Likes
15
Share
@38PLAN
Follow
Stiamo ancora raccogliendo,ancora nessuna pianta é morta,sto rimuovendo piano piano le cime più mature,così facendo evitiamo le cime popcorn e diamo il tempo alla pianta di riempire anche le cime inferiori,per adesso levando quella fumata e venduta siamo all'incirca sui 780g,però aspettiamo anche il nuovo stendino,alla fine del raccolto dovremmo arrivare a quasi 2 Kili con 7 piante e 6 vasi,con una media di 333g a pianta,ho pubblicato tutto quello che potevo,ogni procedimento,spero vi piaccia e mi seguiate
Likes
10
Share
Dia 49 desde cotiledon, realizamos primera poda apical. aplicamos tambien una vez por semana NPK, un riego con fertilizantes y otro sin. la semana que viene ya aplicaremos melaza tambien en el riego. y por otra mezcla los preventivos de insecticida y fungicida. También aplicamos tierra de diatomeas tanto arriba del sustrato como en las hojas! espolvoreamos y despues rociamos con agua, quedarán las hojas blancas 😝
Likes
8
Share
6️⃣6️⃣6️⃣****Week8 Bloom6****6️⃣6️⃣6️⃣ 12/4/24 Water20L+Agsil21 10ml+Bloom 150-160ml+Core 70ml PH 5.9 EC 2.5 Runoff Tray PH6 EC3.2 ⛺️ PH5.9 EC3.2 13/4/24 Water 30L+Agsil21 15ml+Bloom 230ml+Core 120ml PH5.9 EC2.5 Runoff Tray PH 6.1 EC 3.4 ⛺ PH 6 EC 5 14/4/24 Water 30L+Agsil21 15ml+Bloom 200ml+Core 100ml PH 5.9 EC 2.4 Runoff Tray PH 6.1 EC 3.6 ⛺️ PH 6 EC 5 15/4/24 Water 20L+Agsil21 10ml+Bloom150ml+Core 70ml +Calboron 10ml PH 5.9 EC 2.5 Runoff Tray EC 3.8 PH 6 ⛺️ EC 4 PH5.9 16/4/24 Water 30L+Agsil21 15ml+Bloom 230ml+Core 120 ml Runoff Tray PH 6.1 EC4 ⛺️ PH 5.8 EC4 17/4/24 Water 20L+Agsil21 10ml+Bloom 160ml+Core 95ml PH5.9 EC 2.5 Runoff Tray EC 3.6 PH 6.1 ⛺️ EC 4.2 PH 5.8 18/4/24 Water 28L+Agsil21 13ml+Bloom 180ml+Core110ml PH 6 EC2.5 Runoff Tray EC 3.5 PH 6 ⛺ EC 4.8 PH 5.6 (Flush with thrivegens)
Processing
Likes
10
Share
@GIJOSE
Follow
Most of the Clones are doing very well! There is two that I'm a little concerned about as you can see from the pictures they have a little bit of burn on them, I'm not sure if it's over spray or actual nutrient lockout. I am now leaving the top off for longer and longer periods of time to let the Clones get climatized to the environment. I hope everybody's grows are doing well. Cheers! -G.I.JOSE
Processing
Likes
2
Share
@Sundown
Follow
This lady is getting real big, i wish i had induce her to flower 1 week before, but shit happens :) HST to deal with it :P Never had a Blue Dream Pheno with so many sativa %, I'm sorry about the quality of pics and videos but my phone sucks, i promisse some good bud porn with better quality for the next weeks :p
Likes
6
Share
Alles ist super verlaufen und es gab keine Probleme. Die Royal Gorilla wachsen am schnellsten und sind sehr buschig.
Likes
38
Share
@Aedaone
Follow
This week started of good except for ph and iron. I'm phing feed and water to 6 but my naturally 7.6 ph water is raising ph. I've realized my water and organic soil don't have iron in them. It's keeping these from greening up properly. I do have blood meal in the soil but not enough. I'll be adding an iron supplement next week when it arrives. Until then I'm going to feed a little masses and blood meal with the ph water. I've had a difficult learning curve switching from coco and salts to organic and soil. #2 got topped on day 1. I'm going to clone this top so I'll have this plant for the future.
