Likes
Comments
Share
ladies and gentlemen Welcome to peaky house gardens We begin to rinse the roots non-stop since this girl has also gone over with feedings.....but no problem...we will eliminate any residue with a simple balanced pH 😉👩‍🌾🏼
Likes
31
Share
@Endriu
Follow
Hi Bros&Sis! I've been a little bit lazy, indeed, but there's a lot of works to do here, on my girls and as a father of a big family. Enjoy the videos, I decide to put a single short for every strain, to see the beauty in full screen :D
Processing
Likes
16
Share
Hello Growers and Tokers! 👋 👩‍🌾 🧑‍🌾.🔥💨 Finally got that transpant done. Added a bit of root juice to help out the transplant. Won't be adding nutes until next week, directly bloom nutes.. Took waaaay to long to transplant. They didn't get any growth becuase of the bad weather these past weeks. Very bummed out about that. Two of the are already in prefower.. the tiniest i hope grows a bit more.. can't really ask for much more given the bad weather and that they're autos.. I'll for sure be doing a re run with this strain with better stable conditions. Take care out there! One love!
Likes
110
Share
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!guckt euch letzen Report an !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Blüte hat begonnen: Edit:11.05 Die Pflanzen sind innerhalb von 2 Tagen explodiert. Ich habe das Licht nun auf 75 Prozent gestellt und noch einmal Cal-Mag nachgegeben, da die letzte Gabe nur eine halbe war. Die beiden Titan sehen fast identisch aus. Die beiden Epsilon sind circa 3 Tage unterschiedlich, eine ist etwa 5 cm kleiner als die andere und hat noch kaum Blüten. Ich denke, in 3 Tagen wird das der Fall sein. Die Cosmos F1 ist im Umfang circa 50-50 cm, kaum Blüten bisher. Ich hoffe, sie wird nicht noch viel größer, da der Platz langsam eng wird. Ich bin von dem Wachstum dieser Pflanze absolut begeistert. Mal gucken, was die Blüte bringt. Edit ende Ich habe alle Blüten entfernt, die nicht im direkten Licht sind, und alle Blätter, die die Blüten bedecken. Die Pflanzen weisen einen Cal-Mag-Mangel auf, was bei der Blüte normal ist, gerade bei diesem Licht. Ich habe dem Gießwasser etwas Cal-Mag hinzugefügt. Die Pflanzen sind drei Tage älter als im letzten Report. letzte Woche : Die Pflanzen sind seit der Keimung auf diesen Fotos genau 30 Tage alt. Ich habe eine Pflanze ausgetauscht, da es sich um eine Epsilon F1 handelte, die vermutlich Mutationen aufwies. Sie hatte verkümmerte Blätter, die nicht wie die ihrer Artgenossen aussahen, und wuchs deutlich langsamer. Daher habe ich sie nach 2,5 Wochen ausgetauscht. Der kleine Mann(die ausgetauschte Pflanze) leidet natürlich jetzt ein bisschen unter Lichtstress, deswegen werde ich wohl nur eine sehr gestauchte Pflanze erhalten. Aber besser, als die Fläche leer zu lassen. So viel zu dem, was nicht funktioniert hat: Die Sanlight stand die ersten 2 Wochen auf 20 Prozent. Dann habe ich sie teilweise mit dem Dimmer höher gestellt: 2 Stunden auf 25 Prozent. Eine Woche später bin ich auf 30 Prozent und 2 Stunden mit 35 Prozent gegangen. Für Woche 4 habe ich 40 Prozent und 2 Stunden auf 45 Prozent gewählt. Ich erhoffe mir, die Pflanzen so schneller an die starken Lampen zu gewöhnen. Im Nächsten grow soll bei jeder Pflanze die TDS per Infrarot gemessen werden. Da werde ich dann ein Experiment zu machen, wie die Lichtsteigerung am besten umzusetzen ist. Zu den Lampen kann ich bis jetzt nur Positives sagen. Im Gegensatz zur dazugehörigen App, diese ist wirklich nicht sehr gut umgesetzt. Das Menü und die Einstellungen sind teilweise irreführend und nicht sehr durchdacht. Ich muss mir immer wieder die Tutorials in der App ansehen, da diese immer wieder angezeigt werden. Noch dazu hätte ich gerne die Möglichkeit, mehr Einstellungen treffen zu können. Das ist aber Meckern auf