It's been a good week for the girls they're stretching into flower real nice. Plant height is 14 to 20 inches. I just got the dripper setup going at the end of the week and will be fussing with it till I'm happy. I will be watching the ph and ppm's in the res to make sure they're on point and topping off when needed. Thanks for looking😊

It's time to harvest the crops, today was the day of the first Green Crack F1 Hybrid Automatic by Zamnesia. ** Remember that for all strains we have at least two plants, one left to grow straight and one worked with the techniques. Technique Used // In this case we see the plant worked with the MAINLINING technique: we waited for the third internode and did TOPPING (you can also do it at the second to lengthen the vegetative phase in autoflowering plants, it's better); from this topping a MAINFOLDING was carried out by cleaning everything that was underneath in the underlying internodes and leaving only the two mini branches growing as a result of the first topping, the Mainfold precisely. We stole the two branches with the arches up to the third internode of each respective branch and we did TOPPING once again, from here the plant was left to grow directing it with LST as best we could. Better with the techniques or normal? It is a plant with a medium-low distance between internodes, this technique is not recommended, the plant is not very big but it has produced well anyway, let's wait to compare the results with the one without techniques but it is very big, the other one, in this case I tend towards the straight solution. Look instead at the Ghost Train Haze for example which has a wide distance between internodes, what did it do to me... immense. Flower quality // The plant has resined very well anyway, there is a very mellow smell, I think sweet/strawberries, I have to go deeper, the consistency is exceptional, I washed the buds as recommended on Zamnesia, do not underestimate this practice, I who look at the plants in , acre give away a lot of hair and a lot of waste of other nature, washing makes your grass better and more competitive even for contests and cups. Check the article in your language // https://www.zamnesia.io/it/guida-coltivare-cannabis/333-lavaggio-delle-ceme Feertilizers// I am very happy with how I managed to unload the plant that at a certain point before going flush was fed a few days only with additives and then went flush and we are discolored sufficiency. All the fertilizers and additives of Plagron in the green version / 100% organic have fully satisfied me. Choose your soil based on your style and calculate the sheet on the site www.plagron.com You can instead find the fertilizers in convenient all-inclusive packs on the Zamnesia site. Try a seed of this strain that drives us crazy.. ---- https://www.zamnesia.io/en/10677-zamnesia-seeds-green-crack-f1-automatic.html Zamnesia Description // Forget what you think you know about cannabis. Green Crack F1 Automatic by Zamnesia Seeds is here to shake up the entire industry. Using F1 genetics, growing cannabis has never been easier. These plants offer uniform and abundant yields. Get ready to harvest high-quality buds, full of flavor and amazing effects. Music and Frequencies // For about 4/6 hours a day my plants listen to 432Hz frequencies made especially for their well-being and sometimes a bit of black music to give them those vibrations that only music can give. www.radionula.com All the best that mother nature has to offer is at ---- www.zamnesia.com

OVERDRIVE TIME💪🏽

Well there's been so much growth in this week compared to last week! I am struggling with the little bit of nitrogen toxicity on one of my plants. I was going to send these plants to flower at the end of next week but I have to go out of town for two weeks. When I get back I will send the girls the flower. I did not want to leave the babysitter with plants that are just starting to flower. Hope everyone is doing well and a safe. Cheers! -G.I.JOSE

This week went well. No issues and the Snak plant grew 2 inches this week. She looks healthy and strong. I will be doing a little more research on topping this strain. I have never grown anything from Mosca Seeds. I don't know this strain well so I want to know if it will be tall and thing or short and bushy or something in-between before I decide if I should top her o not.

I'm enjoying a lot this genetic, the root system is super healthy and that's giving strong plants with desire to grow and produce frosty flowers :)

Die Woche startet mit dem dritten Blütetag, ich hab das Licht am letzten Samstag umgestellt auf 12-12. Heute (03.06) kamen die ersten kleinen Härrchen und sie beginnt sich zu strecken. Ich update Bilder im Laufe der Woche :)

6’-4” & 5’-8” as of today, 6’-0” average height. These ladies are beautiful! Everyone who comes by the house just stops and stares when they get near my garden. So do I 👍🤣 I had to move some plants outdoors from my indoor grow due to losing the battle to high heat and humidity. Two are super close to harvest, one might get cut over the weekend. Feel free to comment and let me know what you would do. Thanks!

No complains growth is out the window and buds size growth is kick'n the door.....let's see how the gym pays off 💪

@twenty20mendocino Ateam R&D Update ~ Lets Go day 38 of flower an these ladies are looking amazing! Gettin in some nice frost a the smell is insane, so many different terps Sour , skunky , fuel , gassy funk a berries 😍so amazing! Not too much longer to go a these ladies will be ready for flush , but let’s take it day by day!! Hope y’all enjoy an have an amazing productive day ! Cheers to y’all 😶‍🌫️💨💨💨💨

Organization was the word for the week. I organized the leaves on Daphni by cutting some old fan leaves and low level leaves. I organized my CO2 injection procedure. CO2 tank to REGULATOR thru SOLENOID connected to TIMER every two hours with lights on. I also organized the power strip in the back with cable ties and sleeves. Finally I had to organize my way out of a FUBAR situation when the oxigenating device in the RainForest 66 Reservoir stopped working. I will have some words to say to Katie in customer service for sure. I got a standard oxiginator and a disk shaped air stone and use that now to keep the water healthy. Daphni is staring to bud more on the lower nodes and the progress so far looks good. Knock on wood. Since i turn the exhaust fan off when CO2 is injected i dont really need the heater so I took it out. Have a great week.

