This week I transplanted my little Strawberry Banana girl to a Big Girl Bed-LOL. Seriously though, I transplanted her to a large garden bed as opposed to 5 gallon pots like I usually do. I wanted to give this plant all the room she need to grow her very best. I'm curious to see if having a larger grow area will produce a larger plant. I am thinking more room for the roots to expand. My plant did not grow very much in height but the width of the leaves did grow. Weather has been very nice here this week.

Sunday Feb. 14th The Plants are still alive and looking quite good Its hard to keep them happy in 10 g Soil They are watered twice a Day with Feedingsolution AND sPRAYED WITH fAST pLANTS SPRAY AS fOLIAR fEED I can see little Flowers i think next Update we can see it much better.

Great week in growth. I started to use side led light and turning table, as on video. Now plant has light from top and all sides. Size of some leaves is XXL. Plant is not very fast in maturing, but very strong in structure.

Really good week with this lady. She is putting on weight in all the right places. Sprayed with BT and neem oil last night. Gave her 1 feeding this week and 3 waterings. Gave her a little hair cut to allow more air flow. Getting close and super excited!! Happy growing!!

Day92 Buds get bigger Day96 Pistils turn amber Trichomes turn milky

.

On this week the aroma has started to get stronger, very beautiful flowers, amazing sour sweet smell very pungent, I just cannot wait to smoke this nuggets, I've removed some little flowers to gain a little more air flow and avoid any type of fungal infections that could appear in this stage, let's see how she keeps developing those buds, very interesting strain!! Don't forget to check the hard diesel pheno #1 that you can find in my page! ❤️💚💛

Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 Buds keep coming along and frosty, but not really bump for the moment just a bit on the end week. 💪 Not too much work, just removed some leaves. 💧 Give water each 2/3 day 1.5 l Water + Roots + Bloom 1.5 l Water + Roots + Ez plus 1.5 l Water + Roots + Bloom + Sugar Royal PH @6 RQS - Easy Bloom Booster Tabs 1 tabs/5 l RQS - Easy Grow Booster Tabs 1 tabs/5 l RQS - Easy Micronutrients Plus 1 tabs/5 l (1 watering each 10 days.) 💡Mars Hydro - FC 3000 50% 46 cm. Mars Hydro Fan kit Setting 6 Have a good week and see you next week 👋 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - Smart FC3000 300W Samsung LM301B LED Grow Light💡💡 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - 6 Inch Inline Fan And Carbon Filter Combo With Thermostat Controller 💨💨 https://www.mars-hydro.com/6-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller RQS - Titan F1🌲🌲 https://www.royalqueenseeds.com/f1-hybrid-cannabis-seeds/624-titan-f1.html

She is performing well... Ran into a few deficiencies as her leafs started thining.. Not to sure if it has to do with genetics but nothing that can't be adjusted.. Other than that...flowering stage is looking absolutely good.. Thanks for tuning in much love

Still losing leaves from the bottom. Humidity is high at around 65%. Buds are still developing very fast. Just at 21 days into flowering I’ve bumped the lights up to 100%.