hohem Niveau, weil auch die App das macht, was sie soll, nur eben meiner Meinung nach nicht sehr gut umgesetzt. Die Pflanzen wurden von mir mit Klipsen aus dem 3D-Drucker gestützt. Diese Klips kann man Stück für Stück im Winkel verstellen, so dass man die Triebe damit neigen kann. Das habe ich von Tag zu Tag im Winkel verstellt, so dass ich am Ende einen 45-Grad-Winkel habe. Das habe ich insgesamt über 6 Tage gemacht. Die Pflanzen haben an sich ein sehr gleichmäßiges Wachstum. Die Cosmos F1 wächst so optimal, dass kein LST mit den Klipsen nötig ist. Ich habe an den Pflanzen keine Mängel entdecken können und auch keine Anzeichen von Mutationen. Die Pflanzen haben im Durchschnitt eine Höhe von 35 cm, wobei eine etwas stärker abweicht mit 22 cm (wieder eine Epsilon F1). Der Umfang mit LST bei der Cosmos F1 liegt ohne LST bei 20 cm im Durchschnitt, wo wir wieder die Epsilon im Negativen haben mit 14 cm. Die Pflanzen wurden alle entlaubt, das eine Woche vor der Blüte. Morgen werden die Pflanzen erneut entlaubt und ge-lollipoppt. !!!!!!!!!!!!!!!zusätliche infos werden morgen ergänzt + Fotos !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! *1. Foto Mutation: Dieses Foto wurde nur 5 Minuten nach dem Umtopfen der Pflanze aufgenommen. Vorher stand sie in einem größeren Topf, in dem sie genauso aussah. Ich habe sie umgetopft, weil ich den Topf brauchte, aber die Pflanze nicht wegwerfen wollte. Der Pflanze geht es gut, aber sie sieht im Moment etwas mitgenommen aus. Bilder folgen
Likes
5
Share
Gorgeous buds from this hard diesel pheno #2 guys, very lemony and sweetie aroma, I will see how good this lady is when I smoke her but looks and smells incredible, I enjoy with every strain of Gea seeds didn't get a bad plant so far, let's see how this lady keeps developing those NUGS!!! ❤️💚
Likes
6
Share
Popped through the dirt 3 days ago gave little water when I placed them onto there pots
Likes
9
Share
@Rizik86
Follow
Day 79 - Added 7 mL of CalMag Micro Grow and Bloom. Added 7 mL of each additive. PPM is 706. Day 81- Using noticeably less water now. Checked PPM 475. In moving the plant to water, a small branch broke. Trichomes are mostly clear. Started to dry it as a tester for rest of the plant. It takes 7 days for me to dry the tester at 70F and 40RH. Not ideal temp but that is how it goes. Day 82 - Might have seen first amber trichs Day 83 - Added 10 mL of Overdrive. PPM is 430. Trichs are mostly cloudy. Hairs are 80% orange. Branches are leaning from the weight. Day 86 - Added 5 mL of CalMag Micro Grow and Bloom. Added 5 mL of each additive. PPM is 588.
Likes
5
Share
@Ninjabuds
Follow
Hey there it’s been really cold lately it’s been hard to keep the humidity and temps at a decent range. A lot of the plants are showing stress from the environment. The pound cake auto is doing pretty well it has gotten a lot larger. This morning I finally saw some small pre flower hairs coming from the main stem. Also the stems in the plant seem to be starting to stench. So 90% sure buy the end of the week the plant will really be showing signs of flowering. Well just saying it’s flowing now. From what I see online this strain takes along time to switch to flower compared to lots of auto flower strains. This would be a perfect strain if you wanted to main line
Likes
12
Share
Checkout my Instagram @smallbudz to see the Small budget grow setup for indoor use, low watt, low heat, low noise, step by step. 27/12/2019 - Fed her 1.5l of 6.4PH water with 0,5ml of each: Grow, Bloom and Max, and 1ml of each: Heaven, Alga-mic and Vera, I use about 1/3 of the nutrient dosage on the chart, to achieve about 200/300PPM (500 scale). 01/01/2020 - Fed her 1.5l of 6.4PH water with 0,25ml of Grow, 0,75ml Bloom and 0.5ml Max, and 2ml of each: Heaven, Alga-mic and Vera, mesured about 280PPM (500 scale).
