Gave her a heavy defoliation! She's growing very strong, and needed a little thinning out! The defoliation promotes the lower buds growth, by allowing more light penetration! The defoliation also ensures that airflow throughout the plant is strong!

This week I'm going to talk a little bit about the 2 gal pots I leave outdoors. Since they're going to be indoors now, I've assembled a fertilizer rack and the bottom compartment is perfect for a cage with all the plants I have. With a length of 1.5m, width 65cm and height of 1m, I will use 4 led bulbs 50w and 2 full spectrum LEDs 36w long 1.2m. 272w / ~ 1m2. 2/3:Plant the plants indoors and lst them. 4 led bulb 50w 5/3:Run off all the trees, as it was soaked with rain water when left outside. is still the old nutritional dose. 6/3: Today I received the led light I ordered. I perfect my design and let the tree in the cage out and lst. 9/3:I feel everything is perfect today, I reduce their lighting time to 12/12. I will cut off all the fan leaves from the stem of the 2gal pots and prune all the small branches of the 1gal pot. in this pruning I will trim them as much as possible. It's been 37 days since the seed and I think they're ready for flowering. I need to flower them urgently because in the next 2 months the weather can be as hot as 40 degrees, and I really have no way to reduce their temperature. I would probably have them flower for 7 to 8 weeks to retain maximum resin. a few days before high, I fliming an NL plant, I experimented with this technique and I feel that they have been very successful since the fliming plants have a much larger stump than other plants. I really like this technique, as it will save me the small space I currently have without having toppings. With just a few simple steps I have got a really big stump and still keep the biggest main bud of the tree. I hope each plant can give me 20-25 grams of dried marijuana.

Think these will be done by end of week 8 possibly, adding UV + IR for terpes and pushing for an earlier finish! 🍋

~ WEDDING CHEESECAKE FAST FLOWER by FastBuds ~ Well fam, here we go again with another epic strain from FastBuds Fast Flowering stable. After having such tremendous success growing their Gorilla Cookies Fast Flower outdoors last year, I've decided to run another of their fast flowering strains outdoors this year... Wedding Cheesecake Fast Flower! The best description of this awesome cultivar comes directly from my friends at FastBuds which is as follows: "A delight for the mind and body: Wedding Cheesecake FF (Fast-Flowering) is a delicious strain that offers XXL yields in a 7-8 weeks flowering cycle. This terpene powerhouse produces loads and loads of mouth-watering vanilla-creamy-cookie-scented terps with hints of citrus and cinnamon. In addition to its delicious aromas, this variety grows very well in both indoor and outdoor setups, yielding up to 650 g/m2 without extra maintenance, making it the ideal strain for beginners as it allows you to maximize yields while minimizing work. This super-fast feminized photoperiod version offers upbeat and energetic yet deeply relaxing effects that are perfect for consumers looking for a heavily focused, motivating, and creative high. It’s the ideal strain for those needing that extra energy boost to start a busy day on the right foot. Wedding Cheesecake FF boasts chunky, large-sized buds with a thick layer of silvery-white resin and bright orange hairs scattered all over: that just screams ‘quality’. The lime-green flowers sparkle with an array of hues ranging from dark to light green, to magenta and purple, and reek of a delicious aroma that’ll remind you of fresh store-bought cheesecake. This is an XXL hybrid that grows extremely tall in height, reaching up to 3m with one huge main cola and multiple long side branches that can withstand enormous yields of up to 650 g/m2 with ease. Wedding Cheesecake FF is extremely resilient to the elements and can be grown in almost every climate as long as you’ve got the space and basics covered, making her an excellent choice for those looking for large-scale harvests with a quick turnaround time without much effort." ________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ The Setup: This is going to be an outdoor grow, but I have started the Wedding Cheesecake FF indoors as our weather is still too cold to put her outside (nighttime temp's dipping regularly into the 30's℉). The plan is simple... let her grow inside under a 19/5 light schedule until the nighttime temperatures stay above the mid 40's℉, at which point she'll be moved outside and transplanted into the soil which I have already setup and inoculated with beneficial microbes, and then let the fun begin!🤪💚 ________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Updates: 7/12- Week Fifteen is here, the FastBuds Wedding Cheesecake Fast Flower has stretched tremendously, becoming a monster at approximetly 6' tall now and should be starting to flower anytime!😍 7/14- Our summer weather continues to be hot, although we do get a break from the heat when we're lucky enough to get some rain which also helps mitigate the daily watering. Yesterday it rained the better part of the day, which provided over an inch of rain. Today, I went ahead and watered in the afternoon, but only gave the Wedding Cheesecake Fast Flower approx. 5g of well water from the garden hose. 7/16- Our weather continues to be really hot with daytime temp's in the upper 90's Fahrenheit. If it does not rain I am watering everyday with 10g of well water. I will also be top dressing the Wedding Cheesecake Fast Flower next week in anticipation of her transitioning into flower! 7/18- Another week gone by and more tremendous growth from the FastBuds Wedding Cheesecake Fast Flower which has me more excited about this strain than ever. I can't wait for flowering to begin and for this fine lady to show her stuff!🤩 Thank you for checking out my diary, your positive comments and support make it all worthwhile! 💚Growers Love!💚😎🙏

