Likes
Comments
Share
@A_Beefy
Follow
This lady has been receiving nutes unlike my other ladies. Did some minor defoliation and normal feeding schedule lessons learned on this one are to top off my autos well at least this genetics and to start these ladies with nutes to maximize growth. I do see pistols starting to sprout but no frosty leaves yet.
Processing
Likes
7
Share
@x_grower
Follow
Very fast seedling process, seeds stayed soaking for 24h and in the water they were already showing the first white root hair, another 48h in the paper towel and the day I potted them up they showed cotyledons. They took around 11 days to reach third node and complete germination but honestly I belive it could be faster if in better enviroment, mainly the humidity which was low and I transplanted them a day late. From day 5 I started feeding them exact same nutrients and ratio from the first vegetative week but starting at 0.4EC and increasing by 0.1EC/day until 1.1EC
Likes
9
Share
This plants have developed beautiful branches that will develop awesome fat nuggets for sure! Really nice strain to grow, would be awesome to apply lst some time on this strain, I have applied a selective defoliation on them, let's see how this ladies keep developing, I start to count the days of flower on April 10th!
Likes
7
Share
Week 6 for Lemon OG by SSSC, Lemon OG...my runtz of this year😂 Just seem to be a struggle train with this girl, really slow growth never seems happy but i will not give up on her😂 She was topped again half way through last week. Really hoping when shes a little older & her roots are striving that she will start pulling her own in the garden.
Likes
9
Share
@TMGrow
Follow
Beans Planted directly into OFHF watered with 1 shot glass - PH 6.0 11.02 - Tennessee PeYeti #3 sprouted! 11.03 - Tennessee PeYeti #1 sprouted! 11.04 - Tennessee PeYeti #2 sprouted! Head Savior #1 & #2 sprouted! 11.05 - Head Savior #3 sprouted! all 6 beans germinated 100% germination!!!
Likes
4
Share
@lotero
Follow
ya he empezado a regar con fertilizantes 1mL biogrow y 10ml enraizante por cada litro de agua he regado con 300ml por planta lo mejor de esta semana ha sido la tormenta de arena del Sáhara, me ha dejado mucho sol para mis plantas casi sin avances en tamaño esta semana por la poca luz, a ver si la q viene despeja
Likes
23
Share
Gracias al equipo de Kannabia, Marshydro, XpertNutrients y Trolmaster sin ellos esto no sería posible. 💐🍁 RS11: Las variedades de marihuana son cada vez más grandes y mejores, y la Rainbow Sherbet #11 de Kannabia ha llegado para revolucionar tu mundo con su extraordinario contenido de THC del 30% y sus terpenos increíblemente deliciosos. Con una genética 70% índica, esta descendiente de la Pink Guava y la Sunset Sherbet ofrece muchas características interesantes, como su espectacular belleza. Sus cogollos a veces adquieren una tonalidad azul y brillan con una gruesa capa de tricomas, por lo que parecen piedras preciosas cannábicas. Germina las semillas en exterior o interior, y prepárate para quedarte con la boca abierta. La Rainbow Sherbet #11 no necesita muchos cuidados para producir plantas robustas y vigorosas. Incluso los principiantes podrán conseguir un buen botín cuando llegue el momento de la cosecha, y los cultivadores que ya tienen experiencia no tendrán problemas para hacer que sus plantas rindan al máximo. Con un poco de LST podrás maximizar su producción, y tras 9 semanas de floración en interior conseguirás alrededor de 450-500g/m². Al aire libre, esta variedad puede generar hasta 500-600g por planta. El nombre de esta variedad augura un montón de sabor, y la Rainbow Sherbet #11 cumple con creces. Sus cogollos tienen un aroma extremadamente complejo que convierte cada fumada en un viaje aromático. Las fragancias que más destacan son las afrutadas (principalmente a cerezas y bayas), así como las cítricas. Esta mezcla va acompañada de unos matices terrosos y especiados y de un toque de pino. Tras unas cuantas caladas, los efectos de la Rainbow Sherbet #11 aparecen con toda su fuerza, potenciando la alegría y la creatividad, calmando el cuerpo y la mente, y ayudándote a olvidar las penurias del día. 