Likes
Comments
Share
🌿 **Green-O-Matic Grow Week 9 Update: Nearing Harvest Time!** 🌱 Greetings, fellow growers! It's time for an exciting update on the progress of our Green-O-Matic journey as we reach Week 9 of the grow cycle. With anticipation building and buds swelling, let's dive into the latest developments: 🌟 **Bountiful Bud Development**: At Week 9, our Green-O-Matic beauties are truly showing their potential, with buds swelling and resin production kicking into high gear. The once-small flowers have transformed into dense, frosty nuggets, promising a bountiful harvest in the near future. Trichome production is in full swing, indicating peak cannabinoid potency and aromatic complexity. 📏 **Final Stretch of Growth**: As we enter the final stretch of the flowering phase, our focus shifts to maximizing bud development while ensuring optimal ripening conditions. With careful attention to environmental factors such as temperature, humidity, and airflow, we aim to create the perfect microclimate for our plants to thrive and reach their full potential. 🍃 **Leaf Senescence and Nutrient Management**: As expected in the late flowering stage, some leaves may begin to exhibit signs of senescence as the plant reallocates energy towards bud production. This natural process is perfectly normal and serves as a signal that the plant is nearing maturity. Meanwhile, our nutrient management strategy remains vigilant, providing the essential elements needed to support robust flowering without risking nutrient imbalances or deficiencies. 🔍 **Monitoring Trichome Maturity**: With harvest on the horizon, we're keeping a close eye on trichome development to determine the optimal time for harvest. Using a jeweler's loupe or digital microscope, we inspect trichomes for signs of maturity, aiming for a mix of cloudy and amber trichomes to achieve the desired balance of THC and CBD levels, as well as flavor and aroma profiles. 🌞 **Preparing for Harvest**: As we prepare for harvest day, our checklist includes gathering supplies such as trimming shears, drying racks, and storage containers, as well as ensuring a clean and sanitized workspace to maintain the integrity of our precious buds. Proper post-harvest care and curing techniques will be employed to preserve terpene profiles and enhance overall quality. In conclusion, Week 9 marks a pivotal moment in our Green-O-Matic grow journey, where patience and precision culminate in the imminent harvest of our prized buds. Stay tuned for the next update as we celebrate the culmination of months of dedicated cultivation with a bounty of premium-grade cannabis ready to be enjoyed and shared. Happy growing! 🌿✨ 🚫 **Addendum: Phenotype Bin Update** 🌱 In the spirit of transparency and continuous improvement, it's important to note that we've made the decision to bin one out of the three phenotypes due to poor development. Despite our best efforts and meticulous care, this particular phenotype failed to thrive and did not meet our quality standards. While it's always disappointing to part ways with a plant, this decision ensures that our resources and attention remain focused on nurturing the strongest and healthiest phenotypes to their fullest potential. By removing underperforming individuals, we can redirect our efforts towards optimizing the remaining plants for a successful harvest. Rest assured, this adjustment will not deter us from our commitment to excellence. We remain dedicated to the cultivation process, learning from each experience, and striving for the highest standards of quality and consistency in our cannabis cultivation journey. Thank you for your understanding and continued support as we navigate the complexities of plant development and refinement. Together, we'll continue to grow and evolve towards greater success in our cultivation endeavors. 🌿💪
Likes
1
Share
@dzoseph
Follow
I continued the LST and defoliated a few fan leaves that obstructed light. i bound the other stems of the plant lower to keep it a bit more down since it was growing at a rapid rate.
Likes
10
Share
Likes
8
Share
Deep breaths... alright well things changed rapidly this week. She went downhill quick. Signs of potassium deficiency, but that shouldn’t be a problem. Thinking, after checking runoff, she faded a little too acidic (I had stopped checking regularly as I’ve had minimal issues on previous 5 grows). She got a nice flush, with final run off reading at 6.4. She only has 2 weeks or so to go, so not panicking; if anything just a learning experience. Her flush was yesterday; she’s scheduled for feeding on Tuesday, so we will see how things go. Video/photos taken 63 days after breaking soil.