Likes
11
Share
Pow pow and welcome back 🙅‍♂️ Week3 of Flower starting today. Last week stretched those ladies very nice and now we can see that power is going to bud production 😍 Checked the stems and the highest one is reaching 45 inches tall itself. Absolutely delighted 😃 We are cutting Roots Excelurator and CalMag Extra from the regime as they will not need it anymore. I’m still struggling a lot with high humidity levels hitting 70-80% quite often - still, there is good exhaust system and lots of air movement with temperature between 21-26. For now completely no sign of Mold or bugs 🐜 🤞 Stay tuned and look for daily photo updates 🤘 Update Day4 (day 18 of flower) Buds starting to fill the whole tent everywhere I look 👀 Invested in RAM 10l dehumidifier and now both girls are in sweet point...second advantage - I’m getting back free 0ppm water 😍 Stay tuned!
Likes
4
Share
Very happy with the results for my first grow. Didn’t have any deficiencies. Only issue I ran into was some bugs. Ended up with white springtails but they didn’t affect anything.
Likes
17
Share
Welcome to another episode of Growfessor theatre, 4x8 edition! Week 3F, ladies are doing good. Added B-52 to the nute mix, LSD, Green Crack and Divine storm are hungry! Did some defoliation. Thanks for stopping by growfessors, tune in next time! 👽🌳💚
Likes
2
Share
This is definitely one of the slower growing autos I have run. 11 weeks after germination and the buds are only starting to fatten up now. AH#2 is looking like it could easy yield double her older sister! Let's hope the added molasses can help her get some fat nugs!
Likes
4
Share
@Drtomb
Follow
Week 4 now and on full out cruise control. Nothing to report as the plants are doing great. Replaced a carbon filter causing heat issues due to it being plugged.
Likes
21
Share
@Potgoblin
Follow
Hello Growers! Nice to finally join the club! 😁 This is a step by step of my very first attempt at growing from Start to Finish. It's something I've always wanted to do and I've researched a lot of over the years but now is the right time to give it a go as I have become a medical user of cannabis and the price just keeps going up!! 😂🤦‍♂️ So without going on too much let's get down to the nitty gritty... I Dropped the 1 seed into a glass of 5.8 PH water on 10/05/21 which I also dechlorinated, waited until she sank then placed her between two damp paper towels inside two plates in a warm, dark & humid spot (bucket) until the tap root showed and was about 1/4" long then she went straight Into media on 12/05/21. Day 1 - 15/05/21 - first two baby leaves open & lights on! Day 2 - 4L Humidifier added, seedling just under 3" tall ALREADY!!! So I've lowered the light from 23" to 15" to try and stop the stretching. Day 3 - 17/05/21 - Checked on my girl and she's the same height as yesterday so hopefully the stretching has stopped 🤞 I also built a T-bar diffuser for my humidifier using some 32mm PVC pipe and fittings (Photo Above) I'm hoping this will distribute the humidity more evenly so I can have the humidifier on less often, I'm getting puddles of condensation forming in the bottom of my tent which is annoying! 🌊🌊🌊 😂 I'm hoping it might save me a bit of deionised water as well? 🤔 Day 4 - The T-bar diffuser I installed on the humidifier is working well, The RH is staying up and so far no puddles! ⛲ 😂 I will get a more comprehensive reading of highs and lows over the next few days and get it dialled in the best I can. I also think that because there is a lot of red LED's in this Mars Hydro light that may also contributing to the stretch during my girls early stages of life. Thankfully she is looking great and the stretch is massively reduced now that The light is lower. 😁 Day 5 - 19/05/21 - So far So Good! 😊 The stretching has definitely stopped but I'm still worried about her getting so tall so fast!! So today I installed a small 6" fan in the corner of my tent to try and get her stem to thicken up a bit, this is set to run only when the humidifier is on otherwise it screws up my RH and Temperatures. I also plan to bury her an inch or two deeper when I re-pot 👍 apart from that she's doing great! 🙂 Day 6 - 20/05/21 - No major updates today she's just looking happy! 