This baby actually snuck up on me being the first of 4 plants on my patio to be ready for harvest using trichomes as my guide. It took me roughly 4 hours to take the entire plant down and wash it and get her ready for drying. A bit longer than I expected since there's a fair bit of space between the nodes and it was fairly easy to pluck fan leaves. Been very hot and dry lately... although we are expecting our first precipitation since spring on Monday so it's not a bad time to get some harvesting out of the way. It will be a few days before this stuff is dry enough to process further, but I plan to give the dry trimmer another go. After further processing we can add in some weights. September 19 > I'm surprised that it's taken this long for this baby to dry to this point - but it's been a weird week with two bouts of precipitation that we don't normally see. Slow is better - but I have a load of herb stacked up behind this. Fortunately... what we call indian summer conditions are about to prevail drying things out further. I'm surprised how tasty my initial tastes of this strain came in... normally I wouldn't even consider tasting something this young, but after initial tests I'm sure I'm a gonna like this stuff. I had to de-bud the C&C completely to make room for Northern Lights which needs to come down tomorrow... probably followed another half week by Amnesia #2, and then there is Purple Berry Kush bringing up the rear guard. Gonna be a busy next couple weeks. Started trimming on September 23 and finished the next day. Final bud weight comes in at 269 grams for one plant (9.5 ounces). The bud size is not tremendous but the yield was substantial and will keep me and my friends rolling in CBD until next summer. I would have to say this stuff did not dry as fast as I'm used to for herb that I've washed after harvest. Initial dry seems to be around 50%. Lower than I like but I was trying to dry the herb out for use with the Dry Trimmer... but I'd have to say the trimmer still isn't performing up to expectations. I used the maximum number of rotations/spins and really tried to beat the herb up but she won the fight. I still spent somewhere between 5-6 hours trimming by hand after that fight. I couldn't really wait any longer for the C&C to dry further because I have other trees coming in behind her and I need the space. The amount of shake/trim generated using the Trim Bag was about 65 grams - the amount from my hand trimming was 3x that easy. Off to wrestle with Northern Lights... Amnesia 7 comes down at dawn. Busy time of year... but what would you rather be doing...? ✊ 😬

😋 Buds gaining weight. 🔥 Stoped burn by potassium (K) but marks remained on the older leaves. ✂️ I'll make last defoliation in the injured leafs. ✌️🎃 Thank you for checking my cultivation.

We're now at week 10 and about a week or so left until I decide to chop this bush down and begin drying and curing. I haven't really been doing much this week besides trimming one or two leaves off, the week prior I have removed only 4 during the whole week and the plant in whole has still been developing rapidly. This is supposedly the last week from the breeders description that the plant should be mature enough but with the transplant in the beginning stunting it for a week has probably been enough reason why growth was unstable during the whole time, I sort of felt it as well when it started flowering at such a small size. I've learn my mistake have redeemed myself with the care i gave it after the stunting. The lower bud sites are still deep green as if they haven't received enough light and I tried to fix that by lowering the light but the taller colas were getting too close (at least 5-8" close) so I decided to leave it at around 10-13" away so I don't disrupt the growing environment too much. I don't want to open the tent too much too now that it stinks up my small room in seconds and sometimes creeps through the doors out to the other rooms and outside the house if my window is open so I'll be looking into the tent when i need to water, fix something with the irrigation system, fix the height of the light, or get ready to harvest. I don't think I will be defoliating anymore since all bud sites are exposed to an extent and I just overall don't want to bother her and watch her naturally do the rest. I will be giving it another week or so to catch up making it around 75-80 days in total. I will be flushing it by now since i've looked at the trichomes on the most and least developed to find that it's starting to amber already with about a quarter turning white so purging the nutes now will be essential towards the end, i'm pretty excited and hope you guys are too.