💡TS-3000 + TS-1000: se usaran dos de las lámparas de la serie TS de Marshydro, para cubrir todas las necesidades de las plantas durante el ciclo de cultivo, uso las dos lámparas en floracion para llegar a toda la carpa de 1.50 x 1.50 x 1.80. https://marshydro.eu/products/mars-hydro-ts-3000-led-grow-light/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 💻 Trolmaster Tent-X TCS-1 como controlador de luz, optimiza tu cultivo con la última tecnología del mercado, desde donde puedes controlar todos los parametros. https://www.trolmaster.com/Products/Details/TCS-1 📆 Semana 3: Muy buena semana, he aplicado un riego solamente con agua de manantial para reducir la cantidad de sales acumuladas en el sustrato y ella se recupere del estrés que tiene. Se ha notado una mejoria . Creo que le quedan unas dos semanas por estirar, parece que va a ser una buena cosecha. Se mantiene un buen control del cuarto de cultivo gracias a @marshydro y @trolmaster. Mantengo las dosis de 1/3 de nutrientes recomendados por el fabricante. Potencia del foco 80%
Likes
11
Share
@BunnyBud
Follow
My First Autoflower Growing Indoor 🌸 Finally! I've decided to document my very first autoflower growing experience, starting from scratch with a 60×50×104 cm growbox. It's small, I know, but perfect for learning the ropes and figuring out how everything works. Reality Check: My First Tests During preliminary tests, I discovered something interesting and slightly concerning: starting from 26°C room temperature with the AC running, my growbox hits 28-29°C in about 2.5-3 hours. The maximum peak? A whopping 32°C with lights on and the box fully closed! For now, I've put a damp towel inside - sounds like a DIY hack, but it actually works to stabilize temperatures a bit and reduce those thermal swings. The Economics of It All Smart plugs let me monitor power consumption in real-time - currently running about €0.11/kWh. In a few weeks, I'll have to turn off the AC (my wallet will thank me!), so the first weeks will be characterized by high temperatures around 30-31°C. Fortunately, September and October should bring cooler conditions. My Germination Strategy During germination, I'll keep the lamp 60 cm from the seedlings - that's the maximum height I can manage in this box, but it should minimize light and heat stress on those emerging roots. Later, when the plants are stronger, I'll transfer them to the larger 60×60×180 cm growbox. Oh, almost forgot! A 350 ml/h ultrasonic humidifier is on its way, which should give me much more precise humidity control. My Current Setup The Growbox: 60×50×104 cm - perfect for two autoflowers in 6.5L pots using LST (Low Stress Training). Lighting: Spider Farmer SF-1000D suspended via pulley system near the ceiling, with about 4-5 cm clearance for heat dissipation. Ventilation: 130 m³/h extractor (4" diameter) that expels hot, humid air directly out the window - genius for preventing the room from becoming an oven! Plus a USB clip fan for internal air circulation. Climate: Ambient temperature stable around 26°C; inside the box 27-28°C without lights, jumping to 32°C when they're on. Substrate: BioBizz Light Mix combined with leftover perlite I had - exact quantity will depend on what's available, aiming for the right balance between aerated structure and water retention capacity. Nutrition: BioBizz Fish-Mix for vegetative growth, plus Grow and Bloom. pH maintained between 6.2-6.5. No CalMag for now. Monitoring: Two digital hygrometers connected to an app - one inside the growbox, one in the room. So I can check everything from my phone! Humidification: Two traditional humidifiers, plus the ultrasonic one coming for finer control. My Observations and The Plan The ventilation system works well - it manages to prevent heat and humidity from building up both in the box and the room. That's a win! The germination strategy is simple: lamp at 60 cm and hope for the best. The first weeks will be challenging with those high temperatures (30-31°C) when I turn off the AC, but then autumn should help me out. The plan is to grow the seedlings in the small box, then transfer them to the big one for flowering. Meanwhile, I'm monitoring everything: temperature, humidity, power consumption. The goal is to optimize the on/off cycles. Final Thoughts This first cycle is more of a technical experiment - I want to understand how to manage climate and lighting, stabilize temperature and humidity according to what the plants will ask for at each stage. The transfer to the larger box and winter approaching should improve conditions for optimal growth and flowering. I'll update this diary with all the quantitative data: yields, organoleptic characteristics, setup modifications. It'll be interesting to see how this first adventure turns out! Stay tuned for the next update! Ps: there