Processing
Likes
Comments
Share
@mrekansh
Follow
3 ml npk in 2 l water And given half of it! Plant seems to like it And pruning worked wonder! Leaves are healthy and getting much bigger in size! 15 cms+ excited!!
Likes
18
Share
June 7 - We ordered some new lights last week, they are 240w kingbrite samsung lm310h with uv/ir, 3000k, and meanwell drivers. We setup the new room and moved the girls into there. After a bit of LST and a watering (with nutrients) at roughly 7ph, they were ready to go under the 2 new lights and the same SF-1000 we have been using in this grow. The new room is a 12 ft enclosed trailer. I moved everything from the small tent into this. I put clear poly on the walls, floor and ceiling. I put poly on the shelf I am going to be keeping in there as well. I bought 50ft of 6mm mylar and lined the floors, roof and sides with it. I plan to get some reflective tape to seal everything and to cover the wood. I did not get much of a chance to watch temp's today as they it was later in the evening after all was said and done. The inline fan blowing in air from outside. June 8 - 9 AM i checked the plants, they were at 25.2 and 50% RH. Late through the day I had checked and we had gotten up to around 32 degrees. So I moved the inline fan to the closer vent, hooked up to that, and had the air blowing out of the trailer with the inline fan sucking it from above the lights. I then added oscillating fan and had it blowing air on the left side of the room so it would somewhat circulate once I closed the doors. I then checked at about 9pm and we were at 22 degrees. Definitely noticed a decent amount of growth already. I have the lights on a 22/2 cycle as I was worried about the heat at night time. June 9 - Some great growth from the girls, still having problems controlling the temps in the afternoon. I decided to prop the door open a bit to have a constant breeze throughout the day while I am at work. Decided to do some more LST and also a bit of defoliation. I took about 25% of the leaf's that were blocking the new growth as it was getting a bit bunched up. I was then told the leaf's are almost solar panels for them. So from now on I will be trying to just do some tucking unless needed. The leaf's I removed were most of the damaged leaf's, I am not to sure if that makes much of a difference. I gave them a watering with only water as there is a potential I am getting a bit of a nutrient buildup along with the PH problem. Or potentially the reason for the ph problem is nutrient buildup. After watering with A PH of 7 I got some run off and tested it. The smaller plant gave me a PH of about 5.5 where the bigger one is around 5.0. June 10 - Plants are looking happy and showing tons of growth. Seems to be trying to stretch outwards. Not a ton of sign of PH issues showing so potentially getting it under control. Still a bit of damage to previous leaf's but it is what it is! The last few days I have been leaving the door open a bit in order to keep the temps down. I decided to test something and turn the lights off (automatically) at 11AM and back on at 5PM so light schedule has now changed to 18/6 and it seems I may have figured out the issue. We haven't had lots of sun the last couple days so it hasn't been to hard and I have yet to know if it truly fixed the heat issue for now. (I will be looking into a ac unit as well since it typically gets to around 30-35 around here. June 11 - Pulled some of the branches back down and added a few more LST spots. Seems we have a good amount of growth from the smaller plant out of the 2 topped spots. Unfortunately it looks like I fucked up on the bigger plant and only one of the nodes seems to have new growth. I will continue to monitor that but I think I cut the node to low and also to soon. Other then that, the girls are doing great. They seem to be absolutely loving these new lights. I gave them some nutrient water today as well. roughly 3L each. They seem to be A hell of A lot more thirsty under these new lights. June 12 - The girls are doing great , they are still just doing growing away. Lots of progress everyday. I am going to be getting a go-pro so I can set-up a time-lapse for the rest of this grow. I received my new inline fan, I got A ac infinity CLOUDLINE T4 with the temperature humidity controller. I am going to be having one fan pushing fresh air in and one fan pulling out the hot air. I will be doing that tomorrow since I have to work today. June 13 - I ordered another 50ft of mylar and that showed up today. I have decided to remove the shelf and add another 3+ feet to the grow space. So today I installed more poly, mylar, the ac infinity fan. I have it set-up to pump in air if it gets to warm. I am thinking of switching it to the output that way if it gets to hot or to humid I can have that air pulled out of the trailer. Right now my other inline fan is the outtake and I just have it set on full. Overall I think everything is set-up a bit better and more accessible. I will be putting my 2x2 tent in there at the left of the doors so I can have a veg room when these 2 are in flower. I plan to have 4 in veg and 4 in flower for the next grow. Still waiting on JOTI seeds, ordered 3 weeks ago and still have not been shipped. I will be getting those going the moment they arrive. The girls seem to be happy still, did a bit more LST to try to keep everything even, mainly I'm just pulling down on the spots I already have tie wire on.
