Likes
Comments
Share
@Unkraut
Follow
i accidently bought some unbuffered coco and mixed it with my ussual earth, had major calmag problems in mid-flower but i´m still pleased with the results...also had a little trouble with mold at the end due to bad weather and high humidity in the final weeks of the grow, had to remove a few buds and harvest early @ day 55 of flower....but there's still alot of great looking buds left for me to enjoy and all look mostly done... Just harvested and hung them upside down, currently drying them at constant 19.5-20.5°C and 50-60% RH..will update as soon as they are dry
Likes
66
Share
@Hashy
Follow
Light settings 12/12 on at 9.00am off 9.00pm Light power= 62% 150w Radiator settings LIghts on Turn on if temp drops below 23c Turn off if temp goes above 23c Lights off Turn on if temp drops below 19c Turn off if temp goes above 19c Dehumidifier settings LIghts on Turn off if humidity drops below 60% Turn on if humidity goes above 60% LIghts off Turn off if humidity drops below 62% Turn on if humidity goes above 62% Extractor settings temperature 24c with 1c steps Humidity 54% with 2% steps Max speed 9 Min speed 4 VPD aim 0.8-1.2 Wednesday 1/3/23 Day 36 Autofeed 5 15 minute runs Water 10L Ec=0.21 Ph=6.5/7.0 3L left Roughly 2.3L each. #1 no runoff 7.15pm Lowered light 3cm #1 DLI= 26.8 Thursday 2/3/23 Day 37 10.00pm Extractor settings temperature 24c with 1c steps Humidity 54% with 2% steps Max speed 10 Min speed 5 Friday 3/3/23 Day 38 Autofeed 5 15 minute runs Feed 10L Ec=1.73 Ph=6.3 2.5L left. Roughly 2.5L each. #1 no run Saturday 4/3/23 Day 39 5.00pm #1 Height= 28CM Dist= 40CM DLI= 25.3 Lifted lights 3 clicks and Lst and defoliate Sunday 5/3/23 Day 40 Bit of Lst and scrogging Monday 6/3/23 Day 41 Autofeed 5 15 minute runs Feed 12L Ec=1.78 Ph=6.3/6.3 4.5L left Roughly 2.5L each. #1 no run #1 DLI=25.8 Lifted light #1 Height=29CM Dist=46CM DLI=21.0 Tuesday 7/3/23 Day 42 (Day 14 flower) Radiator didn't come on when it should have. It was cold today and I don't understand why the sensor didn't trigger the Radiator. #1 Height=29CM Dist=46CM DLI=21.0 The 2nd week of flower has gone well. I have tried to keep the canopy of the overall grow as level as I can, the only problem with running different strains is they all have different traits and grow at different speeds. Nearer the end of the week the weather started getting cold again so the radiator is going to be working a bit more over the next week or 2. #1 Wedding Cheesecake FF still hasn't started stretching so I'm thinking she is going to be a short and bushy. She is looking really healthy and I think she is spread out enough not to cause any problems with airflow. Power used for week Light (1.77+1.84+1.84+1.84+1.84+1.83+1.84)=12.8Kw Extractor (0.19+0.24+0.25+0.27+0.31+0.31+0.41)=1.98Kw Fans (0.48+0.47+0.47+0.47+0.47+0.48+0.48)=3.32Kw Dehumidifier (0.69+0.65+0.0+0.01+0.6+0.02+0.69)=2.66Kw Radiator (3.3+3.98+3.38+3.16+3.8+3.31+4.07)=25.0Kw Water pump. (0.02+0.0+0.02+0.0+0.0+0.2+0.0)=0.24Kw Total for the week=46Kw Back in a week. Thanks for stopping by.
