Got a new light this week, it's basically a HLG 260 R-Spec except locally manufactured using the same Samsung LEDs. Big Mumma got her 60x60cm tent today and will go in there under one Viparspectra 300W blurple (130w from the wall). I trimmed her, super cropped her main stem and added a scrog net in preparation of flowering her in the next couple of days. Because my other plants were getting up past 75cm after 7 days of flower (100cm is my absolute max) , I decided to supercrop the canopy back down to about 60-65cm - it was pretty scary and I definitely broke the outer stem on some of them. Also gave them a good trim. Fortunately most bounced back strong the next day which are the most up-to-date photos you see (17/4/20).

17 sept Maroc was chopped this week. The girl suffered from the endles rain we had last 10 days, enevitably she got mould. Not fully ripe, another week would have been best. Still some nice trichs and i will probably end up making hashish from this one. As do all off the female seed strains this year. The combination of early flower and the september rain this year took its toll. Biggest buds were harvested on wednesday and rest of plant saturday. Drying now in less than ideal conditions. Fingers crossed. Hoping for better weather for the weeks to come. Lemon kush and the others really needs some more sunshine to finish

Week 21: August 16 2020 - August 22 2020 Great week, weather-wise except for some strong winds in the middle of the week. Some branches and leaves took some damage and went a little limp, but they all seem to have bounced back. Still more yellowing, I'm pulling dead leaves off the plants pretty much every day. I know it's natural and it has been a bit cooler at night recently, but I'm still a little bit concerned. Other than that, new growth is coming in strong, has a nice green color, and the little buds look healthy so far. First full week of flower under the belt. Thanks for stopping by. Cheers!

Vegetation: To keep temperature and moisture on optimal levels at around 23°C / 65% I'm using two mechanical timers. - 24/7 on: Fans and water pumps (+Ventilation after 3.11.) - Timer 1: Lights and Humidifier 18h on / 6h off - Timer 2 (BROKEN 3.11.): Ventilation 18h (15min on / 15min off) / 6h off NOTES: Everything looks good and the roots have appeared from almost every (11/13) rock-wool cube. From now on I'll mostly water the plants from bottom by adding the wanted amount of nutrient solution on a plate, and then placing the plant on top of for ~15seconds This week I'm also starting to prepare the hydroponic systems (2x NFT-GT90, and 1x EBB-flow I think) and stronger nutrient solution since my plants are becoming ready to be transferred. Spreader-mat is the base of my plants when I have transferred them in to the hydroponic systems. DO NOT place more than one layer of the spreader-mat as it is not meant to be used like that! As you're cutting the mat for NFT's, be aware to have some extra for your peace to reach nutrient solution below the tray. That way you won't get noise from water dropping when systems are turned on. Day 15 (1.11.) Day 16 (2.11.) First watering with a bit stronger nutrient-solution (~ EC 0,6 / pH 5,9) than before, starting with 50ml/plant and watering once from above. Slowly increasing EC to 0,8. I cleaned and assembled 2 out of 3 hydroponic-systems which I'm going to use. I'll do the same also to the last system, but it currently has my plants on top of it so I'm going to do it later. I want to make sure that my plants have built healthy and big enough root system before transplanting to hydroponics. I'm waiting for the rock-wool cubes to be bursting of roots so they won't drown on their first day in hydro. Also, as the plants are bigger before the transplant, I'm able to fill my nutrient-solution tanks full with correct strength nutrient-solution for Mid-Vegetation from the start, therefore no need for that much adjusting later on. Day 17 (3.11.) I noticed my other timer which controls the lights had stopped working... The lights were on when they shouldn't have been, I noticed it an hour after they were supposed to turn off. I think I caught up to it early, but it may have been on for maximum of 2 days straight. No worries there since on vegetation-phase the plants don't necessarily need any sleep (Even though you should avoid quick changes like that!). Roots have appeared from the bottom of every cube and plants are looking pretty healthy. I think they are almost ready for hydroponics. Day 18 (4.11.) Few plants are showing symptoms of nutrient deficiences or some sort of sickness, not certain what exactly. I'll be keeping an eye on it. I'll be transferring in to hydroponic systems in maybe a week, so I don't want to stress my plants more than what's necessary. Increased my solution strength to 0,9 EC with a bit more Cal-Mag than before, and watered the plants for 50-150ml each plant depending on weight and size. I'll be slowly increasing the strength by around 50% during upcoming week. Thanks for tips! Day 19 (5.11.) Day 20 (6.11.) Plants are recovering well from deficiences and I just transferred all of them to hydroponics. I don't have the water pumps on for 24/7 just yet, at this point I water them a couple times a day by keeping the pumps on for somewhere around 15min at a time. Lights are now set to 60% and I also added a tower fan to circulate the air and shake the plants. Day 21 (7.11.) Lights are now set to 70% since the Led's and plants are spreaded wider in the tent than before. Distance to plants stays the same at 75cm.