Likes
15
Share
She continues to put on weight. It has been a hot week here in Northern California but I don't think its gotten over 80 F in the tent. She is looking great to me and I am looking forward to seeing some amber so I know its time to harvest.
Likes
4
Share
Flowering day 15 since time change to 12 / 12 h Hey guys :-) This week the ladies developed beautifully 👍. The stretch has started very strongly :-) . Watering was done twice this week with 1.2 l (see table above for nutrients). The heating mat does exactly what it is supposed to do, you can see that the ladies are doing perfectly again 😃. Fresh osmosis water was mixed with tap water in a 100 liter tank so that I would have enough stale water for the coming week 👍. Otherwise everything was cleaned and checked. During the check, I noticed that after spraying neem oil 3 times, there were still a few damn trips to see. I have ordered nematodes for leaf and substrate against tripse. Then they should finally be gone again 🙏🏻 have fun and stay healthy 💚 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : Clearwater Seeds Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany
Likes
14
Share
Woche 1: 2024-07-18: Die Samen habe ich zum Keimen in feuchte Wattepads gelegt und anschließend in einem Zipperbeutel deponiert. Anschließend gab es Dunkelheit für die Samen bei ca 28 Grad. Zwei Tage später waren sie bereit um umgesetzt zu werden. 2024-07-20 Heute ging es daran die gekeimten Samen umzusetzen. Ich nutze dafür ein Minigewächshaus und Anzuchtsubstrat. Anschließend befeuchtete ich alles und das Minigewächshaus kam in die Growbox. (18/6 Licht bei 200-300 ppfd ) 2024-07-23 Durch einen Spontantrip welcher morgen startet, habe ich die die kleinen Heute schon in ihr endgültiges Zuhause versetzt. Zusätzlich habe ich ein Bewässerungssystem installiert und den Luftbefeuchter angeschmissen. Da es sich um ein kleines Experiment handelt habe ich Drei verschiedene Topfarten benutzt. 1. Cannpot - ein Topfsystem mit manuellem Bewässerungssystem ab der 2. Wachstumswoche. 2. Airpot - 9l 3. Stofftopf - 9l Ich möchte die Vor- und Nachteile der verschiedenen Topfarten für mich entdecken.
Likes
6
Share
Loading... Jah Bless
Likes
141
Share
💩Holy Crap Growmies We Are Back💩 Well growmies we are 56 days in and everything is going as good as it can👌 Afraid she's had some major issues but that's just how it goes folks 😉 she's definitely on the mend 👈 👉 Shes a short chunky little plant 👈 We got some very pretty colors😍 👌 She's got some odd colors kinda like tiger leafing,😉 Lights being readjusted and chart updated .........👍 Even with early major issues due to the soil/medium she's come a long way 👈 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14 NutriNPK Grow 28-14-14 NutriNPK Bloom 8-20-30 NutriNPK Bloom Booster 0-52-34 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈
Processing
Likes
28
Share
I wish I would of taken pics of them before I trimmed them up because they were a massive bush!!! At this point im satisfied with the number of potential cola's and size of the branches. I can already see preflowers coming from some of the nodes which is crazy because i've never seen any of plants in history doing this. Its also the first time i've taken veg past 3-4 weeks but mainlining does extend the veg time some. Today i've switched to 12/12 so next week will be the first update of flowering!!! quite excited to finally get to this stage.
Likes
5
Share
Veg day 36.- Happy girls seeing the sun for the first time. Additional soil mix is same as before. BX promix and perlite 2:1. Additional volcanic ash and worm castings. First watering was generic AB 1/4 strength, Rhizotomic and Mammoth P microbes. PH adjusted to 6.3 300ppm. Veg day 42 - after a week of wind and weather for the first time both seem to be acclimatizing well enough. A squirrel seems to like digging. Any suggestions for critter deterent?
Likes
13
Share
New week, new growth.. Will hopefully start the LST and Topping in a few days. They are really starting to grow. Fan leaves looking healthy and big. Girls coming with vigorous growth now, everything dialled in and happy. Just adjusting the EC/pH as needed when the girls show me the relevant signs/deficiencies if any. D31/D35- Decided they were in a good enough place to start topping the girls, all 6 topped and just some defoliation of the bigger fan leaves that are shading the growth shoots some HST was also done. We were also due a water change, so I cleaned the whole system just to keep things extra cleanly, very important in a RDWC system. I also switched over to a sterile system instead of using beneficial bacteria so I will experiment and see how this goes. Time to let the girls ecover before the next training session. Cruise control for now.
