I started flushing tham a few days ago, gonna let em go one more week before I harvest. This grow has gone on alot longer than I expected it would and I'm ready to smoke these bad girls already lol.

this one seems to be keeping up with the others pretty well, wish it had produced some larger leaves prior to flip but oh well

March 11: start of day 8

This week was absolutely torturous had an accident in which one of my plants was damaged fortunately I do not believe that all is lost I will just have to hold her back on sending her into flour with the rest until she is completely healthy I have sent one into flower a bit early just to see if I could and seems to be working swimmingly

Oh boy, what a week have they got Sick PH was very high. Didn’t know what to do so the last week and a half. I’ve been flushing them bringing the pH down little by little trying to go gentle eventually the last flash show PH at 6.8. Which is OK anything between six and seven is considered optimal range for cannabis plant.

The girls have been very busy making golf balls this week! The cookies are also starting to frost up 🤗 At the beginning of the week there was not much to do, the girls had stopped stretching and were settled in. In my 2x4 tent, all I had to do was tuck fold the leaves to open up the bud sites. I basically did the same for my big tent. Simply moved some leaves from blocking sites, and plucked just a few that were rather large. They are still needing to be watered every 72 hours or so. I have been keeping to a feed, water, feed schedule now that we are into flower. I just started to notice that some of the tops are showing some nutrient burn, just a little, and not every plant. This tells me I have hit their limit with the nutrients, somewhere between 700 and 750 ppm. The last watering I did, I watered to about 10% runoff, trying to make sure that there are no salt or mineral buildup that can cause lockout or other issues. At the end of the week, day 21, I defoliated both tents, not too much, but enough to open up the bottom growth a bit. Also tidied up the lower portion below the trellis, as this just wastes energy and yield from the main colas in the long run. No real issues or problems so far, Happy Gardening Folks! 🇨🇦👊❤️😎💨

Day 85 Day 50 Flower Friday 17/05/24 She seems to have exploded since I sorted the temps. The tops seem to be swelling again normally, fox tailed to shit at very tops but all under are nice and swelling up more. Last Feed today. Day 87 Day 52 Flower 19/05/24 - Sunday. Water today with calmag She really has recovered well, that 1 week of stress really did her dirty for tox tailing. But, she has recovered and now has fist sized nuggets forming everywhere. She is a beast 💪💚 Day 89 Day 54 Flower - pH water , 5l 2.2l run off. Day 90 Day 55 flower 22/05/24 - Wednesday So I'm debating, chopping her at end of this week, or trying to allow another week just to ripen further, all depends on my tre lime auto for space. She looks ready, all trichomes cloudy with tiny partial amber's showing. I would love to see more amber as I like my smokes to be sleepers.

Pheno #7 and #4 showed the most desired traits and will be running both indoors iagain the coming weeks under better conditions. I didnt get as much photo's as promised but things have been hectic on all fronts, but I will do better next time ;) Its a pitty we had some issues and not all phenos where in a position to show the true potentail. There for we are running the 5 with re-running outdoors this season. Along with some new beans :D

Haven’t started any training yet might just let them grow, forgot to update last week, huge growth one is doing extra ordinary!

LST, and Super cropping. Plan on letting them grow vertically for all of week 5. Ordered a 3x3 veg tent that will use this old 600 watt HID for now while the 4x4 will use my new SE 7000. Should be a massive upgrade. As soon as my new equipment gets here I will likely take 3 or 4 clones, so I can start filling up my veg tent.

