Volviendo con mis pequeñas, debido a que el clima está muy cambiante en exterior comenzaron su proceso de prefloracion de forma anticipada, ideal para mi dado que por espacio quería plantas intermedias, así que se encuentran en horario 12/12 y con estimulación de floración 1 vez por semana con riegos controlados

Love the nugs coming In. 12/9/23 - Update, the Royal Dwarf auto is very tint. She's only 1 foot tall and already has 25 bud sites! I'm very happy with the flowers coming in, no 🍌 nanners or hermie characteristics! She's 100% female, and fits her name "Itty-Bitty"

Week 1 Aiming for: Generative steering VPD 1.18 DLI=44 37-53luxx Day 3 Irrigation system did not produce runoff. I will hand water them all untill runoff. Dripper uses 4.224gl per day Plants are 14-18inch tall (4 minutes is a shot)2%= 220ml 4minutes to hit 220 8.64*110=950 4 events of 220=880 Early flower schedule (Generative 4 minute water) 6:30 220 P1 6:49 440 P1 7:09 660 P1 7:24 880 P1 7:43 1000 P1 03:00 1220 P3 36.8klux(40.8DLI)is minimum(940umol) 40klux (44.37DLI) is Perfect(1027umol) 53.2klux(59.18DLI) is maximum (1370umol) They say PPFD of at least 800-1100 (800-1100) micromoles/m2/s-1 for perfect optimal lighting without additional CO2. PPFD of at least 800-1500 (800-1500) micromoles/m2/s-1 for perfect optimal lighting WITH additional CO2 Day 6 Plants are good for LST Day 7 looking like we need to defoliate. 4 plants still look sick WAtering is going well

Week 1 Aiming for: Generative steering VPD 1.18 DLI=44 37-53luxx Day 3 Irrigation system did not produce runoff. I will hand water them all untill runoff. Dripper uses 4.224gl per day Plants are 14-18inch tall (4 minutes is a shot)2%= 220ml 4minutes to hit 220 8.64*110=950 4 events of 220=880 Early flower schedule (Generative 4 minute water) 6:30 220 P1 6:49 440 P1 7:09 660 P1 7:24 880 P1 7:43 1000 P1 03:00 1220 P3 36.8klux(40.8DLI)is minimum(940umol) 40klux (44.37DLI) is Perfect(1027umol) 53.2klux(59.18DLI) is maximum (1370umol) They say PPFD of at least 800-1100 (800-1100) micromoles/m2/s-1 for perfect optimal lighting without additional CO2. PPFD of at least 800-1500 (800-1500) micromoles/m2/s-1 for perfect optimal lighting WITH additional CO2 Day 6 Plants are good for LST Day 7 looking like we need to defoliate. 4 plants still look sick WAtering is going well

I have only water to this girl for few days and she loved it ! Little bit amino xtrem Metrop and she explode !

👽We are continuing. I will not rush to transfer to flowering, I want to try to make the maximum circle (if there is enough space in the box). 💪🏻 I continue to give power root, pure zym, sugar royal. I will water more often, every 2 days. 🦈I will give Fish force 1 times a week. 😤Oops, we had a pickle on the 38th day. I neglected to constantly measure the PPM level, and he gave me 1100. I spilled 400ppm (150 calmag + A + B) on the entire volume of the pot. And immediately after that I gave him 750, as usual, with all additives except fish.

12/12 day 1 : let’s see how this RS11 gonna be !! Day3 : +5cm stretch mode activated ! I’ll wait a bit and pinch it if she grows to much

Started training them out and did some super cropping on some taller sites to even them all out will do some more topping once they get taller.

Overall a great strain too grow as grows with ease and seemingly without issues even with minimal care. With care she can produce hefty buds, as kept mine small my flowers reflect but still produced great smelling powerfully buds 🌱 Cycle finished in time essentially with ease and I'd be happy too recomend this strain from fastbuds. I will update with more images and videos upon timing complete and give dry weight ect, these girls wont bring much but smell absolute treat. Atm I have tried 1 small nug but still not ready not long untill can trim up, great oils and taste just need a little cure up once finished. Tried uploading longer videos but again says error 👎 have now added few extra videos

Overall a great strain too grow as grows with ease and seemingly without issues even with minimal care. With care she can produce hefty buds, as kept mine small my flowers reflect but still produced great smelling powerfully buds 🌱 Cycle finished in time essentially with ease and I'd be happy too recomend this strain from fastbuds. I will update with more images and videos upon timing complete and give dry weight ect, these girls wont bring much but smell absolute treat. Atm I have tried 1 small nug but still not ready not long untill can trim up, great oils and taste just need a little cure up once finished. Tried uploading longer videos but again says error 👎 have now added few extra videos

Each of the ladies looks perfectly healthy. Which makes me very happy. However, I'm a little undecided about defoliation... but the question has already been asked. I'll get an answer right away.

