Recommended
Likes
Comments
Share
@Ryno1990
Follow
The Purple Goat Cheese from Goat Genetics is comming along good after another round of topping now just gotta let her sprout up some more under the medic grow fold 6 an then she will be ready for flower
Likes
57
Share
@HighDran
Follow
Es la más grande en rendimiento y apesta casi toda la casa y sale un poco den olor a la calle🙌🏻 Ya solo espero a que seque para actualizar
Likes
15
Share
How do you produce electricity with living plants? By using the natural processes that already occur. In short: the plant produces organic matter via photosynthesis. Only part of this organic matter is then used for its own growth. The rest (40% of carbon capture) is excreted via the roots. Around the roots, bacteria feed on the organic matter and they release electrons. If you’re able to harvest the electrons into an electrode, you can couple the first electrode to a counter-electrode and build an electrical circuit, like in a battery. The electrons flow back into the natural system via the counter-electrode, so it’s completely circular. 0.23v tuned to 7.83Hz Plants exposed to the Schumann resonance often show greater resistance to stress factors such as drought, diseases, and pests. It is possible that these natural electromagnetic waves strengthen plants' immune systems and increase their ability to resist disease. Magnesium (Mg) is a chemical element classified as a light, silvery-white, alkaline earth metal, and it is the lightest structural metal. Magnesium is a central component of the chlorophyll molecule, the pigment responsible for the green color in plants and vital for photosynthesis, where plants convert light energy into chemical energy. The photoelectric effect of 285 nanometers (nm) ultraviolet (UV) light on a metal surface causes electrons to be ejected with a maximum kinetic energy of 1.40 electron volts (eV). *Salinity3.5% - 100ml H2O=100g The concentration of salt in a solution 3.5%= 3.5g in 100ml. Growing well. Not going to top or do any training, I'll let the plant do its own thing, she is constructing foundations now for what she senses ahead. Smart girl. ✨️ Let her, do her thing, let me do mine. The voltage that is needed for electrolysis to occur is called the decomposition potential. The word "lysis" means to separate or break, so in terms, electrolysis would mean "breakdown via electricity. Green hydrogen is hydrogen produced by the electrolysis of water, using renewable electricity. The production of green hydrogen causes significantly lower greenhouse gas emissions than the production of grey hydrogen, which is derived from fossil fuels without carbon capture. Electrolysis of pure water requires excess energy in the form of overpotential to overcome various activation barriers. Without the excess energy, electrolysis occurs slowly or not at all. This is in part due to the limited self-ionization of water. Pure water has an electrical conductivity of about one hundred thousandths that of seawater. Efficiency is increased through the addition of an electrolyte (such as a salt, acid or base). Photoelectrolysis of water, also known as photoelectrochemical water splitting, occurs in a photoelectrochemical cell when light is used as the energy source for the electrolysis of water, producing dihydrogen . Photoelectrolysis is sometimes known colloquially as the hydrogen holy grail for its potential to yield a viable alternative to petroleum as a source of energy. The PEC cell primarily consists of three components: the photoelectrode the electrolyte and a counter electrode. The semiconductor crucial to this process, absorbs sunlight, initiating electron excitation and subsequent water molecule splitting into hydrogen and oxygen. Water electrolysis requires a minimum potential difference of 1.23 volts, although at that voltage external heat is also required. Typically 1.5 volts is required. Biochar, a by-product of biomass pyrolysis, is typically characterized by high carbon content, aromaticity, porosity, cation exchange capacity, stability, and reactivity. The coupling of biochar oxidation reaction (BOR) with water electrolysis constitutes biochar-assisted water electrolysis (BAWE) for hydrogen production, which has been demonstrated to reduce the electricity consumption of conventional water electrolysis from 1.23v to 0.21v. Biochar particles added to the electrolyte form a two-phase solution, in which the biochar oxidation reaction (BOR) has a lower potential (0.21 V vs. RHE) than OER (1.23 V vs. RHE), reducing the energy consumption for hydrogen production via biochar-assisted water electrolysis (BAWE). BAWE produces H2 under 1 V while eliminating O2 formation: key word "eliminating". Air with a normal oxygen concentration of around 21% is not considered explosive on its own; however, if a flammable gas or vapor is present, increasing the oxygen percentage above 23.5% can significantly increase the risk of ignition and explosion due to the enriched oxygen environment. The addition of ion mediators (Fe3+/Fe2+) significantly increases BOR kinetics. Air: Nitrogen -- N2 -- 78.084% Carbon Dioxide -- CO2 -- 0.04% Hydrogen in homosphere H -- 0.00005% Hydrogen "GAS" H2 in homosphere - 