Hello growmies! Welcome to week three of An Epsilon Adventure! Week three already! These six ladies were each planted into their final 30l pots, fertigated for the first time, and put under the light two weeks ago. As you know if you have been following, last week I switch to full nutes earlier than planned as I was seeing deficiencies. Those deficiencies progressed quicker than the plants could respond to the new nutrition. To combat this I fertigated them more frequently and with more volume, as you have the option to do in a coco/perlite substrate mix. I have just given them their third full range fertigation after taking todays photos. All in all so far I am blown away by their progress, they are by far and away the most advanced 15 day old plants I've ever grown. I just wish I had started fertigating with everything earlier. I will certainly report back to Shogun that the coco schedule is too slow for the fastest autos. I do not know if there is a record for fastest start to finish result, but if there is this strain needs to compete because it is really, really, REALLY fast. Massive thanks to both Shogun and Royal Queen Seeds for sponsoring this grow. Daily Updates: ### Week 3 Day 1 21:00 9/7 2m/l Start + 2.5ml/l Katana Roots & Zenzym + 1.5ml/l Coco A & Coco B + 1ml/l Zilicon & CalMag + 1m/l PH down - fertigated ~1.5l each In case you are wondering why I am adding start into this mix, it's because my other grows need it still, but I am also starting them on full nutes at 7-8 days to try to avoid the issues you have seen here last week. I decided therefore to just mix one batch up for them all and see how it goes. I really do not think a bit of extra start and roots will bother these girls, but it will make the difference for the others. With a 10l watering can as my only watering tool, part-mixes are highly error prone as I found out last grow series with Queen Citronella and the poisoning incident, and if I mixed up two batches I have to throw most of one away with a + b nutes such as this they don't store for very long once mixed. Anyway the colour is looking better in the new growth and they haven't missed a beat in terms of piling on greenery and height, I think these six girls are going to really put this "50-70cm" claim to the test. ### Week 3 Day 3 20:30 11/7 Photographed. ### Week 3 Day 5 11:00 13/7 2m/l Start + 2.5ml/l Katana Roots & Zenzym + 2ml/l Coco A & Coco B + 1ml/l Zilicon & CalMag + 1m/l PH down - fertigated ~3l each Today for the first time since I planted them up I moved everything out of the tent, and while I did so I inspected and photographed each girl. I found one aphid on one of the plants, which I tried to kill but it evaded my sausage fingers. So I sprayed all 6 plants with Neudorff BugFree. I made the stupid mistake of bringing in a sad little pepper plant for a bit of a boost, I obviously didn't check it. I will keep an eye on it but if the spray doesn't kill them then I will go and find some ladybird larvae. These are all pretty close to each other but I am starting to see two phenos. One is taller the other is thicker. See for yourself! Plants 1-4 are the slimmer/taller plants 5 and 6 are chonkier. I also labelled each plant and will note which plant is which in future photographs as you can follow an individual plant if you like. Anyway these girls are insane . Look at the size and development; 19 days!!!! Tallest is 40cm (plant 1) Shortest is 27cm (plant 6) Lastly, I have been keeping a decent handle on the temps it is now extremely rare for them to exceed 30 degrees unless there is a heatwave, which I sincerely hope there is not. I'll see you in a couple of days to round off this incredible week. ### Week 3 Day 6 23:00 14/7 Photographed wide shot. Really inspected each plant again and I am confident the only deficiency is magnesium. I checked the runoff PH it is sitting somewhere around 6.3. I am going to further increase the CalMag to 1.5ml/l ### Week 3 Day 7 23:00 15/7 Photographed individually. Flushed through with 3l of fertigate with increased CalMag dosage to 1.5ml/l which is now 50% above the recommended amount. I have gone off-piste with the nute schedule... be it on my own head I suppose. Fingers crossed. So the symptoms of the Mg def are on all plants but some worse than others, which has made me think perhaps there was some inequality in the distribution of the reused coco vs new amongst the pots. I suspect that maybe I should have rinsed the old coco first. I have had success with flushes in the past, and considering this issue is relatively minor I am not prepared to take them all out and individually flush through with 30l+. Instead I have overwatered them by about double when they were already fairly saturated so about 70% of the fertigate came through as runoff. Below is my current assessment of the different plants: Plant 1 -------- Previously the tallest plant, now only 2nd she current stands at 57cm tall having put on 17cm in the last TWO DAYS. She is one of the least affected by the Mg def. Her stem is about the 4th thickest. Plant 2 -------- The 2nd tallest plant on day 19 is now only third the tallest plant at 52cm, she also has the second thinnest stem. Plant 3 -------- Around the same height as 3 other sisters on day 19, in the last two days this plant has grown to 58cm tall and is now the tallest plant in the series, as well as having by far the thinnest stem. This girl has put on at least 20cm in the last two days. This plant was the 2nd worst Mg def symptoms. Plant 4 -------- The 3rd shortest plant at 47cm, she has the third thickest stem, and seems to be somewhere between the two phenos. This plant is the most affected by the Mg def. Plant 5 -------- Standing at only 40cm but with a really chunky stem and the 2nd thickest this girl is clearly a different pheno to plants 1-3 and 4. Her leaves are much fatter and bigger and her stem is much much thicker than plants 1-4. Plant 6 -------- Last but by no means least is plant 6, this girl is my favourite, though she is the shortest plant standing at only 39cm tall, she has tight internodes, massive fat leaves, and by far and away the thickest stem I have ever seen on a 3 week old plant. Seriously, seriously chonky. Her stem is approximately double the girth of the 2nd thickest (plant 5). I think this girl is going to be the star of the grow and the highest yield. What do you think? Thanks for reading growmies! 👊 ========== Tent: 120cm x 120cm x 180cm Light: 600w HID Elite Dual Spectrum HPS + Angel Wing Reflector Air: 5" duct fan system with carbon filter ~300 m3/hour + RAM 9" floor fan + 4" intake fan Pots: Air Pruner Fabric Pots 30l - UGro XL Coco + horticultural grade perlite (~20%) Seeds supplied by Royal Queen Seeds https://www.royalqueenseeds.com Nutrients supplied by Shogun Fertilisers https://www.shogunfertilisers.com/en ==========

