Day 32 - Heater was blowing directly on a couple of the leaves that turned brown. Cut them off. Raised lights up again. I think my development is a little slower than others but I have had a lot of trial and error. Day 33 - added tomato rack for LST. growing nicely. Day 34 - Stopped nutes as I was getting a little leaf burn in lower leaves. Looks good otherwise. Lights are dialed in. Day 35.- This is what too much light looks like. Day 37 - Switched to the grow light. Moved the heater. Growing nicely. Day 38 - Lights dialed in REDUCED water. Stopped watering for 2 days. Day 39 - Full Lights on now. Put more holes in the pot. Draining nicely now.

The leaves are weird on some branches. Also have lits of gnats. How do I rid of them?

Week 14 for Space Panda by Atlas seed, They have finally 2 weeks later almost started to get some better growth after the topping. She will need atleast 2 more weeks of veg if not 3 before being flipped to flower.

Week 1 was smooth, didn’t tKe good pictures at first. Trying out a new set up before transplanting to the big tent.

Week 16 looking lovely

And the time to defoliate my freak tester as come, not that she needed that much but since i went in for the rest my giraffe went along with them all, she is lovely with her freaking weird leafs all over lets hope she likes defoliation hahahaha cut my CaMag , figure if she is with a N block of some kind this will help, and she does not need it in flower any way so lets see And a few days in to defoliation done and she is happy and never before, mb i should have done her sooner , she starting to put up with an amazing trichome production, this will be an amazing one for extraction mb lets see And with the week coming to an end she is defiantly happier than she was before i spank her a bit , supper happy with this extra tall girl that aims to the moon As always thank you all for stopping by for the love and support and for it all, i truly appreciate it all <3 <3 <3 Genetics - Fast Buds Tester 2308 Ligth - LUMATEK ZEUS 465 COMPACT PRO 
Food - APTUS HOLLAND #aptus #aptusplanttech #aptusgang #aptusfamily #aptustrueplantscience #inbalancewithnature #trueplantscience #fastbuds #dogdoctorofficial #growerslove With true love comes happiness <3 <3 <3 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so <3 <3 <3 
All info and full product details can be find in can find @ https://2fast4buds.com/ wen released 

https://aptus-holland.com/
 
https://autopot.co.uk/ 

https://lumatek-lighting.com/ Have a few good more diaries going on fell free to drop by and say hi <3 <3 <3 <3 <3 <3 Growers love to you all <3 <3 <3

Seem to be going good so far...

Over the last week I was stressing over overcrowding but I seem to have got this 12-12 timing correct as the stretch has come into play so I’m pretty sure by Friday I’ll have pistols and be able to call it day 1 in flower! I have a nice sea of green coming on now too and as I said I won’t trim anything or top as I want to grow naturally (organic)! If you like hit me with a like thank you buddies merry Xmas! These fastbuds are amazing and have shown why they are a top breeder! Can’t wait.... I’ll flower for Their photoperiodic times and flush as according! It’s all exciting! And anyone following just got to pop out will update my other diaries at around 4-5pm GMT

The temperatures, humidity, height, and watering volume(if measured) in grow conditions are all averaged for the week. The pH is soil pH. Any watering done by me is well water which is 7.6 pH and 50° F. Any listed nutrients are ml/gallon of soil to be spread evenly on top of the soil. Day 1 we had early morning rain followed by mostly cloudy skies. High temperature was 77. The rain took care of the watering today. I'm treating with arber again and more defoliation. Day 2 we had a high temperature of 81°F, skies were partly cloudy, and I watered 3-4 gallons from the hose. Day 3 we had a high temperature of 83° with sunny skies. I watered 4-5 gallons from the well. I removed leaves with powdery mildew and treated with Arber. Day 4 we had a high temperature of 88°F. Skies were clear and sunny. The humidity was around 90% today. I watered 4-5 gallons from the well. I finally got most of the infected leaves off. I treated with Arber again today. Day 5 we had high temperature of 89°F. Skies were sunny. I watered about 4-5 gallons with well water. I've been treating these with Arber biofungicide but it's hasn't had much affect, except on #1. I stripped all the infected leaves. I'll treat these tomorrow with growers ally fungicide. That should clear them up. Day 6 we had a high temperature of 86°F with partly cloudy skies. We're expecting rain tonight and it's super humid today. The weather is not cooperating while I'm treating for powdery mildew. Day 7 we had a high temperature of 84°F. We had intermittent storms and showers throughout the day that took care of the watering. This week was a success. The weather has been terrible for cannabis, but these girls are thriving. I had to treat with Arber biofungicide and then Growers Ally fungicide(both organic).It cleared up the powdery mildew and these girls are ripping.

