Plants came back out of their 36 hours of darkness and were a little droopy, so I made the decision to put them outside for the first day of light. Unfortunately they suffered from wind burn so I brought them back to the tent. Foliar fed the plants daily at 400PPM.

During the initial two weeks of growth, Bad Guy by UKHTA Genetics encountered suboptimal conditions marked by low humidity. This environment took a toll, causing some leaves to exhibit signs of dehydration, notably curling and drying at the edges and base. Despite these challenges, the strain showcased its resilience, pushing forward with steady growth. Regular monitoring and adjustments are crucial to ensure Bad Guy's health and maximize its potential as it navigates these less-than-ideal conditions.

Days 78-84 - Been lax in updates, but I still log every week to completion. Back injury in addition to The Nineteen, Rona Style, has been a bit of a pain in the posterior. (That means ass) Plants are gigantic and sassy. Had Dangergirl come out and defoliate/lollipop the bottoms out of the girls, saving me painful labor and increasing my yields, so yay for her! Plants are happy, pompoms are getting thick, and everything looks good. Switched FF01 to flower on day 84.

Just tucking away 🤣🤣🤣 Last weeks feeding was slightly too high for transition. I am realizing that the amount of fulvic/humid acid reduces the need for full strength ratios. This week we are going to feed 800 again, as the need for ppm’s has increased, but I am going to stay under 850 unless I see deficiency in leaves. The photosynthesis plus has been added to the mix. I know, I have recharge. However, there are certain strains in PP that recharge does not have. Specifically there is a strain for absorbing more from the lights. I have some purple stems from the light being a little to intense. We will be adding a little more cal-mag to the next feeding also. Looks like feeding will take place Tuesday/Wednesday this week. All plants are female and no Herms present for the party 😂😂 10-25 did a pre-feed of cal-mag, 8 oz. Later this evening I will do the main feeding 3 cups. The ratios are still 8-8-8 at 800 ppm’s. The extra ppm’s come in the form of extra cal-mag. Did some tucking as I am in stretch phase. So I work with a grower who is 76 years old. He has some old school techniques that make sense. He pre-waters his containers with 25% water. The remainder 75% is either nutrients OR additives that need to be added to the water. I took it a step further. I added cal-mag to the pre-water stage. Then I fed the nutrients second stage. Cal-mag is the “carrier” for nutrients throughout the plant. “Adding the nutrients after, makes it easy for the nutrients to fully saturate the soil and reach all the roots. This also prevents salt build up.” Ron’s Words. I will say my containers held double the amount of water using his method. 10-28 added some reflective material around the sides. My Growmie at RedmanFarms suggested I add it to the room. I am inside of an open air room for flowering cycle. Today was watering day. First watering was a light dose of cal/mag. Second watering was kelp, seaweed, photosynthesis plus, monk beans SST, fulvic/humic acid. One of the plants ( top left) seems to have a sulpher/magnesium deficiency ( it’s also the one with the soil I don’t like). I made some Iron/Tone tea by Espoma at 200 ppm’s and did a foliar feed. So far I see some progress on purple recessing and the growth has started to match the other 4. I have 1 more week of tucking to do and then I do a HEAVY defoliation on day 21. After than I won’t touch the plants other than feedings and water.

La purple haze était vraiment plaisante à cultiver. Une des deux a eu un problème dès le début de croissance, et malgré tout, j'ai réussi à l'envoyer en floraison. Cela montre bien que les variétés de zamnesia sont très bien pour les débutants, elles sont très résistantes. La haze était de taille moyenne. Une odeur très épicée et terreuse, un vrai plaisir au nez. On voit bien que c'est une sativa, elle provoque de grosses crises de fou rire, la première fois que j'ai tiré dessus j'ai tiré trois taf et j'ai rigolé pendant 30 minutes, complètement incroyable. Très cérébrale, pleins d'idées qui nous passent par la tête, elle rend très énergique et n'a pas d'effet de détente sur le corps. Ne pas fumer en soirée avant d'aller dormir, plutôt en après-midi, j'ai beaucoup de mal à dormir si je l'utilise en début de soirée. Attention tout de même, elle provoque pas mal de parano je trouve, typique d'une sativa. En tout cas excellente variété pour aller marcher et profiter d'une belle après-midi. J'ai optenu 45g et 30g en sachant que j'ai eu pas mal de problèmes.