Germinating 3 Purple Kush Feminised seeds. filtered water in glass, also add 3/5 drops of hydrogen peroxide, stir water well before adding the seeds, and stir again after adding seeds to water. I will leave it for 24 hours The seed coat softens by soaking your seeds in a hydrogen peroxide solution, allowing the seeds to absorb more oxygen. This results in increased germination speed Hopefully all 3 seeds will germinate by tomorrow? Seeds popped today:-)transferred 3 Purple Kush seeds in to small pots 10/09/23 3 Purple Kush seeds, 1 seed in each small pot. Each Pot is Half filled with lite mix compost and Half filled with Vermiculite , watered planting medium before sowing seeds 2cm deep in planting medium. The seed will push through the vermiculite easley with very little effort, in effect increasing higher successful germination rate, the compost will offer the first tap root an immediate lite nutrient supply. Placed 3 pots on top of a Propagation heating mat for correct germination temperature, position in a shaded place, and keep out of direct sunlight. This may seem like a lot of effort? and it is, but it will be highly beneficial by increasing a higher germination rate and higher amount of seeds will germinate from using this method :-) especially if your seeds were expensive. 11/09/23 no sprouts above the vermiculite yet, i will check it again tomorrow. Today 2 Purple Kush Germinate and rise above the vermiculite 3 days after sowing. Purple Kush is going ok, it could be growing faster, unfortunately i can't upload new photos because there is a problem in the GD system, they are doing there best to fix this problem as soon as possible. GMO Cookies where started 16/09/23 filtered water in glass, also add 3/5 drops of hydrogen peroxide, stir water well before adding the seeds, and stir again after adding seeds to water. 3 seeds sprouted, but only 2 survived, it become to hot and one GMO Cookie sprout died. I have now started another strain (Party Monster) 19/09/23 filtered water in glass, also add 3/5 drops of hydrogen peroxide, stir water well before adding the seeds, and stir again after adding seeds to water. I will leave it for 24 hours, 5 seeds of Party Monster have sprouted and are under the same 100W LED grow light. GMO Cookies have all come up above the vermiculite and are now positioned under a 100W LED, there is a small clip on fan blowing and circulating the air. This is my second attempt to grow GMO Cookies from 3 feminised seeds, i messed up on the first 3 seeds, i put them under a 250 Watt LED and it fried them, my folt. Growing from germinating seeds is a very delicate situation, your environment temperature needs good control. 2 Party Monster seedlings are looking good, coming along well under the 100W LED light. 3 GMO Cookies are looking good also under the 100W LED light. Plus i have now started soaking in glass of water 03/10/23, 5 Strawberry Yields fem seeds aka Strawberry Fields. filtered water in glass, also add 3/5 drops of hydrogen peroxide, stir water well before adding the seeds, and stir again after adding seeds to water. I will leave it for 24 hours. The seed coat softens by soaking your seeds in a hydrogen peroxide solution, allowing the seeds to absorb more oxygen. This results in increased germination speed Hopefully all 5 seeds will germinate by tomorrow? The 3 GMO Cookies fem seedlings are coming along well, keeping them under the hood of a propagator, i have many mixed seedlings under the same hood, to keep seedlings protected from this relentless Spanish heat. 5 Strawberry Yields fem seeds have all sprouted and are above vermiculite, keeping them under the hood of a propagator, i have many mixed seedlings under the same hood, to keep seedlings protected from this relentless Spanish heat. Also positioned also under the 100W LED light, indoor temp 29 degrees humidity 65%, still to hot for seedlings to be directly under lights due to high temp in the room. 3 Strawberry Yields sprouts are doing well, gave 2 seedlings away, no space for all 5 plants, coming along well under the 100W LED light. 27 degrees humidity 55% good growing conditions Super Lemon Haze I began soaking 13 feminised seeds SLH since 27/10, after 24 hours soaking 11 seeds opened in filtered water in glass, also added 3/5 drops of hydrogen peroxide, stir water well before adding the seeds, and stir again after adding seeds to water. The seed coat softens by soaking your seeds in a hydrogen peroxide solution, allowing the seeds to absorb more oxygen. This results in increased germination speed! 