Recommended
Likes
Comments
Share
@usere
Follow
defoliation all fan leaves that cover other top sites and improve airflow and light penetration one each other. I will remove more leaves during week 5. watering schedule is the same, one times i watered with molasses about 2ml/l.
Likes
3
Share
@KcKush
Follow
*Increased ppm from 1050 to 1100. *growth is pretty big but not great. *cold temps are the problem at the moment. Seems to stay wet for to long.
Likes
26
Share
Hello Diary. Two new diaries. Hulkberry and Green Gelato, both Automatic. Many thanks to RQS for these strains, and I am very happy to be starting with the new storys. WHY HULKBERRY AUTOMATIC? HulkBerry Automatic is Royal Queen Seeds’ revved-up version of Bruce Banner #3 Auto. She’s one of the most potent autos you can get your hands on, easily outperforming many photoperiod strains in this area. Her compact and frosty flowers provide a THC content of up to 21%, enough to satisfy the most experienced of smokers. Expect a wave of euphoria to crash over you after a vape hit or bong bowl of HulkBerry Automatic. The strain is motivating, increases alertness, and gets the creative juices flowing. She makes a superb smoke when listening to music and watching films, or when indulging in your own creative endeavours. Overall, she’s an excellent strain for daytime use. LET'S START FIRST WITH THE FARM SET-UP: Box - Secret Jardin DS120W 120x60x178 Lights - MIGRO 200+ Ventilation - Blauberg Turbo - E 100 Fan - Oscillating Koala Fan Humidifier - Beurer LB 45 Soil - BIOBIZZ Light - Mix Pot - 11L Fabric Pot from RQS Seed - Royal Queen Seed Nutrition - BioBizz and RQS Organic nutrition I apologize in advance for the detailed documentation, or the large number of photos, but I enjoy it, and I think it will help others around tracking their plants. LET THE DIARY START OFFICIALLY: 10/06/2020. planting. I have prepared everything I need for planting. The 11lit fabric pot I got from RQS, also Organic Boost Nutrition and Mycorrhizza from RQS, Soil is Light-Mix from BioBizz and of course the seeds of the new strain Hulkberry Automatic. After adding 50g of pellets from Organic Nutrition and 5g of Mycorrhizze, I mixed everything well in the pot. After that I watered well and soaked the soil, I dug a hole with a wooden stick about 2-3 cm, I first put 1g of mycorrhize and then put the seeds inside. I lightly covered the hole with earth and put the pots in their new home. I planted two Hulkberries and one Green Gelato Automatic. The temperature was about 25 degrees and the humidity about 65%. 14/06/2020. She sprouted. After 4 days, Hulkberries came out. In the meantime, I sprayed the surface of the earth a little twice. The temperature is still around 26 degrees, thanks to the summer and the high temperature that enters the apartment anyway. I regulate the humidity with a humidifier, I maintain it around 60% -65%. 15/06/2020. Their first photo shoot, I also watered their with about 2 liters of water, which I only regulated p.H. at 6.3 with Plagron, Lemon Kick. 19/06/2020. Day 1. Hulkberries is officially one day old. On that occasion I took another photo shoot to celebrate this big day :). 24/06/2020. First Feeding First feeding. Their got a whole meal from BioBizz, Root-Juice, Bio-Heaven and Acti-Vera, p.H of water I regulated with Lemon Kick from Plagron. 25/06/2020. Day 7. End of the first week. For now, everything is great. It is developing nicely, its conditions are almost perfect. Hulkberry #1 - Day 7. - 9 cm Hulkberry #2 - Day 7. - 10 cm I think that’s all for this week, I’m happy that it’s starting all over again, following its development and looking forward to what’s to come. See you next week.
