I just did a solution change yesterday. I was having a issue getting the right amount dialed in. She has shifted into flowering, and is still making progress. She is under the Medic Grow Mini Sun-2 320 watt. I have her in Athena blended line nutrition she hopefully bounces back now fast, and makes some great progress. Thank you Medic Grow, Athena, and Fast Buds. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g If anyone needs to purchase fastbuds here is a link for my affiliate program https://myfastbuds.com/?a_aid=60910eaff2419

All good flipped to flower but giving the week grace period until seeing pistils. Be good

Nuggage

Heatwave made the EC go up, i feed a bit lower and more waterings per day

31-08-2019 Purple Kush started today after 12 weeks of low H5 light cycle is is good to get her into the new system Nutrition will be doubled on the next Nutrition Change out in 7 days. So far! All variables are under control. I like the fact I can turn the tap and check accurately and adjust if needed unlike soil unless you are using a soil kit all the time. 😎 Pump work 15 min intervals pumping Nutritional spray. 2 different Air flows 1) in solution with air stone and 2) open wand spray inside directed at the roots to provide additional oxygen.

💩Holy Crap We Are Back At It And Loving It💩 Growmies we are at DAY 21 and she's just killing💀it👌 So Shit , I gave them just a tad to much nutes 👈 But I have since fixed it So I'm starting to pull her over and do some low stress training 🙃 Lights being readjusted and chart updated .........👍rain water to be used entire growth👈 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14 NutriNPK Grow 28-14-14 NutriNPK Bloom 8-20-30 NutriNPK Bloom Booster 0-52-34 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈

Second time flushing it.. I’m also running out of time before harvest I should’ve been flushing it a week earlier.. she’ll be ready in 2 days for chop

Well, I've been comparing this with similar strains, untill now, i think she sugar kush is less profitable when using LST, but it works good, and the plant is nice and low

Helloo, planties are roughtly 3 week into vegetative growth. Into second week our cat snucked into the tent and being the motivated gardener she is, dug out quick one and speedy chille, we put them both back into place gave planties some water, and with time they recovered, speedy chille got most stress, but being photoperiod, recovered slowly aswell, still the shortest and very loved. :) so everythings good Royal kush has the strongest smell of them all, few leafs we defoliated we grind in our hard and smell a deep green canna scent. Northen lights is the leader in hight since begining When planties grew 5 tops we topped them, began doing LST and a bit of defoliation, bended stems away from the lamp and taking off leaf that blocks light reaching tops. The stems hardened and remind me now more of a tree

The phenotype named "Amnesia" was harvested at day 66. She was the smaller of the two, though she was frosty like no other. The phenotype named "Gold" is much larger in both plant and bud structure. She will go on for at least another week in hope of her frosting up some more. The buds are equally dense, but nonetheless there is quite the variation within this 5-pack of seeds. They seem more like cousins than sisters. But I am just a newbie, and this is my first grow, so take it with a grain of salt. Also: This week I started adding a few hours of UVB every day (just a 25w bulb for reptiles)

I'm impressed, once again! This is my third grow of Dinafem's Haze XXL. Two I journaled here on growdiaries. My experience has been that she is a highly resistant strain within the right grow environments, and offers a decent return on yields. Bud hits mind and body with a punch of energetic! No couch lock sedation. I like the racy feeling, in small doses. A little goes a long way. Thanks, Dinafem!

Day 42: Went on vacation for 3 weeks, asked a friend to take care of my plants and make pictures and videos. He gave them feedings, did some defoliation but it is hard from a distance to guide him how to train or to defoliate.

