Likes
Comments
Share
7/24/23 - Day 42 - Ok, so where to start? I'm going to go over the last couple days of issues/troubleshooting. We had an issue with the lights not coming on for a whole day/night cycle. That was a couple of days ago, and everything seems okay since then. I had some Canoeing/tacoing on the leaves once the lights were back on. I think I had the PH too low, 5.8. In flower, I should start moving it up the scale. Once I corrected the PH to 6.2, the canoeing/tacoing in the leaves seemed to be gone/almost gone. I'm REALLY worried about the height of the plant. She is only 12 in. from the light that I cannot move. I added a second scrogg net???? I don't know if that's done a lot, but I'm going to try and stop if from growing straight up. I think the best I can do is give it a lean. So Ill call this the ScoggGL (GangstaLean). You'll see some pictures up top as I start the ScoggGL I did the first big trim and pulled a 3-gallon bucket of fan leaves out. I cut off a few side branches I didn't want the plant to waste energy on. I trimmed so many leaves off it was crazy. The smells have been awesome! You all know the smell of the fresh plant stems and leaves as you trim and rub across them. It's one of my favorite smells, which is in full effect. I noticed that I have some pistils growing. I know what that means, shes going to have some flowers here in the next week. I couldn't be more excited!!!!! The roots are just downright ruthless; they have been growing out of control. I have a great picture of them in there with no water. I should note that I did two things that might have solved the Tacoing in the leaves. It could have been one or the other, but it also could be a combo of both things. I did the trimming to get some airflow between the leaves and changed the target for my PH from 5.8 to 6.2. When moving into flowering, I should have already done that. But I did both things while the leaves were Tacoing, and now they are not. I wanted to make sure I noted that. 7/26/23 - Day 44 - Things are looking great. No more tacoing, she's growing and still drinking about 2+ gallons a day of water. I hope the vertical growth stops soon, I want to remove a ton more fan leaves, and I'm hoping that it spends more time growing around than up, I'm keeping some leaves on just to slow some vertical growth. 7/27/23 - Day 45 - She's sleeping right now, but I will chop some more fan leaves when she wakes up. She's growing too tall, and I need to find a way to stop her. I think shocking her system will help stunt her growth. How crazy is this, what a conundrum I'm in. Normally I stress out trying to find the right time to trim to avoid stunting growth. I always keep my plants busy and do one or two chops. I think they need to grow as mother nature intended. Let them grow and do one, maybe two fan leave chops. That's always been my motto and its always worked out great for me. This is now the exact opposite. Feels weird even thinking about it, doing a leave chop two weeks into flower..... ARE YOU INSANE!!!!!! Lol The 2nd chop has happened. I took a ton of fan leaves off. It's time for the plant to slow down heal and start working on the buds! Let's see how this goes over the next couple of days. I added a timelapse of me chopping her up. 7/28/23 - Day 46 - After adding more water last night, I was checking PH, and I did a quick check on the ppm from the nutes. If it went from 600ppm down to 130ppm in a couple of days. So we decided to give her another dose of nutes so she has something to eat. I'll update you after she wakes up for the day. If you are looking for this experience, check out https://www.getleaf.co/
Likes
10
Share
@valiotoro
Follow
Hello everyone 👋 She grew fast and with a beautiful green colour on the leaves! She has responded superbly to low stress training and topping & i defoliated her aswell and seems didn't even notice 😎 Wish you all a good day and happy growing 😁
Likes
3
Share
Die Pflanze hatte ordentlich durst und hat direkt 10 L bekommen, das sollte erstmal reichen. Zusätzlich wurde sie mit einer hohen Dosis Pflanzengeflüster (Harpin-Protein) besprüht, so früh in der Blüte ist das noch okay, das war aber insgesamt die letzte Anwendung davon. Einige untere Triebe und Blätter wurden entfernt, manche Triebe wurden via Super Cropping "neu positioniert", sodass das Zelt ordentlich ausgefüllt wird. In der Vegi hatte ich zu wenig Zeit um mich ordentlich um die Pflanze zu kümmern, daher musste das jetzt stattfinden. Hoffentlich ist das nicht zu viel Stress gewesen. Eingesprüht wurde die Pflanze mit 4 g / 1 L Pflanzengeflüster, bis sie Tropfnass war. Der Rest wurde auf andere Pflanzen verteilt. Der Drain in der Wanne bleibt und sollte bald aufgesaugt sein - die Färbung davon kommt von der Erde selbst.
