Raised light and reminded a few branches. Everything's going smooth.

Its a nice strain, smells good and its developing well.

3/4/2023 Week 3- Day 1 of Veg (Day 31 overall) Water Change out Day 36 Gallons in CalMag = .5Mil/Gal = 18Mil FloraMicro = 4.2Mil/Gal = 151Mil FloraGrow = 3.8Mil/Gal = 137Mil FloraBloom = 3.0Mil/Gal = 108Mil PH DOWN = 1.72Mil/Gal = 62Mil PPM = 546 PH = 5.88 This Grow has definitely been an interesting grow I have been playing with Over or Under since the beginning and it all started with me drowning the plants by adding too much water. I will have to make sure I watch that on all my future grows. I prayerful that this week will get me fully back on track, in my previous grows using my chart, I haven't had any issues during this week, so again prayerful that this is the week I am back on point. 3/5/2023 Week 3- Day 2 of Veg (Day 32 overall) ROOT ROT!!! I guess from when I drowned it I caused a lurking issue that really showed it's head today. The roots were looking not slightly bleached but looking black. I cut out what looked dead and I had to run to the local Hydro shop to pick up some items to see if I can fix it and strengthen the plants. I picked up Mammoth Silica, ORCA, and ROOT Drip. I completely drained the system and started it over today as well. 38 Gallons In Mammoth Silica = .5Mil/Gal = 19Mil CalMag= .5Mil/Gal = 19Mil Root Drip = 1Mil/Gal = 38Mil FloraMicro = 4.2Mil/Gal = 160Mil FloraGro = 3.8Mil/Gal = 144Mil FloraBloom = 3.0Mil/Gal = 114Mil Orca = .5Mil/Gal = 19Mil PH Down 60 Mil = PH 5.83 I also had to run by Staples I realized the paper I was using wasn't the right brightness and Lbs for the Photon App. What I needed to have 22Lbs 98 Bright. I recently saw a comparison of the different weight papers against a several hundred dollar Apage PPFD detector and with the right paper it was almost exact readings. With that my PPFD 355. 3/6/2023 Week 3- Day 3 of Veg (Day 33 overall) Still alive!! #2 and #3 are still alive and it looks like no further damage to any of the leaves. #2 needed 1 node topped. I will keep monitoring day to day. 3/7/2023 Week 3- Day 3 of Veg (Day 34 overall) Well Both appear to be doing all right. I cut off the offensive leaves from #3 nothing new on shown on the leaves. I actually needed to top 1 node on #2. PH is stable, Temps are stable.. I will be changing out the water and Nutes on Saturday not waiting the 2 weeks. 3/8/2023 Week 3- Day 4 of Veg (Day 35 overall) Well Both appear to be doing all right. I actually needed to top 1 node on #3 and 2 on #2. PH is stable, Temps are stable.. I will be changing out the water and Nutes on Saturday not waiting the 2 weeks. I think the additives are truly making a difference I think I will be adding them to all my grows from here on out. 3/9/2023 Week 3- Day 5 of Veg (Day 36 overall) Both still appear to be on the mend Still some dark brown on a small part of the roots and I don't know if those are just dead but it doesn't look like it is spreading and I see a bunch of new roots forming. Nothing new on the leaves at all. So I think the trio that I added is helping. The plants also seem to be in raised happy position going towards the light. I still plan to change the water on Saturday and go from there. 3/10/2023 Week 3- Day 6 of Veg (Day 37 overall) Moved the light up to 41 1/2" so 3' 4 1/2" away from the top of the Plants. PPFD= 363 Power on my Light =62.5 Water Temp is holding steady=70.3 PPM= 534 PH= 5.92 Tent Temp= 72.5 Humidity= 50-60% I have 2 humidifiers running on INK Bird controllers monitoring it 24/7. I will be changing out the water tomorrow even though I could let it go an extra week but I am still concerned that the Root Rot is clearing up and I don't want to risk it coming back. I want fresh Nutes/ water in the tanks. I topped 2 nodes on #3 I topped 3 Nodes on #2 I also cleaned out some of the bottom third portion that isn't getting much light and not much growth at all. #2: 8 1/2" tall, 18" Wide #3: 7 1/2" Tall, 15" Wide

Normal week

Wetter wird besser.... Schildläuse von Hand entfernt....