0% "Nitrogen, oxygen, and argon are the three main components of Earth's atmosphere. Water concentration varies but averages around 0.25% of the atmosphere by mass. Carbon dioxide and all of the other elements and compounds are trace gases. Trace gases include the greenhouse gases carbon dioxide, methane, nitrous oxide, and ozone. Except for argon, other noble gases are trace elements (these include neon, helium, krypton, and xenon). Industrial pollutants include chlorine and its compounds, fluorine and its compounds, elemental mercury vapor, sulfur dioxide, and hydrogen sulfide. Other components of Earth's atmosphere include spores, pollen, volcanic ash, and salt from sea spray." Although the CRC table does not list water vapor (H2O), air can contain as much as 5% water vapor, more commonly ranging from 1-3%. The 1-5% range places water vapor as the third most common gas (which alters the other percentages accordingly). Water content varies according to air temperature. Dry air is denser than humid air. However, sometimes humid air contains actual water droplets, which can make it more dense than humid air that only contains water vapor. The homosphere(where you live) is the portion of the atmosphere with a fairly uniform composition due to atmospheric turbulence. In contrast, the heterosphere is the part of the atmosphere where chemical composition varies mainly according to altitude. The lower portion of the heterosphere contains oxygen and nitrogen, but these heavier elements do not occur higher up. The upper heterosphere consists almost entirely of hydrogen, cool. 78%nitrogen as N2, a far too stable bond to be used by organisms. 20%oxygen 0.04%co2 0.00005% hydrogen When lightning strikes, it tears apart the bond in airborne nitrogen molecules. Those free nitrogen atoms N2 nitrites then have the chance to combine with oxygen molecules to form a compound called nitrates N3. Once formed, the nitrates are carried down to the ground becoming usable by organisms. Will it react with the oxygen in the air spontaneously, the answer is no. The mixture is chemically stable indefinitely. A mixture with air near the release point can be ignited, but if this does not happen then when its concentration gets below 4% it will be unable to carry a flame. Taking a small detour into chemistry here, a key concept to understanding the health impact of nitrogen-based compounds is knowing the difference between nitrates and nitrites. A nitrite (NO2) is a nitrogen atom bonded to only two nitrogen atoms. Very strong bond. A nitrate (NO3) is a nitrogen atom bonded to three oxygen atoms. Weaker bond The optimal pH for nitrate (NO3-) depends on the process and the type of bacteria involved. The optimal pH for nitrification is between 7.5 and 8.6. Nitrification is the process of oxidizing ammonia to nitrate and nitrite.
Likes
67
Share
The week ends Sunday Mar-1, being day 61 - week 8 of flowering since flipping the lights. From first pistils shown, it's day 45 which is a more accurate snapshot of where the plants actually are in their maturity. Started the ripening feed phase for the plant. No other nutrients or supplements added (other than enzyme). Lots of orange hairs covering the top buds and buds lower are beginning to also ripen. Trichomes are cloudy now across the canopy with a few amber. Will be monitored for any changes to initiate flushing for 2 days prior to harvesting the tops. Not much change in the buds development on the plant. The CBD has dense nugget style buds with some swelling starting. Light is maintained at 30cm above the canopy, with single daily fertigation at lights on - watering 3L per day. Fertigation pH target is 5.9-6.2 whilst flowering. Stopped the practice of fertigating at lights off due to the other pot developing a springtales infestation. Need to allow at least 2-4hrs of lights on period after fertigation. The coco is not dry but still damp on the surface after 24hrs from fertigation. Seems the plant is slowing down the amount of water intake which is expected at this stage. Trying to maintaining an average RH in the space at 50% but it's getting harder now with all flowers. ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- The grow setup includes; - Secret Jardin DS120W tent (120cm x 60cm x 180cm) placed inside the bedroom. Passive & active intake of air is from a closed off section of the room where the central heating boiler sits - the intake is warm air (20 degC.) and fairly dry (40% RH) during the winter months. - Mars Hydro SP250 LED light - extraction fan - AC Infinity Cloudline T6 - ventilation fans - aquarium heater - small oil heater - small dehumidifier - 20L Airpots and 3.5L general pots for seedling stage - Canna Coco substrate and nutrients - GHE Flora trio nutrients - pH and EC/TDS meters - 2x Govee Thermo/Hygro meters (one at canopy the other at the roots level)
Likes
6
Share
@ggiolla
Follow
so far fully satisfied. the plant looks strong and a nice color. the first hairs are noticed. I notice signs of some parasites on the leaves, up to now I have only found about 2-3 small spiders clearly visible to the naked eye, and perhaps some other specimens of whiteflies. I accept advice on how to prevent an infestation in the best way.
