Everything fine! She’s getting bigger, and her roots too, because when I give her water, she doesn’t bend around anymore. Day 15 (April 26, 2019): she was hungry, she got food! Exactly like a Queen. 👱‍♀️🏻👗👑 Day 19 (April 30, 2019): topped over the 3rd node. Day 21 (May 2, 2019): removed the 1st node and started a 4-way LST.

May 10, 2024 Day 85 A new week and I'm not sure these 2 are ready for flushing. They have way too many white pistils. Plenty of orange, though. Banana Purple Punch A has more orange pistils. Both got a gallon of nutrient water today. So they are definitely still drinking somewhat heavily. And they haven't slowed down yet. I'll keep an eye on them though. Flushing will have to happen sometime. I'd say in the next 3 waterings. That's just a guess based on their current progress. It just seems that they aren't done swelling and there's absolutely no purple coming through yet. Banana Purple Punch A still looks great. Her buds are starting to weight down the taller tops and they are slightly leaning toward the outside of the plant. It's actually quite good. It's opening up even more space for the lowers to get as much light as possible. Air flow is great as well. This is especially important because she is in the back directly under a clip fan. So it's more prone to mold. At least that's what happened in my last grow. This time I have another clip fan across from this one, so the air circulates throughout the whole tent, top to bottom. Banana Purple Punch B looks great! She's not bending any tops, but I don't expect her to with how strong her branches are. Practically immovable. However, she's definitely getting more jiggly. And she has huge buds top to bottom. I wonder if that's the reason she doesn't budge. No room. Lol. Honestly, she may be really compact, but I have her branches spread out enough for good airflow. There's just a couple of clusters that are a bit too dense with foliage, but it doesn't seem to be a problem. Lots of airflow and light. She's a bit behind her sister plant. Way more white pistils and orange on this one. No signs of purple whatsoever. Just a healthy growing plant. I'll be checking trichomes later today if I'm up to it. I hurt my back earlier. Regardless of that, I'll be getting trichome pics today or tomorrow. Probably tomorrow with videos at the end of the week. It's been quite some time since I last took trichome pics. Bad planning on my part. However, I'm excited to see how much further along they are from last time. I won't be changing the light for another few days I think. Then I'll drop the power down. As I said before, I don't think they are ready for flushing, so not ready for light changes. The environment is still a bit off. Today the temp is 76° but the humidity is still high at 56%. This is sure to ruin something. I'm still trying to get the humidity down. I have a feeling I just don't have enough air exchange in my bed room. I'm going to continue messing with it until it's right though. Grow System Environment: Temp: 74.1° RH: 54.2% VPD: 1.29 kPa May 11, 2024 Not a lot going on today. Just some pictures. Banana Purple Punch A is looking really good. She looks to have another week or so. I'm really confused as to why my plants take so long to grow and finish up. Banana Purple Punch B has completely caught up with her sister plant. She has the same amount of orange pistils. That tells me there isn't much left to go. If she caught up, that means Banana Purple Punch A is even closer to being done than I think. Maybe. I'll check the trichomes again tomorrow. No pics unless they are done. I doubt they will be. Especially Banana Purple Punch B. On the other hand Banana Purple Punch A could have only a couple days left and just isn't going to turn purple or fade at all. I'm going to start flushing in a couple days I think. They both look about ready for it. Plus, they are about as big as they are going to get. I think the flush will bring out the colors. So next watering will be the beginning of the flush cycle. It should be in a couple days. Also, both ladies have slowed down on their water intake. So the reservoirs should be empty in 2 to 3 days. Probably 2 days. Then I can clean them out and get to it. The lights are going to be turned down when flushing begins. I'm going to aim for a DLI of 36 mol/m²/d for the rest of the grow. It shouldn't be anymore than a week of flushing before they are done. The environment is still messed up. It got down to 49% yesterday for a couple hours, but then this morning it was right back up to 54%. The temp is fine at 76° Still not cold enough at night, but I have time. A few days to work it out. I'd like to be down to 65° by then for the last week of their lives. Grow System Environment: Temp: 73.1° RH: 53.7% VPD: 1.27 kPa Update: I decided to check the trichomes anyway. Banana Purple Punch A has quite a few cloudy trichomes. Very few amber and a bit too many clear. I'd say she has about 5 days left. Banana Purple Punch B also has quite a few cloudy trichomes. However, she has about 15% to 20% clear trichomes. Amber trichomes are basically nonexistent. There's a few here and there, but mostly on the sugar leaves and not on the buds themselves. I'd say she has another 