Hello everyone, Even tho I've been busy around the house this week, I took a few minutes and transplanted these into 5 gallon fabric pots, get them going early in some super soil. Lets see how they turn out. Ill have better picture's for you guys next week... See you guys next week...

Day 36 Done nothing just let them grow and trimmed a few leaves Day 37 - watered them with feeding. Decreased the amount by 25% except the base nutes. Added 12ml CalMag on 4L water by request of the community. If leaves curl down more, I will consider a flush. Day 38 No feed. Color changed from the middleone overnight, I think that’s a good sign. Maybe someone can comment on that 💪🏽. For me it looks very good, I know a few leaves show signs of nutrient burn but I decreased already and no new signs appeared Day 39 No feed until tomorrow. Day 40 Fed them with very low amount of fertilizer. I aimed for a ppm of 1000 but I went a bit higher until I have osmosis water . Runoff ppm was 2000, but I have to say I am measuring ppm since this week and will fix this problem Day 42 No feed

This week started strong. Some small concerns due to small orange spots appearing on fan leaves which on researching indicates a calcium/magnesium deficiency. Will add a small amount of cal mag to their next feed

Day 16-27/12/21 doing very well!! Day 20-31/12/21 all looking good just waiting for space in my other tent so I can move half of them!!!!

All in all this was an amazing harvest I usually have around 8-10 plants and harvest anywhere from 24-36 ozs per harvest with the 8 plants I had this harvest including the biscotti mintz and cookies USA I ended up with 898g total dry weight with all top quality flower. I’ve learned some things with all my previous runs when it comes to dialing in my quality and yield and definitely watching for those herms because I like to push my plants to the max when it comes to training ! GMO PUnch -Greenpoint I’m giving this a total score of 7-10! Biscotti Mintz- Barney’s farm Total score 10-10 Cookies USA score 7-10

📅 Week 13 | Days 92–98 📅 🌼🌸🌺 Flowering Phase 🌼🌸🌺 Day 98 🌞 🔸 Poison Envy continues to develop beautifully. The buds have become noticeably denser compared to last week, with an impressive amount of resin forming. Trichomes are mostly milky now, with a few still clear - no amber ones yet. 🔸 The smell is evolving too: still that strong musty "forgotten laundry" funk, but now with a distinct sweet-spicy berry twist, almost like overripe blackberries. Very pungent! 🔸 Unfortunately, the humidity is still too high, but better than last week (currently 63%), which could become a problem. Today I finally turned on the dehumidifier and increased airflow using all clip fans at max setting. The dehumidifier now maintains a constant relative humidity of 50-60%, which I am very satisfied with. It does make it 2-3 degrees warmer in the tent, but I can live with that. 🔸Now give them 1-2 weeks of overdrive from AN and then only water. She drinks significantly less. 📈 Current Conditions 🌡️🔆 = 27°C 🌡️🌜 = 20°C 💨 VPD Target = 1.4 - 1.6 💨 Humidity = 63% → Target: below 60% 🔦 PPFD = 900 µmol (12/12) 🔦⌚ DLI = ~38 🛠️ Setup (unchanged) 💡 Lights: 2 x Sanlight Evo 4-120 @ 90% ⛺ Tent: 120 x 120 x 180 🍯 Pot Size: 18 liters 🌱 Medium: Bio-Bizz Light Mix 💊 Nutrients: Advanced Nutrients 💧 Water: Tap water (EC 0.5)

Que hay familia, actualizo la segunda semana de floración de estas Runtz F1 automáticas de Zamnesia. Vemos que las 5 están en perfectas condiciones, tienen un buen color y van creciendo a buen ritmo. Empezaron a brotar flores hembra, ya estamos en floración. Empiezo por supuesto abonando una pequeña cantidad de la gama Agrobeta. La temperatura está 25 grados y la humedad anda entorno al 50%. Riego cada 48 horas. Hasta aquí es todo estas próximas semanas veremos cómo van avanzando. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Os comento que tengo un descuento y para que compréis en la web de Zamnesia de un 20%, el código es ZAMMIGD2023 The discount 20% and the code is ZAMMIGD2023 https://www.zamnesia.com/ Hasta aquí es todo, buenos humos 💨💨💨

This is my 2nd grow of Runtz Auto by Zamnesia. It's a fairly compact strain, smells fruity and this go around smells very similar to poison strains (red poison, Durban poison, ect). I believe the terpene is terpinolene. I wish I could test it😅. Anyways, She was chopped on day 80 Spent 7 days drying Yield: 2.02 ounces dry weight Huge thanks to plagron and Zamnesia. Thanks to the eternity Grow Cup. It was an honor. 🙏