After 12 weeks of flowering and an incredible fragrance, I cut off the larger top blooms. The smaller ones that were covered will be given another 1-2 weeks to ripen. Incredibly beautiful colors, pink-purple-green colored flowers The larger fan leaves were quickly cut off. The scissors were covered in purple resin. The wet flowers were carefully sorted into the drying net. Now they can be dried in the dark at 19°C and a humidity of 50-55%

420FASTBUDS FBT2105 WEEK 5 The 2 of these little beast are growing great and are some show stoppers. At 3 weeks since sprout they are decent height with fan leafs already starting to get large. I've fed up to this point just ph'd water so I have a molasses tea brewing. I will gove them both a good feeding after its been aerated for 48-72hrs or a nice frothy top. Absolutely no signs of nute burn so I have a feeling they wont even skip a beat. All in all I hope they continue to grow the way they have been. Very easy going so far. Temps been in the mid 70's with 30% humidity. Happy Growing

So the objective here is to get to harvest as quickly as possibly - Basically got a cheap humidifier and filled it with ph'd water with very little nutrient. Running this as a Fogponics once the roots starts coming out the net pot and then move to standard dwc with air pump during veg and flower. Let see if this speeds things up

Great performance so far, few fox tails but I have reduced light intensity and increased air flow so have seen an improvement. Lots of white hairs for flowering still, looks like it will be a big plant and a good growth. Looking forward to see next week's growth!

https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA MY SAYING NOW IS: THE ONLY WAY TO GROW IS WITH THE HYDRO🤘 AND THEY WILL REACH FOR THE STARS WITH MARS🤘🤣. So it's been almost a week under the new MARS HYDRO FC4800 and the girls are loving it.. leaves were straight up like they were at a rock concert just blowing in the wind waving their arms like they are in the moshpit🤣🤣 looked so sweet👍. after a day they have stretched so much I had to raise the light already to keep it at 14 inches above the canopy. Plants grow so uniform under these lights, canopy is always nice and even👍. it has a whiter light than the mars tsw2000. Being side by side in my 8x8 tent, I can really see the difference in the color of light. The FC4800 is more of a white light like natural light. I think it might be the blue uv Diodes they added to the fc series lights. I'm amazed at how good this light is already. Barely any heat comes off it. I can rest my hand on it when the dimmer is at 100% and it's just warm. I have it daisy chained to my TSW2000 and it works awesome👍 and I dont have to reach for the other dimmer to do both. One dimmer controls both lights. When I add more lights I will daisy chain them too and control 4 lights from 1 dimmer👍. I still love my tsw2000. It's been going almost non stop since I got it and no issues at all. I take a picture of the Diodes to see if any have burnt out or anything, everything is fine.  same thing with the heat it gives off is just like the FC4800. I can rest my hand on it without burning me👍. Having both lights on 100% because I in flower now, only raises my temperature about 3°celcius. Make sure you got some calmag and if you use reverse osmosis water (bottled water) or filtered water you will want extra calmag because it's filtered out of it👍. These lights are perfect for every stage of growth for germination to flower. Just use the dimmers to reduce the intensity of the lights for whatever stage you are in. Plus they are easy to raise and lower them with the ratchet straps. MARS HYDRO'S recommended height for different stages is pretty accurate but different strains like different Temps and light sensitivity so that's something to look into, a more Mediterranean strain can take more heat and intense lighting. and you can just follow their recommendations for the height for each stage. I slowly turn it up in the later veg cycle until I'm at 75% about a week before I switch to 12/12 and after about 4 or 5 days into flower I'm at 100% with no heat or light stress👍. Mars hydro is awesome for their pricing for what you get👍. They should cost alot more than other brands but shhhhh don't tell them🤣🤣🤣🤣. Just kidding. they want to stay competitive with every brand but there stuff is always cheaper than SF and vipar etc. They know once you use mars hydro products you won't switch to another brand. Why pay more money for something that isn't as good. I've seen lights cheaper than mars but they are cheaper for a reason. They are built cheaper. My TSW2000 is fairly heavy too. But when it comes to getting lights you want some weight to it so you know it's built strong and sturdy and will last a long time.. I called customer service a few times and