This is week three miss marked the first week

The Stretch ist really strong now. Just removing a few leaves here and there. Big defoliation coming in week 3. Switching to Canna flores now. Slightly reducing the Nitrogen. First pistols coming up. Light 8/10 by 60cm above cannopy. Temp ~ 25 Celsius RH ~ 55-65 The Lemon orange growing tall with big internodial space. The Blueberry Pancakes rather bushy with lots of leaves and shoots. All plants looking very good and are settings Up for the Flower Phase

Just waiting patiently for her to show up! Happy growing everyone Blessings and thanks for your support

Ciclo di crescita molto disastroso e tra varie genetiche la più resistente e stata lei , anche se per un 27% di thc la sento un po leggera .. forse la causa sono stati propi i vari stress. PS cresciuta per tutto il ciclo a circa 22 gradi in media con molta umidità. Consigliatissima specialmente per i principianti come me !!! Se ti piace lascia un like !

Apple Fritter developed some CalMag deficiency when I used a different fertilizer, so I'll stick with B'cuzz for this round.

Transplant is very close, in a few days she'll be resting in a 10 gal fabric pot ! Unfortunately, a glitch in the page erased all the comments I have been recording here during the past days :( This is Day 44 (24/10/2019) and she looks well recovered from the very many toppings yesterday. Day 45 (25/10/2019) I inserted the plant's small plastic pot into the coco/perlite mix of the big pot to create a niche that fits perfectly for the rootball when I remove the plastic pot tomorrow; spraying the niche with fertilizer solution and root excelurator may help. I hope she'll never realise she has been transplanted. The run off EC from the big pot is 1000 uS/cm and pH about 5.8. I had to perform some operations using tape because the stem near the tip snapped and below the crack, I saw lacerations caused by the twist tie, those need to be fixed right now. Day 46 She's transplanted and the scrog net set up. I'd say that now the journey begins. Day 47 I fertigated by 5.30 am because I had to spend all day working and on Day 48 back to normal, morning fertigation and a little supercropping. The plant has recovered fully from transplant (if she has been ever stressed during the procedure). From now on I'll be fertigating once a day with a liter and a half fertig solution to get a 20-30% run-off. Also, I fertigate other vegging and blooming plants with the effluents I collect.

The first Glookies and Permanent Marker Auto seed went dormant. I had to germinate another one. Glookies 3 days old Permanent Marker 7 days old 1 l of reverse osmosis watering every 3 days

Day 79 since seed touched soil. Found some bud rot on other strains yesterday, so made early chop for #2 and #3. Both needed time, #2 needed like 3 more weeks, would be huge ;))) Day 112 since seed touched soil. last one is done. Ganja Farmer 2024 project is over. Happy Growing !!!

Día 78:

26-11-2022 Awesome start she is ripping it up in fast growth right out of the gate. Always did like a Lemon lol. Starting off with a small deep water culture 2 gal with airstone. Going to make it a lot easier to just pass her into the Aeroponic envirnment. Less shock and gives me a chance to put her in a 5 gal bucket with clean fresh temperater adjusted water prior to her switch in a few weeks. She's got her first wings!😎 1-12-2022 The problem free grow so far she grows as she should. Her primary leaves are getting larger Qucikly. I up'd the wattage on the lights now at 80%. 😎

