There's nothing to write about 😍

Week 10 Flower — The Beauty Before the Finish This week marks a very special chapter in the Eternity Grow Cup. As we approach harvest, the garden is simply glowing with beauty. Every corner, every canopy, every branch tells a story — and this week, I’ve taken the time to slow down and capture that story as best I can through the lens of my camera. All the photos you’ll see in this update were taken with care and intention. I use my Sony camera in full manual focus mode, and I don’t just snap and go — I spend time with each plant, each angle, waiting for that perfect moment when everything aligns. These are not just photos to document — they’re my attempt to reflect the feeling of the room, the energy of the grow, and the soul of each plant. Just like with the videos, I don’t shoot randomly and decide later. I record what matters, and what I record, I use. It keeps me focused, organized, and deeply connected to the process — and I believe it helps me tell the story more clearly, whether through stills or moving pictures. All five Runtz phenos are finishing beautifully. Each one expressing unique traits, but all carrying the same stunning quality — dense, clean, colorful, resin-rich flowers that fill the room with pride. This garden is finishing spotless, and I couldn’t be happier. This week’s YouTube episode will reflect that beauty. If you’re seeing this here on GrowDiaries, I highly recommend checking it out in full 4K once it’s live — there are moments that simply can’t be translated in photos alone, even though I try my best. But for those who love the details, the full spread of pictures is right here, as always. t this point in flower, the girls are not eating — they’re just drinking clean water with nothing but System Clean in the reservoir, at a rate of 0.25 ml per liter. This is part of a gentle, prolonged flush phase I like to implement, giving the plants a chance to metabolize and fade naturally. The goal is to promote clean, vibrant flowers that finish with optimal expression, without rushing the process. No forced flush, just time and care. Lighting-wise, the spectrum has been tuned with precision — we’re currently running 40% on the whites, with reds and UVs at 100% to drive trichome development, resin production, and color expression in these final days. The plants are loving it — they’re soaking in the deeper wavelengths that signal the end of their life cycle and responding with a final push of energy. And yes — we’ve been running 11 hours of light and 13 hours of darkness from the very start of flower. It’s not the usual 12/12, and it comes with its pros and cons. On the upside, it helps speed up ripening slightly, encourages more compact flower formation, and mimics the natural seasonal decline in daylight. On the flip side, it slightly reduces the overall DLI (daily light integral), so you need to ensure your PPFD and spectrum are dialed in just right to avoid sacrificing yield. For me, the trade-off is worth it — the plants are expressing themselves beautifully, finishing strong, and packing on the final magic. Now it’s your turn — I’d love to hear from you. Which phenotype is standing out the most to you in this garden? Which one is catching your eye with its colors, its fade, its structure, or just that vibe that speaks to your soul? Is it the frost? The density? The posture? Each of these girls has her own personality, and I know many of you have been following closely — so drop a comment, let me know: which one is your favorite? Which one would you take home? This run has officially earned the Dog Doctor Official Wax-Sealed Stamp of Approval. These genetics are beautiful — expressive, vibrant, clean. It’s been a joy to grow them, and an even greater joy to share this journey with all of you. Of course, we still have the final word coming after harvest, drying, and curing — that’s when the full picture reveals itself. But until then, based on everything we’ve seen and lived in this grow… this is the real deal. To everyone following the journey — thank you. To the sponsors, the community, the silent observers, the passionate growers, the haters, the lovers — I see you all, and I appreciate every bit of energy you send. This cup has been about more than just growing. It’s been about sharing. Connecting. Creating something beautiful together. And we’re almost there. Next stop: harvest? provably yes lets see ! Growers love always 🌿❤️ DD Genetics - Runtz https://www.zamnesia.com/6000-zamnesia-seeds-runtz-feminized.html Nutrients - Plagron https://plagron.com/en/hobby - Aptus Holland https://aptus-holland.com/ Controls - Trol Master https://www.trolmaster.eu/ LED - https://www.futureofgrow.com/en LED - https://www.thinkgrowled.com Soil - https://www.promixgardening.com/en Germination - Cannakan https://cannakan.com/?srsltid=AfmBOopXr-inLXajXu3QFgKXCXXos4F1oEvScjMKIB5MR5dk8-GJ-F49 DOGDOCTOR 15% off Smoking Papers - https://ziggioriginal.com/ Terpene saver - https://grovebags.com/ As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciloved and i fell honored with you all in my life With true love comes happiness Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. The journey with nature is one of discovery, creativity, and respect. Let’s celebrate it responsibly and continue to learn and grow together! Growers Love To you All 💚 #EternityGrowCup #RuntzHunt #GrowersLove #CannabisCommunity #AptusHolland #ProMixSoil #TrolMaster #Zamnesia #Plagron #ZiggiPapers #Grovebags

Muy buenas noches muchach@s.... Bueno, comento!, segunda semana de crecimiento de estás critical! 🌱 Cómo ven hoy fue día de selección de las q para mi, novato, fueron las mejores para trasplantar a estas macetas q ya son las definitivas, las regué con ½lts de agua c/u, prendí el otro led y ahora hay una fiesta ahi dentro q no saben, terrible!!.. 😎🕺🏻💡 Bueno, ya las ven, están re lindas... Así q ya no las molesto más... Ahí están trankilamente... La semana que viene les cuento más... Buen finde y buenos humos para tod@s... 🔥 💨💨💨 🇪🇸🤝🏻🇦🇷