Zdarec Jedna kytka byla hermáč ,tak jsem ji skosil a ze dvou holek zbyla pouze jedna😭 . Díky Hombre za radu, mě to vůbec nedošlo, že ta pálka je už oprcaná.🤦 Ještě před tím než jsem tu kytku zlikvidoval, tak jsem ji na ukázku natočil - viz video. Škoda jí, byla pěkná a mohla mít pořádné štangle. Zbylá kytka už má za sebou čtvrtý týden květu, tak už dostává také PK v podobě Hammerhead od Advanced Nutrients. Snad už nebudou žádné problémy a dojedu tenhle grow v klidu do zdárného konce. No nic to je zatím vše, tak zase za týden zdar a ať to roste 🌿😎

Promoting Mars hydro fc3000 honeslty everyone whouses this light will tell you how deadly it is I germinate my seeds in the soil u this ligjt and have 100% success rate

Veg week two. Everything seems to be ok at this point.

Start of week 8 (week 7 feed for the super Lemon Haze, she's going one extra week in total (9)) th blueberries are packing on serious weight, size and stickiness, while also smelling dank as hell! The Super Lemon Haze is still nutrient hungry, I continue to feed her extra each week and she's packing on serious weight and size now as she goes into the last 2 weeks of her grow. Overall the last week 7 was great and the plants are looking good, approaching the end.

Tops rock rock hard .had to put strings cos they was falling cos of the weight. I think is comimg to the end and stressing me out cos first time doing it .dont wona start to flush to early ....any help would be much pri...started looking at the trichomes every day now

So this round I just lollipopped and didn’t strip the top at all, with better veg next round it’ll work better but I’m having issues with some plants not quite trellised how I’d like. Everything smells great, BCS,BD and WM are getting fat and PKB is frosty and tight. Watering is more of a chore than I’d like I think I’m just going to use some 5s for the next round . Thanks for following along I hope your buds are fat and frosty.

