Tuesday the 20th of June day 55 of 12/12 the buds have got really dense in the last couple of weeks and swelling up I plan to harvest between day 60 and 65 gonna check the thrics tomorrow and see how gbey are looking smelling so good, looking forward to see what kind of weight I got on this run seems to be getting better each time so hopefully I pass 116g let me know what yous think 🍁😎

my dry and cure style is this: 4 days of hanging upside down to get water activity lower to around 0.6 in 50% humidity and 26 C temp (i know its a little high but we are in a hot summer right now and i cant get it lower even with air conditioner) and then after 4 days of drying i remove leaves and stalks, trim buds and move them to jar for the rest of their life :D . and in the first 4 days of curing i open the jar door and let hem get some fresh air in the jar for about 5 minutes and close the jar door again, after 4 days of curing like that buds are smokable but they will get better as they getting cured about 1 month. buds are one of the hardest as fucking rocks type of buds! very dense , compact , sticky , smelly , amazing at every aspect growing stage was 56 days and flowering stage was 75 days total (harvested tops at day 64th) the total weight of dry buds was : (plant #1 & #3 top buds 56 G + lower buds 22 G ) 78 G + (plant #2 top buds 47 G + lower buds 18 G ) 55 G + (plant #4 top buds 120 G + lower buds 67 G ) 187 G = 367 G

They are in solo cups after the peroxide soak. I've got babies!!!

Domenica 30 giugno Aggiungo 50 lt acqua e nutrienti perché impianto a secco e piante mosce, ottengo 1640 ec ph 6.5 Lunedì 1/07/2024 aggiungo la rete scrog per supporto apicali Mercoledì 3 luglio Aggiungo altri 50 lt con o nutrienti Sabato 6 luglio Aggiungo 50 lt acqua per livello basso Stanno bevendo un sacco!!!

signs of plant feeding errors appeared, but generally within normal limits i think. the bumps get fat. and they seem very tasty.

78 dias de vida hace dos semanas que empezaron la floración la 1051 esta mucho mas avanzada que sus hermanas han sacado un lado genetico más sativo y van a tardar mucho mas en cogollar en general esta todo bien, ha sido temporada de lluvias, tormentas y hay una humedad constante el clima no ayuda, en el mediterraneo siempre en final de temporada vienen lluvias y hay que pelear con el tiempo para poder sacar buenos resultados y evitar plagas

3 stardawg plants under 600w led not yet weighed up will update.... when cured

Both grew very well. Not a single problem

Hello friends of growdiaries. As you can see, the difference between the two plants is enormous. It must be a question of seed genetics. flowering advances. See you soon

Looking allot better this week! Going to keep the ph a little hogher tward 6.4 also finally got all the males out and everything sexed so i am ready for transplant! I have 6 females from each of the 12 seeds popped from each strain! Great ratio Still have a pretty bad knat infestation after a couple of sprays and i also read neem oil negatively affects microbes in the soil so im going to swich back to grow safe a brand i have used before and i know will work in 2-3 sprays max