One more week and this is the last one before switching to 12/12h, I decided to clean a few more sheets and I'm sure it will recover very quickly.. Happy growing! ✌️🌱🌿🍁

I got these as clones. Using a cheap 600 watt led light from China paid like 50 bucks. Started with a few weeks of Buddha grow from aurora. I topped the sugar candy a week before Veg was done. I topped the peyote and topped it again on one side by accident which made the plant look like a U but missing half of the U. They grew about 3-4 feet tall. Very white looking hairs. Just started week 5. Used regular lite soil with aurora soul bloom. Also used fish shit and terpinator during flowering. Week 6 just bloom and terp I plan on lowering nutrients from here on as I start to plan the flushing in week 7

Look at her stalk!!

It’s finally getting a nice green colour This week I changed the scrog net , it’s about 7” above the top of the pots . upped the nutes to 1.8-2 ec. Sprayed with canna cure Watering every morning to about 10% run off Lollipoped an defoliated ,Waiting to fill the net a bit more but will be switching to 12/12 very soon.

The beautiful girl has started growing right now. I haven't fertilized her yet. I've done some topping and removed the small leaves, She's feeling great 💚

Week 6 has brought about the slowing of vertical growth and the flowers starting to put on some bulk. Each time I have run this cut the top leaves will start to come in lighter than the fan leaves below. At week 6, so far they are maintaining a lime green color with some discoloration. This is not a cause for concern. Flower formation is on track and everything else looks healthy. I basically have to ride with whatever happens because I use the BeanStalk line of products for fertilization. They are a single application, controlled release formula that feed the plant over the course of approximately 90 days. This means that I never have to mix nutes. Water only and I set it and forget it. I mix in a known quantity of the product at transplant and that’s it. I highly recommend this product to anyone who is interested in simplifying their grow. The upfront cost is a little steep, but I purchased 3 pound bags of all 4 products in February 2021 and still have a ton of it left. Last time I grew this cut, I observed many of the ‘sugar leaves’ turning yellow and dying prior to harvest. That plant was grown in a 5 gallon pot, with a much longer veg time, much more vegetative mass, and was much closer to my lights. I am hoping to get different results in a smaller pot with shorter veg time and less leaf growth. When I harvested that plant, I noticed that on most flowers this was not a big issue, but over time I have found that when sugar leaves die on the plant, this is the most likely avenue for mold to develop in my room.

The girls started to pre-flower on the 6th of June. They all have a slight smell when you rub the leaves. Kosher cake, Strawberry banana and the Forbidden runtz have a sweet smell to them. The Forbidden runtz reminds me of the smell of skywalker OG which is totally LUSH..!! The blackberry has more of an deep earthy smell with a slight bit of fruitiness. Super excited for the next few weeks with these ladies. Happy toking my peeps 😁

Smells and feels pretty perfect just like the first time✨✨✨✨

📅 Week 13 | Days 92–98 📅 🌼🌸🌺 Flowering Phase 🌼🌸🌺 Day 98 🌞 🔸 Poison Envy continues to develop beautifully. The buds have become noticeably denser compared to last week, with an impressive amount of resin forming. Trichomes are mostly milky now, with a few still clear - no amber ones yet. 🔸 The smell is evolving too: still that strong musty "forgotten laundry" funk, but now with a distinct sweet-spicy berry twist, almost like overripe blackberries. Very pungent! 🔸 Unfortunately, the humidity is still too high, but better than last week (currently 63%), which could become a problem. Today I finally turned on the dehumidifier and increased airflow using all clip fans at max setting. The dehumidifier now maintains a constant relative humidity of 50-60%, which I am very satisfied with. It does make it 2-3 degrees warmer in the tent, but I can live with that. 🔸Now give them 1-2 weeks of overdrive from AN and then only water. She drinks significantly less. 📈 Current Conditions 🌡️🔆 = 27°C 🌡️🌜 = 20°C 💨 VPD Target = 1.4 - 1.6 💨 Humidity = 63% → Target: below 60% 🔦 PPFD = 900 µmol (12/12) 🔦⌚ DLI = ~38 🛠️ Setup (unchanged) 💡 Lights: 2 x Sanlight Evo 4-120 @ 90% ⛺ Tent: 120 x 120 x 180 🍯 Pot Size: 18 liters 🌱 Medium: Bio-Bizz Light Mix 💊 Nutrients: Advanced Nutrients 💧 Water: Tap water (EC 0.5)

Grew this outdoor last year but the geno on this seed is definitely preferred. Kind of upset I gave the 1 clone I had away, but live and learn. Plus, I have some FIRE coming down the pipeline on these next few runs. But the structure on these is sick, the nugs are golf balls and dense.

