It’s been a while since last update and apologies , 3x dos si dos 33 in auto pots 1x dos si dos in all mix soil and hand watered 1x peyote critical auto pot 3x cookie dough sundae auto pot but the dos si dos 33’s are tanking along and proving very well , lovely Aromas so far , there’s a nice sharp sour lime flavour to it . Few weeks to go still and hoping they keep on flourishing as they are , this lot is from seeds so it also looks like a have couple of pheno’s of the strain . Buds are forming very well and growing big and dense. Peyote critical is stacking up nicely and doing well as always , sweet and earthy notes so far . Great structure to the buds also Cookie dough sundaes have been a challenge to deal with as I have very little info on this strain but after they seem slow to chunk up through mid flower they are finally making some gains and looking very sativa like with the shape of bud and going to need 10-11 weeks on this which I wasn’t quite wanting or expecting but it is what it is , but saying that the flavours from this is super sweet and tangy and really look forward to this new flavour to hit on .

October 6th! Got the Gorilla Zkittlez transplanted into a 3 gallon fabric pot. Now to do the Diesel Berry! See you guys next week!

The Blackberry moonrocks plants are beasts. They're so thick and sturdy, and they're covered in buds. They're not stretching much, so it's gonna be a really tight bud on top. I'm excited to see how they turn out. Well, it's Christmas again. This year feels a little different, though. Maybe it's the snow blanketing everything, or the way the tree lights up the whole living room. Either way, it's cozy and warm, even when it's freezing outside. I'm really looking forward to seeing what Santa brings. I hope I get that new video game I've been wanting. But most of all, I can't wait to spend time with my family. We always have so much fun This past week was a good one for the plants. They started the first week of their stretch, and they've already grown a decent amount. I can really see them filling out. It's cool to watch them grow so fast. I can't wait to see how big they get by the end I always get a little worried at this stage, like they're not gonna get as big as I want them to. But then I remember how they always end up surprising me. By the end, they're always perfect.

Now I give them only water for 12 days.... Than harvest.....

Durante esta semana hemos notado un buen crecimiento en la SS Y un enraizamiento correcto en las pequeñas. Quiero destacar que esta semana hemos empezado con el plan de nutrición con deeper Underground y micro vita de Top Crop. Quiero recordar a todos los amigos que estoy utilizando un sustrato tipo All Mix Y que durante esta semana voy a ir haciendo pruebas con las Servet a ver qué tal le sienta el producto Top Veg para crecimiento, solo va a ser una prueba con dosis muy pequeñas para que vaya acostumbrando. También quiero destacar que estoy muy contento con la evolución de la raíces de las Servet porque ya están en el fondo de la maceta

Let’s go Day 85 from seed !! This has been another great week ,ladies are coming close to the finish line an looking so beautiful!! This week we will continue flushing on these 3 ladies an jump em into there 48 hrs of darkness on Friday or Saturday will see ! Let’s have another great week ,, peace love an positive vibes to all y’all Keep them eyes peeled for next weeks update !! Cheers 😶‍🌫️💨💨💨💨💨🤙🏻

Organization was the word for the week. I organized the leaves on Daphni by cutting some old fan leaves and low level leaves. I organized my CO2 injection procedure. CO2 tank to REGULATOR thru SOLENOID connected to TIMER every two hours with lights on. I also organized the power strip in the back with cable ties and sleeves. Finally I had to organize my way out of a FUBAR situation when the oxigenating device in the RainForest 66 Reservoir stopped working. I will have some words to say to Katie in customer service for sure. I got a standard oxiginator and a disk shaped air stone and use that now to keep the water healthy. Daphni is staring to bud more on the lower nodes and the progress so far looks good. Knock on wood. Since i turn the exhaust fan off when CO2 is injected i dont really need the heater so I took it out. Have a great week.

Hello everyone, people! This is the largest Autoflowering plant that I have ever grown!)) The photo still does not convey the entire volume and its size .. it is just gigantic! fills a 1 square meter grow tent .. flowering started well! and develops without any problems .. received the first doses today Nirvana and Big Bud from advanced nutrients!!