First week of flower, looking good so far in the first few days. Really noticing it stretching out and the tops are popping more now. Very excited to see the whole flowering process. The bloom nutrients when mixed with the kelp and calMag brings it to exactly 6.5pH I used to have to use pH up with the grow and down still for straight water as my tap water is 8.3pH Added in a Friend (Bloody Skunk Auto) for a hydroponic grow but took out a few days later and moved under my desk to give it a 24hr light schedule to help get her going and move back in after a week and leave in there. Plant has been doing fantastic this week, no longer seeing any issues. New growth looks great. She's looking really good. Been watering 4L every two days and feed every 2 waterings. Using CalMag with straight watering feeding. 540ppm (baseline tap water is 298-320ppm) Adjusted second fan to blow better on the very top. Haven't adjusted the lights and let the plant grow to it within 30cm distance as recommended by spiderfarmer. Will start to raise next week as plant grows taller to maintain the distance. No signs of tacoing so just leaving where it is.

Wow oh wow 🤩 to start I’ll say I’ve been very careful watching the feeds timing them almost perfectly! Also was a struggling week with humidity! Lucky I have my tricks to keep it down (no dehumidifier) 😊 I use air control 😉 (in the house) air control in the tent is perfect or next to perfect anyway! The aromas are continuously getting stronger and I am in for a treat! This time is my best time! It just shows! But every next time is my best time as I only get better at this!

december 20th gave her half a gallon of dechlorinated tap water phd to 6.6 with 1/2 tsp of bloom nutes to each 3 gallons of water. runoff tested at 6.3 ph. she was showing a few deficiencies

Hello everyone week 1 of flower has passed for this Gelato auto 🍦 Spider Farmer SE7000 80% have a great day and wish you all happy growing 😎👨‍🌾🏻

This little orange sherbet was topped on day 10 and is growing well. I ran out of calimagic due to a shipping issue. I was hoping that tap water would give them enough cal mag but the plants started showing rusty spots symptoms of calcium deficiency. The only cal mag that I could find locally is Gringo Rasta from fox farm. I gave her a dose of it but it is too early to tell if it is going to work. I am skeptical about any organics in my system from past experiences but the pH is holding steady after a couple days so hopefully it will work out. Other than that they are still getting 24 hour light and I am starting to think that I might have to figure out a way to spread the plants further apart. A couple of them are getting pretty big.

