Today i Harvest one of both Ladys. Trichomes are 70% amber. The smell ist just AMAZING!!! I let the Big Buds dry in my Dry-Net. With the smaller one i do some Rosin Update: 1 day after the Harvest the weight is 63.12grams Condition of the Dry-Room : Temp = 16,5 C RLF = 43,1 2 vents are running (4+6inch) Smell= even better

I apologize for this diary not being thorough. I haven't had the extra time to fully document, or even give this grow the attention it deserves. Now that I have a couple grows under my belt, I feel more comfortable and know what to expect. I wanted to try and keep things as simple as possible, so I decided to try the Lucus Formula and only use Maxibloom through the full life cycle. For the first few weeks, I used nothing but filtered tap water, and once the plants had a few set of leaves, I began with a half feeding. After a week, I bumped to the full 7g/gal of the nutes and have continued that to this point, week 11. One plant looks to be at least a week closer to being ready to chop. I plan to flush after this week and cut the larger one, and then maybe one last feeding for the other. I think I will only grow 1 plant at a time going forward as I always have an issue with keeping both healthy and on pace. And LST works great in this setup.

Only flush now 😇❤️🌳

almost

31/8/21 Day 29 #1 Ph 5.7 E.C 1.0 #2 Ph 5.7 E.C 1.0 #3 Ph 5.7 E.C 1.0 3/9/21 Day 32 #1 Ph 5.7 E.C 0.9 #2 Ph 5.7 E.C 1.0 #3 Ph 5.7 E.C 1.0 5/9/21 Day Day 34 #1 Ph 5.7 E.C 1.2 #2 Ph 5.7 E.C 1.0 #3 Ph 5.7 E.C 1.0 6/9/21 Day 35 #1 Ph 5.7 E.C 0.9 #2 Ph 5.7 E.C 1.0 #3 Ph 5.7 E.C 1.0

Thank you for checking out this grow.

This week, I continued growing 4 WestCoast OG plants. The plants are feeling better day by day and have reached 78 days since planting the seeds. The care routine included: Watering every other day, 1 liter per plant. The water solution contained flowering fertilizer NPK 3-5-8 (10 ml/L) and organic super-concentrate fertilizer (5 ml/L). I noticed that the flower buds on the closer plants have significantly enlarged. The further plant, which was lagging in flowering, has caught up and now reaches a height of around 45 cm, with small 10 mm diameter flowers. One interesting observation - I found a mutation on one of the leaves, from which a small flower is growing that is not increasing in size. Next week, I plan to: Continue watering the plants with the same fertilizer solutions. Stop spraying the leaves to avoid the risk of mold on the buds. Closely monitor the temperature, as it's starting to drop outside and the room is not insulated. If the temperature falls below 18°C, the plant growth may slow down. Overall, the plants continue to develop at a good pace, and I expect to be able to harvest in 10-14 days.

This week has been good. Did a major defoliation getting all the bigger fan leafs off. Really opened up the light to those lower flower sites. This strain is taking its time, so I have a feeling the colds are going to get massive. All in all Happy Growing.

Day 31 of flower Basically the girls are on autopilot, with the autopots and Gaia green there really isn't much to do, both methods are super user friendly and the basic needs that need to be meet are just ph water in the reservoir every couple days and then watch them stack buds on top of buds...Occasionally I move a branch over to another square in the net to make room but Basically after the last top feeding it's just watch and weight, pun intended....

Day 29 Growth is very rapid, the plant has become a nice ball shrub from the leaf tucking and training DWC will get changed tomorrow, she is drinking alot, maybe 2L a day PH nailed at 6.0, ppms start at 700 and go as low as 500 when about to change the pool I will be careful with water temperature. It is very cold here already up in the mountains Day 30 Growth is very nice. The DWC change went very well, and the plant is still loving the above nutrient mix. Remember to mix properly! Micro first, and really stir it in, then your others, stir them in very well, followed by your powder solution, stir it in very well, usually for 2-3 minutes in the bucket or 10L bottle. I like the shape of the plant Ive trained with basic leaf tucking and defoliation PH is solid steady at 6.0, yellow colour on the test Day 31 Growth is extreme in every direction. all limbs are growing upward and outward Still determining which training methods I will use for this one Just leaf tucking now for the shape to form Day 32 added 3L to the DWC, she is consuming nutrients really well... going in its ~680 ppm, testing 18 hours later, 400ppm this is a very hungry plant! still leaf tucking the main fan leafs for the branches to grow upward, is working very well defoliated the under side of the plant, removed all 1st and 2nd limb node leafs and branches, they will only runt out and grow larf in the long run. Day 33 Extreme growth after defoliation, added 2.5 Litres to the DWC, the plant is drinking 2-2.5 litres a day uploaded video of the setup and plant Day 34 Growing very well, expanding everywhere. I added 2 litres to the DWC. Day 35 Growing well, performed some light LST on the lower limbs to expand a bit Added 3 Litres to the DWC, this plant eats alot of nutrients

Over all was an amazing grow, super sticky dense nugs with smell of berries, highly recommended for everyone!!

Hallo zusammen 🤙. Sie wächst sehr schön und macht keine Probleme.

I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"

All round sugarlato is looking like the healthiest auto I’ve grown so far. The smell is phenomenal and I will defiantly be using green house seed co for every grow I do. Genetics are 12 out of 10. Can’t wait to taste the end result!

Hey everyone :-) This week it smells more and more sweet and fruity in the whole room 😍. There is actually not much to report, everyone is now under 12/12 :-). This is the last grow that comes in the entire diary. From now on, each plant will be added to the diary 👍. I wish you all a lot of fun watching, stay healthy 🙏🏻 and let it grow 😎👌

Best smoke I've had in years!!!!

Growing nice and easy. No issues just doing a little lst and letting it grow