I started LST and some ScrOG, a little late but everything looks fine. very very dense plant

03/05/2021 Beginning of week 4 looking good, I think she will start flowering in week 5-6, so I might top her, she is growing fast so I hope it will not harm flowering time. Ps. I did top And 24 hours later I can see all is well, where I topped her is healing, and side branches responding! I know she will be ready for flowering. Check out video and see.

well growth has exploded since the application of the soil activator last week. Also concentrated fish shit from my fish tank system was also applied liberally. Looks like they will be ready about 2 weeks early thanks to fast growth, great lights and the Gas Lantern lighting technique.

✋Wk 7: Will the size difference begin to fall in line with the predictions, and rearranging the wind. 👉 This week is Day 48 thru Day 54 total. (Feb 16 thru 22). Today (day 54ttl) the 1 gallon plant is at day 21 flower and the 3 gallon is at day 9 flower. 👉 This week has shown some interesting things. The 1 gallon plant is still ahead in the physical timeline, and has also started to demonstrate how the smaller pot is limiting its size. The 1 gallon has been ahead of the 3 gallon plant in size and stature, until this week. The 1 gallon has stopped stretching and is beginning to develop its flowers. I was worried it would continue to get bigger and may become an issue vertically as well as horizontally. The 3 gallon plant has grown a few inches and isn’t really stretching up yet, but it is growing overall in size. It’s a big dome of leaves right now. Its main cola is same height as a couple of the secondary branches. I doubt the main cola will remain the same but this plant hasn’t been typical from its germination so only time will tell. 👉 The other interesting thing has actually been trending this way for a couple of weeks…the run-off for both plants has been lower than the inflow and no low EC fertigation has been needed. The 1 gallons roots are undoubtedly densely packed in the pot. It takes several minutes to apply the nutrient solution. The volume needed has also increased. The 3 gallon still readily accepts the solution, but it takes more every day and the run off takes longer to start running out of the bottom. The saturation level of both pots has increased, and the 3 gallon especially. The EC for both has stayed below the inflow EC. This is unusual because part of the volume of water in the pot when saturated isn’t absorbed by the plant, it evaporates on all sides of the pot and the top of the media. This would leave the dried nutrients wich would rinse off at each fertigation adding to the TDS. The reduction of EC in the run-off means the nutrients are being utilized by the plant. I have dropped the inflow EC of the 3 gallon a little because I was worried about burn. I have kept the EC of the 1 gallon plant at the low end of the recommended EC range of the General Hydroponics drain to waste nutrient schedule chart for the Flora series of nutrients. I use the entire line of these nutrients. For the one gallon I had been giving it only the “simple program”, and the 3 gallon the “expert” (entire line). This week when I noted that the stretch has pretty much ended for the 1 gallon, and decided that I will go ahead and give it the expert mixture as well but given at the low end of the EC range still. Ive included the Fertigation log for the week. It shows the tent temps, the outdoor temps and HVAC setting. Also, I note when a fresh batch is made and what week on the schedule it is. Each pot has the recorded time of fertigation, volume, pH, and EC of the solution given and the corresponding run-off. I mix the solutions at full strength and use a solution with just silica and Cali-magic to reduce the EC to the desired EC. I mix that in at fertigation time. I also adjust the pH if necessary at this time. 👉 The structure of the 1 gallon is very stout main trunk, and each branch is very sturdy. The bigger fan leaf production has given way to smaller leaves. The structure of the 3 gallon also has a very stout main trunk and each branch is very sturdy. The 3 gallon has some very large fan leaves and it has lots of vegetation. Its very dense and hard to peer inside. For both plants I have begun to selectively remove branches that would not be producing anything but larf. The 1 gallon only needed the lowest main branches trimmed. I also removed some of its smaller shaded secondary branches and leaves inside the canopy. The trimming on the 3 gallon is similar, however its much harder to get inside. I just do a little at a time at each fertigation. Im not sure if the first set of branches on the 3 gallon will be tall enough to keep but I want to wait till the plant starts stretching to see what they will do. Ive left as many leaves as possible in the 3 gallon…a lot of really nice fat food factories. This plant may go very large, or it may stay somewhat stunted as it did during the early veg phase. 👉 I positioned the plants I closer to the back wall. I bought a oscillating tower fan and was hoping it would be a good addition to the tent. Alas, it had too strong of a wind current (on the lowest speed) and the 1 gallon was showing signs of wind stress after 2 days. So I removed the fan and re-positioned the smaller fans I had clipped up top of the tent. Both fans are now hanging lower on adjustable ropes and point toward the plants. They are working well like this and the air flow is good. I may modify the oscillating fan and install a variable resistor to the fan motor to reduce the flow. I have added the branch support to the legs of the stand the 1 gallon is on. These posts will be used to support the weight of buds or position them as needed. I will add the support posts to the 3 gallon plant after it has gone thru its stretch, maybe another 2 weeks for that.