Fun one to grow even in veg its exciting because the foliage is fuckin Jurassic like it's a beautiful thing. Had some high ph towards the end so I would say theres plenty of room for improvement but all around this was a decent grow and this strain is a classic

FLOWERING IS UPON US for all of the strains I wanted to let the 2 purple berry Kush veg for another week but forgot to put them under the TS-1000 but hopefully there still gone grow fine it is experiment achter all. Have made the switch for 12/12 couple day's ago and i see them all developing 😍 hopefully by the end of next week it will get interesting 👌🏻 visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter

Nice growth in vegetative stage considering I'm using a hps lamp.. Starting to branch out nicely after topping after the 5th node.. Cut the first branches off at the first true leaves so left 8 main growth points.. First round of lst completed, just using wire to flatten out the branches.. defoliated the main stem of all the shade leaves.. Will adjust again as the plants go into preflower.. Will also keep trimming off all the lower branching as I want all the energy going in to 8 buds per plant.. some of those trimmed branches will become clones as the next round I will be running SOG and growing 16 plants in 11L pots.. Happy growing..

Good week this plants going steady about 3 n a bit weeks more than four but that's OK giving an update anyway plant going good nice and easy going once I've controlled temps being winter and all plus controlling nutes a bit more this plant seems to need more trace elements good learning loving it.

This week marks the end for this beautiful Blueberry what an amazing journey! The buds turned out dense, frosty, and full of deep purple and blue shades, covered in a crazy amount of trichomes that glisten under the light. Most of the trichomes are now milky with around 10–15% amber, just perfect for a balanced and smooth high. The aroma is absolutely delicious strong blueberry sweetness mixed with creamy and earthy tones, getting more intense every single day. During the last week I gave only plain water for the final flush, and the plant faded nicely with beautiful yellow and purple contrasts on the leaves. The structure stayed compact with heavy colas and almost no fluff, showing excellent density for an auto. Harvested at the peak moment for both potency and flavor. Can’t wait to taste it after the dry and cure it’s definitely one of my most beautiful and aromatic plants so far! Made bubble hash from Blueberry trims. Final yield: 6.5 g recovered from the 72 µm and 25 µm bags combined. Steps (what I did): 1. Collected trims gathered all the trimmed material from the Blueberry plants and prepared it for processing. 2. Prepared frozen material chilled/froze the trims so they were ready for the wash. 3. Agitated in ice water agitated the frozen trims in ice water to separate the resin from the plant material. 4. Filtered through bubble bags ran the wash through a set of bubble bags, including the 72 µm and 25 µm bags, to separate the different grades. 5. Recovered resin collected the resin that accumulated in the 72 µm and 25 µm bags. 6. Pressed & dried pressed the collected resin into a ball and dried/allowed it to cure until stable. 7. Weighed final product after drying/curing, weighed the final product: 6.5 g total from the 72 µm + 25 µm fractions. Notes / Observations: • The final texture was [insert your texture e.g., sticky, sandy, crumbly] and the colour was [insert colour e.g., light blond / amber / dark]. • Yield came only from the 72 µm and 25 µm bags; other bag fractions produced negligible amounts this run. Harvested the Blueberry at perfect maturity cloudy trichomes, strong berry terpene profile and very dense flowers. Drying was slow and controlled, keeping the room at 60% RH / ~18°C for optimal preservation of cannabinoids and volatiles. After trimming the buds, I collected all the sugar leaves and small popcorn buds to run a full bubble hash wash using my 5-bag set (220 / 160 / 120 / 73 / 25 μm). I followed a cold wash method using ice + reverse osmosis water, keeping everything near 0–2°C. Gentle agitation only — no beating the material. Yields: • 72–73 μm: main grade — golden, oily, perfect melt • 25 μm: clean sandy resin, great for rosin pressing Total hash yield from this plant: 7 grams. The 73 μm fraction was pressed by hand into a sticky, elastic temple ball and has been curing at 16°C / 55% RH for slow maturation. The smoke from the flowers is incredibly smooth, with a classic Blueberry profile — sweet, creamy, slightly earthy with a berry exhale. Very relaxing and euphoric high, ideal for evening use. Overall, one of my most enjoyable runs so far.