I will be growing her again, as I feel like I let her down, by letting her PH drift so low.. Other than that, she grew beautifully, and fumes of potency as you gaze at her! She yielded more than I expected! She's not that far below my previously lowest yielding plant! :)

The smell was new for me its amazing that Fastbuds strains always smell exactly like the name they give them

This week I defoliated. Waited three weeks into flowering, to not stress them like I did last grow. She is rewarding me with some fat bud growth at many sites. I overwatered beginning of this week, but hey seemed to have taken it well. I did another amendment. The first one last week was a test, to see how they responded, they took it well. Just compare last week to this one. The amendment I did: - 5 liters of worm castings - 2 cups bonemeal - 1 cup wood ash - 1 cup microlife I layered this on top of my pots, covering this with bio-coco (pre fertilized) to ward of gnats. The gnats have been getting less and less. They don't like the coco that much, while humidity is just the same and last week higher since I did some more watering. I watered with the perma tea. While this is pretty acidic (PH 5), I can amend with more wood-ash, if you don't and follow this recipe, don't do too much wood-ash since it will kill off your micro organisms. I lowered the light diagonally since the outer right plant is longer and closer to it. The SP 3000 is still performing as you can see. Temps were a bit higher with the lights so low, so far the Orange Hill Special doesn't seem to mind. Im totally amazed with the results so far. Look for the great end of year deals at www.mars-hydro.com. Thank you for checking in on me again! Hug Bud

Perfect to this point dense even colas. Smelling great covered in 💎 last week has been compost teas last one given today. Only water for the next 7-10 and nothing after that till harvest besides 36hr of darkness Home stretch time

Еще одна хорошая неделя, другая неделя ближе... 😁 Девочкам, кажется, нравится новый свет, хотя они перестают расти в высоту. Вы видите, что они начинают откормлять. Я сделал дефоли... удалил большую часть листьев the big вентилятора с длинными стеблями. Я пробовал эту технику раньше со штаммом сативы, и, похоже, он работает хорошо... Так что давайте попробуем это с помощью индики Ог куш проста бешеная сучка :)

Tag 105: Die letzten 2 Wochen beginnen. Ich gieße nur noch Wasser ohne Dünger. Eigentlich würde ich Temperatur und Luftfeuchtigkeit gerne weiter senken, doch da macht mir gerade ein warmer feuchter Herbst ein Strich durch die Rechnung 😤 Die Pflanze hat schon recht helle gelbliche Blätter, was ich schon früh befürchtet hatte. Das Wetter war leider oft einfach zu warm für die Pflanze.

Start of week 12: 4/29/25 Fed with nutrients: 4/29/30 Fed with plain ph water : 4/30/25 Fed with nutrients: 5/2/25 Fed with ph water: 5/5/25 End of week 5/5/25

I'm finally ending this strain and for a minute I had posted the last 2 weeks as a different name... I'm an idiot. From now on, its all going to be different strains so I won't need to keep too much track on what I'm growing. I have several plants right now and will be doing more videos on my youtube channel. PROUD_TO_GROW_LOUD Bros pro grow show. YouTube and Instagram have way more than here. Check it out!

Juan is looking very happy now, reduced the PH slightly, upped the watering and dropped the ppm to 900 About halfway through the flower stretch Slight purple stems in the large fan leaves so time for the top feed and a little tidy The stretch is complete and Juan is looking very happy purple buds everywhere Got lucky with the genetics the buds are turning a beautiful purple

📆 Semana 10: La Epsilon F1 Auto continúa su floración con gran estabilidad. Los cogollos ganan densidad y brillo, con tricomas cada vez más notorios, indicando una producción de resina prometedora. El perfil aromático se intensifica con notas cítricas y especiadas más marcadas. Se mantiene la alimentación con fósforo, potasio y azúcares para consolidar la formación de flores, sin signos de sobre-fertilización ni estrés en la planta. 🌱 Todo en marcha hacia una cosecha de calidad. ¡Seguimos creciendo fuerte! 💪

So I found this elastic SCROG wasn't doing for me ... so I just took it off . Lucky I'm working with a VERY resilient strain as it was cloned from a mother whom in which was the survivor of my 75 plant loss. So this this was burnt to a crisp without water for a little over 14 DAYS . So I wouldn't try this with anything I wasnt sure could "take the heat" . With it off the buds just kinda flopped a bit but still retained alot of resilience; the beautiful things . Now I could name about 100 things I could have done better . But if you think your "the best grower ever " that's a pretty used minded way to look at it . But am I proud of myself . Yeah :) - slow down feed to leave terp at end . Dnuah Dnauh... next week THE ATTACK OF THE CANNABALIST

starting flush

It looks like the powdery mildew wont go anywhere with the spray I am using. Maybe cause it's been raining a lot lately and quite cold weather also. Had to remove some flowers and leafs cause they were infected. One of the plants seems to have some kind of deficiency as you can see from the picture. Is this potassium or is it a fungi, what do you guys think?

I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"

Everything is moving along. Added 2 more table spoon of happy frog, last bit she is going to get. Next week I'll give tea and after that just water. Im hoping she fills out over the next couple weeks.

Day 3 Light LST as stems are still growing, but nice and green. Clean pots is always a must