All the photos are in the 8x8 now just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

March 1, 2024 Day 15 Lots to do today. I added nutrients, changed the watering schedule, increased the light intensity, adjusted the light power level and readjusted the height. I've also changed the environment slightly. Starting with watering and nutrients. As I said last week, I changed the watering schedule from 250 ml daily to 500 ml pHed to 6.0 every other day. It's the same amount of water, but a different application. It should help keep the soil moist from top to bottom slowly. 2 more of these 500 ml waterings should put the containers to runoff and then I stop and install the bottom feed systems. Moving on to nutrients. I've started them in their regimen for the veg stage. 2 ml/ gallon of each of the Advanced Nutrients 3 part base solution plus 2 ml/gal Advanced Nutrients Sensi Cal/Mag Xtra. That will be added every other watering. And the Recharge will be added at the start of every week. Next is the lighting changes. Increased light power from 30% to 40% Light height is now 28" DLI: 22.7 mol/m²/d PAR: 350 ppfd This in turn brings me to the last change of the environment. The temp will stay roughly the same between 76° and 77° for the whole of the veg stage with the RH hovering between 60% and 62%. I'm also going to try to increase the night temp to 70° and turn off the humidifier to keep the RH at 60% during lights out. That's all for today. Grow System Environment: Temp: 73.3° RH: 60.3% VPD: 1.09 kPa March 2, 2024 Today I'm having a debate with myself. The containers aren't heavy enough for the plants ages. So I'm thinking maybe 250 ml one day and 500 ml the next. And so on until the containers are moist enough. So 250 ml today at some point. And because they are starting to show signs of nitrogen deficiency now, I think I'll have to keep the nutrients in for the rest of the week. Next week, when the pots are full, I'll then switch to feed every other watering. Lighting is looking spot on. They are reaching slightly and look perfect. Next week, I think I'll increase the light power up to 60%. There should be plenty of foliage to capture all the light. I'll also be starting training by the end of this week and into next week. Whenever they get tall enough to touch the side of the containers, is when I'll start training. I have air circulation, but not blowing directly on the plants yet. Hopefully that keeps the stalk malleable so I can comfortably be d them down as needed. I may also top them. I have discovered that a topped plant for me means a huge harvest. Every plant I have ever accidentally topped or mangled has provided wonderful yields. I had a Zkittlez that gave me 6.5 oz, a 6 oz Skywalker and the best so far, a Gorilla Cookies that yielded 21.5 oz! That being said, I feel like it's in my best interest to top them and go from there. However, I won't be topping right away. I find that the breaks happen during training when there's a good amount of branches. It's accidental, but still works wonders. We shall see how things go over the next 2 weeks. That should be it for veg, 2 more weeks. Finally, the nutrient regimen. Because the plants are suffering a small amount of nitrogen deficiency, I may increase the dose to 3 ml/gal instead of the 2 ml/gal. I'm also thinking about doubling the dose of Cal/Mag. The deficiency isn't bad, but I'm not 💯 certain what the deficiency is. Nitrogen or Cal/Mag. One of the three or maybe an iron issue. That should be fixed with the nutrients. Update: I decided to water in 250 ml after all. I didn't water at the base though. I feel that is crucial in not overwatering the young plants. When I water the 500 ml tomorrow, I'll water the base. It seems to be working. Also, I am wondering if I should do a foliar spray with the nutrients just to help speed up the nitrogen intake. I'll have to research if I should or not. Grow System Environment: Temp: 74.1° RH: 60.9% VPD: 1.10 kPa March 3, 2024 Both plants are now showing signs of nitrogen deficiency. I'm not surprised, but still, I need to fix it. So I increased the dose from 2 ml to 3 ml for the whole regimen except for the Recharge. That stayed the same. They got their 500 ml watering today as scheduled. The bases were also watered. Hopefully with the nitrogen coming in, they don't stunt. The soil moisture is about half way down the container. today's watering may bring it down to 75% of the container. I'll have to check later on after the soil has time to absorb. Technically it should drop in a few hours from the 43% it is now to about 35%. That's how I know the lower soil has absorbed the water. Tomorrow I'll do another 250 ml without watering at the base. This seems to be working quite well. I think I'll be good by the end of the week for watering. The basins will be installed next week I think. The plants should be big enough for the bottom feed system by then. Other than the nitrogen deficiency, they are beautiful and growing very nicely. I did notice that A is a tiny bit smaller than B and the leaves are a slightly different shape. Different phenome maybe? I'll find out. I had to raise the light up an inch as well. I'm trying to keep the DLI at 22.7 mol/m²/d for the next day or two. I will most likely increase the power to 50% tomorrow and mess with the distance. That way, when I transition to 60% next week and increase the DLI, it should go smoothly. The environment is spot on and has been for a couple of days now. Let's hope for less wonky weather for the next few weeks. The temp is hovering around 77° during the day and 70° during lights out. The RH is staying strong at 61% day and night. Very happy with that. I did increase it to 62% yesterday to keep the temp in check. Worked like a charm. Grow System Environment: Temp: 75.5° RH: 62.1% VPD: 1.11 kPa March 4, 2024 