right side black domina left side acid dough i think the dough gonna give a much better result good grow still i guess

Really looking forward to harvesting this girl. Trichomes and Terps are showing up nicely - very fruity - not detecting pineapple yet but really nice. On the grow - I can definitely see how it is not a nitrogen hog - actually would change the nutrients next time around as she’s darker than I would prefer at this stage so I’ve scaled back the nitrogen. Anyway - What started off as a really small, runt of a plant has blossomed into this magnificent 2 foot tall solid bud - not really bothered that I didn’t get time to top + LST

Last week! Today 06.11.2020 - i will cut them on saturday and will post the results as soon as possible. Look how hard i burned one plan :( BUT! the buds are not affected, leaves only. Next time i will take more time to look to get better results. I hope you enjoyed the diarie. Keep watching. I update weight etc before and after drying and curing. This is the most beatifull part :) because after this comes the smoke...

I started feeding liquid nutrients this week. Although I’m using Nature’s Living Soil Super Soil Autoflower Concentrate mixed with Fox Farm Ocean Forest—so technically I could water only until harvest—I decided to begin liquid feeding in Week 3 at half the recommended dose. I also have a Tray2Grow Autopot system for automatic bottom feeding, but I haven’t activated it yet. When using liquid nutrients via top feeding, I’d need to turn the Autopot system off and wait until the plants absorb all the water in the tray before feeding from the top. Afterward, I’d have to manually turn the system back on. That seems like a hassle compared to just hand-watering and feeding. I could technically add the liquid nutrients to the Autopot reservoir, but that somewhat defeats the purpose of the system. The tank holds 25 gallons—enough to last a few weeks—but if I want to change or rotate nutrients weekly, I’d have to dump the remaining water and remix the solution each time. If I wanted to feed nutrients every other watering, I’d be changing out the tank every 3 days. Plus, liquid nutrients can cause buildup, so I’d need to clean the reservoir and all the tubing regularly. For now, I’ll stick with hand-watering and top feeding. I’ll only switch to the Autopot system if I need to leave town.

Beginn 3. Blütewoche Ausser ab und zu zu Entlauben wird noch nicht viel gemacht. Ende der Woche werden sie dann soweit für die restliche Blüte fertig gemacht (lollipoping, entlauben..). Bisher entwickelt sich die 3 recht gut🥀👍 Und beim entlauben kommt einem schon ein leichter Duft nach grünen Äpfeln entgegen Tank reicht im Moment noch knapp eine Woche (mal gespannt wies in der vollen Blüte ausschaut). Außer ein wenig Phosphorsäure damit ich ca. bei 6.3-6.5 Ph bin, kommt nix dazu.

Very big plant

Good yield,good terpprofil on Both phenos Crazy trichome Productions! I will Look what she will she will do it i dial her in in a next run,theres so much potential in this genetic!

Very happy this week as my friend gave me a female Mac x Purple Punch he was using as a mother plant. That is in an 18 litre soil pot. The 3 Rado Z are now in 15 l autopots fitted with airdomes. A soil mix was made with dutch vega bio soil , Bio grow and silicium flash. The MacPunch I have stripped the lowers and trained it using easy bend clips.