Likes
32
Share
🍼Greenhouse Feeding BioGrow & BioBloom ⛺️MARSHYDRO The ⛺️ has a small door 🚪 on the sides which is useful for mid section groom room work. 🤩 ☀️ by VIPARSPECTRA (models: P2000 & XS 2000) 🌱 DUTCH HEADSHOP SEEDS: www.dutch-headshop.eu www.dutch-headshop.nl ONE STOP SHOP . 100% germination success on first try! with HUGE seed selection! . Very friendly customer service . Best bio-seed packaging . Sells other products @ best prices: . Nutrients . Vaporizers . Smoking accessories (grinders, cones) . CBD Tinctures . Resin Extracts . Boveda humidity packs . Ziplock bags . Other health supplements such as: . Lion’s Mane Organic Capsules . Hemp Seed coffee
Likes
1
Share
Likes
18
Share
Week 6 Report: White OG – Shaping Her Future 🌟 We’re at Week 6 of veg, and the White OG is thriving like a superstar! This week, I decided to take her structure to the next level by topping a few branches, and let me tell you—she’s loving it. 🌿 The growth is vigorous, and she’s shaping up beautifully to maximize her potential for flowering. Let’s dive into what went down this week and why it’s all so important for her journey. Branch Topping: Building a Strong Framework After recovering beautifully from her initial topping at node 7, it was time to refine her structure further by topping a few branches. For each branch, I left two nodes to ensure strong, healthy growth while encouraging a bushier canopy. Why Top Branches? Topping isn’t just for the main stem—it’s an essential technique for creating an even canopy and increasing yield potential: 1. Encourages Lateral Growth: By removing the top of a branch, the plant redirects its energy into the remaining nodes, encouraging side shoots to grow and fill out. 2. Maximizes Light Penetration: A bushier plant with more branches ensures that all parts of the plant get access to light, reducing shading and improving photosynthesis. 3. Improves Structure: A strong, evenly distributed framework sets the stage for a healthier plant that can support larger buds during flowering. The decision to leave two nodes per topped branch ensures a balance between promoting growth and avoiding unnecessary stress. Tent Conditions: Consistency is Key The room conditions this week have remained steady and perfect for her vegetative stage: • Temperature: Around 18°C—cool but manageable, keeping her growth steady. • Humidity: At 60%, maintaining just the right level to support her root zone and foliage. • Lighting: The Future of Grow (FOG) LED at 200 PPFD continues to provide optimal light for compact, strong growth. i will dim it up soon! These consistent conditions give her the environment she needs to recover quickly from topping and focus on building her structure. Nutrient Routine: Trusting the Pellets This week, I’ve continued with the Aptus Holland All-in-One Pellets as the primary nutrient source. They’re working their magic, providing a steady release of nutrients to support her vigorous growth. As a backup plan, I’m always ready to reintroduce All-in-One Liquid if she starts showing signs of needing more immediate nutrition. For now, she’s thriving, and the pellets are doing an excellent job of meeting her needs. Training and Future Plans Topping a few branches this week was just the beginning. I’m planning to continue topping over the next few weeks to shape her into a bushy, evenly distributed plant. By focusing on creating a strong structure now, she’ll be perfectly prepared for explosive growth when we flip her into flowering. Looking Ahead: Growth on Overdrive 🚀 As Week 7 approaches, I’ll be monitoring how she responds to the additional topping and ensuring her environment stays consistent. The goal is to encourage her lateral growth while keeping her stress levels low and her energy focused. A huge thank you to the incredible brands and community that make this journey so rewarding: • Seedsman Seeds for the top-tier genetics—don’t forget to use the DOGDOCTOR 10% off discount code! • Aptus Holland for their game-changing nutrient solutions. • Pro-Mix Soil for the perfect foundation with their HP Mycorrhizae + Bacillus blend. • TrolMaster for helping me maintain the perfect environment. • Future of Grow LED for reliable, efficient lighting. • Cannakan for kickstarting this journey during germination. • Grow Diaries for being the platform where we share, connect, and learn together. To all my followers, lovers, haters, and everyone in the community—you’re the heart and soul of this journey! 🌟 Bonus Content: New Episodes Weekly on YouTube! 🎥 Don’t forget to check out my YouTube channel for weekly episodes with tips, tricks, and behind-the-scenes action. Links are in the profile—come join the fun! Growers Love! 💚 DISCOUNT CODE - SeedsmanSeeds - DOGDOCTOR 10% off As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚

 Friendly reminder all you see here is pure research and for educational purposes only 💚Growers Love To you All and remember to keep that smile big and alive 💚
Likes
43
Share
