gonna water today. watering every 3rd day. working on the mainline continues

Yo creo que será esta la primera variedad en cortar, es pronto decirlo pero veo de sobras que es la cepa más avanzada en este proyecto. Finalizamos la cuarta semana de floración de estas red hot cookies , impresionante, que tonalidades que están tirando y que aromas. Sus olores me recuerdan al antiguo boomer de fresa 🍓. . Humedad por debajo de 50% temperatura maximas de 25/26 grados y seguimos controlando el ph en cada riego. . AgroBeta: 1 ml x L Flowering black line , vía radicular. 0,2 ml x L Beta shark, vía radicular. 0.5 gr x L mega PK , vía radicular. 0,8 ml x L Terminator, vía radicular. 0,5 gr x L Engordacogollos, vía radicular. 0,4 ml x L Tucán , vía radicular. 0,1 ml x L Betazyme, vía radicular. 0,3 ml x L Tricoma, vía radicular. 0,05 ml x L Gold Joker, vía radicular. 0,2 ml x L Silver, vía radicular. . Hasta aquí todo familia 🕸️ Espero que os esté gustando, un saludo y buenos humos fumetillas💨💨💨.

September 8 will be considered a day for the first time, Day 1 and I’m desire to call names Auto acid is “Tiwa” and Auto Kong 4 is “Ratree” 🍀🍀🍀🍀🍀🍀🍀🍀🍀🍀🍀🍀

Day 23 Flower yhea had to get the fabric out !!! burned and cut a few colas Today we did their last serious defoll Looking good and thriving Think them Bolting stage is over (I hope) Entering bulk stage I´ll be increasing my RH and decreasing VPD over the next few days for a period of 3 to 4 weeks (Bulk stage) I´ll be increasing potassium as well and no more tri-part Grow just tri-part Micros tri-part bloom and mono P mono K #Growerlove

Week 7 of flower in the books and we’ve had to adjust to the height issues in an attempt to salvage what we can of the largest mains on the cheese. Really should’ve done this 2 weeks ago and while it’d be preferable not to supercrop this late in flower - there really wasn’t a choice. It was done early in the week and the plant is none the worse for wear. On the whole, the nute burn issue has been rectified and while the damage isn’t massive, it’s still really obvious. For all the above reasons, We’re really not going to get that late flower look with this plant. Kinda sad there. Otherwise, the plants have begun to colour up and were quickly coming in to the harvest window. At this rate it looks like the gorilla cookies and cherry Bomb will go off first, with the cheese to follow and the lemon haze last. The GC is absolutely covered in trichs. We expect a great finish for this one. She’s unlike any pheno I’ve seen on here - ducksfooted with a pineapple shape to her heads but again, got it where it counts. The cherry Bomb is similar but also true to her description - huge cherry diesel scent coming off this plant. She’s chunky and sticky too so very pleased she’s made something of herself. The lemon haze is developing And rounding out slower. Trich production is moderate and I suspect she’s got a week longer than the rest. We’re getting there - maybe a week to 10 days. Almost time for jazz hands👍😎. Background/Repetitive Nonsense The strain line up on this grow is look’n quite saucy 😈. We’ve got 2 FB strains this time around - Gorilla Cookies (seems we always have some GSC cross in the works). Mainly because the colours look stellar and remind me of a sugar breathe we did last year that was 🔥. The other FB is their original Cheese strain... because we already smoked all our cheese... and we really like our cheese...😉. Emerald triangle was kind enough to include a freebie of Lemon Haze. Wasn’t really big on the list but we haven’t done a haze strain to write home about yet so worth a go👍. The last is a Cherry auto from Bomb seeds that we’ve been trying to get to for months. Let’s just hope that she’s not a dud like the last bean. The new digs for this run are courtesy MarsHydro👊. Their 2x4 single grow tent, paired with a shiny new 240w QB courtesy ViparSpectra. These folks were kind enough to discuss a collaboration and as a result, here we are to test out the gear with an inaugural run of autos. Each week, we’ll try to expand on some of the benefits of each, as well as any limiting factors or considerations that need attention when pondering purchase. Already I can say that both are high quality products in terms of overall craftsmanship. MarsHydro 2x4 Grow Tent: Excellent construction in terms of durability. Reinforced stitching on the zippers and corners ensures zero tearing. Conveniently placed screen vents and intake/exhaust ports. The ceiling exhaust port only exists on the right side. Perfect for me but not great if you’re running exhaust from the top on the left side (left side wall port makes up for this however). The aluminum frame is rigid enough to support the weight of the lights and accessories. Once you have some weight in the tent, she’s go’n nowhere and you can assemble and break it down in record time if moving or stashing the grow op. Only limiting factors I’ve noticed is that temp. Control will be an issue for a tent. It just doesn’t have the same insulating ability as a wood cabinet or other permanent enclosed space. No worries, this is offset by a small desktop heater and keeps the environment exactly where desired. The other issue was a production problem - the ceiling vent was accidentally stitched into the corner seams on the assembly line. Again, no real issue - just pulled it out with no damage or fraying to the tent or port👍. Website link here: https://www.mars-hydro.com/grow-tent/buy-mars-hydro-grow-tent-24x48x70-2-x-4-cabinet-closet-grow-box-upgraded-diamond-1680d-mylar-for-sale ViparSpectra 240w Quantum Board: This thing is sleek and slick in terms of design. Closest comparable to it that I’ve seen would be spiderfarmers line of qbs. They feature the same top-o-the-line components and roughly similar spectrums. Where VS takes the advantage is in the convenience of the dimmer nob which is easily accessible and works great at 50% with no strobing👍. The heat sink is also larger which contributes to lower temps. That’s not a good thing in my case but beneficial for most folks. I can already say that this will be a great fixture through all stages of growth. Where I know this light will excel will be in the veg. Stage for sure. Dimming function gives seedlings a much better chance of success with the ability to use lower lighting levels early on and the coverage area on a 240w is great. The average grower will find this panel suitable and fitting to their needs in a 2x4 grow space although I’d suggest 2 units if going any larger than that. The total output in this space equates to about 30w/sq.ft. Which is a decent amount of coverage based on power vs. Growprint. Ideal for veg. Certainly but, in flower - I tend to run closer to 50-60w/sq.ft to achieve higher yields. Again, similar fixtures have performed admirably in the past and while this wouldn’t be considered an “entry-level” fixture, I’d recommend that any grower new to the game not skimp on lighting and start with one of these. The price points are a great value for quality LED tech. These days, so there’s little reason to even consider a lesser fixture👍. I have no detail on limiting factors for this light as yet but have heard that stock branded fixtures don’t necessarily incorporate enough red diodes. I’ve seen no issue myself but confess - I’m no lighting guru. Website link: https://www.viparspectra.com/collections/xs-series/products/xs-series-xs2000 ***8% discount when using code: “ItBudWhisper”*** Happy to have you along for the ride if you made it this far through my opening rant!!😎🤟😎🤟😎

