New Life New Adventure 🌱

Moochie's Garden 7/7/2025 Big bluster - "Miracle-Gro/10 gallon, no ph, right out of the well" Wife said phuck Fox farm we are using NPK RAW, using ph watering cans to feed @ 4 gallons each and 5-gallon buckets of ph. watering. Once a week per feed/water. Following NPK feeding schedule. AzaMax soil drench .4%, 2 gallons each plant. Still spraying neem. Next, mixing Azamax for foliar spray. If I had not taken steps to prevent pests initially, I'd be completely overwhelmed.

Last week for this girl next update is harvest flushing nicely no major fade yet but can see it starting in places buds are nice and dense not very huge but the quality and the pungence and stickiness coming from her is like nothing iv grown so far trichs are cloudy slightly amber in places ,just put in a new led for the last week im going to be running a few of these in my next grows so just testing can allready see more light penetration and spread compared to my old 300w led .Shes been my favourite so far beautiful to watch change and grow shes still on just water at 0.4m.s /400ppm just started using an e.c meter didn't use it before but ill start now chopped a little bottom branch of to test after a week flush not much else to report will be putting a lot of pics on as its her last week and wont be seeing her beauty much longer ...will be harvesting after 10 day flush instead of 14 day some issues just popped up else where shouldnt make too much difference hopefully thanks for reading happy growing guys

July 5 - The girls are still doing awesome. temps are between 21-26. Humidity is 40-50. Still feeding every 24-36 hours with 3L per plant. July 6 - They are doing good. Showing lots of flower sites now. Unfortunately I did not get any pictures today. July 7 - Tons of progress since last week. I don't see any signs of any problems, and still no pests! The smell is getting A lot stronger as it starts to flower more July 8 - Still doing there thing, no problems, temps and humidity is fine. Have been feeding every 24 hours now as they seem to be really thirsty July 9 - Super happy with how they are doing. No issues yet. Smell is heavier, and tons of bud sites showing up. Only issue is they are growing pretty uneven. July 10 - Time to get a even canopy! First time doing some HST. I also did some defoliation. One of the stems split open a bit but it seems to be doing just fine. I did he HST and defoliation in the morning, i then took pictures of 12 hours later and everything seems just fine! July 11 - Everything seems to be a lot more even and the broken stem doesn't seem to affect the growth.

Spread this girl out a bit using some string and mild LST. She's responded super well and all the bud sites seem to be getting a nice dose from the TS1000 :) Bit late uploading this week but the pictures were taken back on Tuesday meaning this is still an accurately dated upload.

Missed last week update but did some cutting girls have to live up to the mission 73 between the 5 plant....added one more which was a cutting from a seed plant harvested previous...didn't look like I did anything so cut dem a few day later 85 between the same plants... only cut the lower half of G4 n smaller inside branches( going to stop they dont hold up well)

They completed third week of flowering. They still stretched 10-15 cm this week even though I dialed in level 9 on my light. Dripz and Grape Soda x Star Killer simply enjoys high intensity and can easily handle 900-1000 uMol range which I am experiencing first time. Humidity is still fluctuating between 52-55%. Temp is decrease to 24 Celsius in average which dropped the VPD to ~1.30 which is not ideal. I might consider moving dehumidifier into the grow tent and remove humidifier for the rainy next week. They received a big Lollipoping and Defoliation last night Day 21 but I may have to redefoliate Blueberry Muffin as it is still very bushy.

Wow 😯 I’m so amazed by this CBD plant of spiced orange 🍊 from BSB Genetics she’s on node 7 and I’m not sure if I wanna too her or let her just go?? What do y’all suggest?

