Likes
Comments
Share
@Canna96
Follow
Hey now, hope everyone is having a great weekend. Not much to report on the Durban Nights, she popped above soil on day 3 and is now on day 7 and has her first true set of leaves. I started prepping the Coco Coir by flushing down to .4 EC and then soaking in water with an EC of 2.0 with Cal Mag and a PH of 6.8. I will let it soak until the seedlings are ready to be transplanted hopefully by next weekend or shortly thereafter. The weather in my region is perfect for cultivating seedlings as it is fairly hot and humid and I only have the Spectrum X running at 30% so it is not putting out much heat and I also have a humidifier running in the tent on low which is maintaining a RH of around 68%. I do have the AC Infinity fan kick on here and there just to keep some fresh air in the tent but no real issues with heat. Super excited for this strain as it is a cross of Durban Thai and Jack Herer which are two of my favorite Sative Strains. I hope everyone has a safe weekend. Thanks for stopping by, Stay Safe and Blaze On!!! 💪 Website: https://medicgrow.com/ https://growdiaries.com/grower/medicgrowled
Likes
5
Share
CHERRY 🍒 COLA 420/FASTBUDS This lady really produces some extra sticky dense buds that look amazing and smell 👍 great! I had no issues with this strain. She was grown in organic soil with only FOOP nutrient line and she responded with some good looking buds!! Overall a easy grow with rewarding results ✨️ one of the strains I would suggest growing 😀!! Stay Growing!! Thank you for stopping by and taking a look it's much appreciated!! Thank you 420/FASTBUDS!! CHERRY 🍒 COLA 420/FASTBUDS
Likes
7
Share
@Ryno1990
Follow
This amazing looking girl Purple Goat Cheese is so stinky it is overpowering all the other smells in the tent with the strongest sour smell iv smelt on a plant she is ending week 5 here an will prob go another week or so before she starts her flushing for harvest
Likes
97
Share
JungleBoys Gelato33 x ZkittlezCake (clone) THC: 30+% Terp: 45% Nutrients • GreenBuzzNutrients (DISCOUNT CODE • (GD42025) %25 off I use the whole product range and this stuff is a game changer. I've not had one bad grow with this company and it hasn't let me down once. Terps and taste are through the roof. No need for run off in coco only during flush week (i use a 0ppm distilled water) Hands down the best nutrients on the market GREEN BUZZ OUR NOW GIVING YOU GUYS A SUPER DISCOUNT OF %25 WHEN USING THE NEW CODE ABOVE. JUMP ON BOARD THE GREEN BUZZ TRAIN AND GIVE YOUR PLANTS WHAT THEY DESERVE 💚🌱 LIGHT/TENT • Mars Hydro FC-E6500 5x5 tent This clone is massive. Hoping to hit 200gs in dense smelly nugs. Buds are rock solid. If you haven't already please give GreenBuzzNutrients a follow and have a serious think about switching. This stuff is just on another level and Organic. Not salts or silicon to ruin the taste and super easy to use 🌱💚 Bubble hash review : most probably 3oz of trim and all the sugar leaves. Easily oz if not 1half. It smells amazing and will be a great smoke 👍🏻 dry weight in a couple of days
Likes
8
Share
Creciendo muy fuerte! LISTA PARÁ EMPEZAR CON LA FLORACIÓN 😝
Likes
103
Share
Happy day to all of you, Weed friends. And welcome to a new week in the Gardens of Queen Peaky. We have begun to insert a little bit of "Calmag" to support the fertilision program The apical top of the plant behind is stretching too much ... I wouldn't want to have a burning from LEDs ... but now they have invaded every millimeter
Likes
12
Share
@Elemental
Follow
======NOV 4 | DAY 22====== She is a bit different of predominat sativas, leaves are bigger. Today I increase some humus and some peat. ======NOV 5 | DAY 23====== LST her today ======NOV 8 | DAY 26====== 2 more LST HOOKS ======NOV 10 | DAY 28====== I hid some leaves below the main branches
Processing
Likes
1
Share
Started adding the nutes at 1ml/l. Just using Advanced Nutrients Sensi Coco A+B for veg, Will add in some molasses after any HST or defoliation (stress). Looking good so far.