DAY 35

Week 5 - Day 2 - 11.12.2017 - Hay lovers of Green, i will give you a big update. While trying to fix the PH and Humidity issues last week, i've already found some nice root developments and decided to transplant to support the regeneration - 6.12.2017 -. The Plants were unhealthy and shocked. After 2 Days they started to reviltalize and stable - 08.12.2017 - and i found a suprise, the adjoining Auto Dinamex's start to Preflower. - Today the sweetys are healthy,vital,bushy and got nice stems, in height arround 18 cm The BCC'S internod distances are longer and the stems are thinner as the ICED G's. - ■ Blueberry Cheesecake [ Cheese x Blueberry Multiple Hybrid ] ■ ICED Grapefruit [ ICE [Skunk Special x White Widow x Blueberry] X Grapefruit [ C99 x Cinderella x Sativa ] - ■ Timeline ■ Germination start [ 04.11.2017 - 17:15] Germinated / into Coir Pellets [ 06.11.2017 ] PreVegetative start [ 07.11.2017 ] Transplanted into 1L Airpots [ 19.11.2017 ] Vegetative start [ 26.11.2017 ] Transplanted into 7L TeKu [ 06.12.2017 ] - PreFlowering start [ xx.xx.xxxx ] - Flowering start [ xx.xx.xxxx ] Harvesting Part 1 [ xx.xx.xxxx ] Harvesting Part 2 [ xx.xx.xxxx ] - ■ Growroom ■ Size » 90x90x170 ~ 0,8 m² - PreVegetative Lightning » 24 ▪️ LED ~ 33W - daylight - 3700lm Vegetative Lightning » 24 - 20/4 ▪️ HID ~ 250W - 5600K - 18.000lm Flowering Lightning » 12/12 ▪️ HID ~ 400W - 2100K - 56.500lm - Supply air ▪️ mesh window - negative pressure Exhaust air fan ~ max.420m³/h ] Circulating air fans ~ 3x16W max.2250 rpm - Pots ▪️ Coir Pellets --> 1 L Airpots --> 7 Liter TeKu. Medium ▪️ Organic Soils! Composition ▪️ bark humus,wood fibers,coconut fibers,coconut husks,compost,guano,hornmeal,clay minerals,trace elements,calcium carbonate,perlite. - ■ Supported by ■ » Female Seeds - so easy ! » Cellmax - Organic Growing. ////////////////////////////////////////////////////////////////// 👋 Greetings your organically » tried and true, since simple is the best! 👍

*ADVISE NEEDED* The day before yesterday I discovered a huge error in my system. I placed filter material in the feed-throughs of the breeding boxes. This is to prevent the roots from growing together over time. However, what I caused with that is very difficult to explain. The bottom line is that the distribution of food and circulation was actually not good at all. This also explained the differences in the water temperature, but also PH and EC values. That is now completely under control because it now runs stably for 2 days. However, you can see that the records have had a bad start. I am thinking about starting over. Week 3. Week 2 was looking for the correct settings for my system. I found out that the temperature in the bins is quite different. When I set the water chiller to 19 degrees, it all flows fine into the first container. There it rises about 0.5 degrees per bin. The margin of the chiller is about 1 degrees, causing too many fluctuations in the system, with tray 1 becoming too cold and the last one too cold. I solved this by shielding the box at the inlet of the tent with heat-protective foil. I also put a fan on the water chiller. If that catches on, the entire loft heats up, whith more fluctiations. However, I have enough space to measure very precisely and I am getting more and more control. I think the brown leaves were the cause of much too hot water. Since I have the water temperature under control, I see that the new leaves are growing nicely. Moreover, since yesterday (13-5) I received the nutrition. 10 days late. I just finish the root scheme I think. That is still 3 days a 70 mm per day combined with BioBizz Heaven. I tried to take some pictures of the roots and some close ups. I hold the lid with my left hand and with my right hand I try to take a picture zoomed in (max). While the wind makes the roots dance past my lens😵 Something different than usual ... Hope you like it. If you see something that needs to be addressed, let us know. It is my first breeding so there will undoubtedly go wrong. This week I also connected the water reservoir with which I can flush the entire system at once. With this I also control the Ph in the system. Will post photos soon.

What up Fam. These girls are growing amazing. Now that I can controll the temps a little better they've taken off with growth. Starting the flower period which we all no know what that means. The countdown is on. Over all Happy Growing.

we are getting to week 3 on day 18 and 15 , the two rooms have 1 plants for each strain . we have 150 watts room and a 250 Watts room, and we are getting the led pannels to test the Genetics of our sponsors on 3 different grow rooms. follow us also in Instagram, YouTube, Twitter,etc

My first time cloning I think I got it .. I’m a hands on kinda guy. If I can learn it I’ll do it.. super excited this strain is ⛽️

Hello fellas! 😍 Girls are really happy and i can see 😇 colours are amazing, as always I am lucky enough to see all the nuances of the genotype with 3 plants at time 🙏 Buds don't stop maturing, so i decide to going on with nutrients..i had planned to harvest later this week, but let's see thricome and decide day by day..at last i will do hard flush with Advanced Flawless Finish, in the hope of not going further with maturarion..pray with me 😅 what do you think about?any suggestion? Have green dreams, Omisan