Will be Low stress training and topping in another week or so.

Week 3 Day 1: 8/16/25 Fed with nutrients : 8/15/25 Flushed with sledgehammer: 8/18/25 Fed with nutrients 8/20 or 8/21

Good day to all my friends and visitors here on GD. We harvested one of the Tropicana XL girls , this is going to be a weird entry because I decided to not make a harvest entry till the other one lady finishes. Unfortunately because of my sticky fingers from all the trimming I did not make many pictures/videos of the grow itsels, to fill this void I decided on including the harvest videos and photographs. Although the final weight will be summed up in the final harvest. We finally see that our problem with the plants may not a deficiency but overfeed...decided to leave the reservoir as it is for this week and add only fresh water next week we will flush the system and for seven days the girls will only drink water. -------------------------------------------------------------------------------------------------- The SE7000 runs at 520 Watt and about 33cm from the canopy and is doing an astounding job. For anyone who is interested in obtaining this efficient and affordable light fixture here's the link: https://spider-farmer.com/products/spider-farmer-upgraded-se7000-730w-commercial-led-grow-light/ A shout out to Sweet Seeds for the gift of this fenomenal genetics: https://sweetseeds.es/en/ Also I want to thank Jungle Indabox nutrients for supplying me with their excellent & affordable nutrients line: https://www.jungleindabox.cz/en That's it friends, I hope to see y'all next week, bless.

I finally decided to chop. This grow had gone way longer than I anticipated but due to high temperatures through summer months I allowed it to veg till outdoor temps would finally stabilize to mid 80F°. This plant was really stretched considering it was stunted early on and small for the first month or 2 the odds were against it but it overcame it's environment and bad user inputs in my part I will be growing this strain again in the future. Hopefully I my skills as a grower have improved by the time I attempt a second go. I really like the smell this plant gives Purple ish candy with a gassy undertone almost like a skunk or og smell that lingers. It's large flowers are beautifully covered in trichomes with brilliant hues of purple and green all over. I will try to fill in more of the blank weeks now that it's down but please bare with me 32/33 weeks is a long time. Thank you all for your interest and support.

It's been a busy week : 👉 I defoliated the plant by removing 8- 10 very big fan leaves, to allow more sunlight to reach the lower branches 👉 I took 2 cutting of my plant(s) 👉 I removed the six lowest branches and used the cuttings to make cuttings. 👉 I started the light deprivation technique by moving the plants to my darkroom to force flowering. 👉👉👉👉Every morning at 8:30 am I move the plants in the greenhouse. 👉👉👉👉Every evening at 8:30 pm I move the plants inside the darkroom. 👉 Once a week I give the plants a liquid booster with OPF 4:2:8 ; Fulvic 25 ; Yuccah ; Biovin liquid ; Earthworm compost extract. Big Thanks to Luc from Plant Health Solutions / Bioplantenvoeding dot nl 🙏🙏🙏👉 👉 We had an excellent week with high temperatures🌡️, lots of sun 🌞, and rain during the night 🌧️ Plant #1 ; height : 111 cm Plant #2 ; height : 88 cm Plant #3 ; height : 83 cm

En esta semana ya la poda apical quedo aplicada en ambas feminizadas y nuestra automática ya esta comenzando a sexar, por lo que dentro de un mes mas ya deberíamos tener lista o cosechada nuestra Gelato. Al final de la segunda semana de floración, agregaremos nuestra malla scrog y comenzaremos a distribuir nuestra ramos lo mas posible para obtener un mejor rendimiento de nuestra niñas y de ser posible, obtener al rededor de 6 o 10 puntas por planta.