I have found my differences between the the plants. BPP A is slower to grow and has thinner leaves. I feel like this may be a sativa leaning phenome. It makes sense. Sativa's take longer and they have thinner leaves. But because this strain is a hybrid, the leaves aren't as thin. She only has one set of leaves and the first node hasn't opened up yet. Could be stunted or as I'm thinking, but it's still slower. Either way, I'm going to keep an eye on this one. If it's a stunt or a dwarf, I'm not keeping it. I'll toss it and make room for the other plants in the tent. BPP B is further along with fatter leaves and already on its second node. I can already see the branches popping out. So things are moving along nicely. However, I feel like she isn't growing as fast as she can and that's definitely my fault for not adding nitrogen a bit earlier than I did. She still has beautiful green leaves. And looks super healthy. Beautiful stalk. Nice and thick. They got their 250 ml watering today without watering the base. I guess I could just say that the 250 ml never gets watered on the base. Anyway, they still need more water. If the 500 ml doesn't do it tomorrow, I'll do another 500 ml the next day. And the day after as well. I really want a bit of runoff before I install the basins. Both plants are slightly leaning in toward the center of the light. That tells me I need to either rotate or raise the light and increase the power. But I think I'll have to increase the footprint so the outside of the plants get the light they need. Also, when the basins gets installed, the plants will spread out to their own quadrant. Frankly, I'd really like the bar style light from AC Infinity. The board style is too concentrated in the center. Anyway, I'll hold off on the installation for next week. I may rotate later today to get the plants to stand straight up. I may increase the Grow base for tomorrow's watering. I'd like to get more nitrogen in the plants earlier rather than later. Plus I'm pretty sure I won't be able to poison them with any toxicities. They are definitely low on everything. It should fix soon, but I need growth now. So I may do the additional grow base afterall. One thing I would happily like to mention is the environment. This is the first grow I've ever done that has had a super level environment. Very little variation from day and a from night. RH stays basically the same from day to night at around 61% and 62%. The day and night temps are also spot on. Day time temp is around 77° and 78° with night temp being around 69° and 70°. It's perfect. I increased the light intensity to 450 ppfd today. I increased the light power up to 50% and moved the light up a bit to compensate. As mentioned before, this should help fix the lean the plants have. I may also turn my supplemental lighting on and bring it to the top of the canopy. I might be able to decrease the power level on the main light and save some money on the electric bill. DLI: 27.2 mol/m²/d PAR: 420 ppfd (completely on purpose 🤣) Power: 50% That's all for now. A bit to do today Grow System Environment: Temp: 76.0° RH: 61.7% VPD: 1.15 kPa March 5, 2024 Both plants are looking really nice. However, I'm still a bit concerned with Banana PP A. She's still not opening her second set of leaves. On the other hand, Banana PP B is looking great. They are both getting close to the edge of their containers. Right on que. In 2 days, they should be big enough to install the basins. Hopefully the roots will be close to the bottom where the wicks can work their magic. I watered in 500 ml today. I decided that I needed to increase the nutrients as we are coming to the end of week 2. So now I have all nutrients at 4 ml/gal except the Recharge of course. I may increase that for next week. I'm not sure that I've caught up to the nitrogen issue. I had to move the light up a half inch today. Not much, but I'm keeping the PAR at 420 ppfd until next week. The environment is spot on for the week so far. 78° and 60.5% humidity for the day so far. As for last night, temp at 70.7° and 62.5% humidity. Grow System Environment: Temp: 76.1° RH: 61.9% VPD: 1.14 kPa March 6, 2024 Good day today. Saw some major movements today. Lots of growth overnight and beautiful looking plants. They each got 450 ml of water today. I watered at the base anyway as I need the soil to be moist ASAP. I didn't mess with the lighting today. I'll check tomorrow to see if it needs to be lifted. As always, the environment looks great. Nearly spot on. Today is a bit warmer out and the temp is around 78° in the tent. Nothing I can't fix in a snap. Grow System Environment: Temp: 75.9° RH: 61.7% VPD: 1.15 kPa March 21, 2024 Both ladies got their watering today. I increased the base grow nutrient to 8 ml for this watering. I also spaced out the waterings. I did 250 ml then waited an hour and added the other 250 ml. I also increased the Recharge to half a teaspoon from a quarter a teaspoon. Lighting is still fine. I'll be increasing the power and intensity tomorrow. So each plant is showing slight signs of nitrogen deficiency. It didn't get too far along, but still has a slight deficiency. The colors are nice and green still. I'd also like to note that Banana PPA is still a little bit behind. Not much, but still a bit. She's still the same height as the other one, so that's good. Environment is looks great as usual. No issues and definitely staying in my range. Tomorrow I'll be dropping the RH down to 58% but keeping the temp around 77° for the week. I'd also like to note that both plants have been rotating all on their own. It's intriguing how they are doing that. I'll have to start rotating in a couple weeks when they get bigger. Unless I have to run a net, then no rotation obviously. Still super interesting. Grow System Environment: Temp: 75.5° RH: 61.5% VPD: 1.13 kPa

