Likes
Comments
Share
Got some Nute burn my fault, caught it to late thought it was something else but do beleieve it was Nute burn. The high ppfd didn’t help either. They all bolted and are now flowering beautifully.
Likes
12
Share
01/24 - She ran great - Hit a hiccup with the mother and lost her right after the last set of clones where plucked - Human errors prevented the plant from reaching full potential but did produce very big Colas and final product was dense sticky nuggs with a wonderful terpene profile. She (clones) was awesome to run and will definitely be running soon and will be in rotation. 01/26 - The ladies locked up pretty nicely - Dense even 3.5G nugs - Run 60/60 on the dry and it completely negated the dreaded "Hay Smell" terpenes are very noticeable with clean notes of the lemon while burning. 01/31 - She finished off wonderfully - amazing smell - terpenes locked in nicely - easy to trim - with a better light I could have seen a 35% increase on final yields easily.
Likes
12
Share
best cannabis I ever grew and smoked. Others agree. This is a cup winner I would win with no competition. 3 months harvested, 90% consumed. Will run more genetics and future cross, backcross. Feels like energy drinks, positive, 100% youre high and lit, extreme ripped. Smell is slight citrus, this is very sweet tasting and smelling because of my methods of growing. Oozing sticky like an industrial adhesive. Daytime smoke, ripped no couchlock. For heavy daily smoker this is above your level of comprehension, good luck finishing 0.5g session. 10/10 all categories. 4 months after harvest video macro, this is what 40% looks like
Likes
1
Share
She's doing nicely , hoping to see the buds fill out this next week. She's the biggest plant i've grown to date and there's bud sites everywhere, the gelato accompaning her is further on and will soon be having her last feed she is not drinking much at all compared to the zkittlez at 3 litres every day
Likes
31
Share
Welcome to 📅 Day 43: flower 4/26/2021 she is growing so good for only 3 weeks in flower the air stone is doing great in the pot and doing just what I want it to do. The Mars Hydro TS 1000 light is really showing its stuff right now as the flowers are getting big fast The deficiency's are staying small so I guess my plan is working I just need to keep an eye on it. That's it for now Happy growing and as always keep your stick on the ice 🏒
Likes
119
Share
Time to give this P2000 a secont run, and in it i will run a single clone that i took from my previous run, i took one from each phenotype and from them i chose the one i like the most in terms of plant structure , terpene profile and in the end smoke test also, that one is the most important one lol and the one with the most value on my decision, saying this dont judge me on this hahahaha i kind a forget it in the corner and now its time to bring her up to her full potential. I started by transplanting her from her tinny pot to a 25 L one , had to the soil 100g of All in one Pellets, a touch of microbial life and some Mycor to the roots and ready she is, gave them a foliar feeding with APTUS HOLLAND nutrispray and gave them a full feeding with the on the water sine the pallets will take a couple days minimum to start breaking and becoming available for the plants to take, i will let her adapt to it all for now and then i will star training her to became a tiny ginormous beautiful lady best, covered in trichomes and smelling like pines falling out of pine trees in the middle of the woods. As for the PAR department for now i am giving them 600 PPFD and running my VIPARSPECTRA P2000 @ 69% Looking at them an i decided that it was a good idea to start some training going on in this girl, so i gave her a new look and lets see how she goes from here, i spray them again with APTUS HOLLAND Nutrispray to help thing move faster . And they are coming back to life , in just a couple of days i can notice that they love the fact that im giving them my love and attention Is it just me or they are bouncing back fast af ? Not complaining at all hehehe , did some more training today, if they keep evolving like this i will be able soon to start taking leafs and selecting what to keep and what have to go. Just recently started collaborating with APTUS HOLAND and i have to give a big shoutout to them ,Thank you Aptus Holland for believing in my love for growing , fells amazing wen you already believe and buy a product and they come and start supporting your love for it all 🙏🙏🙏💚💚💚🙌🙌🙌✊✊✊ As always thank you guys for your love , your time, your support and it all, i fell blessed and i am truly thankful 💚💚💚🙏🙏🙏🙌🙌🙌 Let the games begin hihihihi All i grow is medicine for myself, for me and for my best friend with is me 😆 nothing to sell, so don’t even ask 😅💚💚💚 All info and full product details can be find in can find @ https://viparspectra.eu/collections/grow-lights DISCOUNT CODE 5% - DOGDOCTOR ( all store ) https://www.zamnesia.com DISCOUNT CODE 10% - GROWITGD ( just for seeds ) https://aptus-holland.com/ #aptus #aptusplantteck #aptusgang #aptusfamily #aptustrueplantscience #inbalancewithnature #trueplantscience #viparspectra #zamnesiaseeds #growerslove With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚💚💚 More info and updates @ https://growdiaries.com/grower/dogdoctor https://instagram.com/dogdoctorofficial https://youtube.com/channel/UCR7ta4DKLFMg2xxTMr2cpIg 💚💚💚Growers love to you all 💚💚💚
Likes
10
Share
8ème semaine pour ses dames,flush des racines.