Likes
23
Share
Bueno, le salió la radícula en las primeras 24h, pero quise esperar a que se desarrollara más antes de transpartarla al sustrato, tras pasar más de 48h me quedé sorprendido que siguiera (aparentemente) igual, la pase a la tierra(💦mojada en el centro con 100ml del agua que utilicé para germinarla), se me hizo eterno esperar a que sacara la cabeza, tremenda alegría al 4 día ❤️🙌🌱, al ver el sustrato relativamente seco volví a mojar💦(esta vez con la mitad, 50ml aprox.). Decidí comer hummus (como ella jijiji) y ponerle el plástico de invernadero con la idea de manter la humedad alta💦💦💦
Processing
Likes
62
Share
***Video Added March 14th*** March 13, 2019 Update: We’re getting to the end of the road here. DinaMed and all three Cherry’s were cut down on Saturday and hanging. The Critical+ and Cream & Cheese CBD are flushing with straight water and will be cut down this weekend. I’ll be taking samples of the DinaMed and Cherry to the local dispensary for potency testing this weekend. Pics were taken both with lights on and lights off. I used a flash when the lights were off. The first round of pics are with the HPS off and the flash on, the second round is with the HPS on and the flash off. I probably won't update this diary again until I have the test results back and final dry weights for all plants - 10 days or so. 🙏 p.s. I'm starting a couple new diaries next, check em out! 👍
Likes
65
Share
📋Summary of previous week During week 5 of vegetation, both R01 and R03 showed solid development, especially R03. A training session was done to open them up and improve branch distribution. R01 has started showing signs of pre-flowering, while R03, being five days younger, hasn’t yet. R02, unfortunately, suffered another setback: during an LST adjustment, its main stem snapped. It was carefully taped and stabilized, but it’s becoming increasingly clear that it won’t be able to keep up with the others. This week, two watering sessions were done: one with 1.2L of water, 1.5ml of Terra Vega, and 1ml of Mycochum per plant, and another with 1L of water and 1ml of Terra Vega. The light intensity was increased to 85%, and the lights were raised a bit higher to encourage more stretching before flowering begins ------------------------------------------------------------- 6️⃣Week flower : 24/03 - 31/03 💡 Light schedule: 21 hours (06h30-03h30) 📏 Lamp To Plant Distance: 85cm ⚡ Dimming: 85% 🌡️ Average temperature: 20,5° ☔ Average humidity: 67% ---------------------------------------------------------------------- #24/03/2025 I decided to make another LST adjustment and I'm starting to consider removing R02 from the tent and placing her on the balcony, allowing more space for R01 and R03, which are now practically filling up the tent on their own. As for the SCROG net, I’ve decided not to use it and will stick with LST until the end. The main reasons are : -I’ve already managed to open up the plants well with LST - R01 is already showing signs of flowering -I’ll be able to handle the plants more freely throughout the contest .. and the main reason , I messed up the measurements for my frame and now need to figure out a way to extend the support pipes a few centimeters to make it fit properly! 😅 ---------------------------------------------------------------------- #26/03/2025 Applied a bit more LST today and decided to give them one last watering with Bactomatik from Agrobacterias, but at a lower dose , just 2g in 3L of water, with one drop of SuperVit to give a final boost of nitrogen, beneficial bacteria, vitamins, and amino acids. I also sprinkled a bit of Epsom salt from THC on the surface for magnesium, and some Basalt Rock from EcoForce, which contains 45% silica, to further strengthen the ladies ---------------------------------------------------------------------- 30/03/2025 Watered today with 1.5L per plant, adding 1ml of Terra Vega by Canna and 1ml of Alga Bloom from Plagron. ---------------------------------------------------------------------- 31/03/2025 Had to make another LST adjustment on R03 — this girl is definitely keeping me busy! I’m completely out of space in the tent, so from now on the only direction left for her to grow is up!💚 I also did a bit of defoliation — something I don’t usually do with autoflowers, but they really needed it. Nothing major, just a few lower leaves and some that were blocking light from reaching the lower branches. Nothing too crazy!!
Likes
146
Share
@EZgrower
Follow
Everything goes according to plan 22 oct 2019 - Day 19 - first small defoliation. cut 7-8 fan leaves. 23 oct - 20 day - 11 colas
Likes
2
Share
had crazy smell when I opened the glass it smelled like two rooms away Very good high more indica
Likes
4
Share
Likes
3
Share
Some plants are still flipping over to flower myb 2 weeks behind the dist Bloomer
Likes
9
Share
Slightly Light amber, but I'm cutting her. She really looks ripe. Also an infestation of sap eaters, so the plant is at it's end. The plant with long stem is not even 48 grams, very disappointing! Very thin flowers. Maybe if I'm lucky, I will have 10 gr 😞😞😞
Likes
7
Share
@Dralph87
Follow
RC#1 is in her last couple days. Main stem is starting to tilt with the weight of the buds 🤣 she was flushed yesturday for the final time with around 15 litres of water. Once the pot has dried out she will be swapped into my drying tent and left in darkness for 3 days before the chop. Feel like this day will never come lol. Very excited to try as this is my first ever grow. RC#2 is starting to swell up but I think she has another 2 weeks in her, she got stunted for a while during week 6-7 so may have set her back a little. Bud sites look great I'm expecting no less than 8oz between the 2 girls, just by what I've sized up already. Well shall see.... 18.03.20 (Day64) Rc#1 has been chopped. Only got a few pics but I'll take them next week once it's all weighed up. RC#2 is starting its flush this week as I think it's only has around a week or so left.
Likes
7
Share
Had a few family issues to contend with so sorry for not updating.. Tbh lost the week am on but she's growing very very well for my first attempt