Likes
112
Share
@Dunk_Junk
Follow
So finally the harvest has started. Branches are harvested from the bottom pair upwards. Looking thru the pics again to write this, I remember feeling in awe of this plant. By node 4 they were very nice buds. Massive and dense. Node 6 and above is silly. Never seen anything like it. I had to take these pics because the 9" to 10" circumference on the buds, nobody would believe me 😅 Still got the main cola to do, got sidetracked doing other projects. But it will be done in the next couple of days, then to dry it all!!! Main cola trimmed and drying now...................... Sorry this update has been a while coming, i promise it's worth the wait. Dry weights in now starting from bottom node pairs and working up the plant: 29.72g 45.85g 54.91g 126.28g 82.51g 112.26g 75.24 Total = 526.77g !!!!!!!!! This plant is totally incredible. All lower buds apart from the main colas weighed 9oz... I was thinking another 2+oz main colas and nice buds. Well they was over 9oz too. Over 18oz from a single autoflower plant. Incredible, just incredible.
Processing
Likes
5
Share
Day 28: Happy days folks. hope we are all well and sane still. This week has been a good week for node stacking and starting her frost making it seems. She is a great size to work with now and has responded well to the stripping out of the lower larf and leaf. The airflow is perfect below decks now and allows air to move through the whole canopy and also light to make it through. Her buds are showing her Gelato 41 genetics with their appearance and are identical to the white flame like pistils. She is giving a slight terpene of sweetness and a little diesel too. Her stripping out had my fingers feeling a nice tacky , oily feel to them so she is certainly starting to nurture the budlets. Their golfball appearance is swelling daily and seeing how lose they are to joining up already , holds hope for some long chunky colas. She is approx 3ft now and a good circumference to her too. It is a safe assumption to think she will go the full 11 weeks flowering based on her parentage. The cross of these two strains is so far producing a perfect sized plant for my room and has given me the confidence to dabble in this area in the future I think. Gorilla Zkittelz/Blue Gelato41 is a good X and I know from another seed popped by a friend that Gelato41/Hulkberry creates a 5ft cola'ed monster plant. ( pic in my photos) and I still have crosses of Gelato41 and Cookie Kush , Gelato41 and Phantom O.g , Gelato41 and Orange Sherbet to run !!. I am fortunate to have a lot of these new beans now but I also have some amazing sponsored genetics running and some exciting testers still to do ( 9 more fast flowering strains to put through the wringer and try to identify !.lol) . Well that's another week down and only 7 to go for her. !!!!!!! she has a lot of big stacking buds growing time left. WATCH THIS SPACE !!!!!. Be safe people.
Likes
Comments
Share
I've been overfeeding so I'm flushing them for a week & then going back to the feed schedule I should've been using. 😪 They didnt seem too bothered by the overfeeding tho. 🤷‍♂️🏽
Likes
13
Share
@Sorrowcz
Follow
New light! Ledideal with vero 27 and samsung lh351h chips and lh301b http://www.ledideal.cz/led-grow-osvetleni/astroideal-vero-29-2/ New dehumi machine https://www.hotchilli.cz/odvhcovace/odvlhcovac-vzduchu-cornwall-dehumidifier-12l-24h/?gad_source=1&gclid=Cj0KCQjw4vKpBhCZARIsAOKHoWTIIRcjWgQbI9o5-AbsvXmwhyvZRzF3E-vvtWLBCZIC-6v_bcDccLEaAv1CEALw_wcB Girls looking stromy. Its 21days of flowering!
Likes
1
Share
Starting to fill the tent out nicely. Next time i will wait little longer to put in my net. These girls are stretching more than I expected.
Likes
Comments
Share
@xHide_BG
Follow
Good Strain .. it's not the best of all. but the experience is worth it. 😀I think it's a great plant to test xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxx xxxxxx x it's not the best of all. but the experience is worth it.