7 days left. Honestly I don't want to harvest them separately. I'd rather harvest them at the same time, so I might harvest them in 6 days. Right in between. Maybe 7 days if Banana Purple Punch A isn't quite there yet. To be honest, I have no real idea with this strain. They seem to be getting there, but there's no purple, still a lot of clear trichomes and it's been 12 weeks. So it could be another 2 weeks for all I know. I'd like to push them as far as they need, but I have 4 other plants that need to come in the tent ASAP. So I may have to chop a bit earlier than I really want to. I'll post some trichome pics tomorrow and see what you all think. Comments are welcome. Lol May 12, 2024 Some pics today. I'll try to keep this one short. Banana Purple Punch A looks good. I checked the trichomes. Not done yet. I'm sticking by my 5 days estimate. So 4 days left. She doesn't seem to be drinking at all. She is, but it's a trickle. Definitely not like it was. I'll have to empty the reservoir out tomorrow and start the flushing cycle. Banana Purple Punch B also looks great. I also checked her trichomes. She is about the same as her sister plant. Not enough cloudy trichomes, but the amber ones are starting to show up. A good sign. She might be ready in 4 days. I'm still guessing 5 to 6 days. She also isn't drinking nearly as much as she was before. A great sign that she should be starting the flush. For trichome pics, I'll be posting some tomorrow. Nothing to post today. I'll be dropping the light power when I start flushing. Which should be tomorrow or the next day. As I've said before, the DLI will be around 36 mol/m²/d. The environment is a lost cause. I cannot for the life of me get the damned humidity to a reasonable level, so I'll continue to open the tent every couple of hours throughout the rest of the grow. Happily, it's only a few days to a week. The temp is a bit high today as well. 77°. I'm already working to drop it a bit without going over 60% humidity. I should be able to get it down to 74° without a problem. It's just the humidity that's killing me. Grow System Environment: Temp: 73.9° RH: 55.6% VPD: 1.25 kPa May 13, 2024 Flushing day! I decided to rinse out the basins and begin the flush. I was going to wait another day, but I think it's time. They have about a week left I think. Honestly it should be done by now, but they aren't. Lol. No matter. They should be done in about a week. Maybe slightly less. So they have been given 4 ml of Flawless Finish. It should be the only dose I have to give. Maybe one more, but I doubt it. I still need to dry the containers out. That will take a day or two. So maybe a half gallon in a few days, just to get that last push in. Banana Purple Punch A looks great! Some more lean happening with the tops. Nothing bad or anything, just a slight lean. Perfect for heavy buds. I didn't bother checking her trichomes today. No point. You can tell she's not ready just by looking at her. Banana Purple Punch B may need even more time. I'm going to have to decided what to do. Wait for this one to be done then harvest both? Or harvest one at a time as they finish up? Decisions decisions. I'll figure it out in a week. Her branches are really jiggly now. No lean exactly, more like a sway. When she gets moved her top heavy branches sway a bit. Great sign for a heavy yield from a 17" plant. Or is it 19"? Either way, it's going to have a fantastic yield compared to her size. One advantage I am seeing with the longer finish is it will give me time to dry some Tropicana Cookies I am harvesting in a couple of days. I'll be wet trimming this time around and the dry time should only take about 5 to 7 days. Maybe 10, but I'd rather not try to stuff 4 plants in a 2x2 to dry. It's a recipe for disaster. 2 at a time stacked on top of each other. I'll be dropping the light intensity tomorrow or later this afternoon. Maybe even tonight during lights out so in the morning it will be ready for the new day of less light. As I've said before... Over and over... I'll be dropping the light power to 70% which should drop the DLI down to 36 mol/m²/d. Oh, btw, I use the Photone for my light measurements. It has a PAR meter, Lux, DLI and I Believe color spectrum? Kelvin? No clue what that does. I focus on DLI. It's a better reading than just PPFD. The environment is still messy... as always... I'm keeping the temp down to 74°. The humidity at 58%. So it's still too high, but I've done all I can to drop it down and it won't even go below 50% with the tent door wide open. It just won't. So unless I can get the humidity in my room down to like 30%, the humidity in the tent remains over 50%. Hopefully pulling the plants out daily is enough to prevent mold and other issues. There's also the two circular fans. They aren't at full power, but they don't need to be as there's two. Plenty of airflow. I'll really need to keep an eye on these plants. Maybe I'll take them out multiple times a day. Like 2 or 3. Grow System Environment: Temp: 74.5° RH: 56.2% VPD: 1.25 kPa Update: I ordered a new dehumidifier for grow tents today. It should be here tomorrow. I'm guessing a lot of my problem with the humidity is my current dehumidifier. It barely pushes air. Cheap and well used. The new one is from Vivosun. A much more reputable company. May 14, 2024 Trichome day! Alright, so I took some video today. Not the best quality, but I hurt my back so I'm all shaky. The pics were a lost cause. Lol Banana Purple Punch A looks great! More leaning branches. This late in the grow, I don't care. They aren't leaning that bad and it's only showing how heavy these buds are. Trichomes are mostly cloudy with a bit left of clear and nowhere near enough amber. 