For LIQUIDS & Nutes ******GREEN BUZZ NUTRIENTS***** organic. Also i’m using their LIVING SOIL CULTURE in powder form! MARSHYDRO ⛺️ has large openings on the sides which is useful for mid section groom room work. 🤩 ☀️ MARSHYDRO FC 3000 LED 300W 💨MARSHYDRO 6” in-line EXTRACTOR with speed-variation knob, comes complete with ducting and carbon filter.

She ready to harvest ...the focus is the other two now.. the same stain look very promising now she getting into flowering branches are turning a bit purple.....just have to watch the purple paralysis n see wat she becomes

Everything after germination has been pretty smooth. The plants in veg had a couple small brown spots due to under watering but no extreme signs or any abnormalities.

✂️🍯 Tical x Zamnesia — Nectar Drip | Drying & Trimming Report 🍯✂️ And… we are back again 😄 Yes — we are dividing the reports once more. At this point it is probably becoming part of the diary itself, but honestly, there is simply too much happening during these runs to compress everything into one giant update without losing important moments along the way. So thank you for the patience. And welcome back to the next chapter of our Nectar Drip journey: the drying, the trimming, the resin collecting, the temple balls, and the beginning of the cure. 🌱 Quick Recap For anyone arriving only now: This run was grown from seed under 12/12 lighting from the beginning. No long vegetative phase. No giant training sessions. No massive shaping. Just letting the genetics express themselves naturally while observing: - structure, - morphology, - resin production, - flower behavior, - and overall cultivar personality. Last week reflected the harvest itself: - trichome maturity, - fading colors, - hanging branches, - macro photography, - stem structure, - and final harvest observations. One of the smaller plants was frozen immediately after harvest for future washing and extraction work, which we will still cover in a dedicated future update once we complete the washing process properly. But this week? This week belongs to the dry flowers. And honestly… these girls became something beautiful. Drying Process The flowers dried for roughly 10 days under controlled conditions: - approximately 18–20°C - around 60% RH - with the first couple of days closer to 45% RH to help release initial surface moisture safely This part matters far more than many people realize. Drying is not simply: “waiting until the plant becomes dry.” It is controlled moisture migration. The outside of the flower always dries first. The inside stays wetter longer. And the goal is slowing that process down enough for: - chlorophyll breakdown, - smoother smoke, - terpene preservation, - proper moisture redistribution, - and stable curing afterward. Dry too fast? The outside crisps while the inside traps moisture. Dry too slowly? Risk increases: - mold, - anaerobic conditions, - terpene degradation, - unstable cure. These Nectar Drip girls dried beautifully. Dense flowers. Excellent structure. No rushed drying. No hay smell. No collapse. Just slow clean progression. And when the branches finally gave that satisfying “click” instead of bending… we knew it was time 😄 ✂️ Trimming Time So: gloves on, trim bin ready, studio lights running, music playing quietly in the background, Mr. Baggy supervising operations as always 😄 …and branch by branch, the process began. We trimmed entirely by hand using Zamnesia curved-point scissors. And honestly, these scissors became one of our favorite trimming tools. The pointed curved tip allows: - deeper precision, - cleaner access between calyxes, - easier sugar leaf removal, - less accidental flower damage, - and better control overall on dense compact flowers. Especially important on cultivars like this one. Because Nectar Drip became DENSE. Not airy. Not fluffy. Proper compact greasy flowers. The kind that fight back while trimming 😄 Every branch had to be broken down carefully: - separating buds individually, - removing excess leaf material, - preserving flower shape, - protecting trichome coverage, - and trying not to spend half the trimming session glued to the scissors. And yes… the resin production here was honestly ridiculous. 🖤 Resin Everywhere This cultivar is oily. Not just frosty visually. Oily physically. The gloves became coated quickly. The scissors accumulated thick dark resin constantly. The trim bin slowly filled with golden material underneath. And every few minutes we found ourselves scraping resin from: - gloves, - scissors, - fingers, - and tools. That sticky dark material eventually became beautiful little temple balls. And honestly? The way this resin behaved says a lot about the quality of the cultivar. Some resin stays dry and crumbly. This one softened almost instantly with minimal heat. Just body temperature alone was enough to: - soften, - bind, - darken, - and become workable. Extremely greasy resin. Extremely rich trichome expression. The little temple balls became: dark, soft, sticky, shiny, and incredibly aromatic. Beautiful medicine already before even curing properly. 🏆 Final Dry Numbers And now the final flower numbers for the dried plants: 🌱 337.3 grams dry flower Plus: the frozen material resting in the freezer for future washing and extraction work. And honestly? Very happy with these numbers. Especially considering: - the quality, - density, - resin production, - flower structure, - and the overall level of expression these girls delivered. This was not “big yield but average flower.” This was genuinely high-quality medicine. 