June 7 - We ordered some new lights last week, they are 240w kingbrite samsung lm310h with uv/ir, 3000k, and meanwell drivers. We setup the new room and moved the girls into there. After a bit of LST and a watering (with nutrients) at roughly 7ph, they were ready to go under the 2 new lights and the same SF-1000 we have been using in this grow. The new room is a 12 ft enclosed trailer. I moved everything from the small tent into this. I put clear poly on the walls, floor and ceiling. I put poly on the shelf I am going to be keeping in there as well. I bought 50ft of 6mm mylar and lined the floors, roof and sides with it. I plan to get some reflective tape to seal everything and to cover the wood. I did not get much of a chance to watch temp's today as they it was later in the evening after all was said and done. The inline fan blowing in air from outside. June 8 - 9 AM i checked the plants, they were at 25.2 and 50% RH. Late through the day I had checked and we had gotten up to around 32 degrees. So I moved the inline fan to the closer vent, hooked up to that, and had the air blowing out of the trailer with the inline fan sucking it from above the lights. I then added oscillating fan and had it blowing air on the left side of the room so it would somewhat circulate once I closed the doors. I then checked at about 9pm and we were at 22 degrees. Definitely noticed a decent amount of growth already. I have the lights on a 22/2 cycle as I was worried about the heat at night time. June 9 - Some great growth from the girls, still having problems controlling the temps in the afternoon. I decided to prop the door open a bit to have a constant breeze throughout the day while I am at work. Decided to do some more LST and also a bit of defoliation. I took about 25% of the leaf's that were blocking the new growth as it was getting a bit bunched up. I was then told the leaf's are almost solar panels for them. So from now on I will be trying to just do some tucking unless needed. The leaf's I removed were most of the damaged leaf's, I am not to sure if that makes much of a difference. I gave them a watering with only water as there is a potential I am getting a bit of a nutrient buildup along with the PH problem. Or potentially the reason for the ph problem is nutrient buildup. After watering with A PH of 7 I got some run off and tested it. The smaller plant gave me a PH of about 5.5 where the bigger one is around 5.0. June 10 - Plants are looking happy and showing tons of growth. Seems to be trying to stretch outwards. Not a ton of sign of PH issues showing so potentially getting it under control. Still a bit of damage to previous leaf's but it is what it is! The last few days I have been leaving the door open a bit in order to keep the temps down. I decided to test something and turn the lights off (automatically) at 11AM and back on at 5PM so light schedule has now changed to 18/6 and it seems I may have figured out the issue. We haven't had lots of sun the last couple days so it hasn't been to hard and I have yet to know if it truly fixed the heat issue for now. (I will be looking into a ac unit as well since it typically gets to around 30-35 around here. June 11 - Pulled some of the branches back down and added a few more LST spots. Seems we have a good amount of growth from the smaller plant out of the 2 topped spots. Unfortunately it looks like I fucked up on the bigger plant and only one of the nodes seems to have new growth. I will continue to monitor that but I think I cut the node to low and also to soon. Other then that, the girls are doing great. They seem to be absolutely loving these new lights. I gave them some nutrient water today as well. roughly 3L each. They seem to be A hell of A lot more thirsty under these new lights. June 12 - The girls are doing great , they are still just doing growing away. Lots of progress everyday. I am going to be getting a go-pro so I can set-up a time-lapse for the rest of this grow. I received my new inline fan, I got A ac infinity CLOUDLINE T4 with the temperature humidity controller. I am going to be having one fan pushing fresh air in and one fan pulling out the hot air. I will be doing that tomorrow since I have to work today. June 13 - I ordered another 50ft of mylar and that showed up today. I have decided to remove the shelf and add another 3+ feet to the grow space. So today I installed more poly, mylar, the ac infinity fan. I have it set-up to pump in air if it gets to warm. I am thinking of switching it to the output that way if it gets to hot or to humid I can have that air pulled out of the trailer. Right now my other inline fan is the outtake and I just have it set on full. Overall I think everything is set-up a bit better and more accessible. I will be putting my 2x2 tent in there at the left of the doors so I can have a veg room when these 2 are in flower. I plan to have 4 in veg and 4 in flower for the next grow. Still waiting on JOTI seeds, ordered 3 weeks ago and still have not been shipped. I will be getting those going the moment they arrive. The girls seem to be happy still, did a bit more LST to try to keep everything even, mainly I'm just pulling down on the spots I already have tie wire on.

