Well i ran into some problems, water temps too high over the weekend (i wasn't there) but roots and plant still looked healthy despise 24,5°C water temp over 2 days. I added 2,5ml each Hydro A & B on day 15. EC rised to 0,89 / PPM 445 and two days later ppm still the same i guess because the only part of the root touching the water couldn't uptake any nutes because of the high water temp? (everything above the water looks healthy af tho) Since my apartment is usually really hot in the summer i bought a TEC peltier water cooler + pump and a thermo regulator to ensure the water temps will stay between 20 and 21°C. i just need to wire that up and diy saved me me a lot of money. i payed about 100€ and have automatic temperature control and a cooler from amazon about 200+ € so i think its fine. I'll show you the set up once it's completed and works. Its the best budget cooling i could get my hands on imo. Today is Day 19 my parts came and i really managed it to half ass wire shit and not burning down something. wish me luck. I payed a total of 93,22€ and now got a really quiet, 150w DIY Peltier/TEC) cooler that automatically turns on once the water temp hits 21°C (69,8F) and stops when hitting 20°C. So far its working REALLY well. like im amazed and so proud i managed to do that and it was pretty easy. i had big problems with temps in my attic flat and water temps quickly rising to 24° and more which means root rot. Since i use the cooler all new roots just looking healthy as fuck. the plant is growing well and i see every day progress. So i saved a shit ton of money. the cheapest water cooler i could find on amazon was around 350+€. Sure it bet it works better, is safer to touch, not very likely to cause burning down my house because i had to twist copper wires together and let 230V run trough it BUT no way i have that much money for things like that. The cooler cools water temps from 21,5° to 20° in about 15minutes. the longer it runs the better it cools. i bought a temperature controller outlet ( 25€) which let me set 2 temps and it turning the cooler on and off. I had to cool it down manually every 2 hours before with frozen water bottles💀 So here are the stats for day 19: Water Temps: 20-21°C / pH: 5.42 / PPM: 485 / EC: 0.96 / height: 2,5cm (lol) (i added some more Hydro A and B because i thought i maybe see some nitrogen deficiency) i bet i will see some RAPID growth now since everything is dialed in, hopefully lol 150g im coming!

El olor a piel de naranja está en toda la habitación, planta con un aroma único.

Thank you. Growing cannabis is an art that seems to evolve as you learn it. While it may only take a little knowledge to get started, It seems that this may take a life-time to perfect (doubt I'll ever make that category, but I will certainly try). So thank-you to the community that Shares, Comments, Follows, and Likes. Your efforts in any of these actions make these journals a worth-while and perfect way for us all to learn and track our efforts. I personally appreciate it. Also a huge Thanks has to go out to Grow Diaries for making this community even possible. Your efforts to supply the data storage alone is more than enough, but you the fact that you dont stop there and constantly try to improve the experience even more makes this my favorite community to to share on. And then lastly, but certainly not least, a heartfelt Thank-you to Royal Queen Seeds for your branding/research while making these seeds available to people like me. It gives me confidence in knowing that I am working with great genetics before I even start my grow. ---------------------------- Germination Start and incubation period 3/12/24 to 3/26/24 Transfer Day to Veg Day 6 3/27 to 4/2 Germination: First note was about the appearance of the seeds. They were smaller than I am used to seeing, but no damage or deformities and look to be in good shape. Germination took 14 days from dropping in water to transplanting into 1 gallon pots. 23hours in a glass of 6.3ph room temp RO water. 2 cracked open a little and I placed them both in paper towels wet with the glass water and pasted to the sides of the glass for 2 days then checked, no progress. So I freshened the water then waited another 2 days and checked, little to no progress. Then checked again 1 day later and finally was able to move them. One looked fully ready and the other seemed less ready. I placed in rapid rooter pods and closed with toothpick tips. 1 popped out of the pods in 1 day but the other did not. So I gave it 1 more day and started my spare seed. After 4 days of water and towels I replaced the dead pod with a growing sprout. Transplant occurred on 3/27 Veg Day 0 to 6 1gal hard tall pots. Transplant went well. The sprouts are smaller than I would like and seem to be stubborn in growth to start but hoping htat changes with soil. One pod was overgrown in the pods and Im hoping it doesn't reflect in the overall plant production. Video: Transplant ease. Transplant to 1 gal pots: I am using a 50/50, 50%perlite/50%soil with a .5lb of dolomite lime and a .5ml of flora micro added to .5 gallon of RO water (Im mixing 2 gallons of soil total so the water to soil ratio is 1/4 of the total medium volume) to achieve a soil tested ph of 6.4. I am using a 50/50 soil/perlite mix because I plan to use these in auto pots. I also used about 1 cup of the same soil mix water to pour around the plant after transplant; you can see how the perlite rises to the top where I did this. I sprayed two domes and covered - I plan to leave covered for the first week. Feed: I kept them under the domes and sprayed every day that I didnt feed them, to keep humidity up while I let them find water in the soil. By the end of the week I took the domes off and took pictures. Feed this week was another 1 cup of 6.3ph water 5 days after transplant. Feed plan next week will increase the amount to 2 cups of plain-no-nute water with about 4 days between feeds. I want to see the water run through so if I need to use more than 2 cups I will. The idea is to water deep and through, but then make them search for more before the next feed, hopefully spreading the roots out while doing it. Veg Plan: I plan on 8 colas for each plant. So that will be 3 topping days and a total of 7 cuts. I will want to cut the first time on day 21 if I have 5+ nodes. I will transfer to 5 gallon auto pots with-in 1 week of the first topping. Once I have 3 nodes of new growth past the first topping, I will top those two branches to the first node again. (that's 3 cuts total by this point) Then, after 3 new nodes of growth after that, I will do a last topping on the 4 branches. (4 new cuts added to make a total of 7 cuts and 8 colas) I will train the branches using LST/HST with tie downs as soon as I can after the first topping day to help maintain the branches growing where I want them to. I will also introduce an adjustable tomato ring after they have settled into the 5 gallon forever pots to provide support and mobility Hopefully all goes well, and I will have 1 to 2 weeks of growth before flip after week 8. I think it sounds more ambitious than it really is, but if you follow this journal, we will see together.