03.04. Day 64 Flower 40 Hallo Leute seid mir willkommen zu : GRAPE APE F1 die einem beim Riechen zum Niesen bringt. Es kribbelt wie Zitronensäure. Die muss sauer sein. Es gibt immer mehr Lila, auf jeder Traubenaffen F1 die so ca 2 Wochen in Blüte ist. Schick. Die Pflanzen an sich bleiben klein, kein Wachstum. Die Knospen schon 😍. Sie Pludern sich auf, strecken sich und werden bestimmt hart sein. Das habe ich nicht getestet, ich will ihre Entwicklung nicht stören. ❤️ Ich liebe Cannabis zu growen. Das macht so viel Spaß ( wenn es klappt ). Ich bin zwar Großmeister, und meine Knospen sind herrlich, aber meine Pflanzen sehen immer sehr mitgenommen aus. Hüstel(geheucheltes Husten, nur wegen der Dramatik) Wenn ich das kann, kannst du das auch. Es ist legal in Deutschland 3 Pflanzen zu haben. Ich würde sagen Grape Ape auf dem Balkon geht voll klar. Gute Erde dazu. Dünger wäre toll, ist aber kein muss. Die Nachbarn kriegen das auf jeden Fall nicht über den Geruch mit . 1. Dezent 2. Weintrauben 3. Klein Nur so als Gedanke. Ich freue mich jedenfalls über ihr Aussehen ( für mich, nicht schlecht ), und diesen Geruch. So Sauer+Trauben+weed. Ich glaube das ist ne richtige Hardcore INDICA. 😳 Steht ja auch so in der Beschreibung.... 👍 04.04. das 65. Die erste Knospe ist wirklich fertig! 😳😍 Wow , das hätte ich nicht gedacht. Komplett milchig, die Hauptknospe. Mit Licht Gehampel, day 65 ab Keimung, 💪 stark. Natürlich, wer mich kennt, es gibt noch ein Paar Tage. 2 Gründe, mehr Gewicht, und ich hätte gerne ein wenig Amber Trichs. Aber sie riecht geil, ihre Knospen sind fest und klebrig. Ja, und dann kommen ja noch ihre F1 Schwestern. ? Also Wahnsinn. So Schnell. 07.04. dieses eine Blatt hat so krasse Farben. Leuchtend Radioaktiv. Was wird das für weed? So, genau ab jetzt hat sie mich. Die Grape Ape F1. Diese Farben sind 😍. Hat zwar etwas gedauert bis ich fan wurde, wegen wo ist sie denn ( sehr klein, die gröste bisher 47 cm. ) . Aber als sie die Farben änderte, und der Geruch dazu kam fand ich die Interessant. Ist wichtig, denn ich mag Cannabis als Pflanze sehr, da schnell und schön. Und im besten Fall, BUNT. Wie diese hier. Und ich bin gespannt welche Farben die anderen bekommen. Die sind zwar alle ähnlich, aber im Charakter unterschiedlich. Also, ich sage es gleich. Viel kommt da nicht runter. Wie denn auch, ist sehr klein. 21% THC Indica Style. Das geht nur mit kleinen Pflanzen. Indicas sind halt klein. Und schlagen hart zu. Wie Zwerge. Ich liebe Zwerge ( es sei denn ihr habt eine Audienz bei Hochlord von irgendwo. Ich glaube Zwerge sehen nur einmal in ihrem Leben Wasser. Bei der Geburt.👍 Leute ihr müsst die untern Tisch saufen. Nen Zwerg, das ist hart, dann könnt ihr in Baden, wenn er besinnungslos ist. ) Nur so als Tip.

Day 15, slightly smaller then I’d like for day 15 but I’m sure they will fill out just fine. 🌱

Gracias al equipo de Royal Queen Seeds, Marshydro, XpertNutrients y Trolmaster, sin ellos esto no seria posible. 💐🍁 Gelato #44: Los criadores de Tyson 2.0 criaron Gelato 44 a partir de cepas finas. Al cruzar la Sunset Sherbet y la Thin Mint Girl Scout Cookies, crearon un híbrido de dominancia índica que asesta fuertes golpes en el cuerpo y la cabeza. Su contenido de THC del 22% crea sinergia con terpenos colocantes para ablandar los músculos Mantenla hidratada y con una dieta constante y pasará por la fase de floración en unas ocho semanas. Las plantas de interior alcanzan una altura máxima de 120 cm y producen 400-450 g/m², mientras que sus homólogas de exterior alcanzan los 180 cm y producen hasta 600 g por planta. 🚀 Consigue aqui tus semillas: https://www.royalqueenseeds.es/rqs-semillas-cannabis-tyson/664-dynamite-diesel.html 💡TS-3000 + TS-1000: se usaran dos de las lámparas de la serie TS de Marshydro, para cubrir todas las necesidades de las plantas durante el ciclo de cultivo, uso las dos lámparas en floracion para llegar a toda la carpa de 1.50 x 1.50 x 1.80. https://marshydro.eu/products/mars-hydro-ts-3000-led-grow-light/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 💻 Trolmaster Tent-X TCS-1 como controlador de luz, optimiza tu cultivo con la última tecnología del mercado, desde donde puedes controlar todos los parametros. https://www.trolmaster.com/Products/Details/TCS-1 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 📆 Semana 9: No ha sido una gran semana respecto al tiempo pero el incremento de nutrientes le ha venido muy bien Continuo con la dosis recomendada por el fabricante.