5 to 6 more days I think. Banana Purple Punch B is so pretty. She has the faintest purple coming from the flowers, but not much. It is a sign that we may end up with a purple plant during flush. Trichomes are partly cloudy with 30% clear and next to no amber. She still has time to go. I'd say another 7 to 10 days. Now I'm overshooting it just incase. I don't think the plants noticed a difference in the light drop, or they did and it's not doing anything. However, I'm not sure what it should be doing. I'm guessing preserving trichomes? Makes sense. Anyway, it's staying at 36 mol/m²/d DLI. The environment is still an absolute mess. The humidity is at like 59% and as always, I can control the temp, but nothing changes the humidity. And it's like 55% humidity out today. Fail. Lol. Grow System Environment: Temp: 74.3° RH: 59.0% VPD: 1.16 kPa May 15, 2024 Nothing to do today. They are still watered and whatnot. No changes in color yet either. I'm starting to think these both will be green phenomes. Or maybe they really aren't ready yet. It's just weird. What am I doing wrong to get all my plants to grow for so long? Oh well. This round is just different because of the other 4 plants that need this space. I really need them to finish up ASAP. No trichome check today. I can still t ell they aren't ready. The bottoms still have a majority of white pistils and the tops are just not there yet. I think they can get denser. They aren't quite rock hard yet, so I know they still have time. Banana Purple Punch A looks amazing. More leaning branches that are swaying in the breeze. No fade yet, but the leaves are starting to look ready for the fade. Maybe. Banana Purple Punch B is strong as ever. Definitely still packing on weight. Definitely not ready for harvest. Still another week I think. I'll check trichomes tomorrow on this one. I think I'll wait for her to be done then I can harvest both plants at once. The light seems to be just being a light now. I can't really see what it's doing, but I know the frost is there. Lol. So it must be doing something. The environment is killing me. Still over 60% and my room has climbed up to 60% as well. I have a heater running and the dehumidifier that I think is done working. My new one should be here today. And not a moment too soon. I should have replaced this one months ago. Unfortunately, I don't have much control over the heat anymore. The humidity is just over powering it and I can't get anything to change. I'm going to crank the heat and see if that helps. Like set it to 80° and see what happens. It's currently set to 74°. And 8 don't think that temp is high enough to combat the humidity. Crank it up! Grow System Environment: Temp: 72.9° RH: 63.0% VPD: .00 kPa May 16, 2024 Today is looking pretty good. I checked the trichomes on Banana Purple Punch B as she has the longest to go. I figure when she is done, Banana Purple Punch A will be as well. I've also watered them with plain water. PHed to 6.2. just a half gallon in the reservoirs. I'm not ready to let them dry out yet. Banana Purple Punch A looks great! Her branches are starting to lean a bit harder and her buds look amazing. No purple yet. Or at all. I'm not sure. But I'm certainly sure that the fade hasn't begun yet. I'm not bothering with trichomes for now. I'll just wait to see what her sister does. I'll check trichomes in a couple of days. Banana Purple Punch B looks amazing. Her buds are fat and dense. She smells great and stays strong. A bit more swaying. But it's the whole plant now. Wonderful! I checked the trichomes on this one. She is developing quite nicely. I'd say another 5 to 7 days? Maybe a little less if we're lucky. There's more cloudy trichomes than before and finally some amber. Much less clear as well. She definitely is nowhere near fading, so that's a concern for time. The light stays the same. It seems to be perfect for these two. So no changes. The environment is still a nightmare, but it's 86% humid outside and 63% in my room. Happily, not really, the humidity is down to 60%. Not good at all, but better than 63% or even 65%. I'm really hoping these ladies are super resilient. They should be. It's FastBuds and they have great genetics. The temp is fine. I haven't a bit higher to help some with the DLI. So it's hanging out around 76° to 77° for now. The new dehumidifier works way better than the other one. But a cool thing is that they are both small, so I fit them both in and it seems to be kinda working. It's keeping the humidity below what it is in my room, but not low enough. I know it will drop when I figure out how to drop it in my room. I really need a big dehumidifier for my room. That would solve quite a bit. Grow System Environment: Temp: 75.8° RH: 62.8% VPD: 1.07 kPa