Week 1 of the latest cycle and starting out with some new hardware and an expanded grow print👍. We’re running 4 autos via a recirculating Dutch bucket system. First time on a dutchy so it’s gonna be interesting to see how it stacks up against DWC. I’ll give a full rundown on the system I’ve cobbled together on the next update. So far - all seedlings have germ’d without issue using the standard p-towel method. Why more people don’t use this method on GD is beyond me. It’s so reliable that some breeders even warranty your seeds if you use this method and more than 1 seed fails to crack. We’ve got little sprouts coming up now and it’s all just waiting for those first couple fan leaves to come out and those roots to run to the bottom of each bucket. They’ve been placed in root riot cubes (essentially a version of rapid rooters) like most of our runs and I’d recommend their use with all autos. Time and stress on young autos is key so they need the absolute best start you can give them👌. End of week update - looks like we got 4 quality little seedlings here👍. Alls good other than battling a ph issue for most of the week. Keeps spiking overnight for no real reason - hopefully it’ll even out and isn’t the early sign of a major problem🤞. Background The strain line up on this grow is look’n quite saucy 😈. We’ve got 2 FB strains this time around - Gorilla Cookies (seems we always have some GSC cross in the works). Mainly because the colours look stellar and remind me of a sugar breathe we did last year that was 🔥. The other FB is their original Cheese strain... because we already smoked all our cheese... and we really like our cheese...😉. Emerald triangle was kind enough to include a freebie of Lemon Haze. Wasn’t really big on the list but we haven’t done a haze strain to write home about yet so worth a go👍. The last is a Cherry auto from Bomb seeds that we’ve been trying to get to for months. Let’s just hope that she’s not a dud like the last bean. The new digs for this run are courtesy MarsHydro👊. Their 2x4 single grow tent, paired with a shiny new 240w QB courtesy ViparSpectra. These folks were kind enough to discuss a collaboration and as a result, here we are to test out the gear with an inaugural run of autos. Each week, we’ll try to expand on some of the benefits of each, as well as any limiting factors or considerations that need attention when pondering purchase. Already I can say that both are high quality products in terms of overall craftsmanship. MarsHydro 2x4 Grow Tent: Excellent construction in terms of durability. Reinforced stitching on the zippers and corners ensures zero tearing. Conveniently placed screen vents and intake/exhaust ports. The ceiling exhaust port only exists on the right side. Perfect for me but not great if you’re running exhaust from the top on the left side (left side wall port makes up for this however). The aluminum frame is rigid enough to support the weight of the lights and accessories. Once you have some weight in the tent, she’s go’n nowhere and you can assemble and break it down in record time if moving or stashing the grow op. Only limiting factors I’ve noticed is that temp. Control will be an issue for a tent. It just doesn’t have the same insulating ability as a wood cabinet or other permanent enclosed space. No worries, this is offset by a small desktop heater and keeps the environment exactly where desired. The other issue was a production problem - the ceiling vent was accidentally stitched into the corner seams on the assembly line. Again, no real issue - just pulled it out with no damage or fraying to the tent or port👍. Website link here: https://www.mars-hydro.com/grow-tent/buy-mars-hydro-grow-tent-24x48x70-2-x-4-cabinet-closet-grow-box-upgraded-diamond-1680d-mylar-for-sale ViparSpectra 240w Quantum Board: This thing is sleek and slick in terms of design. Closest comparable to it that I’ve seen would be spiderfarmers line of qbs. They feature the same top-o-the-line components and roughly similar spectrums. Where VS takes the advantage is in the convenience of the dimmer nob which is easily accessible and works great at 50% with no strobing👍. The heat sink is also larger which contributes to lower temps. That’s not a good thing in my case but beneficial for most folks. I can already say that this will be a great fixture through all stages of growth. Where I know this light will excel will be in the veg. Stage for sure. Dimming function gives seedlings a much better chance of success with the ability to use lower lighting levels early on and the coverage area on a 240w is great. The average grower will find this panel suitable and fitting to their needs in a 2x4 grow space although I’d suggest 2 units if going any larger than that. The total output in this space equates to about 30w/sq.ft. Which is a decent amount of coverage based on power vs. Growprint. Ideal for veg. Certainly but, in flower - I tend to run closer to 50-60w/sq.ft to achieve higher yields. Again, similar fixtures have performed admirably in the past and while this wouldn’t be considered an “entry-level” fixture, I’d recommend that any grower new to the game not skimp on lighting and start with one of these. The price points are a great value for quality LED tech. These days, so there’s little reason to even consider a lesser fixture👍. I have no detail on limiting factors for this light as yet but have heard that stock branded fixtures don’t necessarily incorporate enough red diodes. I’ve seen no issue myself but confess - I’m no lighting guru. Website link: https://www.viparspectra.com/collections/xs-series/products/xs-series-xs2000 ***8% discount when using code: “ItBudWhisper”*** Happy to have you along for the ride if you made it this far through my opening rant!!😎🤟😎🤟😎