Greetings my dear Jungletamers, So a major surprise came when @MarsHydroLED contacted us and asked if would like to try out their new SP 3000 light. Being a fan of Mars Hydro for years, we of course accepted their offer. We are totally in love with this light. I was when I saw it in another grower's setup and was in awe of its output and results. So with much pride and thankfulness for the presents the Universe bestowed on us, in the form of MarsHydroLEDS offer and the bountiful harvest of the last grow, (which I am thoroughly enjoying btw, such a great weed to have grown ourselves) we start out on a new adventure that we can't wait to share with you. With many lessons learned from the previous grow, a mighty producing strain in the form of Expert Seeds Gorilla Glue #4, a.k.a Expert Gorilla's and a tweaked super soil mixture, we are setting out to hopefully get over a gram per watt, preferably 1.5. The Setup A 4.5 (140 cm) x 2(70) x 6.2 (200) grow tent, giving me a .98 m2 workspace. This space is customized to my needs. A standing fan will provide airflow through the whole grow, a top fan will help guide cooler air past my lights onto the grow. 3 56 ltr pots will be the home for the plants when they are 2 weeks old, up to then in smaller jars. The Light The leading role and star of the show will be played by the Mars Hydro SP-3000, so kindly provided by MarsHydroLED, which we will test and review here and I might say, endorse. I'm very careful with who I endorse and support these days, but a company with that many wins in design, I'm talking ever since their first range came out in 2009 these guys have been raising the bar for the whole industry, I did not hesitate to support this leading brand. If you want to compete with these guys, you better bring some quality AND affordable pricing. Why do I endorse the SP-3000 without ANY hesitation? It is seriously THE BEST light on the market in this price range and size group. It has an enormously effective output in U/Mol and with 30% less energy waste comparing to older LED lights. Prove me wrong! And with a company holding a considerable market share selling thousands of units every month, competing on price and quality, one would think that customer service would suffer. Of course, also Mars Hydro is not perfect, but check the sheer amount of people that not only praise the light but also the service received, should the light somehow not perform up to par. It is this dedication to their customer base that made this company have a fanbase... Yes, a fanbase with a website and a wiki. So if you are looking to buy new lights, check out the END OF SUMMER OFFER at the Mars-Hydro Global Store on Aliexpress: https://marshydroled.aliexpress.com/ 👈 Check their offers but also their score, they ship from a warehouse near you so you don't have the extra import fees!! Cut out the middleman and have a deal on these lights!! At the moment I write this in August 2021, the lights are 408,20 euro when sent from Germany to the rest of Europe, that's 40 euro cheaper than the other Mars outlets, BUT EVEN 60 euros cheaper than ordering at a grow store!! The Strain: Experts Seeds - Expert Gorilla feminized regular. Don’t let the name fool you because Expert Gorilla is suitable for growers of any skill level. However, you do need to be an experienced smoker because Expert Gorilla is one of the most potent strains on the market. Lineage: Chem Sis x Chocolate Diesel x Sour Dubb Popularity: Extremely Popular Flavor/Aroma Profile: Chocolate, Earthy, Fuel Yield: 400 g/m2 Stress Tolerance: High resistance to disease Potency: 24% THC Flowering time: 58 - 63 days The Soil: Those who saw my Monstercropped Gelato #33 grow (you should see it if you didn't, I'm so proud of that grow), know about my super soil and organic nutrients/ permaculture tea combo that starred in my previous diary. Because of the great results, we are going to use the same recipe, adjusted some more with some new ingredients that will complete the mix and give an even more sustained super soil buffer. 20% Atami Bi-grow (very similar to ocean forest) 20% Atami worm castings 20% Atami Coco Coir 10% Hydrocorn 10% Peat powder 1 cup Fossil seaweed chalk 1 cup bonemeal 1 cup bloodmeal 1 cup Microlife 3-4 teaspoons of epsom salt 3 cups of activated biochar (activated with our own permaculture tea) I just made layers, starting with hydro corn on the bottom to aid airflow/run-off. On this I started layering the coco coir, Bi-grow, peat, castings, and amendments in a way that the more mature the plants get, the more phosphorous and less nitrogen they will find. Every time I made three layers, I would mix them by hand. This way we simulate natural soil, which consists of humic layers, composting plant waste, fungal and microbial life, and nutrients from fossilized sources. The Nutrients I will start with just adding 6.4 PH water, although this soil should buffer ph itself and regulate, after 4 weeks, I'll slowly be adding: - Biobizz Grow - Plagron Alga Grow - Biobizz CalMag - Biobizz Flower - Plagron Alga Flower - Biobizz Topmax - Melasses The Tea Some of you might remember the permaculture tea from my previous grow, I have a short video in my harvest page showing how we make it), it will star again in this grow. - (Rain)water - Comfrey (whole plants) - Dandelion leaves - Roots and leaves from the earlier grow - Minor periwinkle (Finca minor) is a plant we have in our garden, it contains an alkaloid that is associated with increased brain function but also is a light toxin for wee beasties and other unwanted guests like gnats (who hate it). - When flowering I add some wood ash to this mix Thank you for checking in on one of my grows again! Thanks for all the love on my previous grow, check it out if you haven't seen it!! Hug Bud

Comenzó la floración 👨‍🌾🏻🍀🙏

Week 11 now and this beautiful Gelato Auto is starting to get thick.

Nach nur 3 Tagen gekeimt, FastBuds Qualität... Eingetopft in den Endtopf.. Bon Appetit little Madame Apricot!!

So, now I consider the little ladies are entering the vegetation phase, leaves are getting bigger and they are more aesthetic now in relation to the stem, Still under the t5 light, the chocolate almost touching the lamp but no problem with that. Just put them inside of a card box, more warm and I think they react nicely to that :) maybe one more week and they're going to the 10L pots and under the 400w agrolite, and we reach the pure grow phase ;) . What do you say?! Thanks for your time and happy grow to everyone! Little update 13/03 My babies still growing nice, no problems or at least no big ones... I think the marks on the chocolate leaves are dissapearing, she's doing it :) The spirit is on its way too, super healthy. Update 16/03 So! First feeding for the little ones. Actually I put 1ml in an half litre bottle and gave them just half bottle cause about 20% of water run out and I think that was pretty enough for now. I want to go slowly on nutrients to make sure they accept it well. Bye bye! Update 18/03 They are loving biogrow, no problems. The transplant day is coming, I need to find the best moment to do that.