6/13/2023 Week 10- Day 1 of Flower (Day 131 overall) (Day 70 of Flower) Auto Pilot Day 6.. Checked the Trichomes and the bud density and both are looking good.. Definitely needs a little more time for the Trichomes to be where I like, so based on my check I think we are still looking right around the end of the competition 22June to be done and ready for harvest. I do like that the fade is coming in the leaves nicely, so my chart I think is dropping off the Nitrogen exactly like it is supposed to. 6/14/2023 Week 10- Day 2 of Flower (Day 132 overall) Auto Pilot Day 7.. Decided I would take some contrasting pics today with my light up to 100 and my light all the way on Dim. I hope you enjoy the pics. 6/15/2023 Week 10- Day 3 of Flower (Day 133 overall) Auto Pilot Day 8.. Decided to take a look at the Trichome's today and Check to see where they are at and honestly if I might ho ahead and start my flush tomorrow and harvest on Sunday. 6/16/2023 Week 10- Day 4 of Flower (Day 134 overall) (Day 74 of Flower) Today I pulled an Armageddon however instead of darkness they are going to get 48 hours of light. The reason why they are going to get light instead of dark is when I was taking out the netting a lot of the buds were so heavy they fell over and exposed some areas I really want to get some light to... so 48 hours of light at 40% while I watch what should be a beautiful final fade as the plant eats up the last Nutes. If anything goes wrong I can abort take the photos and cut so will pay really close attention to how it is looking over the next 48 hours. Added 30 Gallons of PH only Water. Reduced Lighting to 40% removed program time off. 48 hours of light. 6/17/2023 Week 10- Day 5 of Flower (Day 135 overall) (Day 75 of Flower) I had someone tell me that a few growers had done as I did and Gone Armageddon on the plants. Filling it with PH only and said the plants did not respond well and they were taken out of the comp at the very end because they felt like the pictures just wouldn't come out right. Even though I did go Armageddon, The PPM is at 353PPM with the residue of what was left in the buckets after draining as well as what I am getting from the TAP so I think they are doing good but I am checking them every few hours to see how they seem to be doing and I think they are doing good still and are on track. I also started prepping the area for the pics tomorrow T-24 Hours until Chop 6/18/2023 Week 10- Day 6 of Flower (Day 136 overall) (Day 76 of Flower) (Harvest Day) What a day.. what a day.. what a day.. as I was setting up and trying to figure out how I was going to get my pics #3 stems started breaking, it fell over and other stems broke.. So no really stunning competition photo for her, she had such a nice purple fade.. #2 stayed up in the Tent so that is the one I had to go with to submit for the contest. I wet trimmed them as they went into the tent and they took up three rows hanging in tent. I also decided I wanted to try some so I put a little in the freeze dryer for a 48 hour smoke test.. I will weigh it and add that to my total weight for the plants when it is all done.

been a little slack on the old diaries but I’m here with the update some big improvements this week bud sites appearing, she’s stretched impressively to all in all I’m with the way my girls our growing 😁 happy growing guys 👊

Day 85 since seed touched soil. Trim jail !!! 2.40 cm of hanging buds !!! Happy Growing !!!

September 1st, 79 days post flip Clones; All 3 clones have been growing well. Humidity it starting to drop here which is good considering we are approaching later flower. I had some rot on some lower nugs on one of the plants and have since removed all of the bad bud. It’s worth noting that based on how these have grown I will likely lose some to rot and burn from the light. I’m not worried about this. The whole point of this grow is too ultimately pick a single Pheno as our female for future breeding. I only need a little bit of each to make this determination along with seeing how they grow. All 3 plants have started fattening up since their feeding last week. They also seemed to respond well to the 15 minute shorter days. Now for the specifics Clone #2: This one is doing the worse. This is somewhat funny because during veg I thought it looked the best. It has unfortunately been out competed for the light by number 3 and 4. It also has some bud rot on its lower buds which were not getting any light or air. All bud rot buses have since been removed. Currently thin one has the least amount of a smell with it smelling earthy and peppery. Clone #3: This one has been growing quite well. This was the one that was shut and than exploded during stretch. I do still like its bud structure. Tightest of them all so far. Plant also has a really nice lemony and floral scent to it. At the moment this one is my favorite and my current go too pick for when this is all said and done. Clone #4: This one is the hint one. If I removed all of its super cropping it has too be close to 7.5 feet tall. Smells like orange rinds with a mix of gas. Parents: All 4 parents are very happy to receive some fert and some extra soil. Will continue to give nothing but water until it’s time to select one of these. God Bless!

An interesting discovery was made with this plant’s pot, I observed how having a row lesser of drainage drastically effected how I water this lady. Her grow medium swamps up if I maintain a 1lt daily water schedule, which would result in drowning the roots, luckily my grow medium has sponges up when wet, allow the slow irrigation to take place to avoid root rot. Luckily it’s spring time and in Mzansi(South Africa) it is hot enough to push my greenhouse’ temperature higher than the outdoor temperature, to encourage some form of evaporation and humidity, next week I will add pictures of the thermometers, and you can see the drastic difference in temperature.