Likes
2
Share
5/1 6 weeks, 4 days it’s flower tiiiiime! Desperately needing a repot on my autos but am stretched for space. I need a bigger tent!
Likes
2
Share
Put plant into tent a few days after it sprouted. Is now being fed by aeroponic system.
Likes
5
Share
@Ninjabuds
Follow
Both parents of this cross were super gas very weak start. Plants were not strong enough to push the seeds off so I had todo surgery. I really wander if it has something todo with how long you dry the seeds these were almost fresh seeds maybe 13days after harvest then I popped them. 3 of them going so far
Processing
Likes
22
Share
Still vegging, no preflower yet. Spreading her out till mid-flower. Hopefully she'll be a big girl. Accidentally snapped a branch in half attempting to supercrop. Taped it up, looking good as new... Been switching to led when temps from mh are too high...
Likes
30
Share
Hello Diary. The second week of flowering is over, so let’s see what it looked like last week. Watermelon Auto reached 61 cm, meaning it began to stagnate in growth. It is nicely branched and wide, it is full of leaves so I will need to do a little cleaning soon. I have yellow-brown spots on the lower leaves and the leaves are totally decaying, since I give her nutrients like her roommates Purple Punch, I’m not sure what the cause is. It could be over feeding, but also a lack of some element. All in all, the “Farm” is now a real jungle, along with Watermelon, there are also her two roommates, Purple Punch, so each of them is fighting for as much light as possible. The humidity in the Box is still lower than I would like, the temperature is good. Let's see what the week looked like: 24/02/2021 - Day 29. Watering. I regulated, that is, lowered the p.H. at 6.4 and put 1 Easy Bloom Tablet, on 7 liters of water. Temp / Humidity on the farm - 24.8 degrees and 42% humidity. 27/02/2021 - Day 32. Watering. I adjusted the p.H to 6.4 and added BioBizz as scheduled for the second week of flowering. Temp / Humidity on the farm - 24.9 degrees and 35% humidity. 02/03/2021 - Day 35. Watering and height measurement. This time I did not add any nutrients but only regulated p.H at 6.3. Height Watermelon Auto - 61 cm. Temp / Humidity on the farm - 25.2 degrees and 39% humidity. That’s it for this week, thanks to everyone who follows the diary, the support and advice I get means a lot to me. See you soon.
Likes
12
Share
@Doggy
Follow
In the video by mistake, the last pruning was done by cutting the fourth knot, however all were left with their cut to the third knot :) Happy growth!😁
Likes
2
Share
Im feeding her steadily at around 825ppm every morning monitoring any possible deficiencies. I did defoliate quite a few leaves from the to[ and bottom once I felt that she is thriving happy and growing more vigorously during the stretch. I raised the light a full 2 feet. during week 1 and now at the end of week 2 the tallest stalk is about 14 inches while most are around 20. reason for a few stalks being taller is because of what happened when our 3rd plant ended up being a male during the transition to 12/12. Im not gna try anything crazy to try and fix it. Obviously there are no problems so dont fix whats not broken I guess. Have a great week !
Processing
Likes
5
Share
@Ozgrow
Follow
Plants have stretched more than i thought. Been trying to fill out the screen as best as i can, some have worked better than others. Looks like there are plenty of bud sights. Began pk heavy this week so looking forwsrd to seeing them fatten up. I also gave a light defoliation under the canopy removing skinny stretchy stems receiving little light. I also removed some massive fan leaves that were blocking light from budsights. Not too many just enough to have light penetrate.