1 Super Lemon Haze fem seed planted in a 2 ltr pot 28/10, this is the only plant i will keep for flowering. The Pot is Half filled with lite mix compost, and the rest of the pot is half filled to the top with Vermiculite , watered planting medium thoroughly soaking it before sowing seeds 2cm deep in vermiculite. The seed will push through the vermiculite easley with very little effort, in effect encouraging a higher successful germination rate, the compost will offer the first tap root an immediate lite nutrient supply. And i planted the 11 remaining popped SLH seeds in the brown round pot, this is just to see how many will rise above the vermiculite from the 13 SLH fems seeds soaked on 27/10. I will give these away to a friend. Both pots have been placed on a propagating heating mat for consistent and ideal germination temperature until all seeds have risen above the vermiculite. Once my 1 fem seed has germinated! i will cover the pot with a transparen plastic bag and place the pot 20cm below a 100W LED light. Super Lemon Haze feminised seeds Seeds sourced from Satdica Bulk Seeds Soaked seeds 27/10 planted up on 28/10, 12 out of 13 seeds have transformed in to 12 healthy little seedlings. 11 seedlings will be given away to a friend, and i will keep the one seedling you see already planted up in a black 2 ltr size pot. Now positioned under my 100W LED light, distance 15cm above seedlings. Light cycle 24 hours. Keeping them covered with propagating hood for a few days longer to allow seedlings to become better established before removing the hood. The vents on hood are fully open to allow seedling to slowly become accustomed to the outside vege room space. Gelato Cookies 3 Feminised seeds Satdica Bulk Seeds Popped 3 Gelato Cookies Feminised seeds today 06/11 filtered water or bottled water in a glass, also add 3/5 drops of hydrogen peroxide, stir water well before adding the seeds, and stir again after adding seeds to water. I will leave it for 24 hours The seed coat softens by soaking your seeds in a hydrogen peroxide solution, allowing the seeds to absorb more oxygen. After placing on propagating heating mat for 24 hours. This resulted in increased germination speed! and today i can see little white taproot tails protruding out from the seed husk 👌 3 Gelato Cookies seeds, 1 seed in each small pot. Each Pot is Half filled with lite mix compost and Half filled with Vermiculite , watered planting medium before sowing seeds 2cm deep in planting medium. Spoon your seeds into it's planting medium, do not touch with fingers, spoon it in with half spoon of water and a seed, place the seed in the center 2cm deep in the planting medium, water it in again very lightly to help the seed settle into a comfortable position before leaving it to rest covered on your heating mat. The seed will push through the vermiculite easley with very little effort, in effect increasing higher successful germination rate, the compost will offer the first tap root an immediate lite nutrient supply. Watered and fed them in with Plagron Terra Grow 5ml to a ltr of water, i may have added too much, perhaps 2/3ml to a ltr of water would have been enough? placed 3 pots on top of a Propagation heating mat for correct germination temperature, position in a shaded place, and keep out of direct sunlight. This may seem like a lot of effort? and it is, but it will be highly beneficial by increasing a higher germination rate and higher amount of seeds will germinate from using this method :) especially if your seeds were expensive. 3 Gelato Cookies have come through the vermiculite, 09/11 and now they are positioned under my 100W LED grow light. I didn't expect all 3 seeds to pop, because 1 seed looked like perhaps not viable, because i only keep the bad looking seeds for myself and keep the best seeds for customers. I am keeping them covered with transparent plastic bags for a few days to protect them in case it's to hot in the 24/7 grow room which is 24 degrees, this is probably an ok temp for them? but i'd rather not run the risk. Romulan Feminised seeds Germinating 3 Romulan Feminised seeds 26/11 filtered water in glass, also add 3/5 drops of hydrogen peroxide, stir water well before adding the seeds, and stir again after adding seeds to water. I will leave it for 24 hours The seed coat softens by soaking your seeds in a hydrogen peroxide solution, allowing the seeds to absorb more oxygen. This results in increased germination speed Hopefully all 3 seeds will germinate by tomorrow? 27/11

Week 1 of Veg, here we go! Watering with 1/2 Oz of water every other day. Day 10, Now watering with 1oz. The crystal widow is growing happily!

Ok just finnished a blunt of this a out an hour ago, and I do not smoke blunts lol But it seems only right too do a real smoked reveiw , So the fbt7 has been dry now for about 2 weeks and in a jar and today was the day too take the first bud too try so I rolled a fat one " fat one in photos lol , So for me the flavour just isn't there yet and am hoping that will come after a cure , So I smoked this all too my self and qiukly , Within a few minutes I went white as a ghost as was twitching the the corner hehehe, This is very strong bud and I would go as far as saying it's probably the strongest bud I've had in years , I am what I would describe as a joker smoker , as I turn my bud into oils and do not smoke it , But any serious cannabis smoker will absolutely love this strain , Well done fast buds and thank you :)