5/25: It rained again today for most of the day, but I managed to get back out there and take some photos after it let up. I also shot a short video early in the a.m while it was sprinkling and the lights were on... I heard that this strain flowers really fast, but I really don't think she can finish before June 21 (the summer solstice). The other two seedlings (FFT#6 and FFT#7) are in the same boat. The 5 clones outdoors might be able to finish before they get the signal to reveg. I may end up bringing as many of them as I can fit into my closet to finish and starting another batch of beans to grow outdoors this summer... 5/26 - 5/31: I did some training on her early in the week between rain showers, and foliar fed with Microlife maximum bloom formula. She's more than 36" across now... She was looking a little N deficient, so I assume the dry amendments have petered out. I top-fed her with another couple tablespoons of cavern culture and on the 31st, they were dry enough to feed them. I gave them big bloom, tiger bloom, grow big, beastie bloomz, silica, endoboost, signal, humic acid, liquid kelp/fish emulsion, and liquid molasses. It just feels so strange that I'll be harvesting outdoor photos in June!?! That's it for week 8-

Taking care and paying attention to the VPD where the leaf temp is 2 degrees or so cooler than room temp. I've noticed a real difference; they look happy and healthy. They are 31 days old from planting and am wonderring if I should turn them; ceilings are 8'. I'm wondering why the petioles and the internodes are reddish colour is this a deficiency? Watching plants for weird looking stuff. Feeding once a week and foliar spraying pro-silicate once a week. Using amounts listed on bottles or a little less. Only spraying within 20 minutes of lights going out. Using a sprayer that allows you to spray upside down and has a very fine mist . Also wondering if I should use a surfactant in the spray bottle and if so would sunflower lecithin work for cannabis? Just started using a light rail with 2 sf4000, I will be adding another light shortly. Fimmed the wedding cake twice. 2 weeks apart.. Only fimmed the others once. I think it's coming along ok, I' do alot of reading to try to make the girls their best. It sure is a learning curve! We're all trying to grow our own medicine. Happy, healthy growing and smoking!

Week 10 – Day 71 Flower Day 43 ⚠️ Mimosa Evo – Hermie Alert! Unfortunately, some bad news last week: I found a few bananas (nanners) on one of Mimosa Evo’s main colas – a couple were already open 😬 🔍 I immediately removed the affected buds and checked the entire plant thoroughly. So far, only that one cola was affected – nothing new has popped up yet ✅ If you spot anything suspicious in the pictures: feel free to shout! 😅 🤷‍♂️ Cause remains unclear – could be light stress, or maybe just genetics. Still around 2 weeks to go, so I’m keeping a close eye and hoping for the best. 🌿 Current status – Mimosa Evo She still looks stable and healthy overall 🌱 ✅ No new nanners found since the cleanup 🌼 Buds are developing, but noticeably less swollen compared to White Widow I suspect the hermie stress might have diverted energy away from flower production or impacted development.

Good 😍🔥🔥

16/01/2022 - Day 91 - First day of the 14th week. Small one being "eaten" by WPM [see snow video], not much I can do, RIP Big one still on the grind, confirmed that it's like she has been topped, there are two main stems but she did all by her self. She is suffering WPM, too, of course, but being a little bigger and stronger I'm removing as much as possible. Wish me good luck and let's hope in sunny mild days 🤞☀️ - DD