Likes
2
Share
Girls jus doing their thing living their best
Likes
2
Share
Very easy first grow very happy with results best weed I ever smoked and I can only get better from here so I'm excited to keep seeing more and more progress
Likes
14
Share
@Terpyboyz
Follow
So this grow came to a finshed but I had a. Few issues that’s held me up from finishing up the diary, but in due time I will reupload it all in order soon. But over all I will also update with a final weigh in of each strain produced so stay tuned 🤙🏻🔥
Likes
2
Share
Day 32 flower update Emerald Harvest nutes everything looks great...they're fattening up this week...they're all 60-70 day flower times as recommended by the breeders
Likes
3
Share
@Rumyn88
Follow
Hey all, its our 2nd week after casing drop. Facing some issues with Night temp, sometimes it could fall to +12C, thinking about how to improve it. Also concerned about slow growth because of that. Using just 1/3 of Plagron recommended dose. Modified a bit my tank, made some technical window. Also set up automatic irrigation, because wool started to dry up during the day Upd Sunday 10.12.2023, Decided to put Babys finally to Seramis. Washing ceramics is some kind of hell: -First, I decided to sift all the dust through a sieve, stood in a half-bent position with bags of Seramis for 30m (my back didnt like it), but there was a lot of dust. -then I decided to check the Ph and rinse thoroughly. Although the package says 5.5-5.7 Ph, after the first flush with a balanced solution at 5.5 Ph, there was 6.5 in the drainage. - I was concerned by the very muddy brick colour water, then got tired of mixing 5.5 in a bucket for flushing and decided to rinse it with tap water from shower and then balance it back to 5.5 Ph . As a result, I poured from the hose for another 30 minutes until the water became more or less transparent. -I also tested FloraFlex discs, they drip great and, although round, fit perfectly into my square grow bags. -Meanwhile, the Milwaukee Ph meter broke down, even the readings of the calibration buffer were changing from 4-6 Ph within one minute. In the end, I spent another 30min and half a bottle of buffer on this too. It’s good that i had yellow Chinese Ph meter, which even after 3 years of rest in the box showed accurate buffer readings. -Finally, the Ph of the drainage was 5.5-5.7 and it was transparent, so I began to move it into the growbox. I sprinkled it as much as I could, it was impossible to dig deeper. The plants do not yet reach the matrix disk, so for now they will grow with the usual felt. -The cap of the tank is very thin and cannot withstand the weight of 2 grow bags, I’ll have to come up with something else, maybe I’ll put some kind of drainage grid. Watering will be from a tank with a mixed solution of 5.8 Ph and 1.1 EC.
Likes
13
Share
@dillande3
Follow
Hello, Day 56, Flower Phase , Gelat.OG, Final week of flower phase is started, Day 63 or week 9 I am planing to harvest the plant, Trichomes still cloudy but in some buds I can see slightly amber color on Trichomes, I ll ask a QUS before I do the harvest anyways. PS there is BUD ROT Prob just seen it Yesterday 31-12-22 - Seeking answer for that grow QUS, Guys pls help Thanks. Pls check last Video for BUD Rot Problem. Thanks Day 56 - 29/12/22 Day 58/59 - 31/12/22
Processing
Likes
22
Share
Del 5 al 12 de julio Buenas a todos otra semana más. La cosa avanza bien y Esta va a ser la última semana que actualizamos únicamente una vez por semana, volveremos a las actualizaciónes diarias. Continuamos con nuestro LST diariamente. 8 y 9 de julio Usamos el quemador de azufre alrededor de unas 5-6h como preventivo ante posibles plagas. 10 de julio Hoy a tocado poda (bastante severa) podamos algunas hojas y seguimos doblando las ramas. Las dpblamps entre si, por debajo, por arriba... Por todos lados, es una salvaje. Las temperaturas están siendo muy buenas en comparación a lo que me llegan en cuanto a los indoors de mi alrededor y de otros compañeros. Tenemos unos 25 - 26°C en On cpn Max de 27.8°C y mínimas en pdf de 23°C. Preparados porque viene lo bueno. 11 de julio Regamos vía foliar 1 ml aceite de nem + 10ml spruzit + 1 ml de un producto que nos dieron para probar como preventivo e insecticida. De este mismo liquido inundamos la bandeja unos centímetros para realizar un riego vía absorción. ¿ Por qué ? Pues porque los trips se alimentan en la superficie pero viven en la tierra, y muchos de estos están en la parte inferior de la maceta por lo que no tendran salida estos bichillos. Mi guerra con ellos ya viene de tiempo atrás y quiero mantenerlos a raya.
Likes
22
Share
@Aeromax
Follow
Finally those will become mother plants as well since some friends asked me for clones so i will keep up the diaries but i won't switch these ones into flowering yet. I'm planning to start my clones at the end of this month. I will be doing a main-lining with 15x15 rock wool and FloraFlex stuff 😎
Likes
16
Share
The Plant didnt grow much in high and is growing just above the Earth. Maybe i sat it to deep, or its the Genetik i dont know lets see where it goes.