Likes
14
Share
10/15 This week saw a few snags. Both gorilla zkittlez girls are showing what looks like a Mg def i.e yellowing between veins and green veins themselves. This isn't the first time they've exhibited these symptoms. Currently the heaviest affected leaves are the lowest fan leaves farthest from the light. Aiming to keep it that way. I think it's pH swinging too low. I need to pay more attention to my feeds but sometimes I don't have the time to pH my water as properly as I should. The reason I say it's that and not a deficiency is because they are also showing signs of over feed (yellow leaf tips) only a one half-strength feed did this. There must be plenty of food left in the pot. I'm thinking the flip is gonna come at the end of the week. I'll clean up some lower foliage tomorrow or Sunday and let them grow the rest of the week. 10 weeks seems like a nice round number to me. More pics coming when I do my defoll. 10/16 added some pics and vids
Likes
36
Share
Processing
Likes
25
Share
First week flower underway. Added liquid Koolbloom. Way down on the base nutes, this and my other girls have been showing signs of a few things. 1.Nitrogen toxicity. It was commented on my last grow question that the leaves on my Gorilla Glue grow looked like they were heavy in nitrogen. I did the research and it looks like they were correct. Dry crispy leaves, heavy dark green. They and now myself blame the full strength Advanced Nutrients, noting they are high in Nitrogen. 2. pH issues. I also started noticing a lockout isssues, like red stems. I initially thought it was a strain specific trait, but again was recommended to test my runoff - it came out around 4.5🤮. Ive been watering heavy at 6.7 now with lime on top. Hopefully will help. Also, new Meizhi 450 on the way! Really impressed with my other one and the size accommodated my space very well. My flower room is like a L shape
Processing
Likes
12
Share
Everything smooth inside the 2x2. Running 24hr light expecting upward growth in week 4
Processing
Likes
13
Share
Getting ready to harvest one of the Purple Trainwreck plants next weekend. I’ve decided to harvest the mother plant this weekend and wait another week for the clone plant. Plants have been getting straight water for a little over a week. I did go ahead and harvest popcorn buds off the mother PT plant last week. I have struggled with getting the humidity below 50-60% in my tent so that being said, I also wanted to thin out the middle of the plant so the larger colas wouldn’t be blocked from light. The buds on numerous stems were touching and starting to stick together. I don’t want to get bud rot on any of my larger colas. Total harvest off the mother PT so far: Wet weight with stems: 3.75 Ounces Dry without stems: 30 grams Day 60-harvested another 1.25 wet ounces... not dry yet I have not touched the PT clone that’s in flower, I have another PT clone in my veg tent for clones. I also harvested some smaller buds off the Widow X Plant. I have two clones of this plant in my veg tent. Wet with stems: .75 ounces or 21 grams Dry without stems: .20 ounces or ~6 gram Harvested another 1.15 wet ounces. Not dry yet Setup: 24”x48”x60” tent Two 1000W Sunraise LED lights 6” Vivosun inline fan Two clip fans Plants are in 5 gallon cloth pots with happy frog soil and perlite. Nutrients: Fox Farm Dirty Dozen I have learned a lot with this grow, I’m excited to see how my future grows turn out. I have started a perpetual grow and have a second tent with vegetative plants. The newly flowering plant that was added to the flowering tent last week is a purple trainwreck clone. I think it will be quite the monster once it’s done. I have been essentially lollipopping this plant but not entirely. Any feedback appreciated!