🙈

Hey folks, I'm finally back at it again. It took me a while for a couple of reasons: 1) I usually only grow in the winter. 2) I completely revamped my grow room after the issues I ran into with the last setup. 3) It took me a while to brainstorm exactly what I wanted to do. I bought these seeds from D.C. Seeds and was very pleased with the experience. I'm very happy to give business to a fellow American and Veteran. I've only ever purchased seeds from the UK in the past and that experience has been "dodgy" to say the least (not the vendors fault, but the transit). I've only ever grown photo's, but chose to go with all auto's moving forward. After calculating the intensity of my current light, with it being on a 20/4 rotation I'm very close to hitting 40 moles per day, at least directly under the light. It doesn't quite cover my 2' x 5' trellis. I'll eventually upgrade my light, but auto's should get me the best bang for my buck with this light. Also, I spent a pretty penny building this new grow room. The other obvious reason for growing auto's is their shorter seed to harvest time. I've got a small grow area, and never plan on expanding. Theoretically, auto's will allow me to produce the most out of my room. A few things about my grow room: 1) I lined the whole closet with 1/2" plywood and put that piece of ply the air intake/outtake/power as the divider between each side of the closet 2) The grow room itself has ply on all wall surfaces so I could mount stuff to it and paint it 3) The other side of the closet is my storage/prep/power distribution/etc. area. Maybe I'll take a pic one of these days 4) My last grow my carbon filter/fan was venting into the other side of the closet. This created a headache for a number of reasons. I tapped a 4" hole through the floor and am now venting into my crawl space below the house. 5) I moved to bubbleponics to speed up my grows even more. I will be removing the drip system once the roots hit the water in the res. 6) The larger res. will hopefully make my life much easier. Late in the last grow I could only fit 3 gallons of water in the bucket and that sucker was pounding down at least a gallon a day. That required too much micro-managing for me (both ph and refills). 7) I no longer have a fixed trellis with chicken wire. The trellis is held in place by dowels that I can pull out by hand. The short sides of the trellis have hinges on the bottom, so I can fold it and pull it out easy-mode. Lastly, I'll be using string for the trellis so come harvest all I have to do is cut the string instead of dealing with trying not to destroy buds pulling them through chicken wire (it takes forever). 8) I built a light diffuser on the other side of the air intake 9) My res. is on a motorcycle lift I'm using a drill to move up and down I have now started using Jack's as my primary nutes. They tell you the full break-down of each macro and micro nute, giving me more control and understanding. I think House & Garden is a good product, but when stuff goes bad it's more difficult to troubleshoot when you have no idea what each piece of their full lineup contains. I'm assuming it's kind of a proprietary type thing, which I understand, but knowledge is power. I am still using their Drip Clean (while the bubbler is going) and Roots Excelurator Silver, both excellent products. I'm still using Hydroguard, and will FOREVER. I'm a true believer now of why Hydroguard is necessary for any hydro application, IMO. I also purchased water soluble fulvic acid, but have decided not to use it for this grow....or at least while the bubbler is going (I'll elaborate below). Ok...now that all that is out of the way.... I really wanted to use my well water instead of R/O to make my life easier. Soooo....I filled up my res., and put two seeds in the system immediately. Nothing happened after 1 1/2 weeks. I finally opened up the cubes and saw that the beans had popped, but it looked like maybe I drowned them, or they ddin't grow straight up or something. For round two, I didn't change the water out, and decided to soak the beans for 24 hours in R/O water first. I had the exact same problem. I'm still not really sure what happend, but I suspect it was the well water. My PPMs were sitting at ~500 with the well water, which was probably too spicy for the beans just starting. Also, my well water is questionable (even though it's at 165ppm), but I won't elaborate further....it's a long ass story and I've spent an absurd amount of money on it. Lastly, I did put the Fulvic acid in, and it was very messy. I really want to avoid having to clean my res. Once the roots get big it will be a real pain in the ass to clean. I'm leaning towards not using the Fulvic acid this grow just to see how things go. I had 10 beans total of the Sour Apple and have already ruined 4. So here's hoping third times the charm. So, I went back to my tried and true method: 0) R/O water for everything. Ditching the well water idea. 1) Soak beans in R/O water for 24 hours 2) Paper towel method between plates on a heating mat 3) Once the roots pop, I place them pointed down in the hole of the rockwool cube 4) Hand water once a day by dipping the cube in the pre-mix of 1/4 strength Jack's and everything else I've listed above. This put my PPMs at 300...a way more reasonable value for starts. It's been exactly 7 days since I followed the above. It's probably hard to see but the cotyledons came up, and multiple roots have come out the bottom of the cubes....way faster than I've ever seen since I started growing. That means even though I'm doing my old process this already shaved at least a week off of when I'd normally put it in my bucket in the past.

Leistung der HPS Lampe von 400 Watt Blühtewoche 1 auf 450 Watt Blühtewoche 2 erhöht. Stärke der Umluft etwas erhöht. Bei allen 4 Ladies an Tag 11 nach Einleiten der Blüte Superscropping und entlaubt im unteren Drittel der Pflanzen. Schwankung im PH Wert zwischen 5,7 und 5,9. Schwankungen im EC Wert zwischen 0,7 und 1,0. Temperaturunterschied Tag zu Nacht ca. 4-5 Grad Celsius. Luftfeuchtigkeit Max in dieser Woche bei 60 % , dieser wird jetzt gesenkt. Keine Mangelerscheinungen, Wachstum gut. 3 von 4 Pflanzen wachsen gleichmäßig, 1 Stk ca. 10 cm kleiner. In Woche 3 wird der Spreader nun auf weit gestellt und die Leistung auf 500 Watt erhöht. In Woche 2 wurde der Befeuchter aus dem Zelt raus genommen und durch einen Entfeuchter für die Nachtphasen ersetzt. Angabe CO2 mit Mittelwert aus Frischluft , da in der Tagphase (Nachts) eine dauerhafte Versorgung mit aktiver Zuluft erfolgt um co2 zuzuführen und den Raum zu kühlen

Performed as advertised, some bud rot bear harvest on #1 but two weeks of fog 8 hours a day will do that. Although in saying that, #2 had zero rot or WPM, so that's pretty impressive considering the season IMO. Harvested after 7 weeks flower, but they were showing reds and wanted to avoid any more issues due to crappy weather. Harvest totals Plant #1. 295g bud and 270g trim Plant #2. 476g bud and 200g trim All fan leaves were removed before drying so trim is mostly sugar leaves packed with THC. Great for hash 👍

Week 8 today started flush yesterday tricholmes still milky so maybe flush a week 2 max then harvest. Looking alryt could of been alittle bigger but looking grade A.

10/28 - Topped middle cola on both sides - tied down outside bigger stems - heavy nute feed - top feed of worm castings on to coco - Increasing nute feeds next week

Tho flush is complete,now I’m going 24/0 for the last days and then i harvest

I am more than happy with the Strawberry Gorilla from 420Fastbuds This is my first attempt at hydroponics, but it's going well. The plant grows incredibly quickly. I made her a new and stronger nutrient solution. The PH rose to 6.5 over the last night. I check once a day. Now the PH value is back to 5.7. If you have any tips, criticism or anything, please write to me!! On the 20th day I started with LST and used Plant Trainer. I'm still thinking about topping her.

This week saw an increase in flower sites and the start of the bud formation. Really good to see her take her strides. I have been mixing GHE Flora coco series and following dosage for 15L but using 20L of water so almost 3/4 of recommended dose and found that it was dialing in nicely. Included calmag from GHE starting this week to give extra dose of calmag since growing under LED lights.

Quick germination time, 48hrs. Paper towel method. All 9 seeds germinated with no problem. Video is 5 days after planting