is also a hole where the air enters passively, only it is hidden by the fan ❤️ 😅 ==UPDATE== BY INSERTING AN ULTRASONIC HUMIDIFIER I ACHIEVED THESE RESULTS, WHICH IS PERFECT 🌡️ Temperature: 23.3°C / 73.9°F 💧 Dew Point: 16.0°C / 60.8°F 💧 Relative Humidity: 63.6% ☁️ Absolute Humidity: 13.3 g/m³ 💨 Vapor Pressure: 18.2 mbar 🌱 VPD (Water Stress): 0.66 kPa 💨 Air Density: 0.012 kg/m³ ✅ Comfort Index: 100/100 🌿 Heat Stress: ✅ Optimal 🔋 Battery: 100% ⏰ Last update: 08/17/2025 12:49:35 I created a Python script that, starting with just 2–3 parameters measured by my Govee H5075 hygrometer, uses real scientific formulas to calculate all the other environmental values. This way, I can monitor my grow box much more effectively! I knew AI and programming skills would come in handy for this too lol ❤️🤣 ==UPDATE 22 AUGUST== Photoperiod: ➜ Emergence (day 0): 1 day without artificial light. ➜ Days 1–2: indirect natural light from the window. ➜ 17 August: first day under the lamp → 8 hours. ➜ 18 August: increased to 15 hours. ➜ From 19 August: stabilized at 16 hours of light per day, likely to remain this way due to practical reasons. Lamp distance: ➜ From 21 August: distance reduced from 60 cm to 50 cm → noticeable and more consistent growth. Plant status: ➜ Healthy plant with gradual growth. ➜ LST (Low Stress Training) will be applied in the next days to control height and shape. Watering & nutrients: ➜ Method: Med-Man. ➜ Water at 130 ppm, pH between 5.8–6.0. ➜ From 22 August: start of light foliar spraying (10 minutes before lights on) with pH 6.0, using a mixture of 3 parts water : 1 part Grow fertilizer. ➜ Purpose: slightly stimulate the plant during the early growth stage. Internal climate: ➜ Average temperature: 26–27 °C, with peaks up to 28–29 °C when the air conditioner is off. ➜ Humidity: kept stable using humidifier + damp cloth inside the box, which lowers temperature slightly and stabilizes the environment. Planned improvements: ➜ Purchase of: ➜ Dehumidifier for better humidity control. ➜ Wi-Fi hygrometer for more precise monitoring. ➜ Adjustable extractor fan, to better manage airflow and reduce nighttime noise.
Likes
24
Share
In week 6 the twelve AK-47 plants from SERIOUS SEEDS continue to THRIVE and in the meantime they have TOTALLY FILLED OUT the space in the HOMEBOX tent. Therefore on day 41 (=flowering day 13) its time to DEFOLIATE the plants and take off the biggest fan-leaves and lowest branches of each plant (see in video). In this second week of flowering they continue to get fed every watering with MILLS NUTRIENTS (following their feeding schedule from the MILLS website I changed from 1 ml START-R to 1 ml of C-4 now) and since they have a healthy dark-green color nothing further needs to be done. The SANlight LEDs are still dimmed to 60% (=one GREEN LIGHT on dimmer ON) and are appr. 70 cm above the top of the plants. The humidity inside the tent is dropping now, it went from 59% (due to bad weather outside and nothing I can change) to 41 % right now.
Likes
18
Share
Day 5 since time change to 12/12. Hey everyone ☺️. Finally the time has come :-) The lady moved into the flower tent on January 6th, 2021 😁. The day before, of course, a cutting was taken 👍. In the flowering tent, the distance between the plant and the lamp is 40 cm so that she can get used to the strength of the lamp. After 3-5 days I go down to 30 cm. This week it was watered twice with 1 l per plant. GHSC enhancers were added to one wash :-). Flower fertilizer will only be added in 12-16 days as soon as the first blossoms are there :-). Otherwise the tent was completely cleaned and the humidifier refilled. For the next few days I have filled fresh osmosis water in canisters again :-). Next week I will remove the bottom shoots so that the energy doesn't end up going into small popcorn buds 😉. There is nothing more to report this week and I wish you all a lot of fun with the update 😀. Stay healthy and let it grow 🙏🏻🍀 You can buy this Strain at : https://sweetseeds.es/de/red-mandarine-f1-fast-version/ Type: Red Mandarine F1 Fast Version ☝️🏼 Genetics: Red Poison Auto®️ (SWS39) X Tangie (California Orange x Hybrid Skunk) 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .
Processing
Likes
17
Share
Likes
28
Share
The buds are still growing and I have already discovered the first amber-coloured trichomes on Bruce Banner and S.A.D. #4. I think the harvest will be ready in 2-3 weeks. Until then, I will continue to observe the trichomes with the microscope.
