der größenunterschied ist mittlerweilde mehr als deutlich. nicht wundern, bei jedem gießen drehe ich den topf

Last big shot of orgatrex+bactrex done, now first watering and spraying with PK Booster Compost Tea (15g/L) + Orgatrex (5mL/L) +Bactrex (1g/L). 2 retarded plants seem to finally flower, so I removed all stunted leaves and I'll keep them on vegetation feeding with boom boom spray for the moment (one of them is huge, will have to move it out of the tent or cut it a bit). The 4 others are fine : there are 2 phenos (2 plants are small with big short buds and 2 others are tall with long thin buds). The "indica" phenotype is already smelling and covered with trichromes, the "sativa" one hasn't got smell nor trichrome yet. 2023/07/02 : stretch isn't done yet... 😅 #02 : 63,5 cm #03 - 44,5 cm #04 - 54,5 cm #05 - 42 cm #06 - 36 cm #08 - 35 cm 2023/07/07 : it's time to leave, big girl! #02 - 77 cm, go outdoor with zucchini and tomatoes in 3 gal smartpot 👋 #03 - 47,5 cm stretch almost done #04 - 57,5 cm stretch almost done #05 - 45,5 cm still stuck in preflowering, wtf? #06 - 36 cm stretch done #08 - 35 cm stretch done

This week Water+biosys tea

📅 16.04-21 (Flower Day 50 since 12/12) 📜 Addition of 175ml total care. Trhichome analysis: everything is transparent. ⚗️ 2.06 💦 5.99 🌊 55L 📏 📅 17.04-21 ( Flower Day 51 since 12/12) 📜 Set PH 6.10. Removed 40l. Addition of 35l in the tank at 4 p.m. Addition of 45l at 7pm. 10% of the leaves turn black ⚗️ 1.93 💦 6.14 🌊 75L 📏 📅 18.04-21 (Flower Day 52 since 12/12) 📜 10l emptying of the system. ⚗️ 1.9 💦 6.10 🌊 55L 📏 📅 19.04-21 (Flower Day 53 since 12/12) 📜 10l emptying of the system. 30% of the leaves turn black ⚗️ 1.86 💦 6.14 🌊 70L 📏 cm 📅 20.04-21 (Flower Day 54 since 12/12) 📜 10l emptying of the system. 40% of the leaves turn black ⚗️ 1.85 💦 6.10 🌊 60L 📏 cm 📅 21.04-21 (Flower Day 55 since 12/12) 📜 theoretical start end of flo - analysis of trichomes: wait and see flushing within 1 - 2 days. Set ph a 6.2 ⚗️ 1.85 💦 6.15 🌊 50L 📏 cm 📅 22.04-21 (Flower Day 56 since 12/12) 📜 👌 i fill 50 liter at 23h20 ⚗️ 1.83 💦 6.20 🌊 50L 📏 cm _____________________________________________________ 📅 Day - 📜 Note - ⚗️ EC -💦 PH -🌊 Water -📏 Height Equipment: Idrolab 12 bucks Chiller teco Hy500 weather controler with Co2 : PRO-LEAF BECC-B2 Bavagreen 720w Bavagreen 720w Bavagreen 240w Bavagreen 240w Nutrients and PH controller: PRO-LEAF PHEC-B2 Nutrients: Green House feeding - powder feeding hybrids | Powder feeding boost Extractor: primaklima PK250-1 PK250-L1 x2 System and roots care: Idrolab Total care

topping at the end of the week

Blue Dream Auto is growing great. I dud her first lst today and lst. Everything is looking great. Thank you Seedsman, and Medic Grow. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 https://www.seedsman.com/?a_aid=Mrsour420. This is my affiliate link to seedsman. Thank you Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g.

COMING SOON!! The tent and everything is all clean and sanitized 👍. Had some issues but now im Almost ready FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Day 20 of Flower Flowers already nice and frosty. Last of the Bat guano. Going to use Biocanna BioFlores. Going to hit her with 8ml/l and then 4ml/l after that. Very faint discoloring on a couple of leaves.