Doing ok

Happy days;))))))

06/12/23 - Day 0 Here we go again!! After a successful run of 3 strains, I've decided to pop a 3 pack of MilkyWay F1 from RQS. 3 seeds are in a wet paper towel, inside a plastic sandwich bag, into a dark warm cupboard. Im hoping they all germinate!! LET'S GROW!!! 08/12/23 - Day 2 from seed All 3 seeds have cracked and tap roots have come out, so i've put them in the peat pots. I mixed coco coir and perlite at 70/30. I've also decided to add a teaspoon of DYNOMYCO’s Mycorrhizae in each little pot too. 10/12/23 - Day 4 2 out of 3 have sprouted, the 3rd isn't too far behind. 11/12/23 3 out of 3 are out and thriving!! we're well within schedule and we're off to a very good start!! 12/12/23 - Day 6 I've decided to move all 3 into their final pots today! I'm using Plagron AllMix in 12L pots with a nice big drip dish. Into the tent they go!!!

Hey all, its our 2nd week after casing drop. Facing some issues with Night temp, sometimes it could fall to +12C, thinking about how to improve it. Also concerned about slow growth because of that. Using just 1/3 of Plagron recommended dose. Modified a bit my tank, made some technical window. Also set up automatic irrigation, because wool started to dry up during the day Upd Sunday 10.12.2023, Decided to put Babys finally to Seramis. Washing ceramics is some kind of hell: -First, I decided to sift all the dust through a sieve, stood in a half-bent position with bags of Seramis for 30m (my back didnt like it), but there was a lot of dust. -then I decided to check the Ph and rinse thoroughly. Although the package says 5.5-5.7 Ph, after the first flush with a balanced solution at 5.5 Ph, there was 6.5 in the drainage. - I was concerned by the very muddy brick colour water, then got tired of mixing 5.5 in a bucket for flushing and decided to rinse it with tap water from shower and then balance it back to 5.5 Ph . As a result, I poured from the hose for another 30 minutes until the water became more or less transparent. -I also tested FloraFlex discs, they drip great and, although round, fit perfectly into my square grow bags. -Meanwhile, the Milwaukee Ph meter broke down, even the readings of the calibration buffer were changing from 4-6 Ph within one minute. In the end, I spent another 30min and half a bottle of buffer on this too. It’s good that i had yellow Chinese Ph meter, which even after 3 years of rest in the box showed accurate buffer readings. -Finally, the Ph of the drainage was 5.5-5.7 and it was transparent, so I began to move it into the growbox. I sprinkled it as much as I could, it was impossible to dig deeper. The plants do not yet reach the matrix disk, so for now they will grow with the usual felt. -The cap of the tank is very thin and cannot withstand the weight of 2 grow bags, I’ll have to come up with something else, maybe I’ll put some kind of drainage grid. Watering will be from a tank with a mixed solution of 5.8 Ph and 1.1 EC.

Dia 21 de floracion, las plantas cada vez van desprendiendo un olorcito mas intenso, hojas como lechugas. Simplemente espectacular.

started flushing on sunday,then flushed again on tuesday. this is coming togather nicely. huge buds on the small plant. Lots of buds on the biger plant. it can no longer stand on its own and must be tied up. I am gonna chop on sunday!!

Started them in a glass of water then transferred to soil.

I got a smart plug for my humidifier and modded the button with an Arduino so that it turns on automatically when powered. Now I have events in my home Assistant on raspberry pi which will keep the VPD within a specified range. Every since then, the plants have been SO much happier and I have piece of mind now. I'm hoping these plants can pull through the stress, but I planted 4 more bag seeds just in case, they will sprout soon. I did some LST because why not. Accidentally broke a stem but I squeezed it together so now I have to pray.