Processing
Likes
58
Share
Alright and welcome to week 4, day 22. As you can see something is wrong. I think it's some Mag that is missing so I added some MagO 10 and I hope the problems will go away. If you guys think it is something different, leave a comment and we can discuss this 😎 I raised the water to 1.2 liters a day. I also wondered how this could happen. Everything is okay at the measurements so how does this occur? Day 23: The problems are still there but it seems they grew a bit overnight. I added Calcium today because some of you guys tell me it's Calcium deficiency. Well let's check back tomorrow. And wish me good luck! 😁 Day 24: Alright, I suck. I measured the runoff from plant 1 and it was way too high. Just like me sometimes (I forgot to take a picture of plant 4 today, have no clue how that shit happened. Yes I can count to 4 👽). What you guys thinking about EC 3.25 ph 5.9 @ the runoff? I don't think that's good so I lowered the EC in the tank by putting in fresh water. How did it come this far? Well, I probably did not give enough water. Meaning it was enough for the plants, yes, but there was no or not enough runoff. So the salts (fertilizer) came to EC 3.25 in the substrate. I'm "flushing" now with EC 1.25 and will check back tomorrow how the runoff will be. When I measured the runoff from all 4 plants together EC was 2.1 - which is only a little too high, I am trying to reach 1.6 - 1.8 . Let's check back tomorrow. For forgetting the picture of plant 4 today, I made a video. Day 25: The flushing was good. The plants look healthier again and the runoff is only 1.7 now. EC in the water tank is 1.35, ph 5.5. Also I removed some of the downer leafes. And I created this SCRoG net. So I just have to give them more water each day. So much there's about 20% runoff but I don't think I can measure or calculate 20% runoff. So I'll do it by feeling. Seems to work for now. Day 26: Looks like the plants are okay again. I only checked the ph and EC which were good. Day 27: The plants grow against the net. Also there are some waterdrops on the leafes which means that there is not enough air rotating inside the box. Have to check the airflow tomorrow. Day 28: Last day of vegetation. Just ph'ed down a bit.
Processing
Likes
8
Share
Week 3 for the smaller plants, week 4 for the 2 larger plants...I noticed new growth fairly quick after transplanting, they seem to be liking their new home :) I increased nutrients and started tying/LST
Likes
25
Share
***** Week 12 growth - February 20 to 26, 2021 - Week 3 Flower ***** These girls have been happy all week and CL2 has looked happiest still. CL1 pheno came out of the gate stronger and taller from the beginning but I have been looking for a little more out of her so while I was giving GSC x 707Headband some fulvic acid in her feed I gave some to CL1 also. She has reacted well to it, or it certainly hasn’t brought about anything negative. Used Gold Storm at 5ml/L👍 CL2 is just freaking gorgeous and may be a keeper, in early growth anyways😃 Love her size, node spacing, leaf to calix ratio, thick branching, early trichome production......all on point so far🔥When I took a leaf the other day the underside vein appeared to be slightly starting a color change......should be some purple in there somewhere with that genealogy😍 Light is at 20” and pulling 480 watts at the end of the week. Stated off with 400 watts at the start of the week but keep pushing it up this week. I don’t want to break 1,000 to 1,100 PAR by very much as I am not supplementing with true CO2. I have an Exhale bag to raise it a couple hundred ppm. Feel the need to keep the intensity high for penetration lower in the canopy. Will lower the amount of time in daylight if stress gets too high. Push to 11/13???? Nutrients are following IPP HOG 3 Part pretty closely. Just playing with macro nutrient ratios but otherwise supplements are at full week dosages following week 3. Have been seeing great resin production last runs so staying with Rezin as part of their feed schedule in flower. Terpinator......I think I see a lot of sulfer benefit here so it stays in the grows as well. Recharge seems to be working out well but we did the change mid grow from Microbial Mass. Since in coco have to feed the microbes so they reproduce and really dig Nature’s Candy with Remos additives in there👍 To help keep the root zone clean we add Enzymes😃 I have been debating a lot lately about the addition of CalMag to these nutrient lines and it’s necessity but since in coco I keep adding some......noticed a couple of spots on MM2 so have added it back in a bit more this week. Little more detail....... Feb 20/21 - Day 15 - Full feed today.....it’s been five days. - tap water with Silica @ 1.5ml, IPP line at full strength. - 1400ppm and 6.1pH - CL2 given 4L with good runoff. - CL1 was given some fulvic acid in Gold Storm. Help with giving her a chance to stretch a little more. Little more node