~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ ❤️💡🌱😽💨 Week 4! We're about 1/3rd the way through flower..these girls are getting really frosty for their age. There's still some yellowing from almost killing them 1.5weeks ago but they've almost full recovered from our neglect. Nodes have a great distance, its growing similar to our White Widow under the SP-3000..I suspect long 6 long colas on each plant a couple with some side growth we decided to keep. Not too much else to report, we're still babying these girls after our blunder but they seem to be on track now..Thanks for dropping by and happy harvests everyone!! ⚡Mars Hydro/SP-3000⚡ Specifications ⚙️: Diodes: Samsung LM301B / Osram 660nm (960 total!) Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V) PPF: 824umol/S ☢️ PPE: 2.8 µmol/j 〰️〰️ Lifespan: 50k+ hrs ⌛ Weight: 10.1 lbs (4.6kg) Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 -The SP-3000 uses an aluminum heatsink (no fan) and the driver can be placed outside the tent 🌡️⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Up to 15 can be daisy-chained together and all controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_

i thought she was dead long ago because this was a shit year in europe to grow things, tomatoes all died and this lil fella stand strong in between the trees with, sometimes, less than 5°c with rain and wind ^^ now im happy to harvest around 5 grams XD hoping next year will be better a little bit purple, gon chop her down soon.

📆 Semana 5 ¡La Swag MDC sigue sorprendiendo! 🌸 🔹 Desarrollo floral: Las flores están creciendo a buen ritmo con tricomas ya comenzando a aparecer y las primeras señales de resina cubriendo los cogollos, la planta está mostrando su potencial y cada día se ve más fuerte 🔹 Tamaño y estructura: La planta sigue desarrollando una estructura robusta con ramas laterales que se extienden uniformemente, los cogollos son densos y prometen una buena cosecha si todo sigue bien 🔹 Condiciones ambientales: La temperatura ha estado entre 24-26°C durante el día con una humedad más baja, alrededor del 50-60%, para evitar problemas de hongos en los cogollos, esta variación de humedad ayuda a la resina a desarrollarse correctamente 🔹 Nutrición: He comenzado a ajustar los nutrientes con XpertNutrients siguiendo el esquema recomendado para la fase de floración, la planta está respondiendo bien a la cantidad de nitrógeno y fósforo y las hojas están verdes y saludables, sin signos de deficiencia 🔹 Equipos utilizados: Los Adlite de Mars Hydro siguen funcionando a la perfección, ofreciendo una luz adecuada para el crecimiento de los cogollos sin generar un calor excesivo, estoy muy satisfecho con los resultados y cómo la luz favorece la producción de resina y la densidad de los cogollos 🔹 Observaciones generales: La Swag MDC está desarrollándose muy bien sin signos de estrés ni plagas, la planta está concentrando toda su energía en la producción de flores y resina, no he tenido que hacer ajustes drásticos ya que está mostrando un buen equilibrio ¡Seguimos creciendo fuerte! 💪

68 days of flower sticky frosty solid buds branches supported becomes big dark green buds covered with frost

Started to flush this week, looking to chop next weekend hopefully depending on how the trichomes look. Pistols mostly amber now and buds smelling strong, looking forward to my 1st harvest now, Happy growing!

My baby and I are reconsidering the path of our relationship. I made some mistakes that slowed her development. To be more precise, I placed the pot directly in the run-off water tray of her sisters. I couldn't get it why she was showing signs of overwatering until I made the connection: - She was sucking on the runoff water. So... that fucked things up a bit. It resulted in slow growth and eventually Nitrogen deficiency. I basically didn't feed her anything this week(not on purpose at least). I transplanted her in an 18l pot today, and I'm considering taking her out in the greenhouse in 4-5 days when I'm going to flip the other ladies to 12/12. I really like her genes so far, so easy to play with! <3 👆 So the thought is that she would get about 10 weeks to mature into a fine lady in the greenhouse until the coco ladies will be finished, then I will move her in and bloom her. What do you think about that idea?