Likes
20
Share
Nice plants 2 totally different phenotypes, as one was already harvested, and the other isn't even half way of flowering after 10 weeks. Nice trichome production, great fresh and fruity smell, this plant is a pleasure to smoke in the end of the day. Dried her upside down hanging in a tent I have for the purpose, at 25c, 30%RH - Only removed fan leaves, no manicuring, been doing that as I smoke, noticed the bud lasts longer and with a better smell and you end up saving loads of time. Really happy with this smoke, smells like proper weed. Maybe was the best time I dried and cure(ing). Only problem is that I'm smoking more as it's so tasty ahaha. Good stuff, thumbs up! PS - I'll start looking for the "original" Zkittlez to try out and check the differences between them. Update: 12 April 2021 - Chopped down Plant #2 So, finally Saturday I chopped her down. She looked now ready and delicious, although I only notice yesterday how many seeds she has allover the place. She hermied in front of me without noticing, not good at all and need to start looking much better and in detail into the plants. Feel like an idiot now. Anyways, it was a full week! Emptied the grinder collector and pressed it down a little, makes a very nice smoke, light but pleasant, the kind of stuff it keep you going all day without the dumb effect. From all trimming made the bubble hash. Got a little too green as the 220micron bag's stitches slightly opened letting some contaminants in the final mix, hence the green color. This was a hit. in opposition to the grinder stuff, this sent me straight to the moon, really heavy stone effect, even thinking was hard. Reminded me those afghan/ moroccan balls we used to get back in the early 2000's. The weed itself it's still drying so the smoke report will be updated in there. 715g of fresh cut plant is good, let's see the potency and the seeds. Might turn it all into bubble hash, if I see it'll be an hassle to remove seeds. On an earlier bud I've cut and dried, smoked it and you can see pure white ashes in the bong. Ain't that a beauty?
Likes
Comments
Share
@Amboss
Follow
A champion Amazing plant… bulk for the win And huge colas Feed her until the week then start flushing
Likes
1
Share
The Big Detroit energy will be my go to Strain taste smell and appearance all there!
Likes
Comments
Share
Last week of Veg. Continue defollating from the bottom up. They be thiick.
Likes
14
Share
FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA (NEW) STRIVE NUTRIENTS 💪 Thanks for taking the time to read and check out my diary🤜🤛 FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍
Likes
14
Share
@eurorack
Follow
Flower sites on all plants are growing and multiplying, LST to all plants, full Canna nutes feed for all these this week at 2L per plant per week at the moment. Pink Kush plants are definitely smaller. Red Pure plants are growing well, the bigger pot seems to be the bigger plant which was what I'd hoped for. Lighting from the Phlizon LED Light is mostly on the Max setting with the COB LEDs on and the plants seem to be loving the intensity. Thanks
Likes
51
Share
Day 1: I got two of these Sweet Gelato seeds free from @Zamnesia. I’m only planting one at the moment . I’m really excited about growing it. I’ve really loved any Gelato I have tasted. I have my substrate prepared and my veg space is ready to go. I have put the seed in Ph’d water for 24hrs first and I will add to the soil tomorrow night. I’ll wet the soil down tomorrow morning with Ph’d water and I’ll put it the veg space with the lights on to warm up the soil before adding the seed. Day 2: Seed has been moved into the substrate and pot is now in Veg Space under 40watt CFL bulbs but once the seed germinates I will switch on the 200watt CFL. This is my least favourite part of growing, the wait for the seedlings 🌱 to break through the soil. I’ve planted the seed to one side of the pot as I find this makes LST easier. The plant will be spending it’s first 2 to 3 weeks in this veg space while I wait for my Purple Punch to finish in my main grow space. 72hrs Later: Houston we have lift off 🚀 The seed first started to peed through the soil after only 48hrs. That’s the fasted I’ve ever seen, hopefully it’s a sign of things to come. Leaves still haven’t opened but it’s fully above ground now.
Likes
28
Share
Hello my fellow growmies, Please find this week pictures and updates. I am into the final stretch with Runtz Muffin & Wedding Cheesecake. After this week I will put them onto ripen for there last couple feeds before I then start the flush process. The smell coming off these plants is ridiculous lol it makes the room smell like a fruity cake factory 🏭 🤣. Grape gusher is a little behind the other girls but that is fine because she is a giant with so many bud sites perfect! I will update next week. Peace and love people!
Likes
4
Share
10 days of darkness during the flush begins. Had great results with Wanda and her genetics. Blessed for a first grow. Cut Wanda down at the end of the week. She’s now drying. I will be giving a thorough review for my harvest diary. Excited to share what I’ve experienced and learned from this grow.