Planted germinated seed on 6/6. The girl on the right came out first, followed by middle, then left by mid-week. By end of week, each stood about 3". Sporadic light watering throughout the week with a dropper at the base of the sprout, spritzed the soil surface and inside of humidity domes which were placed over pots periodically. Only the two 150w COBs are switched on, the 100w QB is off to protect the babies.

👋🏼💚 so we have spent all morning doing low stress training on our girls good old benders and pipe cleaners 👌🏼 all opened up and looking beautiful 🤩 4 weeks +1 day old. under the marshydro FCE 3000’s being fed plantmagic nutrients the silicon is doing wonders so soft and bendy 🔥👏🏼 Tent size is 4x4. Thanks @ the_green_team_2020

Hi all just finished another week having trouble with humidity since fan went marshydro said they out of stock but will send me a new one the minute they have it in which is a month haha 😄 all be harvest by then hopefully god help neighbours that's all I can say haha bought a new dehumidifier off amazon a shit cheap one not even making a difference at all haha so today splashed out a 100 euro for one so hopefully that'll do the job. other than all looking good I think. But actually if someone could tell me will I defoliate more leaves she very bush bit I'm afraid of disturbing flower so im leaf tucking but she is very bushy haha. also im looking at other diarys on this and my plants buds not as big or as far along as many im on 9 weeks on the dot at the moment if anyone with more knowledge please let me know. Anyway i lowered light again and up nuts a little bit and on we go one week closer to be stoned hopefully Enjoy all thanks for stopping to have a look and for comments +help. keep growing and blazing.

TUESDAY 7/23: The FIM'ing seems to have only doubled her main, but that's okay. She's going from Hawaii conditions to Arizona conditions every day...8-10 hour of 72f/70+%RH to 12-14 hours of 96f/35%RH and taking it like a champ. I foliar fed her after taking her outside today and started training her a little bit. Gonna try to get those tiny lower branches to think they have a shot at "primary cola" status. I had no wire with me, so I just used a pliable length of dead-ish vine that was lying on the ground. I'll use some wire and binder clips when I can find it.. Evening...same day: She broke the vine I was using to hold her down, so I dug around and found some clips and wire. WEDNESDAY: She was just about 4 inches beneath 120w of LED last night with tons of blue spectra, 69f temperature and 80% RH. Those lower branches gained another half inch each and the top colas have turned to face the sun. I foliar fed her and gave her a little douche of Bactrex this morning when I took her outside. Had a cool front come through today, so the high will just be 87f and it's dropping to the mid to low 60's tonight..hooray! They're forecasting another day or two like this before the return to "oven-like" conditions.👍 I carried my pole saw down to the site at daybreak and removed a few smaller branches above them and to the West. I'll see if it is allowing some evening sun to reach her when I go down there to fetch her home to the LED's for the evening. THURSDAY: I was somewhat successful with getting a little bit more direct sunlight to her while outside during the day..about another 20-25 extra minutes. She got a sip of compost tea today with a little kelp me kelp you and big bloom. I tweaked her indoor domain a bit..she's now got 2 x 12w Miracle LED veg bulbs (cool white with 475nm peak), 1 x 75w cool white/460nm 225LED panel, 1 x 40w Sansi daylight grow bulb, 1 x 50w 460nm/cool white flood, and 1 x 18w 18" pinkish grow light bar. None of the lights are more than 5 inches from her, so she's incredibly well lit. I'm estimating that it's about 5,000 micromoles an hour, but I'm keeping the temp at her canopy under 80f with 90+% RH. It's not direct sunlight, but I think she's happy. I'm still undecided as to whether I'll keep her on a 24/0 schedule or if I'll cut it back to 20/4 when she starts flowering. Since I can provide her with a cool and humid environment for a third of the day, I'm leaning towards running 24/0 the whole grow. FRIDAY: I accidentally burnt her up a little bit today..one of the overhead LED's slipped and was about an inch from her top leaves...oops..I put her outside and misted her with some boom boom spray and kelp me kelp you.. SATURDAY: She's got a few crispy leaves, but she perked up and is growing again...whew...😓 SUNDAY: I tweaked her indoor environment today. She's now got a 120w quantum board (3500k) overhead, a 24w panel with 225 x 660nm red LEDs, the 40w Sansi light, one 9w 2' bar grow light, and one 12w Miracle LED blue.

Turned light to 12/12 start week 6 day 35. Defoliated the central cola's to allow the sides to catch up. She's stretching fast at the moment. I'll start feeding her from week 7