Week 5 - Same nutes from previous week. 2 more weeks of vega i think. Look ate the shape of the plant and the wires to hold she down. I have toped my plants 2 times over the past 2 weeks, and now all of their have the "H" shape in the base

Le cime si sono ingrossate tanto, penso di raccogliere la prossima settimana, ho dovuto raccogliere un altra pianta Perché anche con lei i ragnetti rossi avevano iniziato a nutrirsi, la ho raccolta per evitare il propagarsi dell' infestazione Edit giorno 2, , dopo quasi una settimana di secca ( comunque troppo poco) ho deciso di mettere in barattolo la prima pianta che ho raccolto, vi lascio una foto per dovere di cronaca

Неделя очень медленно прошла, но с кустиком всё хорошо, правда запах сильно не выделяет, та и трихомы вот недавно только выкинула, скорее всего сроки у меня очень не совпадут с паспортом

Wow what a week this has been, the plants have all undergone fair dramatic changes. A real flurry of leaf yellowing, pistil darkening/curling, and bug swelling. The smell is really coming along now, I think we're really quite close to harvest. On the assumption that pre-flowering was two weeks, this strain should be ready at the end of week seven flowering, so in the case of this diary the end of week nine (i.e. one week to go!). Pistils are about 70-80% amber, and the lower pistils on buds have started curling inward. Trichomes look to me to be something like 10% clear 80% Milky 10% White. I have smoke tested a small bud off the lower part of plant 3 today after quick-drying overnight in the airing cupboard, taking into consideration the obvious chlorophyll from the fast dry, the high was much closer to what I am expecting than the last smoke test. It came on at the normal pace, was quite effective, and lasted a good while. I am really hoping I can navigate my way through the next process, as I feel quite close now to having some home grown bud for the first time. The plants are being well watered this evening with just water, and this will be the last time that I water them until harvest. I will continue to monitor these daily, I intend to harvest at the first sign of any amber trichome. Advice and comments welcomed. P.S. Exciting news! My order from Green House Seeds arrived today for my next diaries! :)