🙂 Today's Environment Readings: Max Out (Probe) - 24.2c Max In (LCD Screen) - 23.8c Max RH (LCD Screen) - 81% Min Out (Probe) - 18.8c Min In (LCD Screen) - 18.7 Min RH (LCD Screen) - 47% Day 7 - So that's week 1 done & It seems like I've gotten all my temps down now, 👍 she's no longer stretching, humidity and temperatures are staying where I want them and my little girl is looking healthy 😁 No nutrients for the first 7 - 10 days of her life just water 🚰 set to PH 5.8 and dechlorinated. Hardware 0.75 x 0.75 x 2.0m Bud Box Pro tent in White Telos 6 Pro 175w LED! 😁 4" TT pro fan for Extraction moves up to 187M2 & SMS Controler + temperature probe 3" Passive intake (made slightly larger than normal due to the small area and large fan, also covered to prevent pests) 6" clip on Ram fan placed next to intake Rhino Pro 100/300mm Carbon Filter 4" Black combi ducting which feeds outside 4L humidifier set to run intermittently via analogue timer to increase humidity in Seedling + Veg stage Agro lab Temperature and humidity sensor Media I decided to go with a soil media as all of the medicine I grow will be for myself so flavour, quality and terpenes mean more to me than weight 0.2L"ish" Seedling pots - 75% BioBizz light mix 25% Canna Coco Professional for added drainage I will only be re-potting once into 8L Fabric pots 75% BioBizz All Mix 25% Canna Coco Professional Nutrients Going to stick with the BioBizz range of organic liquid nutrients including Grow, Bloom, Root Juice, Cal-Mag, PH down & Top Max apart from using some Plant Magic Silicon, some Root it First Feed, some Neutralise to remove the chlorine and chloramine from my tap water & Flawless Flush at the end. (I have some more seeds en-route to be safe) Light Distance From Canopy - 120cm Temperatures - Lights On - 26.0C Temperatures - Lights Off -20.0C Relative Humidity - 75% - Lights On Relative Humidity - 60% Lights Off Current Light schedule - 18/6 I can't think of anything else to include in regards to specs but if I've missed anything off or if you have any questions or comments then get involved as I'd love some input and advice!!! In the Meantime everyone I'm going for a smoke!! Stay High, Stay Happy and keep Growing!!! PEACE!!!! ✌️ Potgoblin Quick edit...The 3 remaining pots will have some other vegetables in them for this run, Pear Drop Cherry Tomatoes and Sweet Peppers if anyone was wondering...
Likes
5
Share
Removed a pair of the larger leaves to allow for more light to hit the side branches. As the pics show I've introduced a couple of ladybugs to see if they can actually be used for pest control. They've survived but look quite passive.. Not sure there's enough for them to eat :-).
Likes
20
Share
Buenas noches familia, aquí ando fumando un plajo, actualizando esta farm cheese que no veáis cómo empieza a oler, bastante sana, acepta muy bien la alimentación , un fallo podría ser que me pidieron agua y hasta el día siguiente nanai, pero nada serio. Ph controlado en 6.2 la temperatura no sube nunca de 26 grados con el led de mars hydro y la humedad se mantiene por debajo de 50%. Todo va muy bien. Poco más que decir estoy deseando que pasen las semanas para cosechar, buenos humos fumetillas.
Likes
175
Share
as the second week of June is just on it's end and the weather has had it's ups and downs with a lot of rain and some nice sunny days the plants keep growing day by day. The tallest plant reached a height of 86 centimeters or 33.85 inch so i'm getting close to the 1 meter mark. But hopefully they will grow much bigger as they have plenty of time left. Last year i a grew Blue Dream and a Chocolope in pots which reached a total height of 1,38 meter, which both yielded 30 grams each. What i should mention about the plants from last year is that the seeds weren't bought but came out of a friends weed. So this year it was all out with premium seeds, more knowledge and experience, great soil and hopefully the best weather
Likes
5
Share
@LAShugars
Follow
Started giving her plain water ph’d to 6.0 a week ago. Took down her main cola the other day so I could lower the light. The trichomes looked good on it. It’s drying currently. Planning on harvesting her next week. Not sure you can tell the massiveness of her from the picture. This is a Mars Hydro 5x3 tent. She is a beast!!
Likes
13
Share
@B4niTa
Follow
Soon transplant, Milky run good 🌱🤗
Likes
6
Share
text to edit nbvnbvnbvnbvnbvnbvnvnbvnbvbbbbnjbmhgdhgshcnkbvfxvvb,nmmbvcxcvbncxcvbnbvcvbnmtext to edit nbvnbvnbvnbvnbvnbvnvnbvnbvbbbbnjbmhgdhgshcnkbvfxvvb,nmmbvcxcvbncxcvbnbvcvbnm