This was the girls 1st full week of flower. They have done great, lots of stretch, small buds starting to form, and lots of praying 🙏 They have been pretty easy so far, I hit the barrier for these girls with nutrients, burnt the tips a bit , despite that, they have shown no issues. Looking forward to these girls finishing (as always) but they have been lab tested by other home growers who hit 3-4% terpenes, and close to 29% thc

Day 22: Drain EC 3 feet high and risin'😅( average 3.3 to be exact...) dunno how much whatever-salt is building up in that pots, but it obviuosly doesn't bother the ladies. Dark green colour, very few 'claws', no signs of tipp-burn, new foliage appears in a juicy green and turns dark in an instant, leafs point upwards....... looks like they're happy😊. Planns for this week: - Install the scrog-net - Obsereve plants/soil ( when do i have to feed nutrients again?) otherwise there will be no changes...... Thoughts: These bushy babies will be kind of a challlenge to create this scrog the way i'm used to (basically bending the 4 main main colas to the corners of the tent, upper branches to the walls and spaces between the pants, lower branches to the very center). Now these ladies make so many branches, so close togehter and so equal in length, underneath huge fanleafs..... i'd love to have them in a 100 square meter canna-crib....but in a tent...????? I really hate doin' things without having them planned - but in this case i guess i will have to install the net, start weaving and see what's happening😯 Day 23 Let's keep it positive...... indoor-climate of 64% rh is perfect for my health💪😁!!! ......but in my tent it's killing the vpd😖. at a lousy 24 degrees C, i'm readin' about 60-64 % rh wich results in about 0.7 to 0.8 kPa.* More figures? Here come the crazyones👻!: pH 5.5; EC 4.2😨 but thats only drain from plant 3....... average was 6.1/3.6 The girls busy produce roots, shoots and leafs....... still very green, still not unhealthy.......few claws, no tipp-burn. Basically a comfortable place to be: It's not bad yet - no work but watering - and it can only get better!!!😁 *VPD issue solved: The sensor hung too close to a fanleaf - didn‘t expect this thing beeing so sensitive 😅. Day 24 Climbed new hights this morning: Plant 1 had an EC of 3.8 - the others didn't climb any higher than yesterday. So maybe we've reached the climax..... 😇 Visible growth now - so i installed the scrog-net and will start bending and weaving these days:-) Thoughts: Did beeing out of VPD-range for one day harm my plants? How exact can my sensor measure VPD? after a bit of research i found out: Whatever you buy for less than 200 bucks is far from beeing exact! Even professional sensors have a margin of about +/- 1% in relative humidity. Thermometers at least +/- 0.5 degrees C. This could give some a good guess of the actual VPD BUT: Leaf-temperature-offset is absolute key! Many of our trusted homegrow-equippment isn't even able to measure it (some offer default temp-offset) ....don't wanna go further here - but there's no way to achieve something like a precise VPD-measurement in homegrowing. So why caring for VPD? Even with those less accurate instruments, you may be able to keep your plants in something like a comfort-zone. Way better than only guessing 👆!!! In case i ran a much higher VPD than planned, yesterday (due to a missplaced sensor) , it will not harm or kill my plants. they might have had a bit of stress from dry air - but nothing to worry about! Day 24: Decreasing salt-levels in the drain - excepting plant 4, wich had an EC of 4.0 - so i guess i'm slowly draining exess-salts from top to bottom and might have collected some build-up. The girls seem to be quite okay. Root-growth is vigorous (there are thick, white roots penetrating through the pots, everywhere), the stems are relatively thin. removed the LST-lines. the Sc.r.o.g: only materiels needed, were a climbing-net for gardening (HDPE) cut to 90x90 for my 1x1 tent, 4 cable-ties and 2 meters of strong rubber-cord. Pre-installed the net with the cable-ties, then weaved the cord around the outter cords of the net, led it aroud the posts and pulled tight. Then brought the net into it's final position. Not as sturdy as with a wooden frame - but i had less than half the work and a bit of freedom to move things if necessary. Any shoot will now be put to the next outter square (relative to the center of each plant) as soon as can be held by the net, without harming the top. Once i moved all of the dominant colas to the next square, i'll have to take 10-15cm steps (vertical growth), to reach the next square. As soon as i have about 70 of my 81 squares filled, i'm going to flip to 12/12. Since i'm plannin' to have them full of sugar when flippin', i don't expect too much of a stretch. This way i hopefully have the longest and strongest shoots framing the shorter ones in the center - so the canopy shapes like a bowl, in order to achieve the most even light distribution possible. Day 25: The main colas visibly reached out for the light - but yet i only moved 1 single shoot to the next square. Girls look good, EC is dropping slowly, climate fine. CU tomorrow👋 day 26: on Track... nothing to worry about...... till day 28....... Due to high EC levels in the soil, i couldn't do much more than pour out some water and prepare the scrog this week. Next week i will have to do some weaving. If the nutrientlevels allow, i'll do some defoliation.