Processing
Likes
20
Share
Start of week 2 of flowering, both girls were drooping heavily and the medium was dry and pots were very light feeling. Removed the worst leaves from each plant and a few large fan leaves. Overall, I'm very happy with the weeks growth and development.
Likes
13
Share
Nothing special about this week. Dropped seed into small cell pot of fox farms ocean forest and she took of very quickly. Sprayed medium with water mixed with liquid seaweed and urb natural.
Likes
38
Share
@Roberts
Follow
Fruity Pebbles autoflower growing in Athena is doing okay. She is still showing signs of too much nitrogen at this moment. I will likely do a solution change soon and resove this if it continues. I added water to dilute out the solution some. She is still advancing in flowering. I will fix this soon when I have more time. Everything else is looking good. Thank you ILGM. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
5
Share
@BombBuds
Follow
Erntezeit! Getrocknet wurde 9 Tage bei ~55% Luftfeuchtigkeit und 20 grad. Trocken getrimmt. Alle Popcorn nugs und Verschnitt zu Hash weiterverarbeitet.
Likes
6
Share
@603grower
Follow
These girls didn’t give me any issues at all. They just screw themselves. I planted one seed and when I did the mainline, I cloned the top, which is how I ended up with two plants. I can’t believe how big the buds got all this girl trimming it was a nightmare. There was so many leaves, some of the buds are so big that I did a small amount rot in one of them It’s so happened to be the biggest bud. I was running the humidity kinda high about 60% the whole time. About this plant doesn’t have much of a nose on it but she looks great and Got over these two.
Likes
29
Share
Gracias al equipo de Sensi Seeds, Marshydro, XpertNutrients y Pro-Mix, sin ellos esto no seria posible. 💐🍁: Mr Nice G13 x Hash Plant: Las semillas de cannabis Mr Nice G13 x Hash Plant son 100% Indica. La variedad incluye G13 en su genética; una planta afgana de primera calidad que (según la leyenda) fue sacada de contrabando de un centro de investigación del gobierno por un técnico. Sensi Seeds desarrolló la variedad con el objetivo de mejorar aún más la G13 y el resultado fue Mr Nice, que se lanzó en 1999. Mr Nice G13 x Hash Plant Regular tiene un tiempo de floración de 60 a 65 días. Como era de esperar, dada su genética índica, esta variedad no alcanza alturas significativas. Sin embargo, cuando se cultiva en exterior, no es raro que las plantas alcancen unos 190 a 240 cm. En interior, son mucho más compactas, y la planta media crece aproximadamente entre 80 y 170 cm. Mr Nice G13 x Hash Plant Regular proporciona un colocón corporal increíblemente potente. Es 100 % índica y esto se nota en el efecto de "apagón" que produce, ya que los usuarios afirman sentirse muy relajados y aliviados después de consumirla. Gracias a la genética "doble afgana", las plantas producen un aroma terroso y picante. Este aroma tiene un matiz dulce, rico y penetrante, que se intensifica a medida que maduran los cogollos. Al gusto, es casi como una mezcla de ganja y hachís, ya que es excepcionalmente fuerte y rico. 🚀🌻 Consigue aquí tus semillas: https://sensiseeds.com/en/cannabis-seeds/sensi-seeds/mr-nice-g13-x-hash-plant 💡FC6500: Eficiencia líder en el mercado: la lámpara de cultivo LED FC-E6500, que ostenta un estatus líder en el mercado, es una solución rentable con un PPE de 2,8 µmol/J y un rendimiento máximo de 2,5 g/vatio. Ofrece un PPF alto de 2026 umol/S y es adecuada para una cobertura de vegetación de 1,50 m x 1,50 m y una cobertura de flores de 1,20 m x 1,20 m. Iluminación versátil y uniforme. https://marshydro.eu/products/mars-hydro-fc-e-6500-730w-commercial-led-grow-light/?gad_source=1&gclid=Cj0KCQjw1qO0BhDwARIsANfnkv9IIrYSbmJqz8PqpJOIyWwJfp5bc3SGJgUV68USLQ4tjmXDYwoBuAsaAue3EALw_wcB 🚥 MarsHydro ADLITE UV/IR/RED: Para lograr un crecimiento óptimo de las plantas y maximizar los rendimientos es un arte simple que depende en gran medida de las condiciones ambientales adecuadas. Reconociendo las limitaciones de la iluminación natural y las soluciones de iluminación tradicionales para satisfacer estas necesidades únicas, lanzamos