Likes
16
Share
@Tezza2
Follow
This week i split the stem on my purple lemonade auto to see if it gets bigger yield and bigger buds i will soon see the purple only has about three weeks to go the gorilla glue auto has along way to go but its flowering hard and fast
Likes
15
Share
It's all happening. Buds are thickening out really nicely. The only downside is that I haven't anticipated how tall haze grows. I've had to do a bit of LST on my largest top bud to keep it away from the light....it has grown about 5cm from the lamp, so i've trained it back down to 10cm under the lamp. Next time I need 2 ScROG nets - The first needs to sit about 15cm from the base of the pot, with constant training in the weeks 1-3 to get the plant growing right to the edge of the tent. The second will be added in week 5-6 about 40cm from the base of the pot - when the plants meet the second net I'll then train the top buds inwards towards the centre of the net. I am also DEFINITELY defoliating properly next time - all the lower branches have died off and I'd like all that energy to be directed towards the flowers. Has to be the last job before I flip my lights.
Processing
Likes
68
Share
hello guys some news on the flowering day 28 nothing special has changed, the next week i put more bb and tm i go to switch to the maximal dosage. 😀👍
Likes
1
Share
En general es una planta muy buena es un efecto liviano muy relajante en general. Terpenos muy cítricos sabor cáscara de mandarina.
Likes
19
Share
Hoy fue la peor semana del cultivo y de mi experiencia cultivando, siendo el tercer día de la semana 5 se me desprendió el ventilador en el indoor y se me cae sobre una planta quebrando la punta principal (blue moby). día siguiente queriendo doblar el tallo principal lo arranque literal, ahora está en un mal estado, en comparación a la blue moby que recupero. Leo criticas y concejos! Bh
Likes
76
Share
@Natrona
Follow
Special thanks to @DreamIT for showing me how to add music and animation to video. Check out my fountain video above for a short clip. Thanks to @UnorthadoxDude for influencing me ( by visual curiosity) maybe twisted an arm to buy some carnivors. Well I happened to find some at our annual master gardener plant sale. I will be putting some in the tent. Lots of growth in my carnivores. Flowers on Sundew.
Likes
12
Share
Overall grow cycle was easy,strain reacts very good to topping and will work great in a scrog,smell tastes and effects are on point,more sativa to it.
Likes
16
Share
Mind-expanding and pleasure-inducing, Hypno Seeds presents its autoflowering version of the famous Amnesia Haze, Hazenberg AM Auto. For lovers of Sativa, this quick-growing autoflower cannabis strain will definitely be a big hit. With its incredible earthy flavors and delightfully euphoric effects, like a cannabis mantra, this strain will have you saying its name over and over again. Tech Specs THC 16%-21% CBD 0.40% Flavor Cinnamon, Lime Tree, Patchouli, Sandalwood, Walnut Type 25% Indica / 75% Sativa Flowering 8-9 Weeks From Germination Height 70-130 Cm Effect Corporal, Energy, Extra Sensual, Happy, Sociable Genetics Amnesia Haze X Autoflowering --------------------------------------------------------------------------------------------------------------- Grow Sponsored by MARSHYDRO HIGH EFFICIENCY WHITE LED LIGHT: Newest SMD LED technology provide highest PAR/LUMEN output(743umol@18"), designed to replace a single-ended 250watt HPS; MARS HYDRO TS 1000W Plants Growing lamp makes you get 30% higher yield compare OLD blurple led lights, Max 2.0g yield per wattage (power draw) LOW ENERGY CONSUMPTION GROW LIGHTING : Consuming only 150W with 342 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 2.5x2.5ft,Max coverage 3x3ft. Over 90% light energy can be absorbed by plants; higher intensity and more even coverage in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS1000 SUNLIKE FULL SPECTRUM LED INDOOR GROWING: 660-665nm Red IR/3200-4200Knm/5200-6800Knm, infinite close to natural light, best for all plants all stages growing, rapid plant response from seed to flower and increase yield & crop quality‎ HIGH REFLECTIVE & NOISE FREE-Fanless LED GROW SYSTEM design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom Get your own at https://www.amazon.de/dp/B07ZVFBR34