-It's been a hot week and plants are doing great. -All the plants have almost caught up to BC1 in height. -There's been little rain so they're getting more water, pretty much every 2nd or 3rd day with the hose and once a week with food. -Definitely going to have to wire up alot of the lower branches once flowering starts as quite a few seem to be starting to sag under their own weight. Might start soon to prevent any damage. -And the White Widow Auto Midget is still just growing

🤔🌿🌱🍃🌗🌞

Foram regadas no dia 11/07/2021, 3 plantas com um total de 5L . E.C 0,43. A R.Gorilla 2 foi regada com 1,5L e foi a primeira vez que foi alimentada. E.C 0,16 / pH 6.2 R.Juice - 2ml ; Bio Heaven - 1ml ; Activera - 0,5ml ; calmag - 0,2 ml ; Ansioso para ver os resultados do LST, na royal gorilla 2 ( a mais pequena ) irei fazer o lst mais cedo e tentar não dobrar tanto o caule junto ao solo para ver as diferenças. Será que fiz bem?

Durch mein ADHS sind die Beiträge leider etwas knapp geraten. Aber ich habe es geschafft mit der Medizin eine neue Arbeit zu finden.

***UPDATE**** 6/17/2022 I forgot to mention that I transplanted both Big Bud Auto Plants, well slightly transplanted. I started Big Bud #1 off in a 16 oz grow cup and #2 I started off in a peat moss pod. Initially I just put the entire cup/pod into a 5 gallon pot without removing them from the container they were in. After a few days, I thought to myself "won't that restrict root growth somewhat?" so I took #1 out of the grow cup and transplanted directly into the soil in a 5 gallon and #2 I cut the white netting from around the peat moss pod and planted that directly into the soil in a 3 gallon pot. ***Update end*** Week 3 went by well. I'll admit I'm at the point where I've "been there done that" I don't pay as much attention to them and kind of let them do what they do. I lst'd Big Bud Auto #1, she is the healthiest and most robust of the group currently. Big Bud Auto #2 is sort of a runt compared to it's sister. I believe it may have to do to the fact that I started it in a peat moss pod and placed the entire pod into the soil. Caramelicious 2nd generation #1 is a project of mine. One of my plants hermied on my last grow and pollinated itself. This is one of the seeds from that Hermie. I am curious to see if it hermies or is a female. Because after all isn't forcing a female to hermie and pollinate itself is how feminized seeds are made? Needless to say I got over 1000 seeds, so I'm hoping that they are feminized. White Widow #3 popped up with severe helmut head, I tried my best to pull it off without damaging the plant, but ended up ripping a small piece of the tip of the plant. It is really small rn but seems to be growing. I'm curious to see how it grows. Lastly but not least there has been no action with my lavender and my hot chili peppers. I fed my ladies their first nutrients today. General Hydroponics Flora 3 part series. I mixed 1/4 ml into 3 gallons of water and ph'd it to 6.6 and fed each 1 liter.

Checked the fast bud Cherry Cola and gorilla cookies in paper towel and it had a nice tap root so it went in to the the Ocean from Fox farm with the center using a starter seed CoCo mix. So now we have two seed planted with tap roots in soil with clear solo cup over the top with some spritzes of water in the cup to keep the humidity up over the seed until they pop through the soil.