ADLITE. Estas luces especiales UV, IR y roja están diseñadas para llenar áreas del espectro, proporcionando las altas longitudes de onda que las plantas necesitan para un crecimiento y desarrollo óptimos. Consigue aqui tu Adlite: https://marshydro.eu/collections/adlite-supplemental-lights/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 📆 Semana 1 Un comienzo explosivo en solo 3 dias que llevan en floracion gracias a la nueva iluminación de mi patrocinador Marshydro, gracias al Adlite y como no a la gran gama de nutrientes de XpertNutrients. Continuo con las dosis de nutrientes recomendadas por el fabricante, esta vez el olor es penetrante y eso que todavia no tiene desarrollada las flores. En algunos ejemplares se pueden apreciar lindas preflores hembras.
Likes
47
Share
@KA_LE
Follow
- Started this week with a fresh re-pot into a 9 litre air pot and a topping. - She started showing signs from my accidental over feeding last week so diluted my nute mix by half and only gave her about a litre on the day of re-potting. - Worried the plant is looking a bit small compared to other grows at the 5 week mark. - Timelapse looks a bit different this week, iv been messing around with speeds and white balance. Hope you enjoy -next week I will start intense training.
Likes
1
Share
I say 56grams but I smoked like a quarter of the plant by the time it all was dry lol. But this shit stinks. In the dry tent I thought it was moldy and was gonna throw it out I couldn't see mold but God fucking damn it was giving off this strong ill call it odor. Lol my wife said it smelled like loud cheesy bud. Now in jars it smells cheeeeesssyyy af with alot of earthy undertones but not like too dry earthy if you know you know smokes great gets me higher than a mother and made some great butter usedbin cookies and something unknown yet lol. Check my sideways plant out lol
Likes
2
Share
3.23.25 Fastbuds LSD-25 auto #1 Germination 1st week Only watering with spring water. Going to be using foop nutrients with Humboldts secret cal/ mag and nectar for the gods ph up and down! Here we go!
Processing
Likes
39
Share
This is Week 1 of Flower, flipped on Monday (01/04/19).... More to follow as the week progresses #RecycledSystem #PeyoteCookies #Cinderella99 #BlueGelato41 #GorillaZkittlez #BarneysFarm #HerbiesSeeds #FreeSeeds #GrowTent #MeizhiLED #Meizhi300 #CustomLED #UkGrown #TheUKGrowsToo #CannabisCommunity 🇬🇧
Likes
35
Share
@Eryan
Follow
Day 1 Never grown before, but always liked plants. Especially plants like these 😊 Seeds came today. Only one will be grown for now (Bloody Skunk Auto). The seed was slightly scraped (purposefully), and then placed in distilled water. Seed sank to the bottom with a little push after 6 hours. Hopefully that's a good sign :) Seed was then taken and put into rooting medium. Currently lights are on 24/0 to warm the area surrounding the seed. Tomorrow temperature/humidity measurement will be set up. Day 2 Was able to measure the temperature. It's about 22 C. Natural humidity is a bit low in the area (35%), so a humidifier is being used occasionally to increase that. Seed has sprouted now (15 hrs after being put in the rooting medium), maybe in two days there will be some real growth 😊 Day 3 Root looks like it's off to a good start. Positioning seems a bit off though. Will keep an eye on it for the next couple of days. Day 4 There was a surprise waiting today 😁 Plant pushed through the piece of sponge at the top without a problem apparently. The light has been switched to a 125W 5500K CFL, for now without any reflector. A bit worried that this might be too strong, especially for a seedling. However there aren't other 5500K or higher Kelvin value lamps available, so going with this one for a couple of days. If there are problems, will go back to just a collection of 2700K bulbs and hope the plant survives haha. Got a heating pad, so now the temperature is being kept around a comfortable 73-76 F. Night temperatures should drop to around 66-68 F. Lighting schedule has been switched to a 20/4 schedule, to allow for better plant development. Will probably stay with this schedule for the first couple of weeks. Could also