Ok so this week I did a defoliation and a tigh down too the netting , I really was not planning on doing such a big defoliation but the leafs became thick and dense and there was almost no light penitration down too the lower branches of the plant , so she is opened right up now and the humidity and temperature has dropped loads and the air is moving alot better around the leaves and branches , I will not take anything more off her now , I have also added Cal mag too the nutrients for this week only , she is well into pre flower now but the stretch has not yet started so I figured it's no or never too defoliate and tigh them down , I am very happy with them so far and being new too all this it's all very exciting , Thanks for looking :)

This week I really cut the girl - so that she focused her strength only on the buds. Two more weeks and she could reap. 😉

I'm going to feed some high nitrogen fish emulsion, I feel like she's way too nitrogen deficient

So far, so good. Tops are fattening up slightly, stretch is well passed. The root ball in the reservoir is unreal. Figuring out feeding with this container is definitely a challenge. She's in full blown potassium and phosphorus deficiency status, but I've increased the dosage on fertilizer so I'm hoping to counteract that. It's already starting to work, I'm just timid about overdoing it.

🌱 Eternity Cup 2025 – Woche 6 Update 🔥 Unser Eternity Cup 2025 Grow, powered by Zamnesia & Plagron, geht in die nächste Runde! 🚀 Die Runtz Autoflowers unter der Evo 301 (Samsung Chips, 180W) zeigen jetzt deutliche Unterschiede – jede Pflanze entwickelt sich nach ihrem eigenen Tempo. 🌿 🔍 Setup & Entwicklung nach 6 Wochen: 🌿 #1 – 20L Topf, nicht getoppt, aber LST Diese Dame steht jetzt voll in der Blüte! 🌸 Dank des großen Topfes hat sie sich super entwickelt, schöne Buds setzen sich langsam an. Sie bleibt stabil und gesund – die LST-Methode zahlt sich aus! ✅ 🌿 #2 – 8L Topf, getoppt & LST Während die anderen zwei sich voll auf die Blüte konzentrieren, legt #2 nochmal ordentlich in die Breite zu! 📏 Das Topping und LST zeigen ihre Wirkung – die Pflanze bleibt kompakt, aber buschig. Die ersten Blütenansätze sind zu sehen, aber sie nimmt sich weiter etwas mehr Zeit. 🌱 🌿 #3 – 8L Topf, nicht getoppt, kein Training Genau wie #1 steht auch diese Pflanze voll in der Blüte! 🌸 Sie ist von Natur aus etwas höher gewachsen und beginnt jetzt, schöne Buds auszubilden. 🌱 Fazit nach Woche 6: Die ungetoppten #1 & #3 sind mitten in der Blüte, während #2 sich weiter in die Breite entwickelt und noch ein wenig hinterherhinkt. 🌱💪 Aber alle drei sind kerngesund, und es bleibt spannend zu sehen, ob sich das Wachstum von #2 am Ende durch höhere Buddichte auszahlt! ➡️ Wie wird sich der Blütenaufbau in den nächsten Wochen entwickeln? Bleibt #2 länger in der Vegi? Wir halten euch auf dem Laufenden! Stay tuned für Woche 7! 🔥 Update vom 25.02 die explodieren ich muss das Zelt wechseln maximal 1 Woche noch und sie kommen in das doppelt so große Zelt !!! Ich bin so Happy bitte schaut euch #1,#3 an das sind Autos #EternityCup2025 #Zamnesia #Plagron #GrowDiaries #RuntzAuto #Homegrow #CannabisCommunity

Early veg. Stage Do si dos og by Original Sensible Seeds day 23  lollipoped and stripped the ladys they slept for 36 hours to trigger the far red ... so my ladys are in flowering now still don't feed them with nutes its still enough in my soil .. starting with nutrients in about a week i think they only get some HyPro spray mix HyPro Generator and some HyPro Rootsstimulator 3 days in bloom, and 4 days after defoliation damn where do all these leaves come from 😂 but everything is going well, no defects or other problems to find that was it again Soil: Atami light mix & Plagron Grow Mix mixed! Temp: 25,5 °C Lights: 12/12 Humidity: 54% Ph : 6.0 Water: 1l 23°C CO²: No Mercy Tabs Tds/Ppm: 400 ec 0.8 Nutes by Hy-Pro Fertilizers ml on 1 liter... HyPro : Spraymix 5ml HyPro : Terra vegi & bloom 00ml HyPro : Rootstimulator 5ml HyPro : Generator 00 ml HyPro : Epic Bloom 00 ml Light distance: 24 inch=61cm dimmed to 60%= 600par 1x MarsHydro TS 3000 Air Van: 800m³ Prima Klima AKF : 800m³ can lite 4x 140mm controled Be Quiet pc vans 3 l water cooling airco Diamant... 3.3l humidifier 1.8l dehumidifier Humidity control: Inkbird IHC-200 Temp control cooler/heater: Inkbird ITC-308 My grow room is variable in size 120cmx120cm² Custom Grow space for sog 150cmx150cm for scrog   S.O.G. Sea of Green Thx to Original Sensible Seeds,  HyPro Fertilizers, BTB Grow Supplies, Mars Hydro as our exclusive sponsor of our group The High Community

This week has been all about shaping the plant. I’ve learned from last that the colas weren’t the same height, because I let the plant do it’s things with just a bit of training. Now I know what to look for so I’m trying my hardest. I top dressed this week with crab meal, Gaia green all purpose 4-4-4, insect frass, kelp meal, bone meal, azomite, and covered it with a healthy serving of worm castings (about an inch to 2 inches). All of which was sprinkled on all the chopped and dropped leaves/branches. I believe in adding biomass to soil, especially for an indoor growing who is money conscious. Doing that can help save me money going back to the store for more soil.