~ Seedsman Zkittlez Auto ~ Zkittlez (Grape x Grape Apple) Auto x Auto Fruit (Auto Fruit Cheese x Auto Blueberry) Zkittlez Auto is one of the very sweetest-tasting auto strains available anywhere. It is a sativa-dominant (60%) strain that was bred from Zkittlez (Grape x Grape Apple) Auto crossed with a male Fruit Kush Auto, the latter a remarkable fruity strain bred from Fruit Cheese Auto and Blueberry Auto. Growers can expect to harvest some good yields of high-THC buds. Zkittlez Auto remains a fairly short plant, rarely exceeding 120 cm. in height wherever it is grown. This is a vigorous plant which is able to metabolize a high level of nutrients and she's a thirsty girl too! If growing indoors close to neighbors it is strongly advised to ensure good and effective carbon air-filtration in order to neutralize powerful odors. This strain's life-cycle is approximately 90 days from seed to harvest. The leaves on this plant are big and wide serving to convert every lumen available into Zkittlez goodness. Indoor growers should obtain between 400 - 500 gr/m2 while plants cultivated outdoors will produce slightly more at 500 - 600 gr/m2. Lateral branching is very good and it is recommended to use supports/ties to prevent snapping and keep buds close to the light source. This strain's scent is sweet and fruity with candy and berry notes. Its high-THC has been measured at between 21 - 24% with less than 1% CBD. The effect is well-balanced, cerebral and euphoric, and is very good for social situations as well as for relaxing in front of the TV either alone or with company. It also has the added effect of helping to relieve chronic pain, helping with nausea, insomnia and depression as well as stimulating the appetite.** **Credit to Seedsman.com ________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ~ The Setup ~ ~ Grown in a 2qt plastic popcorn pot filled with Mother Earth Grow 70/30 Coco/Perlite with Xtreme Gardening Mykos added. ~ Seed was germinated directly in the medium without any 'pre-soak' ~ Feeding will be by Dutch Pro Nutrients ~ 24hr light cycle while germinating ~ 20/4 light cycle after first leaves appear. ~ 4x8 Gorilla Tent ~ HLG 650R w/ 30w Supplemental UVA Bar controlled by a Trolmaster Hydro X controller set for a 15min Sunrise/Sunset simulation. (also a HLG Blackbird for additional side lighting if necessary) ~ Supplemental co2 controlled by an AutoPilot APC 8200 co2 controller ~ AC Infinity Cloudline T6 with Controller 67 using a Terrabloom 6x24" carbon filter ~ De-Humidifier and Humidifier when needed. ~ 14k BTU IdealAir portable A/C unit plumbed into tent for temperature control. ~ BlueLab testing instruments ~ Two Hurricane 18" oscillating fans ~ Two 6" Clip-on fans ~ Two 10" floor mounted fans ________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Update: 11/1- Well here we go again fam! This one's going to be super fun with one of my favorite autoflower strains from Seedsman Seeds, growing in a little 2qt. popcorn pot and entered in the 'Best Rarest & Smallest Pot by Seedsman' contest, this one's gonna be a champ! 🤩 Today I went ahead and planted a seed directly into the medium which was pre-moistened with tap water from my well. After I placed the seed about 4-5mm deep, I gently covered it with medium and poured approx. 1oz of water on it. I'll keep the pot in the tent with a Solo cup over it to retain the moisture until it sprouts... Fingers crossed! 🤞🤞 11/3- When I checked on the Zkittlez this evening I was elated to see that it had broken ground sticking up about 4-5mm from the medium! I removed the red Solo cup from her and replaced it with a clear cup that has ventilation holes in it and which I misted the inside of with water to ensure adequate humidity for the seedling. 11/4- This morning I checked on her and she's already up to about 18mm tall but has not shed her shell yet. I'll make sure that the medium stays just moist for now until she's a little older. By late in the evening she had shed her shell and her cotyledon's began opening. I noticed, after taking a close look at her, that her first tiny set of leaves were brownish looking with light colored tips. I immediately thought back to when I was pee-moistening her medium and had a 'high moment' using my other plants nutrient solution which was around 800ppm in her pot instead of the straight well water I usually use. I thought that she was getting nutrient burn causing the funky color of her first leaf set but fortunately by the end of the 20 hour light cycle, she had her first leaf set out and the were a healthy green! 11/7- Well gromies this girl has a week behind her now and I'm elated to say that she's healthy and doing marvelously! Up until now all I've done is make sure that her medium didn't dry out using straight well water ph'd to 6.1 @ 75℉. Today I went ahead and watered/fed her with 0.6L of well water with Dutch Pro Grow 'A' & 'B' added @ 10ml/g, Dutch Pro Multi Total @ 7.6ml/g, Dutch Pro Take Root @ 3.8ml/g, Dutch Pro Silica Von Liebig Special @ 1.2ml/g and Earth Juice Oily Can @ 5ml/g which was then ph'd to 6.0 @ 74℉. The Seedsman Zkittlez Auto is doing great and now is at 2 inches tall with good color. Here we go into her second week since breaking ground and the beginning of a beautiful Seedsman cultivar....follow me! 😎👍❤️ ~ Thank you from the bottom of my heart for following my grows and for all the ❤️and support you give! May all your days and grows be Blessed! 😎🙏💚
Likes
3
Share
5/15/25 This is a super beautiful plant. Shes getting nice dense trichome coverage. She doesnt need a lot of water and hasnt needed food for quite some time but just keeps on pushing out trichomes and staying
Likes
7
Share
Transplanted her into a 3 gal air pot, added some mycorrhizae to the soil and watered her with pH'd water 6.0...