Likes
92
Share
Week 9 - First Week of Flowering 🌸 The dark period has ended, and these ladies came back into the light fully energized and ready for action! It’s just the first week of flower, and they’re all praying, stretching, and absolutely thriving—filling up every inch of the tent. This grow space is officially packed from wall to wall, with each plant competing for its share of light and showing off some of the biggest, healthiest leaves I’ve seen yet! 🌱 A few strategic plucks here and there have kept airflow smooth and light penetration balanced. Those big leaves? They’re a sign of happy, healthy growth. Large leaves help the plant capture maximum light energy, essential during this stage, especially as they start focusing on developing those flowers. When plants grow huge, vibrant leaves like these, it means they’re well-nourished and content in their environment—a true testament to the well-balanced conditions we’ve got going in the tent! Flowering Parameters 🌡️ Room Environment: • Temperature: 26.7°C • Humidity: 63.3% • CO2: 960 ppm • VPD: 1.29 kPa (prime zone for flowering health!) Lighting: • Light Intensity: 835 PPFD (ideal for boosting flower growth) • Solution: pH 5.96, TDS 460 ppm, temp 21.1°C • Medium: Moisture: 100%, TDS: 520 ppm, Temp: 21.6°C Carbon Filter Installation & Smell Management 🌬️🌱 With the transition to flower, the scent profile is already starting to kick in—crazy for the first week, right? 🌸 To keep everything fresh and under wraps, I’ve set up a carbon filter system. Here’s how it’s working: I’ve connected the filter to my Aerofan, which pulls air directly from the tent. This air is cleaned by the filter and released into the main room, where it then passes through another filter before exiting my space. This dual-filter setup means no scent escapes into the wild, keeping things stealthy and the grow room a peaceful, scent-contained environment. Perfect for anyone concerned about keeping their home free from that telltale aroma! 🕶️🌬️ Enhanced Lighting with Emerson Effect 🌞 This week, I’ve introduced an extra 15 minutes of red light at the beginning and end of each light cycle. Why? Well, this red boost taps into the Emerson effect, enhancing photosynthesis efficiency, especially during the flowering stage. By stimulating a little extra wake-up and wind-down light, we’re mimicking the natural sunrise and sunset experience for these plants, which can help reduce flowering time. Not only does it encourage smoother transitions into day and night, but in theory, it’ll help these ladies finish a bit faster, while giving them a little nudge to build more substantial, quality flowers. 🌇 Nutrient Adjustments 🌱 Now that we’re in flower, I’ve swapped out the Start Booster for P-Boost and TopBooster to specifically support flowering needs. Here’s why: • P-Boost brings in additional phosphorus, vital for energy transfer and cell division as the plant channels more resources into budding sites. • TopBooster supports the flowering phase by improving flower quality and density, helping to build those big, aromatic buds we’re after. These changes bring the nutrient mix in line with what’s most beneficial at this stage. All this precise dialing in is easy to manage thanks to the TrolMaster system. From pH to nutrient scheduling, the TrolMaster ecosystem and ThinkGrow LEDs have been the ultimate teammates in this grow journey, giving me real-time data, fine control, and peace of mind. 💯 (Not introducing UV light just yet, but stay tuned as that’s coming soon for an added boost!) Looking Forward 🌟 Next week, we’ll be upping the reds, giving us an even greater chance of activating those flowering signals for a smoother, faster transition through the cycle. I’ll keep tweaking and fine-tuning every parameter to make sure these ladies get exactly what they need to thrive. Big thanks to the TrolMaster system for keeping everything in balance and optimized, along with the supportive Grow Fam following this journey! Your enthusiasm, advice, and support are a huge part of this grow’s success. Keep following for more updates, and stay tuned for what’s next! 🌿✨ P.S. Deep Dive: TrolMaster’s MBS-S8 CO₂ Sensor & Smoke Detector 🚨 The MBS-S8 CO₂ Sensor from TrolMaster is a powerhouse for growers, especially when it comes to optimizing plant growth and efficiency in a controlled environment. This sensor continuously monitors CO₂ levels and integrates directly with the TrolMaster ecosystem, giving you real-time data on CO₂ concentration. Ideal levels of CO₂ can significantly boost growth and yield during certain stages, so understanding and managing CO₂ is key. With the MBS-S8, I can control CO₂ levels precisely, keeping them within the optimal range for photosynthesis. This sensor is a game-changer because it adjusts CO₂ delivery automatically, giving plants exactly what they need without any extra monitoring from me. Meanwhile, TrolMaster’s Smoke Detector is an essential safety device, especially in spaces with electrical equipment, lights, and heat-generating components. This detector can be set up to alert me instantly via the TrolMaster app if any smoke is detected, allowing me to respond immediately to any potential issues. Fires and smoke are rare in controlled grow setups but having this safety measure provides peace of mind and lets me focus on the plants without constant worry. It’s an incredible tool for any grower prioritizing safety and proactive monitoring. Discount Codes so you can save big on your next check out 💚💚💚 Kannabia - DOGDOCTOR 30% off SeedsmanSeeds - DOGDOCTOR 10% off CannaKan- DOGDOCTOR 15% off terpyz.eu - DOCTOR 15% off The Neutralizer - PORKIT5-DOG 15% off As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 Friendly reminder all you see here is pure research and for educational purposes only Growers Love to you all 💚💚💚
Likes
54
Share
I always grown with HPS lights, now after 10+ years is time try to run with a new lamp 🔌💡💪🏻 Lotta Love Lumatek 💚
Processing
Likes
141
Share
@Eyeduno
Follow
Flushing the one plant this week and the others next week two week flush then
Likes
13
Share
@goeser
Follow
I love this strain. Really strong genetics. Nice fruity and og kush like smell. Cant wait to harvest and try them.
Likes
72
Share
@BodyByVio
Follow
This week I finally completed the RDWC system. Everything is working how it suppose to. The chiller is set to 66 degrees Fahrenheit. Also I start adding 1000ppm CO2. Lighting intensity ( Fluence Spydr 2i) is set to 75%.
Likes
47
Share
These ladies are looking damn fine and of the two they are what seems identical - 👍 Sweet Seeds for gen stability. Both were topped 7 days ago and the inside lower nodes all removed. I’m only looking for A,B grade colas on both. Stay safe, keep the ✌️
Likes
8
Share
Defoliation happened mid week before a trip away for a few days got home today to see they have just popped. Growing very nicely even the little one that was pegged down to spread it out. Plants ranging from 20cm to 35cm and all looking very happy with themselves. They have also been getting some 90’s grunge music that apparently they dance along to
Likes
5
Share
Just this one girl is ready. Not too hard of a grow. Some powdery mildew towards the end but not too bad. The amount of trichomes is amazing. It was to the point I thought it was PM on some of the fan leaves. The smell was great. A definite grape smell and some fruity fuel as well. They can take a bit of a beating. I had a huge ph issue for weeks and they kept going along. I can't imagine if it was a flawless grow. These buds seem very dense. It was deceivingly heavy when i chopped her down. Will update with weight and the rest of the harvest. If you haven't you should grow this!