Likes
4
Share
@Sadom
Follow
22.08.: Die Blütewoche 3 beginnt. Ich bin noch bis Ende der Woche im Urlaub, sodass ich vom Anfang der Woche leider kein Material hab. Sobald ich wieder zuhause bin, werde ich ein aktuelles Update geben. Ich bin schon sehr gespannt, wie sie sich entwickelt haben, aber fest steht die G41 ist nen ordentliches Gerät geworden. Das Nächste Update kommt dann entweder am 25. oder am 26. Höhe Pflanze: PBB = 100cm G41 = 140cm Abstand zur Lampe: PBB = 66cm G41 = 26cm 27.08.: Wo soll ich nur anfangen?! In der Zeit, in der ich abwesend war hat sich die G41 so weit gestretcht, dass sie teilweise bis an die Lampe ran bzw. sogar schon vorbei gewachsen ist. Da das natürlich sehr schlecht für die Qualität der Blüten ist, wenn die Lampe zu nah an der Pflanze ist, musste ich sie bändigen und etwas Platz zwischen Lampe und Pflanze schaffen. Dafür habe ich ein 3. Netz installiert, welches jetzt als Stütze für die Triebe dient. Da ich auf gar keinen Fall zu diesem Zeitpunkt nochmal toppen wollte, blieb nur die Möglichkeit ein Supercropping oder auch Abknicken der Trieb durchzuführen. Dabei habe ich die Triebe kurz über dem Netz abgeknickt und dann auf dem Netz abgelegt. Dadurch werden natürlich untere Triebe verdeckt, aber das muss ich wohl in Kauf nehmen. Außerdem habe ich noch bei beiden Pflanzen einiges an Blättern und Triebe, die zu weit unten hängen geblieben sind, weggenommen, damit mehr Licht nach unten gelangt. Die PBB hat sich seit dem in der Höhe nur wenig verändert, aber ist dafür schon wesentlich weiter, was die Blütenbildung angeht. Man kann schon einige Trichome auf den Blättern erkennen und es kommen auch schon ein paar erste Terpene. Die Lampe habe ich von ca. 40% auf ca 70% hochgeregelt, damit bei der PBB auch noch ein paar Photonen ankommen. Abschließend gab es dann noch ein kleines Extra für die G41 in Form einer Handwässerung mit etwas Acti-Vera von BioBizz und hydrolysiertem Kelp, beides nach Augenmaß. Die Höhe der G41 anzugeben macht natürlich dementsprechend nicht mehr viel Sinn.
Likes
295
Share
@Ju_Bps
Follow
Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 Senesence in progress, but not yet ready for harvest, Harvest next week ! Continue flushing, 💪 Not too much work, just removed some leaves. 💧 Give water each 2/3 day 1.5 l Water + Flash Cleaner PH @6 RQS - Easy Bloom Booster Tabs 1 tabs/5 l RQS - Easy Grow Booster Tabs 1 tabs/5 l RQS - Easy Micronutrients Plus 1 tabs/5 l (1 watering each 10 days.) 💡Mars Hydro - FC 3000 50% 50 cm. Mars Hydro Fan kit Setting 7 Have a good week and see you next week 👋 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - Smart FC3000 300W Samsung LM301B LED Grow Light💡💡 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - 6 Inch Inline Fan And Carbon Filter Combo With Thermostat Controller 💨💨 https://www.mars-hydro.com/6-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller RQS - Titan F1🌲🌲 https://www.royalqueenseeds.com/f1-hybrid-cannabis-seeds/624-titan-f1.html
Likes
33
Share
@Ema26
Follow
Day 92: what’s happening guys! Week 14 is here. Temps have been okay and humidity has been okay. I’ve got the 400w hps set up and it’s dropped temps slightly and slightly raised humidity which is what I wanted. In my opinion she’s looking ready for the chop! I’m seeing plenty of cloudy trichomes and a few ambers and I’m going for less of a couch lock so I’m thinking around now she is ready. I started plain water 6 days ago and she’s recieved 2L,1L and then 1L again today. All leaves have started yellowing, I imagine this is the plant pulling the nitrogen from the leaves as there’s none at the roots. How much longer does she need to be fed plain water for before she is ready for the chop? Thanks! Stay safe and happy growing✌️🌱🍁 End of the day edit: I decided to harvest the majority of her. The bottoms just a bit under developed so I’ll leave it going a bit longer. After chopping and taking photos out of the hps light the nugs are looking a tinge purple although I can’t see it as strong with my eyes. Hopefully I’ll get a wet weight later so I can add it to the diary later on. Temp is around 24c and humidity is 45-55. How does that sound? I’ve got extractor at the top and a fan at the bottom. We’ll see how long it takes to dry, hoping to go for atleast 5 days. With the virus going around I’m really making use of what I have at home so hopefully the climate will hold up🤞 any tips and advice about drying and curing etc is hugely appreciated🙏 I’ll be back with the harvest update once she’s dried out✌️many thanks happy growing!🍁🌱 She weighed in wet at 110 grams. Any ideas what she’ll weigh dry? I’m guessing an ounce if I’m lucky.