The cannabis strain Grape Guava can be a purple strain, depending on its specific phenotype and genetic makeup. While not all phenotypes of Grape Guava are purple, some variations, such as the Zatix Grape Guava, are noted for their striking purple appearance due to the genetic expression of anthocyanin pigments. https://www.youtube.com/watch?v=cKdVmdoKJ5k In a garden of green, Grape Guava gleams, With its fruity aroma, enchanting dreams. Clusters of grapes, guava's sweetness ignite, A strain so divine, in purple and white. Euphoria whispers, a lush fruity haze, Grape Guava's embrace, a tranquil daze. Off and away.@1400ppm. The increased CO2 allows plants to thrive at higher temperatures, which in turn necessitates higher humidity to maintain the ideal VPD for healthy growth and transpiration. 80F -5F = 75F LST with 70% RH = 0.72 kPa. Higher temperatures and humidity promote rapid growth, nutrient uptake, and photosynthesis while maintaining a lower stress level. Temperature influences the rate of enzymatic reactions involved in aerobic respiration. Enzymes, such as those involved in glycolysis, the Krebs cycle, and the electron transport chain, work most efficiently at an optimal temperature range. In low temperatures, enzymatic activity will slow down, thus reducing the rate of aerobic respiration. In high temperatures, enzymes can become denatured, thus impairing their function and stopping the process of aerobic respiration. Glucose is the primary fuel for aerobic respiration. The rate of aerobic respiration increases with the availability of glucose, as it is the starting point for glycolysis. If glucose levels are low, cells may rely on alternative energy sources such as fatty acids or amino acids , but these processes may yield less ATP or be less efficient. To determine this effect, carbon dioxide volume was measured (as carbon dioxide is an output of aerobic respiration) 18/6 with the 6 being IR. The near infrared (IR-a) borders around 700nm up to 1400nm @ photon par flux density of 1.8 instead of darkness, keeping temps overnight a neat 77F-80F. Think of my tent as a lung. What goes in must come out. When the rate of air going out exceeds the amount of air coming in, it creates a negative pressure. Tent concaves (bends in). If set up correctly, your RH will begin to drop slowly to the desired level you set, and the extraction turns off when it reaches desired% RH. The plant, as it performs cellular respiration, will always be releasing more water into the air, so the RH% of the tent overnight will always increase, so long as oxidative phosphorylation is occurring. As soon as the RH% creeps back up to 55%, the extraction turns back on, over and over. This creates a strong pressure differential which will work wonders on your grow. Replicating high and low-pressure fronts in nature. Critical for oxygen diffusion at the critical time of peak cellular respiratory function.. Moisture will not transfer from a saturated atmosphere to another if that air is already at or above its saturation point, meaning the air can't hold any more water vapor. Once I understood that water is produced as a by product during cellular respiration, specifically at the very end of the electron transport chain (ETC) where electrons are finally transferred to molecular oxygen, the higher the RH of the air, the more resistance there is for more moisture to be added to that environment, and effects the ease with which it does so. But none of that water comes from the pot; it's pulled from the air. If you run high daytime RH, your medium/pot is 100% reliant on transpirational root pull to move water. ZERO evaporation happens across the atmosphere if the tent air has high RH%, the medium cannot release its water through evaporation. Once a canopy develops, light no longer slowly wicks and evaporates from the topsoil. The Soil-Plant-Atmosphere Continuum (SPAC) describes the continuous pathway and process of water movement, driven by a gradient in water potential, from the soil, through the plant's roots, stem, and leaves, and finally evaporating into the atmosphere through transpiration. There is evaporation, there is transpiration, and then there is evapotranspiration; Evapotranspiration (ET) is the combined total of two processes: evaporation (water lost directly from soil and surface water into the atmosphere) and transpiration (water released from plants to the atmosphere through their leaves). Evapotranspiration represents the total amount of water that moves from the medium into the air. There is no such thing as a medium with too much water, only a medium that retains too much for too long. The water must always flow efficiently from one atmosphere(Medium) to another(Air) in a timely manner. Moisture is a critical factor for bacterial growth and decay. Dictating how long it's allowed to sit in any one location for any given period is a key preferred control. To ensure a net reduction in a bacterial population, the rate of removal (ET) must exceed the rate of bacterial growth (decay rate), which is often modeled as a growth rate for the specific bacterium under the given conditions. By optimizing daytime VPD, we also optimize conditions for bacterial growth to explode exponentially above 77°F.. If water is allowed to sit in a medium without an escape within a timeframe, nothing good will happen. IF High RH is maintained overnight as well as during the day, placing 100% of water movement at the behest of daytime transpiration, roots can only pull where they can reach, and if soil is compressed above a certain point, moisture will become trapped in a medium with no way of moving day or night. This will begin the countdown for decay to take hold. When water stagnates in a medium, it loses oxygen, creating anaerobic conditions that foster the growth of harmful microorganisms like bacteria and fungi, which can produce toxins and disease vectors. Thigmomorphogenesis, the process by which plants respond to mechanical stimuli like touch by altering their growth and development, results in significant morphological changes to improve survival against mechanical perturbations. This complex response involves sensing touch and initiating physiological and genetic responses, leading to changes in form and structure over days or weeks. The process is triggered by physical forces such as wind, rain, or touch. Plants adapt to these stimuli by changing their shape and structure, which may include slower growth, thickened stems, or altered leaf development. Plants possess sophisticated mechanisms to detect even subtle mechanical stimuli and initiate responses. A variety of molecules, including calcium ions, jasmonates, ethylene, and nitric oxide, are involved in signaling these mechanical inputs. Touch can induce the expression of genes that encode proteins for calcium sensing, cell wall modification, and defense mechanisms. A plant exposed to constant wind may become shorter and sturdier. A plant that is touched frequently might grow more slowly to conserve energy and develop thicker cell walls. These changes increase a plant's resilience and ability to survive in harsh environments. Let's get Thiggy with it.