We had problems with nutrients but that was controlled with the adjustment of ph the growth is going well we are in the sixth week.

Everything is going to plan so far, at the end of week 4 I will be flipping the lights to 12/12 because the gelatos will be ready for it, but the Og is a little bit behind but I’m sure it will catch up with them in the stretch. Day 26 - just switched the lights this morning 12/12 as it’s about time imo as the gelatos are getting big I don’t have the time or space to let them veg on so the Og could catch up, so I’m gonna hope that during the stretch it does.

🇺🇸Grow Journal🇺🇸– Week 5 – Mother Gorilla (Royal Queen Seeds) Week 5 Summary This week didn’t go as planned. I switched nutrients, and the plant didn’t respond well, possibly due to overfeeding. I probably should have transitioned more gradually to avoid stressing it. Nutrient Issue • Previously used: Formulex • New nutrient: Ionic Hydro Grow • Possible cause: Ionic Hydro Grow has a higher concentration of nutrients than Formulex. The sudden increase may have stressed the plant. • Symptoms: The new leaves are showing signs of damage, which could indicate nutrient burn. Typically, deficiencies affect older leaves first, so it seems more like an excess—but I can’t say for sure. Corrective Actions • Diluted the nutrient solution to lower the EC. • Initial EC: 2.6+ (but my tap water already has a high EC, so the actual nutrient EC is hard to determine). • New EC: Below 2, but again, since my starting EC is high (around 0.8-0.9), it’s difficult to get an exact reading of the nutrient contribution. • pH adjusted to 5.9-6.0. Current Conditions • Light schedule: 18 hours • Humidity: 70% • pH: 5.9-6.0 • EC: Below 2 (but actual nutrient EC remains uncertain). Next Steps • Observe the plant and see if it recovers. • Adjust the next nutrient mix carefully to avoid overfeeding. • Continue light training (LST), but growth has slowed due to stress. Hopefully, the plant will bounce back. I’ll reassess next week and adjust accordingly. 🇫🇷Journal de culture🇫🇷 – Semaine 5 – Mother Gorilla (Royal Queen Seeds) Résumé de la semaine 5 Cette semaine ne s’est pas passée comme prévu. J’ai changé de nutriments et la plante a mal réagi, probablement à cause d’un surdosage. J’aurais sans doute dû faire une transition plus progressive pour éviter un stress trop brutal. Problème de nutriments • Nutriment précédent : Formulex • Nouveau nutriment : Ionic Hydro Grow • Cause probable : Le Ionic Hydro Grow est plus concentré que le Formulex. L’augmentation soudaine des apports a pu créer un stress. • Symptômes : Les nouvelles feuilles présentent des signes de brûlures ou de stress. Comme les carences touchent généralement d’abord les vieilles feuilles, il est possible que ce soit un excès. Mais je reste prudent sur cette analyse. Corrections apportées • Dilution de la solution nutritive pour faire baisser l’EC. • EC initiale : Supérieure à 2,6 (mais mon eau du robinet a déjà une EC élevée, ce qui fausse un peu la lecture de l’apport réel en nutriments). • Nouvelle EC : Inférieure à 2, mais encore une fois, avec une eau du robinet à 0,8-0,9 EC, il est difficile de déterminer précisément l’apport réel des nutriments. • pH ajusté à 5,9-6,0. Conditions actuelles • Cycle lumineux : 18 heures • Humidité : 70% • pH : 5,9-6,0 • EC : Inférieure à 2 (mais difficile à interpréter précisément). Prochaines étapes • Observer la plante pour voir comment elle évolue. • Ajuster la prochaine solution nutritive avec plus de prudence. • Continuer le palissage, même si la croissance a ralenti à cause du stress. J’espère que la plante va se remettre. Je referai un point la semaine prochaine pour voir comment elle réagit et ajuster en conséquence. 🤘😎