Hello fellas!🙌 Here again with a late update, all pics are from yesterday (6.2.16 Monday) so D.64 first day of w.10 On Sunday gave them their tea. receipt is above. Mephistos are sticky, Fastbuds are rock hard. They have problems but they are growing nicely I'd like to tell tell some fancy words like "there are couple of weeks more to chop this beauties..." and etc. but don't have any idea 😂 watching and learning...Some have few ambers, checking ambers from pics and trying to figure it out when sweet end will come... Yeah, there is a bonus pic. a DIY rosin press, i haven't done any concentrates before :D it's name is "QUICK DAB" This lil monster can press 250kgs (550 lbs) 😳 Waiting for WhiteChem, she looks OK for pressing 😛 Damn she looks so frosty see you on next update guys Peace!!

A Nice sweet smell !!!

Overall very happy with my third grow. You learn a lot every time.

Bonjour à tous , Comme vous pouvez le voir tout vas bien , et ça grandit de plus en plus... Gros palissage pour la "Black Domina 0" , 3 jours sépare les deux photos , tout vas bien ! En pleine forme :-) Rien à signaler pour cette semaine , pas d'avancer sur la floraison... Nous sommes toujours sur des plans au stade de végétation voir certains en près floraison mais c'est léger....

Getting huge, starting to dense up and smell real good, make sure you get your plants out to vote!!

Buenas a todos! La planta es una bestia! crece muy rápida y con mucha fuerza, estoy muy sorprendido. Gran genética y buen feno, un lujo...

Empieza a desarrollar una estructura muy vertical y apenas ramificada.

Second week of flower and the girls are stretching nicely. One week/ten days of that still to go , I think. The Orange Sherbet has given me hope as she blew up in size . Definitely going for less plants and bigger pots on the next run.

Thirsty bitches

Not sure if these 2 are auto plants? The blackberry are flowering quiet obviously, but these 2 are either really slow or I accidentally bought non autos. Anybody help? Cheers

June25:🤦‍♂️🏿🤦‍♂️🏿 June27: the lizards have attacked again... for this... today we are going to raise the girls and place a mesh June28: I have no idea how they did it... but they got in again!

Let’s go! Starting indoors and moving outdoors in early veg due to pests

I didn't post week 4, due to my job! I don't know if I'm doing right, I'm not an expert, but my plants are in the pre-flowering phase, all in all I'm very satisfied for now! With time and experience, I will definitely be able to make more beautiful plants later! Any advice helps me! if you have something to recommend, do it, I'll be happy to learn how to improve my crops!

We are nearing the end of this journey with the 5 White Widow Autoflowers from ILGM genetics During week 12 Continued watering with regular PH'd water every 2 to 3 days. Checking tricomes with a jewelers loop every few days. The plants are smelling super potent now coming into week 8 of flower! Buds are super resinous and extremely sticky. Week 13 Last week before chop! The plan is to see how the plants look nearing the end of week 13. My current grow tent is the same tent I use to dry so this may get tricky! ILGM has grow time listed as between 10-14 weeks so Im right in that final phase. Stay tuned for up close shots of the final stage of these plants. I will include final photos, wet weight, and final dry yield in upcoming posts. 👽

The cheese looks ready, all pistils have changed.. but she's small. Pistils are changing on the rest (45-55% white), will be trying to use this microscope more to check the trichs but I struggle to get them in focus 😟 Going to start reducing the MC starting tomorrow, roughly 2 weeks left, will flush with ph'd water for the last 2-3 waterings. These girls are sticky, sweet, fattening up and looking really nice Stay high, and stay tuned 😁