📦 Storage & Beginning The Cure After trimming: the flowers were placed into glass jars for curing. The temple balls also rest curing slowly inside glass. And now another important phase begins: time. Because curing changes everything. Terpenes settle. Moisture equalizes. Harshness fades. Aromas deepen. Smoke smooths out. The cultivar slowly reveals its final personality. And honestly? This Nectar Drip already smells incredible. Sweet. Creamy. Fruity. Almonds.Dark. Warm. Slightly candy-like. With this deep resinous backend that keeps evolving every day. The room smelled unbelievable during trimming. At some moments it genuinely felt like opening: fruit candy, fuel, cream, and warm resin all at once. Very unique profile. Very memorable. 📸 Documentation & Studio Sessions Of course, we documented almost everything: - trimming time-lapses, - resin collection, - temple ball formation, - close-up flower shots, - drying branches, - sticky gloves, - macro details, - cinematic studio moments, - and behind-the-scenes chaos 😄 Because honestly… these moments matter too. A grow diary becomes more than just showing finished buds after enough weeks. It becomes documentation: - of process, - mistakes, - lessons, - atmosphere, - obsession, - patience, - and passion. And this run definitely carried all of that. ⏳ What Comes Next? Next update will probably become the final chapter: - curing review, - smoke report, - terpene evolution, - effect profile, - overall strain impressions, - and our honest final thoughts about this Tical x Zamnesia collaboration after living with the medicine properly. And honestly… we are extremely excited for that one. Because this cultivar already feels very special. 🙏 Final Thanks And as always… thank you. To Zamnesia. To Tical. To Plagron. To F.O.G. To Lumiflora. To the gear. To the platform. To the supporters. To the silent followers. To the OGs still here since day one. To the curious new visitors. To the people learning quietly in the background. To the skeptics. To the lovers. To the haters too 😄 And to everybody who stopped scrolling long enough to spend even a few moments here with us. That alone deserves gratitude. This collaboration genuinely feels special. And honestly… I still feel like Nectar Drip has one more beautiful chapter left before this journey fully ends. 📡 DELETED @ 1K Please stay tuned.we never quit https://www.youtube.com/@TheDogDoctorOfficial NEW 🙏 Thank you for your patience and continued support. FOR DISCOUNT CODES AND MORE JUST FOLLOW THE LINK https://website.beacons.ai/dogdoctorofficial 📲 Don’t forget to Subscribe and follow me on Instagram and YouTube @DogDoctorOfficial for exclusive content, real-time updates, and behind-the-scenes magic. We’ve got so much more coming, including transplanting and all the amazing techniques that go along with it. You won’t want to miss it. GrowDiaries Journal: https://growdiaries.com/grower/dogdoctorofficial Instagram: https://www.instagram.com/dogdoctorofficial/ YouTube: https://www.youtube.com/@dogdoctorofficial Deleted by Youtube - https://www.youtube.com/@TheDogDoctorOfficial NEW Vimeo : https://vimeo.com/dogdoctorofficial Under construction stay tuned ⸻ Explore the Gear that Powers My Grow If you’re curious about the tech I’m using, check out these links: 🔆 Lighting & Environmental Control • Future of Grow — Advanced LED lighting technology https://www.futureofgrow.com/ DISCOUNT CODE: DOG20 • Lumiflora — Under-canopy LED lighting https://lumiflorade.com/ • TrollMaster — Environmental controllers and automation gear (past collaboration) ⸻ Genetics • Zamnesia Seeds — Genetics used in this project https://www.zamnesia.com/ ⸻ 🌱 Soil, Substrates, Boosters & Root Support • Plagron — Substrates, bio mixes, and supportive products https://plagron.com/en/ ⸻ 🎒 Storage, Curing & Preservation • Grove Bags — Curing and storage solutions https://grovebags.com/ ⸻ 📸 Photography Equipment & Tools (Not sponsors, but part of my creative toolkit) • Sony A6700 • Sony full-frame macro lens + few more • Stacking photography workflow - learning • iPhone (for behind-the-scenes shots) We’ve got much more coming as we move through the grow cycles. Trust me, you won’t want to miss the next steps, let’s push the boundaries of indoor horticulture together! As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. Let’s celebrate it responsibly and continue to learn and grow together. With true love comes happiness. Always believe in yourself, and always do things expecting nothing and with an open heart. Be a giver, and the universe will give back in ways you could never imagine. 💚 Growers love to all 💚 📸 P.S. – The Eye Behind the Lens All photos in this diary (for now — except for the ones showing the camera, which I took with an iPhone) are taken with a Sony A6700 paired with a Sony full-frame macro lens and a few more. Photography is part of the story — it’s how we share the fine textures, the glow, and the quiet details that words can’t always capture. I’ve also started experimenting with photo stacking — a technique where multiple images, each taken at a slightly different focus point, are layered together to create one perfectly sharp image from front to back. It’s not digital enhancement or AI; it’s pure photography — a way to reveal the plant’s beauty in microscopic depth, from trichome to petal. You’ll even see a few shots of "ghost me" capturing the shots — camera, lens, setup — because every grow deserves not just to be cultivated, but documented like art. FOR DISCOUNT CODES AND MORE JUST FOLLOW THE LINK https://website.beacons.ai/dogdoctorofficial NEW DISCORD - Official Server Invite Link : https://discord.gg/ksjAkA5T74