they will help you out with any questions you may have about the products and they are very well educated in their products👍 very helpful and very friendly. They are awesome 🤜🤛. I can't say enough about this grow tent too. The thing is a beast. I've owned a gorilla grow tent before and MARS HYDRO TENTS are better. Don't waste the money on a gorilla tent, get a mars and save a couple hundred bucks for your fertilizers and soils👍🤜🤛I could use the canvas tent to make a trampoline and i doubt it would break its that thick👍 I've had some cheaper tents made of 600d canvas and they aren't that bad. But when you get a tent made from 1680D canvas material it's insane how strong and heavy it is. Before I put the tent together when I lifted the canvas to start wrapping the frame I said to myself.. LORD TUNDERIN JESUS this has some nice weight to it. It was the easiest tent to put together that I've ever had. I went inside with the lights off and got someone to turn it on after a minute or two to look for light leaks and there was none👍. It even blocks out some noise, so if your fans or filters are loud, once it is zipped up it gets quieter. this tent is awesome with So many ports and vents for whatever you need to hook up to it. It has frame bars down the middle and one vertical pole in the middle to keep it sturdy but the poles are made nice and so thick that they probably didn't even need a vertical bar in the middle. It has 2 separate 4x8 floor trays that divide it into 2 4x8 tents. All you need is a mylar divider to easily divide it in half. I love the stickers it comes with. It's nothing big to some people but I know there is lots of people that like them because you see them everywhere in people's tents and in pictures. I love them they are super cool stickers👍. It really locks in the light and temperature and humidity good. Lots of room for all the equipment I have to go in it and will get to put in it. Be good to bring camping too🤣🤣🤣🤜🤛. Thanks for stopping by and taking the time to read this and please leave a comment 🙏🤜🤛 if you have any questions about any of the products I use please feel free to ask me and I can help you out👍🤜🤛 I also know about all their other products too, so any questions about stuff I'm not using I can still help you guys out🤘 and ask about pricing if you're interested in anything and I'll see what kind of deals I can hook you up with. But don't just buy stuff.. let me know so I can talk to my friends at mars hydro and probably get you a better deal👍🤜🤛 https://www.mars-hydro.com Promo code: Rocknroll @marshydropenny Here's some more information about these products I'm using: The goal of MarsHydro is simply to produce the best value grow tents in the  growing field and they didn't disappoint me at all. I'm beyond satisfied with everything. And with the most up to date hydroponic equipment at the lowest prices possible. Their grow tents have combined all their engineers and customers' advice to produce these unbelievable tents.. they really listen to us and change things to our liking so if you own anything from mars just contact them and let them know.. they take our advice and considerations VERY SERIOUSLY so don't hesitate to let them know 💪🤜🤛 The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍 https://www.mars-hydro.com/ Promo code: rocknroll @marshydropenny GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! https://www.mars-hydro.com         PROMO CODE: rocknroll @marshydropenny Happy growing to all my friends 🤜🤛

Not much to report. Growing very well. Little to no issues.

So she sprung up during the week!! Lets see what she does. I'm in need of a sativa strain at the mo.

This OGgelato is a champ! Not the heaviest producer, but its been a real pleasure and was easy to grow. No matter what nutrients I throw at her, or aggressive pruning, she bounces right back. This week I found bud rot on one of my other plants in the greenhouse but this plant has so far been resistant and is healthy. I thinned the canopy and defoliated out quite a bit to create more air flow. I now have fans on 24/7 and sprayed with a mycorrizhal fungicide that suppresses botrytis. Also this week I have stopped pulling the tarp on and off each night (for total darkness) because it seemed to trap in too much humidity at night. The humidity outside has been 80-90% for over a week! And the rain was so heavy all last week. This week is slightly warmer with less rain so hoping we can make it. The trichomes are starting to get milky. I imagine I have 1-2 weeks left but am not sure. This has been a pleasurable experience for sure, but this is stressful right now! The smell is so strong you can smell it on my block. You can see *everything* from the alleyway adjacent to the greenhouse. I'm worried about mold and thiefs and can not wait for this to be dried and in jars!