still flushing 2 less hours of light

What an absolute stonker. I cant believe how big she has got in just 2 weeks. So many colas and buds. The smell is so good and gettinng some nice colour. Still a long way to go, she is going to be a good one.

Alot of trial and error on this gal and shes fast to spring back, resilient to a lot-- hot res temps, training, etc. beautiful plant and genetics!

*Day 1-4 (Week 1) - Germination through tap root seed pop - Coco/Perlite - Lights running 18/6 - 5 Gallon AC Infinity fabric pot - Introducing Myco later this week * Day 5-7 (Week 1 ) - Seedling in Process - first set of true leaves have set - Light Myco topping

17.05. I don't have anything special to say, of course the weather is terrible... it's 6-7 at night, 15-16 during the day, so they're inside... the temperature inside is 20-21 during the day, at night from 15 to 17 when it's this cold... the plants were exactly 3 weeks old yesterday, today they entered the fourth week and most likely they will wait inside for the fifth week as well because the weather is terrible and there is no point in transplanting yet. Stay High!

Training still going well. Top is pretty even with some slower lower branches I may remove. Have a mite problem so I introduced 5 ladybugs that immediately went to work on the soil and leaves. Watering when dry but may end up transplanting into new soil if the bugs keep on bugging. Continued training a bit and decided to defoliate and take off some of the lower branches lacking growth. Continuing to water when dry while preparing to add more nutrients for flower production. Hoping she takes it well!

Great week for these plants. They are super healthy and moving along right through the early weeks of flower. 🌱 I've only been giving them water as I use organic compost as a meduim and they are very happy. 😎 The plant on the right is already very pungent.😵

Friday is Highday… One Week to go Here are some expressions of my Grow. Except the drying I think there’s nothing that could go wrong now. This Week I only pour water to the plant. The next days no more water for the lady’s so they absorb the last nutrients from the soil Nice Weekend 👌🏻 ElGrowLab🍀

Flowering nicely, starting to stack a little already. Did a 50% defoliation and removal today. going to remove some more popcorns and climate blockers tommorow. There are allot of tops. I have to train myself on training plants better to dial in how many cola tops i want and get them at the same height. Not a strong smell coming off but when you smeel the fingers , Ooohhh its so smooth ans sweet. This is looking like its going to be a big year for the tent. I am liking the Canna nutes. Delay after delay on dripper setup i am now puttin three more valves in for flushing off flush water reservoir, just waiting for parts and assembly. Home Assistant is fantastic at controlling entire setup! Lets roll with it.

This week, the pre-flowering began, slowly began to give fertilizers for flowering, I water every other time, first with fertilizers then with clean water, 2 liters, every 2 days, as the top layer of the earth dries.PH hold 6.5-6.3, PPM 643 last watering, 2 ml per liter. The plant drinks a lot .The week passed without problems, ahead of the long-awaited flowering.

Hey hoo let's go.