~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ ❤️💡🌱😽💨 It's been a good week! We're really hurting for calmag but we just placed another order, we hope it arrives before their color slides anymore.. all plants were overfed about 1.5 weeks ago (I blame my husband lol), they are still really dark in places with some clawing but are starting to bounce back.. the node spacing is fantastic, the Solux350 @75% is a ton of light, we raised another few inches until we get some more calmag in them..not too much else to report, thanks for dropping by and happy harvests everyone!! ❤️🌱💡 ⚡Hortibloom/Solux 350⚡ Specifications ⚙️: Diodes: Samsung LM281 Pro / Osram DR (1,440 total)💡 Driver: Inventronics 350 watt🔌 PPF: 1015 μmol/s ☢️ PPE: 2.9 µmol/j 〰️〰️ Lifespan: 50k+ hrs ⌛ Weight: 14.3lbs lbs (6.5kg) Veg Coverage: 5 x 5 ft 🌱 Flowering Coverage: 4 x 4 ft 🌼 -Uses an aluminum heatsink (no fan), quiet while operating 👂⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 -May be daisy-chained via RJ14 and managed from a single controller 💡~💡~💡~💡~💡 🌎 https://hortibloom.com/products/solux-350-led-grow-light ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_

Start woche 2 in flow. Jetzt geben sie richtig gas👌😋 Werd das nächstemal dünger auf flow umstellen.🤔 mal schaun..... Die vitalsten und saubersten stecklinge gibts wie immer hier bei ROOTS-FARMS. If you know you know.....tumi getestet

Doing ok. Hard to battle humidity even though I have dehu and ac running . It’s 25 degrees and raining outside. some botrytis is showing up. Already ordered some particulate filters for air recuperators. Botrytis spores are supposedly 4 microns large or more. These filters are supposed to catch particulates smaller than one micron. Lets see if it helps stop the grey mold fucking bullshit.

Green crack had a good week of growth but is still so tiny in comparison to the others. I bent her over to try and get some more bud arms happening. Gave her a flush and looking forward to the stretch and trying to get a decent smoke off it

My order is finally ready and it will arrive tomorrow! (3/9)

nous avons eu notre tente vivosun merci vivosun thank you vivosun

4ème semaine de floraison. Cette dame ce porte a merveille ☠️☠️💀 irrigation tous les 3 jours environ 6L, 12L/Semaine.

Really liked the growing the strain , smells were unreal and a nice smooth bit of smoke 💨 will be trying more sweet seeds strains

Week 2 : Colorado Cookies in Biotabs Biotabs are drying much quicker than the other pots because they're closer to the fan, so i'll tune the air control in by having the fan pointing upwards instead. They got watered with micro from my very own specialized micro , one tablespoon per L, aloe gel from my kitchen plant, and (regretfully) a bit of lemon juice to pH it. didnt realise the organic would be no match for the aloe pH wise, so i'm spraying 1ml of my very own amino concentrate directly on the soil , not on the plant. i do one spray in the morning one spray at night, for 10 days to try to get the pH normalised to 6 , the night time is just enough to mix one spray can of 250 ml with 1/4 ml of amino concentrate, and have some left over. i added maybe 160 ppm of aloe to the watering. I sprayed the leaves once or twice max with 1ml/L spray and 120 cal mag on day 5. VPD went from week one 0.6 to 0.8 to pretty stable at 1.0. got my laser thermometer in the mail, so that really helps ! very even phenos across the colorado cookies so far, three nodes, very straight, very hungry. they seem to be enjoying having the roots a bit too cold more than the others. in soil ppm went from 340 in week one to 420 in week 2 🚀

Everything went as good as it could the last week. I definitely realize now that the light was too much for them once they stretched up from the lack of knowledge using my light mover. I’m still trying to figure them out but I believe I have the rite combination now for speed and pause times, but sadly to late for this crop. My other tent just going into flower with the same setup will be run drastically differently this time for a lot of things to compensate for my intense 1000w HPS. I’ve grown massive Buds before under this light in smaller tents and I’ll be dam’d if I’m gonna let this light rail defeat me! Lol so we are gonna start flush now because we are just about 8 weeks in and although we do have a ton of bud in this tent and I would have like to push her a bit more, we are gonna take what we got and move on! Lol there are a lot of medium size buds absolutely everywhere, and solid. Even below the top screen, between the 2 screens every node has a solid bud sticking out. Still gonna be a nice yield I think all things considered. Ph pretty much stayed constant in the reservoir at 6.0 as well as the EC was sitting around 1.5 all week. Wish I could get my light up more but I’m having a hard time finding the attachment for my light rail mover to add a bar instead of ropes to suspend it. I can’t justify $100 to import it from USA though...lol so I’m gonna experiment with some other diy one once I get these girls cut down, dont wanna mess around above them and risk dropping the heavy light on my girls. That’s it for this week. Gonna start out flush in the next day or so and ill report back in a week or so! Cheers💨