH probe confirms that they hold the RH steady at 60-63%. Cost - 0.33 cents (USD) per gram produced. This includes an accelerated depreciation expense for all equipment used, fertilizer, water, electricity for all equipment used, new filters and other yearly purchases - bti, ph strips, sticky traps, etc. I'm a finance guy, so these numbers are comprehensively accurate and purposely err slightly on high side of cost. The only facet not included is the cost of my labor.
Likes
21
Share
@Bak2Blk
Follow
This will be the last week of veggie for the girls. I'll be switching them over this weekend to their flowering schedule. I noticed that some of the newer leaves on the top are lighter than the other leaves, they are yellowish. I added some calmag to their diet because I realized I'd never given them any. I'll be monitoring that to make sure it doesn't get worse. Overall... color me HAPPY heheheee 😃
Likes
5
Share
@Losweed
Follow
The plants react well to pk 13/14 !! We are in the seventh week and the flowers begin to grow !! The plants have very long sonnets and have on average 10 12 plantations!
Likes
3
Share
@SupaDank
Follow
Jan 23rd 2018 so makes it day 57 from seed. On transition nutes right now and will go into bloom nutes next week. She's growing real fast and with a short flowering time, she will be harvested by March 5th
Likes
31
Share
@Tweak
Follow
Got the screen on her late last week, now it’s a waiting game. She’s growing really fast for only being 5 weeks old. Let’s grow baby!