spacing.....bushier girl. - 5ml/L added to feed for 1490ppm and 6.1pH. She was given 4L with good runoff. Feb 21/21 - Day16 - Dry out day Feb 22/21 - Day 17 - watering with supplements and light feed today. We are in mid flower now.....need to keep the macro nutrients up. - Epsom salts @ 1 Tbsp in 20L. Purple on stems is getting prominent......could be cold temps but also giving magnesium. - Terpinator @ 3ml, Rezin @ 1.5ml, Nature’s Candy @ 1ml, grow @ 1ml, micro @ 2ml, bloom @ 2.5ml, Recharge @ 1 Tbsp in 20L. - 1400ppm and 6.0pH. - 4L Feb 23/21 - Day 18 - keeping up the silica this watering - silica @ 1ml, CalMag @ 1ml, Ultimate B+ @ 1ml - 600ppm and 6.0pH - 3L Little to no runoff this watering. Feb 24/21 - Day 19 - full feed again today.....girls are big and growing hard......keep it going💪 - IPP line as listed for full line. - Terpinator @ 3ml, Rezin @ 1.5ml - 1425ppm and 6.0pH - they are taking the high ppm feeding well. Feb 25/21 - Day 20 - Had some feed water left from yesterday. Added plain tap water to get 20L. - 810ppm and 6.1pH - 1.5L......don’t want to over saturate the medium. Feb 26/21 - Day 21 - Nothing today. - Will feed early tomorrow as it’s Saturday. - Let the root zone get some oxygen is my thought and water to nice runoff first thing in morning. Week 3 behind us and going into 4.....middle of flower and girls are feeding hard. Pushing the lights hard now as well so need to keep the ppm up👍 Little more variety in these two phenos but certainly not negative differences. In the end I think CL1 might have bigger colas than CL2 because she is getting some wide/thick bud tops. I do like the appearance of 2 better though because I suspect trim is going to be better as well😎 Again though......I am make sure nothing happens to the clone of CL2 and Mandarin Mimosa 1 right now💪👊 Good week ETS.....let the swelling begin🌟
Likes
8
Share
@CZ420CZ
Follow
Merry Christmas everyone, im happy with this strain she grew well. Plant was 4weeks on 18/6, then 12/12, after harvested fotoperiod she was 14/10 and last day 24hrs, im happy with results buds smells very strongly of mandarines then grape tail- pretty fruity fresh. Cannot wait for dry buds! Happy growing gardeners 👍 17.1.2024/ Sorry fellow gardeners I need finally end this diary. I have lots of reasons of innactivitty, just LIFE IS A PAIN - PAIN IS A LIVE. My kidneys are not in the best shape. So I decided growing for 1 year. So SSH dry weight was 120g, AH 132g. main problem was space and i will fight with this again. Sorry for my late comeback. Life is unpredictable
Likes
35
Share
So only after two weeks of curing these buds are becoming more and more refined! The texture of the buds is beautiful, it crumbles and grinds up effortlessly in my space case and is light, fluffy and almost “goopy” coming out of the grinder. I guess goopy is my description of ground bud that sticks together as it comes out of the grinder. It almost resembles goo or putty! That’s always a great indicator of a strain that has lots of sticky dank trichomes 😎 Now onto the high... I must admit, I was a little disappointed at first. I was initially caught off guard by how smooth the smoke went down, but usually after the first hit I feel something. After the first hit of this strain I didn’t, so I packed another bowl and sparked her up... not much different. Around 15min after my second hit I started to gradually feel a trippy/tingly full body buzz and strong head buzz come on. Once I sat down on the couch it’s like it fully kicked in and I really felt a truly euphoric full body high along with a head high that felt incredible. She’s definitely what some would call a “creeper strain”! To me though, the high is reminiscent of the first hour after ingestion of some top quality cubensis! In a nutshell the high is euphoric, energetic and crisp. I don’t feel groggy at all when I smoke this strain, I can be extremely productive with work and still articulate my thoughts with ease. I also noticed that I don’t get anxious in public and even though this strain is extremely uplifting and energetic I have zero issues getting to sleep at night. I could truly classify this strain as medicinal and I know if I was still a caregiver this would be on constant rotation! I will update more after 2.5-3.0 months cure!
Likes
5
Share
This grow went so smooth it felt like it was really just on auto pilot. I’d give the girls daily look overs, but for the most part they did their own thing. 420fastbuds seeds are def legit and worth trying. 10/10- they got 48 hours of darkness, dried for 13 days in a dark room at 62 degrees and 60%rh, cured for a month in terplock bags and came out beyond top shelf.
Likes
55
Share
2018-07-17 Start of week 16 of veg. The girls is doing awesome and growing like crazy. I have topped them hard from the beginning and i will do a final topping this week. I will start flower as soon as i get my 4 x HLG 260W QUANTUM BOARD KIT V.2 that i have ordered.