Likes
101
Share
@FoTwenny
Follow
Fo' Twenny Back with another update on our GelatO.G from Seedsman. She is looking really awesome. She keeps stacking on the calyxes and getting frosty! Overall, super healthy with leaves "praying" to the canna-gods! Now, on with the deets! LIGHTING: Increased lighting at dimmer last week with good results. Was about 70k LUX on average @ Canopy. Turning it up a bit more this week. 8 Outer Boards @ 665.5w 6 Inner Boards @ 601w LUX APP MAXES OUT READING 78750 LUX @ Canopy. Lets hope its not too much! RHIZOSPHERE: If you didn't tune into the last update, I had just flushed pots due to high PPM runoff. pH of runoff was at 6.3. PPM and pH are tested using 2 separate calibrated BlueLab meters. All Water/Fertilizer is shared by 3.25 plants (.25 because autoflower gets less than a quarter the volume of the larger plants) 2 GAL PLAIN H20 w/fungicide prior to feed PH to 6.0 1 tsp/gal of Southern AG Garden Friendly Fungicide - Bacillus bacteria known as Bacillus Amyloliquefaciens (OMRI Organic Bacterial Innocclant/compare to Hydroguard) Waited 15 minutes after plain H2O and fungicide 5 gallon tap H20 through 2 KDF filters START PH: 7.5 (taken from reservoir that contains impurities/residue from previous feeds) START PPM: 500 (also taken from reservoir) TEMP: 76°F .125 tsp Ascorbic Acid added to help reduce chlorine/chloramine WEEK 4 FEED SCHEDULE: .5 tsp/gal Sledgehammer (Surfactant) .125 tsp/gal Gringo Rasta Cal-Mag 1 tsp/gal BIG Bloom .5 tsp/gal Grow Big .5 tsp/gal Tiger Bloom .25 tsp/gal Kelp Me Kelp You .75 tsp/gal BEMBE .25 tsp/gal Beastie Blooms (Increased due to low ppm of solution) PPM: 1150 Added to Increase PPM .5 tsp/gal Tiger Bloom PPM: 1350 PH: 5.8 1 tsp/gal RECHARGE .6 ml/gal MAMMOTH P PH: 5.9 PPM: 1490 Thanks for checking out my diary. If you liked this diary, check out my other diaries and give me a follow! Until next time... Peace ☮️, Love 💚, And Frosty Nugs ❄️🌲! -Fo'Twenny
Likes
45
Share
~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ ❤️💡🌱😽💨 We're back from vacation!! These did great on autopilot, of the 6 plants, these 2 are definitely my favorite.. a simple 4way LST when all tops come in level makes me happy 😻. they're still a little too dark/overfed so we're going super light for a while.. We raised the Solux350 a few inches as well, they're stretching fast... all other plants were showing early signs of cal-mag def so we adjusted strengths for everyone.. We have the Solux350 at 75% power, we'll keep it here until their flowering stretch is over and finish out at 100%...I'm really curious to see if resin production using 2835pro/Osram combo is comparable to what 301b/Osram does.. We have another 300watt using these diodes and that tent is a frost factory lmao..not too much else to report, it was nice not returning home to dead plants lol..thanks as always for dropping by and happy harvests everyone!! 🤘😼❤️🌱 ⚡Hortibloom/Solux 350⚡ Specifications ⚙️: Diodes: Samsung LM281 Pro / Osram DR (1,440 total)💡 Driver: Inventronics 350 watt🔌 PPF: 1015 μmol/s ☢️ PPE: 2.9 µmol/j 〰️〰️ Lifespan: 50k+ hrs ⌛ Weight: 14.3lbs lbs (6.5kg) Veg Coverage: 5 x 5 ft 🌱 Flowering Coverage: 4 x 4 ft 🌼 -Uses an aluminum heatsink (no fan), quiet while operating 👂⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 -May be daisy-chained via RJ14 and managed from a single controller 💡~💡~💡~💡~💡 🌎 https://hortibloom.com/products/solux-350-led-grow-light ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_
Likes
43
Share
@Sejnik
Follow
Biobizz květy se od posledního týdne o něco zvětšili a vypadá to ze ještě trochu porostou. Zvětšil se i objem pryskyřice. Vůně ale není moc výrazná. Florganics nevykazuje nějaký pokrok ani po přidání dodatečných živin. Rozdíl můžete vidět na fotografiích.
Likes
3
Share
Quick update I know I been MIA..diary label xmas tree got deleted after losing the mother tree(die back)and about 80 cutting(weather) 1 of the cutting which I took before from the mother that died is the mother to set 1 and 2 (29)...took some cutting off of set 1 (30) jus waiting to see how rooting goes...mother tree jus hit the 2nd week of flowering will update with pic in week 2