Día 36. Estamos en 6ta semana. Los esquejes se atrasaron debido a que han sido días muy fríos y no he logrado enraizarlos. Decidí poner el extractor de aire junto con la bomba de aire, así solamente se prende 15 minutos cada hora. Así estoy logrando temperaturas mayores a 24°C en el indoor y así voy a lograr el enraizado. La planta ya tiene un tamaño que ocupa casi todo el indoor. Pero lo importante es que la voy guiando y ya estoy proyectando como va a ir cada rama. El tamaño va a exceder lo que esperaba, pero aún así creo que si logro lo que tengo en mente, voy a sacar muy buenos resultados. Igual no me voy a arriesgar demasiado, así que si contando 10 días desde ahora, no logro que los esquejes enraicen, voy a pasar la madre a floración sola. Cómo pueden ver, las ramas están bastante gruesas, y el la ramificaciones van ganando su lugar cada una. Las raíces son demasiado grandes, aunque sé que voy a poder poner la planta en el sistema de arriba igual, aunque me voy a tener que ayudar de algo para meterlas. Es importante no utilizar las manos, ya que se pueden transmitir muchos hongos. Voy a seguir actualizando e ir viendo que pasa. Pero ya estamos en los últimos días de crecimiento, haya o no esquejes. Incluso puede que ya pase la planta al indoor de arriba para darle mayor libertad de crecimiento. Esto me va a servir para tlmar en cuenta en la próxima camada que se vendrá. La idea de esto es hacer las cosas rápido, y no en gran tamaño. Pero siendo que ya estoy en el baile, no me queda otra que bailar. Día 40 Los esquejes no estaban enraizando, así que decidí cambiarlos de lugar y los puse arriba de la luz, donde les da calor y luz tenue. Espero que ahora si agarren. Y hoy fue el gran día, pasé la planta madre al módulo de arriba. Pero lo voy a dejar una semana más creciendo. De esa forma veo si los esquejes llegan a agarrar a tiempo. Y además tuve un problema en el trasplante. Primero que la planta se hizo más grande que lo esperado, y la raíz también. Cuando la pasé, hubo contacto de la raiz con prácticamente todo lo que había cerca. Sumado a que se enredó en el oxigenador, así que quedó una pidra difusora en la raíz. Dado el alto riesgo de haberla contaminado con algún hongo, le puse una solución de agua con agua oxigenada, recirculando continuamente, para lavar las raices y de paso bajar el stress de teansplante. Mañana veremos cómo arranca el día. En el aprendizaje me llevo que en la madre, es mejor hacer un corte en el primer nudo, o dejar las ramas del segundo y quitar las del primero. Y así que queden sólo dos ramas, para luego dejar a los esquejes en el medio. Eso planeo hacer con la próxima variedad. Entre tanto ahora sólo me preocupa que la raíz no se haya contaminado en el traspaso. Ya en 8 días estaré pasando a floración si no hay esquejes. Si llegan a agarrar, habrá que dar unos días de crecimiento hasta que alcancen a la madre en altura. Pero ya está todo en definición. Ahora sólo queda esperar y seguir guiando a la planta. Ya tengo ganas de poner la próxima, pero falta bastante para eso. Tengo 10 semanas de flora, así que recién en 5 semanas voy a poner la nueva madre.