Likes
19
Share
Strain was a great producer. shake: 41.5grams 77.5grams 2.0 grams Total= 121grams FLower: 116.6 112 60.1 57.3 63.7 44 26.1 Total: 479.9grams TOTAL Trim and Flower = 121 + 479.8 = 600.8grams = 21.25oz
Processing
Likes
14
Share
@Dunk_Junk
Follow
She's growing well this week. Her flowers are fattening up nicely! I was a bit worried that they will be airy not dense, but I was being too impetuous 😬😅
Likes
14
Share
Posting the phenos when I do them
Likes
28
Share
October 16, 2021 Both girls looking yellow and burnt. Overwatered and possibly underfed. I did let the soil dry out then added a 1/2 gallon of water that was mixed with Neptune's Harvest Fish and Seaweed (this stuff smells awful). Let's see what happens. I also think my Recharge has gone bad - its not bailing me out like it usually does. I contacted Real Growers and they are sending me a replacement. Awesome customer service!!!
Likes
14
Share
@Kdog27
Follow
Let’s see what the future holds for these lady’s
Processing
Likes
33
Share
These girls are starting to get really big and bushy! This has started to become quite the sea of green setup but they seem to be happy and healthy still! These are definitely slower to flower than my other strains going in the other box but with the long veg/flower time with this strain I know I’m going to get a decent yield compared to the LSD25 and BlueBerry! Continued with a light feeding with Advanced Nutrients, I’m starting to see slight bits of burn on the edges so I will have to keep an eye on them throughout the week. Hopefully she starts to develop some big colas soon!!
Likes
4
Share
@Ninjabuds
Follow
My Rainbow Melon plant is still one of the biggest in the tent, and it's definitely the smelliest so far. The only thing I'm not crazy about is how big the leaves are getting. It's been a challenging week with the constant rain and ridiculously high humidity. Keeping things dry indoors has been a real struggle. Despite the weather, I managed to flip all my feminized photoperiod plants to flower this week. I'm hoping the switch will go smoothly, but with this humidity, it's going to be tough.
Likes
13
Share
✌️🏻Coming on good glad to have the space now
Likes
151
Share
Respect for all of you, brother farmers! masters and beginners! thank you again for gathering on the pages of my diaries! we carry out our work with dedication and live on ambition! Come on guys....We have almost reached the end of this umpteenth harvest, the colors and aromas are something enchanting, dense flowers and liter glue
Likes
18
Share
Just waiting for amber trichomes. Cloudy with a chance of potency. Next door neighbor said he could smell it from his house. Beginning to worry about motivated thieves who might take a chance and scale our 8' fence.
Likes
8
Share
@phobic94
Follow
This week I started feeding my plant with an ec between 0.6-0.8. I also lowered my lamp so they get more light and I topped the plants and started lst.
Likes
15
Share
@Lazuli
Follow
This strain is so frosty u wont believe it lol cant wait to harvest smells so fruity like frutella candy wtf msnl seeds is the boss
Likes
22
Share
@dillande3
Follow
Hello, Day 70, Flower Phase , PGK, Final weeks of flower phase is started, Day 84 or week 12, I am planing to harvest the plant, Trichomes still cloudy and buds looks grate, smells also like tropical Mango ))) cant wait to smoke this mannnn )))). Thanks Week 10 - Flower Phase Day 68 - 10/01/23 Day 70 - 12/01/23
Likes
61
Share
@Grey_Wolf
Follow
Sensi seeds Jack Herer 10 weeks of veg completed 11th Feb 2020 Hopefully this will be the last week of vegetation and this girl starts to flower because I have ran out of room to train her . I managed to get her to cover the entire circumfrence of the pot and then some, using a combination of LST and HST . I also did the last topping about 10 days ago and won't be doing any more. The soil must still be very fertile as the plant itself looks really healthy and lush. Only water was given as I still haven't got around to extracting some worm castings from the worm farm. But it'll happen and when it does this girl will get half a kilos worth which I am sure she will appreciate. Also apart from the odd bite mark on a leaf the plant has remained pretty much insect free as far as pest insects are concerned. I put this down to the Companion Coriander plant that has been coexisting beside my Jack herer girl right from the start . Apparently most bugs dislike coriander and will purposely avoid it which is a win win for both plants. Thankyou for reading this weeks update and I will return next week hopefully with reports of Flowering beginning. 👍