see the taproot poking out of the Root!t sponge. Not sure if that's going to bad for this root to be exposed to light at this stage. Once (if) the leaves start to get wider than the Root!t sponge the plant and sponge will be transplanted to a small 1 Liter pot. If the roots continue growing but the plant stays stunted then it will also be transplanted. Andddd....got nervous about the 125W lamp. Decided to switch it out for the previous lights (two LEDs, two CFLs, all at 2700K). Total lux value is about 10000 measured by the seedling. Seemed also like the seedling might have been craving some water, so gave it a few drops. It hadn't been watered since being planted. Hopefully not over-watering here... Day 5 Seedling has grown by another centimeter. Leaves haven't really changed that much. Nevertheless, decided to put the seedling in a slightly larger container. The cup was taken and filled with some potting soil (Compo Sana Anzuchterde) and the Root!t sponge put into that. Did this because the tap root was poking even further out of the sponge and didn't like that. Gave some more water, mainly in the lower section of the soil. Will not water again for a few days unless it seems really too dry. Don't want to over-water 😑 Day 6 Seedling doubled in height. Starting to get concerned about stretching. Read conflicting information about the optimal humidity for seedlings, but most seemed to say that less was better, and a humidity dome not necessary after sprouting. One source suggested that seedlings stretch when under a humidity dome. So that's been removed. Switched to the 125W lamp as well in case the seedling was stretching because of not enough light. Added a fan for a breeze to occasionally move the seedling...hopefully this will make the stem a bit sturdier. First set of leaves has begun to develop a bit more..but it seems a bit slow. Might just be being impatient 😄 Day 7 Not much has changed. Soil is getting to be dry enough where watering again should be ok. So that will be done tomorrow morning, with a small amount of BioBizz RootJuice.
Likes
67
Share
Week 4 Day 1 all 3 plants were transplanted from smaller cups in to 5 gallon fabric pots yesterday and seem to be taking to their new homes nicely, a little bit of leaf curling but I did give them a pretty intense watering. I picked up a bag of Fox Farms Happy Frog potting mix for them now that they are in 5 gallons, hopefully they will be happy in the better quality soil. If all continues to go well with the transplant I will be topping hopefully in the next couple days. I will be trying to manifold at least one of these plants. Week 4 Day 4 All 3 plants seem to have recovered nicely from their transplanting. I topped all three plants today and attempted two clones from the toppings of KBGB1 and Jack Herer, made a mini greenhouse for them out of a tomato cage and some cellophane Week 4 Day 5 I cleaned up all the undergrowth below the third node in preparation to start manifolding.
Likes
11
Share
Another week down a whole week of 12/12 and I won’t say she’s stretching yet, I would have thought ild see son pistols by now but no.i know she’s healthy the cutting I took only took two days to fully root A few new things to add to the list of nutrients, this week she’s had a heavy top dress. Reaper, soil candy, and barley to kick start bloom, grow plus to make sure she has enough to stretch properly and the knf. Which I’ve add fermented fruit juice to now for bloom, Fermented fruit juice - I’ve gone hard to ferment this properly since using shop bought fruits, Bananas for potassium, blackberries and blueberries because that’s how I imagine a moonberry would taste 😂 I know it’s no going to influence the terps but still LAB for microbes and jsm ( leaf mould and potato in water to collect microbes in the water) And finally molasses. This brew took about three weeks. The light stayed the same high flipped to 12 hours and turned up to 75%. She will stay there until the plant reaches 30cm from the light. I thinkkkkk that wraps this week up might be a bit boring from here on out work wise butttt will be exciting watching her blow up, till next week. Let’s get it 💪🏽