Likes
7
Share
Phwoah! Grow Genius silica came thru in a big way, blessing the Blue Paint crew with the rigidity we’d hoped for. One pheno has a slight curve to it and it’s now evident that they’re starting to break away from each other in phenotypical expressions by way of height, strength and leaf structure (possible variations in new growth width), but these might well be environmental influences rather than genetic. Seedling feeding regimen has been swapped out for the veg stack. The environment of the nursery tent saw a slight shift downward in temperature as the seasons press closer to winter but this didn’t stop progress, even after the Blue Paint crew got a repotting, increasing their root space 10 fold. With the increase in legroom they also got an upgrade to first class with a tent of their own as older auto tent sisters were shifted to their final grow space. Unfortunately this might only tide them over for a short while. The worry is, longer than expected flower cycles mean their final home, the photo tent, is still packed to the rafters with ripening flower and Blue Paint is coming up behind at an alarming rate. No choice but to play it by ear and possibly end up making some big purchases, drastic changes or tough calls. Ready and willing if it comes to it, fire genetics over bag seed all day long 😂. If you’re keen to see other stuff I’m doing hit my Insta, Booka @bestendank420. Stay lifted, big love and boomshanka 🤙 Booka @ BestenDank
Likes
13
Share
Week 11 Jan. 13 - Jan. 19, 2020 Jan. 15, 2020 CS #1 & #2 are coming along nicely. No amber trichomes but wow t the plants are frosty and they have a strong pungent smell. When thr main cola is bent a little sideways it really begins out the smell. The smell is like a gassy, diesel fuel, strong chemically smell. I love it. CS #3 is giving me some problems. The pics might show it. The leaf tips are curling up and thr leaf edges are turning brown. Not sure if I can correct this befor harvest. It's late into flower. I may just ride it out until then. I've topped dress once weekly for the last 4 weeks with kelp, and a blend from roots organic for bloom 4-6-3.
Likes
2
Share
@EtnoGrow
Follow
1st photo We did the scrog, it helped us a little more to use as support to tie the branches with threads and manipulate them as we wanted, so we tamed it. but they kept growing as my colleague affirms
Processing
Likes
5
Share
Likes
5
Share
So langsam fangen die Blüten wirklich an schön auszusehen. Bin zufrieden mit dem visuellen Ergebnis der Blüten. Über den Rest urteile ich vorerst mal nicht haha
Likes
42
Share
@xs8
Follow
Week 6 started with more growth and more LST 😁 🌱👍🏻 ------ Day 38 Amazing how beautiful they are, and until now I'm really satisfied with my first grow 😁🍀🌱
Likes
3
Share
Phone was out of action , will try and fill up the missing weeks , 3 plants have been harvested All photos taken day 76
Likes
32
Share
@AsNoriu
Follow
Day 77. Maybe a bit early, but no space and one Smoothie went for a date with bud rot ;))) didn't want to loose that nice top. Very frosty, nice gassy smell surrounded by fruits. Day 82. Second girl is down. Both small as you see, but with few branches will produce seed packaging cover type plant. Maybe second got some purple fade ... First was very nice by structure. Day 85. First went to jar. How lovely it sparkles and smells !!! Solid strain, even being so small by structure. Day 89. Second is in jars too ! Happy Growing !!!
Likes
11
Share
Still maintaining, no defoliation up to this point. There are still some deformed fingers on leaves from the stress but they are doing well!