Sponsored by: ⚖️HUMBOLDT SEESDS⚖️-💡VIPARSPECTRA💡-💐GREEN BUZZ LIQUIDS💐-🛠️WEDRYER🛠️ 8/7 After several days of Growdiaries making it difficult for me to write and respond to comments, I found that I can still update the journals. I apologize to everyone for the non-replies but I have replaced the main email and the email to confirm the account never arrives, and Growdiaries' customer service seems to be non-existent. 10/7 everything is going well, nothing special to add🤘🦄 12/7 it grows very fast, within two weeks I hope it is ready to clone __________________________________________ Personal advertising (contains affiliate links) __________________________________________ 🦄 Highly professional graphics and website, one-of-a-kind genetics, and a legendary story! Anonymous shipping! ✅https: //bit.ly/HumboldtSeedsCompany __________________________________________ Did you know that Green Buzz Liquids fertilizers are 100% vegan? A complete line of products ready to give the best to each of your plants! Visit the site and see my journals to see how they work 🦄 🤯 And with the code "dreami t" you will immediately receive a 15% discount on your purchases ✅https: //bit.ly/GreenBuzzLiquidsPro __________________________________________ 👀 Are you looking for a good lamp to start with? 👀 🌞Viparspectra has something more than the others, take a look at their site. ⏩ Use "GDVIP" for an extra discount or "DREAMIT3" for an extra 5 %% discount 👀 Search for it on Amazon ✅Amazon USA: https://amzn.to/30xSTVq ✅Amazon Canada: https://amzn.to/38udUVe ✅Viparspectra UE: bit.ly/ViparspectraUE ✅Viparspectra USA: bit.ly/ViparspectraUS ______________________________________________ 🌈 Tired of blowing on your weed hoping it dries quickly? Check out the Wedryer website! You will find a well-made accessory that will help your weed dry in just 8-10 days without the annoying risk of finding mold or other annoyances! (no affiliate links) ✅https: //bit.ly/Wedryer_ ______________________________________________ 📷🥇Follow the best photos on Instagram 🥇📷 https://www.instagram.com/dreamit420/ Backup https://www.instagram.com/dreamit4200/ 🔻🔻Leave a comment with your opinion if you pass by here🔻🔻 🤟🦄💚 Thank you and good growth 💚🦄🤟

Welcome growers And also the week n°3 of veg. is finished for this young AYAHUASCA PURPLE 😈 She is the little girl of the garden, but in terms of health and growing vigor she is no less than the other girls 🌿 About five days ago I have transplanted into a 3l plastic pot.. Usually my choice of pot is the smartpot or the airpot 💯 Since the aeration of the substrate will be less than in my usual growing style, due to the choice of the pot, I have chosen to use a greater quantity of coco coir in the substrate.. I have mixed around 50% of light-mix soil (Canna professional and Biobizz), a 30% of coco coir (Atami), 10% worm-cast or humus (Atami) and around a 5% perlite wich it's already present in the light -mix.. I have also put a few micorizzae (Micosat F), like 10 grams, in direct contact with the roots and around 4 grams of Microlife (Bionova) in pellet form I will use this last one also for making an areated Tea, but during flowering.. About nutrients 👇 In this week i have giving their always organic/veganic nutrients.. Root-Juice (Biobizz) and Rizostimo (Biomagno) for the last time, plus a little bit of silicium (Bionova) and then Activator (Biomagno) / Crescita (Biomagno) / The Missing Link (Bionova) / X-Cell (Bionova) {This last two i have used in a foliar spray solution} Simply a little bit of everything at any watering 💧 About the lights 💡 I currently using for the first time, two Mars-Hydro SP3000, running at 25% of the power for now.. Next week im going to increase at least to 50% ⬆️ Onestly this lights looks pretty solid, definetly intense, with a spectrum really close ro the sun light One of the cool things about it it's that you can connected each one toghter with a cable and so you can controll the intensity of the lights very easy, in a precis way 👌 We will see in this months how they works And that's pretty much everything.. Easy times for now.. Soon the best part will begin.. See you next 📆 Thank you so much for stopping by 😎👍 FC ✌️ 🇮🇹

The flowering is going great, next time i grow her in coco soil is hard to maintain the ec

This week we top

Looking good height wise. But humidity is high at 68% and she is getting blackening / darkening of lower leaves that continue to fall off.