I can’t believe how big it’s become !! 😍

Hey Growmies, some of you had asked to me if I prepare concentrates.......Yes I do! I don't like modern rosin extraction but instead very rarely I like to smoke some oil. The following is the recipe of cannabis oil made by ancient Mustapha's process. It needs: pharmaceutical grade ethyl alcohol (96.5% by vol.) or 95% for liquors Weed A jar with rounded bottom A lot of time This oil is 5 months aged, from 20 grams of weed I've obtained 3.5 grams of product. Trim previously dried weed (20 grams) and put into a 500 ml jar. Cover with 200 ml of alcohol and leave it partially covered with cap. Let alcohol to evaporate on itself and shake the mixture 2 times a day. The most of the solution will evaporate within 10-15 days. When the solution is evaporated by 2/3 it needs to be filtered between 90 and 120 microns. Now is the time to finish and decarboxylate the solution by heating the jar by bain-marie until the green cream sticks to glass. The jar needs to be refrigerated before you remove the cream with a spatula to transfer it into a smaller jar. Store it in a dark place and open twice in a week for few seconds. You'll obtain a petroleum green/dark amber cream (the green tone will turn into dark brown by time). If the job is well done the surface will crystallize and will shine like a mirror. This cream is insanely sticky. Smoke one drop a time. The collapse is around the corner. Tips: Best results, in terms of flavour/aroma, with single strain Let alcohol to evaporate very slowly, take away some macerated weed (after at least 48 hours infusion) and add new weed/hash pieces little by little. Act as if it were a piggy bank. The final product is a very strong shit, really narcotic.

Feeding As usual, plant was given nutrient solution every day when the sun went down in the concentration down bellow -    FloraSeries Gro-->1.8 mL/L -    FloraSeries Micro-->1.2 mL/L -    Flore Series Bloom-->0.6 mL/L -    Calcium solution-->1 mL/L I started with 1L of tap water measured at 240ppm. Then added Calcium fertilizer from gardening store and ppm were around 500. Then Flora series nutrients were mixed in and ppm reading was around 1000. This is to high so I diluted the solution with tap water to 650ppm. I ended up with 2 L of nutrient solution. Diary Day 73 Plant was topped for the fifth time. Now I have 32 mains to work with. I also noticed first signs of preflower today. Day 76 New mains are now 1 cm long. Weather report Day 71-73, 76-77 Weather was sunny, day temperatures were 33 °C, night trmperatures were around 22°C. Day 74-75 It was raining most of the day. Day temperatures were 26 °C, night temps were 16 °C. On day 74 wind was very strong and to prevent any demage plant was moved inside

Bäume

Well, the drought stress in week 11 really fucked my plants up, but Twiggy recovered, while Zoey was hurt pretty bad. If I did nothing, I'm betting harvest would've been 25% more, and Zoey's buds wouldn't look so crappy, but overall, I was so happy with this grow! I was under a time crunch, so only did minimal veg for 4 weeks, topping once. Daily watering with 1.8EC mix that was pretty consistent. Kept pH between 5.5 and 5.8. Kept tight control on humidity and temperature up to mid flower, then kept air circulation on to keep room humidity around 55% Things I'd do differently: 1. Veg longer - I'd love to try a mainline 2. Canopy control - wish I had spent the time on a SCROG screen, or at least a couple of rings. 3. More light sooner into flower. Waited about 4 weeks into flower before maxing out the light. Probably could've bulked them up significantly if I started earlier 4. Drought stressing - For Fucks Sake, keep a close eye on your plants, and the minute they start to wilt, get the water back on 'em!!! 5. Measure your run-off more frequently for salt build-up. Didn't have any problems, but it's a good best practice. 6. Set up proper closed-loop environment to allow for CO2 enrichment. 7. Set up a clone environment before you get to flower. Oops. Things I was happy with: 1. VPD control system (heat, humidity) during veg and early flower worked flawlessly. Never any nute burn, and super healthy plants. 2. Sterilized soil and grow-room before starting - never had a single bug or any mold/mildew issues. Used a MERV 13 filter on the air intake, exhaust through carbon to crawlspace. 3. Coco/perlite mix - super drainage, low build-up, very healthy roots. 4. Power meter - neat way to measure what's really going into the grow, so when your wife complains about power usage, you can show her the real numbers. 5. Photone app on Android S20 - Knew where my PPFD was for optimal growth control. 6. REX-C100 PID controller for toaster oven - super tight temperature control comes in handy for decarbing as well as toasting oak for moonshine.