So I had a few issue. I over watered early on, took them out the seed tray early, started feeding them a week or two late, no humidifier yet but they recovered well.

D-77 : Girls are going well and they are beautyful but, they are growing alot less than expected. They are 30cm behind they should be. I hope it is because of all the effort I made on the mainlining process at the beginning....

On day 1 I changed out my reservoir, and added my bloom nutes, adjusted my light schedule to 12/12 and defoliated the plants. I adjusted the reservoirs PH to 6.1 My hope is that by flipping this cultivar earlier than my last run, I will not run out of vertical space ;). On day 2 I adjusted my reservoirs PH down to 6.1. On day 3 the clawing is almost completely gone. I adjusted the reservoirs PH down to 6.1. On day 4 the reservoir's PH is at 6.1. I defoliated the plants removing anything blocking lower growth to increase light and air penetration of my mains. On day 5 the reservoirs PH is 6.1. On day 6 I adjusted the PH of the reservoir up from 6.0 to 6.3. I will let the PH drift between 6.1-6.3. on day 7 the reservoirs PH is 6.2. I lowered the light intensity from 100% to 85% to give the top of my plant canopy an average PPFD of 700-1000. I plan to reduce the intensity as the plants continue to stretch to keep them in the 800-1000 PPFD range. I just got my first quantum par sensor and I'm really loving the new data it gives me to optimize my lighting.