Very late post cause I was moving Houses 😩

Day 1..........

Week 1 from germination! Fastbuds - Wedding Glue Light cycle: 18/6 Watering when dry Light: ViparSpectra XS2000 at 50% Everything is going well thus far! Excited to see how she grows! See you all next week

I took everything out of the tent and disinfected it again. The pots have made the tent base into a ball 😅 The velcro tags fell off long ago. I decided to put some new ones on. I have some wider velcro that I would've preferred to use, I have misplaced those. Anyway, these will have to do. I also made some large pot markers to velcro to the pots, too. I figured it would be easier to recognise the plants in photos if I made some. I laminated them, then attached the velcro to the pots and pot markers. [I get bored] 😅 make everything as fun as possible 💚 I ended up finding some sticky back velcro rolls. Of course, there's no way that it would stick to a slippery surface that gets wet from humidity. So, I used my glue gun and added strips to each side of the tent liner and tent walls to hold ot in place. The 8 gallon pots are very heavy after being watered, and the liner has suffered. Hopefully, this will work to keep it in place, at least for a while! 😅 7.5.25: I also had to clean my pots, as you can see in the photos (if you want, lol). They had got very mouldy/mildewy/fungussy. 🤢 also the under side of the tent liner. So it was very lucky that I decided to clean it at this point. Or else I could have serious issues. I'll look into the ventilation as I'm not exhausting the tent because I leave the door open with very strong airflow. I did spray the plants with Trace, and I used a lot of it. So, that probably ran down the walls into the base of the tent before it dried 🤔 that could have easily caused it. I'll have to make sure I dry off the walls after I use it next time. I certainly don't want to keep cleaning everything. The plants are delicate, and unfortunately, however I try, it appears I am not. I'm always snapping branches off by just watering, let alone removing them from the tent to clean! 😅 you can imagine. Accidental defoliation? 😉 I also cleaned the light, but I have noticed on one light that there are brown spots, which won't come off without damaging the LED's. I really don't want to have to buy a new light. The par isn't great for full flowering. I just can't justify buying a new one right now, as I've already bought 2 in a year. The light has been turned up to 100%, gradually, over the course of a few days. It has been fairly warm so I moved them further away too, as i don't want them to get heat stress, as I have already noticed a few leaves canoeing and having a taco on my dime! 🤨🤔😅 I'll continue to monitor and adjust again when possible/necessary. 9.5.25: Hulkberry has certainly started her stretch! I'm really low on space to train her out, and the light has been turned up to full power. She has begun to drink more, and I gave some more dechlorinated water PH'd to 6.4 with ♡ 1/4 tsp of Greenleaf nutrients Sea K(elp). PPM: 800 PH:6.4 I am very pleased with the recent growth spurt, so let's hope I can accommodate her! 😅 9.5.25: It's a necessity to keep the soil moist. That means I need to water more often now. Today I watered with 1.5 litres of dechlorinated water PH'd to 6.4 which contained: ♡ 1/5 tsp of Sea K(elp). By Greenleaf nutrients ♡ 1/4 tsp Ecothrive Biosys. PPM: 564 PH: 6.4 12.5.25: Hulkberry was very dry, surprisingly. Although I guess I've been giving her less. She was fed with a high dose of Ecothrive Trace: 7ml/7l. She was fed with 6 litres over the course of the day. PH:6.4 PPM: 515 I had added this as a foliar spray last week, and it has apparently damaged some leaves. Left some dry orange patches in the leaves. So, having that happen makes me want to just water with it. Thanks for checking out my diary and hanging out 💚 ✌️ 🍃 😊 🌱

Day 66 day 21 of flower. Front right is do sweet dos. Lights 12/12/ par 900/ co2 500 ppm/ temp 22-27 night 19-21/ organic soil/ technaflora nute/ water ppm 1400 ph 6.5/ 4L per plant Week three of flower is done power went out so I kept the light cycle going with a flashlight lol. This strain was described as little potent popcorn nugs and that’s exactly what they look like. Also included a video of my setup! Looks like there gonna be juicy