So excited to be finally drying her. She may have went another week, but it was time. She was quite the trooper! She survived over feeding and over watering. She wore her battle scars proudly though! Very nice nuggets, very little larf. Like maybe less than 10g. 💪👌 So very glad I have another, she deserves her own space! Mouth watering strain Im glad I got to grow! Again, TYVM Clarissa @Weedseedsexpress She is amazing and just as I hoped! Weedseedsexpress.com

Tag 78 : + 2L Flaschenwasser ++ Dünger mit wenig CalMag + final PH 6.10 + Abends Tag 79: Trichome an den äusseren Buds aufgenommen . Ende der Woche ist Erntezeit . Video hinzugefügt. Tag 80: es war heute echt mal 44%rH und das bei normalen Temperaturen . Tag 81: Komplette Entlaubung und Vorbereitung zur Ernte . Bleibt noch die Nacht so im Stofftopf (fast trocken) . Tag 82: Ach ich hab mich doch mal entschlossen mit 1.5 Liter Flaschenwasser + CalMag ein paar Spülungstage zu machen . Dieses im Vegetativen Zelt mit der 100W von Spiderfarmer auf extrem niveau (25cm Abstand) . DAs ballert nochmal schön auf die Trichome .

Gave her a heavy defoliation! She's growing very strong, and needed a little thinning out! The defoliation promotes the lower buds growth, by allowing more light penetration! The defoliation also ensures that airflow throughout the plant is strong!

Mars Hydro TS 3000 Dimensions: 25.3" x 22.8" x 2.7" Weight: 11.3lb Coverage: 4x4 feet Watts Consumed: ~450w Light Intensity: Up to 1150 uMol @ 18" height Spectrum: Full White + Infrared LED Brand: Unbranded LEDs Voltage: 120; 240; 277 Warranty: 3 Years Week 1 3/24/2021-3/30/2021: Day 1 3/24: Played Hip Hop Radio. 71.1-75.7 55%-74% Day 2 3/25: Played Hip Hop Radio. 75.6-78.6 45%-56% Day 3 3/26: Played Reggae Radio. 75.0-79.5 53%-60% Day 4 3/27: Played Hip Hop Radio. Mixed 2 ml Fish Brew to 1 gallon water=38 ppm 6.7 ph 68 f. only drank 0.25 gallons. 75.6-81.0 42%-55% Day 5 3/28: Played Eminem Radio. 66.0-80.1 48%-67% Day 6 3/29: Played Jimmy Hendrix Radio. 65.5-79.2 44%-77% Day 7 3/30: Played Cardi B Radio. Topped above third inter-node then defoliated all lower growth to focus on Main-Lining. Drank 0.25 gallons plain water=25 ppm 6.4 ph 69 f. 65.3-80.1 44%-77% Final Weekly Notes: So far so good no complains or worries. Very excited to have this amazing grow with such amazing products. Big thanks again to Coast Of Maine, Exotic Seed, Fish Brew, and Mars Hydro for this amazing experience. The Mars Hydro is very powerful I had to turn it down because I noticed a little light burn when I had it at 50% 24 inches away down 25% 24 inches away. Feel free to leave a like comment question or even give that follow button a tickle. I am always learning something new everyday. Thank you so much for stopping by and checking out my grows. Good luck stay safe happy growing cheers!!!!

Gracias al equipo de AnesiaSeeds, Marshydro, XpertNutrients y Trolmaster sin ellos esto no sería posible. 💐🍁 Coco Jambo: Con una composición genética 60% Sativa y 40% Indica, Coco Jambo es tu billete dorado a un verano sin fin, ofreciéndote una escapada a un mundo donde el sol nunca se pone en tu felicidad. Con unos niveles de THC que oscilan entre un relajante 30% y un estimulante 34%, Coco Jambo es un faro de euforia que guía a sus usuarios en un viaje a través de olas de serenidad y vibrante alegría. Su aroma es una celebración de los sentidos; imagina el momento de euforia al abrir un coco y descubrir que rebosa de las frutas tropicales más suculentas. 🌻🚀 Consigue aqui tus semillas: https://anesiaseeds.com/es/product/coco-jambo/ 💡TS-3000 + TS-1000: se usaran dos de las lámparas de la serie TS de Marshydro, para cubrir todas las necesidades de las plantas durante el ciclo de cultivo, uso las dos lámparas en floracion para llegar a toda la carpa de 1.50 x 1.50 x 1.80. https://marshydro.eu/products/mars-hydro-ts-3000-led-grow-light/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 💻 Trolmaster Tent-X TCS-1 como controlador de luz, optimiza tu cultivo con la última tecnología del mercado, desde donde puedes controlar todos los parametros. https://www.trolmaster.com/Products/Details/TCS-1 📆 Semana 10: Última semana antes del corte final, los cogollos están bien prensados y cargados de resina de un color muy lechoso, solo falta que se tornen algunos tricomas más en ámbar. MarsHydro y XpertNutrients han hecho de nuevo un gran trabajo 💪😍

momento preciso en que cague la planta con sobre fertilización, después de esta última alimentación se vieron los efectos del daño.