In cure mode ..tried a bud couldn't wait ...I .can tell it will be good once properly cured..

Eternity Grow Cup - Week 9 Veg Update We are stepping into Week 9 of vegetation, and things are getting exciting! The plants are thriving—compact, bushy, and growing beautifully. This week, we introduced a SCROG (Screen of Green) net, an essential tool for maximizing yield and optimizing plant structure. Let’s dive deep into the why and how of scrogging: Why Install a SCROG Net Now? Maximizes Light Exposure: The net allows even light distribution across all branches, ensuring every bud site gets the optimal amount of light. Controls Plant Height: By guiding the branches through the net, we keep the canopy even and prevent excessive vertical growth. Enhances Airflow & Reduces Mold Risks: Spreading the plant out increases air circulation, reducing humidity pockets and minimizing risks of mold and pests. Increases Yield: More bud sites exposed to light mean higher-quality flowers and greater overall production. For now, we’re still not using the under-canopy lights, though they will come into play soon. The ICL 300 is positioned strategically, and we will likely move them around as needed later. For now, the focus is on structuring the plants and ensuring they fill out the available space properly. Optimizing Airflow - The Vortex Effect Air circulation is crucial for plant health, and this week, we’ve optimized airflow by positioning the fans to create a vortex effect: Fan Positioning: Each fan is placed at the tent corners, pointing in different directions, ensuring dynamic airflow instead of direct wind hitting the plants. Benefits of a Vortex System: Reduces hot spots and evenly distributes CO₂. Strengthens stems by creating a natural resistance. Prevents stagnant air, reducing mold and pest risks. The extraction system is powered by an AeroFan, connected to the AeroFan Smart Remote FRC1, currently running at 60% speed. This setup efficiently manages humidity and temperature while maintaining optimal air exchange. Current Environmental Conditions & Feeding For now, we’re maintaining the same water schedule and nutrient regimen. The environmental conditions remain stable: Temperature: Holding steady at ideal growth levels. Relative Humidity: Balanced to encourage healthy transpiration. PPFD (Photosynthetic Photon Flux Density): Kept at optimal levels to support vigorous vegetative growth. CO₂ Levels: Elevated but within safe limits, promoting faster growth. The plants are filling the space beautifully, but we know that the flip to flower is approaching soon! The next phase will depend on how fast they continue to spread, and adjustments will be made accordingly. Closing Thoughts & What’s Next? This week was all about structural optimization—ensuring proper airflow, training the plants with the SCROG net, and keeping everything in balance before the transition to flower. The upcoming weeks will be crucial, as we fine-tune the environment, possibly introduce the under-canopy lighting, and prepare for the flowering stage. A huge thank you to our sponsors Aptus Holland, TrolMaster, CannaKan, Grove Bags, Ziggi Papers, and of course, Zamnesia, Plagron, and Grow Diaries for making the Eternity Cup possible. And to our incredible community—followers, supporters, and even the critics—we appreciate every single one of you! Stay tuned for next week’s update, and don’t forget to follow along on YouTube and Instagram for exclusive content and behind-the-scenes looks! See you soon, and happy growing! Let’s keep pushing forward, and best of luck to all the competitors—we’re all growing something incredible together. Until next time! Genetics - Runtz https://www.zamnesia.com/6000-zamnesia-seeds-runtz-feminized.html Nutrients - Plagron https://plagron.com/en/hobby - Aptus Holland https://aptus-holland.com/ Controls - Trol Master https://www.trolmaster.eu/ LED - https://www.futureofgrow.com/en LED - https://www.thinkgrowled.com Soil - https://www.promixgardening.com/en Germination - Cannakan https://cannakan.com/?srsltid=AfmBOopXr-inLXajXu3QFgKXCXXos4F1oEvScjMKIB5MR5dk8-GJ-F49 DOGDOCTOR 15% off Smoking Papers - https://ziggioriginal.com/ Terpene saver - https://grovebags.com/ As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciloved and i fell honored with you all in my life With true love comes happiness Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. The journey with nature is one of discovery, creativity, and respect. Let’s celebrate it responsibly and continue to learn and grow together! Growers Love To you All 💚 #EternityGrowCup #RuntzHunt #GrowersLove #CannabisCommunity #AptusHolland #ProMixSoil #TrolMaster #Zamnesia #Plagron #ZiggiPapers #Grovebags

Looking good, tswitch her in flowering stage. Looking forward to seeing that flowers start growing.

This week I transplanted the clones of the first plants in flower.( 1 gallon container ) I also finished the final defoliation of the six bigger plants in veg before they get moved into a 11/13 light cycle (about 2 weeks). Pheno #2 at the moment is my favorite. All though it’s the smallest plant it has an amazing pheno that smells like blueberry gummy bears. The rest are showing strong cheese tones with hints of berries.