Empecé a hacer estrategia de riego de precisión, acumule ec en el sustrato hasta llegar a 3000ms de salida en la escorrentia, voy a tratar de mantenerlo ahí unos días a ver como reaccionan las plantas, por ahora parece que hasta están pidiendo más comida aun. Hice defoliacion y acomode las ramas en la red y quedo casi toda la superficie cubierta. La luz en el medio llega a 1100PPFD y en los costados más alejados unos 700PPFD

Growing strong cut 13clones today and transplanted the two biguns loving how they are turning out

Clones taken from my last LH currently flowering outdoor diary. vegged under 50-50 sun and led. Now transplanted to 5L pot and 1.5 weeks more vegging under led and then will go to flower Led setup is 1 Mars Reflector 192 along with two units of BloomSpect 300 veg under veg switch on mars with bloomspect (only on-off switch) will flower with bloom switch on also. bloomspect true watt is 130w Mars true watt is 280w veg and 450w veg w/bloom

Noticed smell when entering the room.

Trichomes getting cloudy and it’s almost time to harvest. Started some flushing this week and their lookin good .

Flushed chopped and almost dry

Hello everybody Harvest day here and just like last year I'm gonna make it a regular flowering week in the diary and in 3 weeks to a month I will come with the results. So the chop itself went pretty smooth. I removed al the FanLeaves, sugarleaves and already did a nice trim. Other years I tried different approaches but this seems the best. I cut away the main cola and some big buds below a few days sooner since they were absolutely done, the other buds I left on the plant to mature for a few days extra and then proceeded to completly trim her. Buds look great, Pretty dense and big and all the buds kinda have the same size. The main cola is also not that huge but very decent. Frosty as hell and with a huge smell in my opinion. U would think that this is the most fun part of a grow (it is actually 😂) but I hate harvest day because of the insane smell a plant produces. Anyway she's hung up to dry now with a ventilator and a much needed carbon filter. The Roots on the plant looks insane. Lots of root bound and she really used all the soil and the entire pot. The stem is pretty thick, more then other years. I'm happy so far but the real test comes in 3 weeks. I already Tried a few sample buds and the taste is nice, a bit spicy and herbal, exactly what a Jack Herer is described like. I can only hope that with a good dry and cure she becomes even better but these were just small sample buds, curious for the big ones 😁😅 Thanks a lot for following this journey. See u guys and girls in 3 weeks Happy growing 😊🙏

Gracias al equipo de Zamnesia, Marshydro, XpertNutrients y Trolmaster sin ellos esto no sería posible. 💐🍁 Frosted Guava: La Frosted Guava es una cepa índica dominante y súper resinosa, que es un cruce de la Guava y la Frosted Skywalker. Con unas características de cultivo muy versátiles, un aroma exótico y afrutado, y un subidón relajante y lúcido, la Frosted Guava es ideal para cualquier plantación de marihuana. 🌻🚀 Consigue aqui tus semillas: Código Descuento 20%: ZAMMIGD2023 💡TS-3000 + TS-1000: se usaran dos de las lámparas de la serie TS de Marshydro, para cubrir todas las necesidades de las plantas durante el ciclo de cultivo, uso las dos lámparas en floracion para llegar a toda la carpa de 1.50 x 1.50 x 1.80. https://marshydro.eu/products/mars-hydro-ts-3000-led-grow-light/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 💻 Trolmaster Tent-X TCS-1 como controlador de luz, optimiza tu cultivo con la última tecnología del mercado, desde donde puedes controlar todos los parametros. https://www.trolmaster.com/Products/Details/TCS-1 📆 Semana 2: Fantástica semana, estan creciendo de una forma espectacular gracias a la ayuda de @marshydro, @xpertnutrients y @trolmaster. Se puede apreciar un tercer nudo aunque la aplicación de cola de caballo y el estar en una maceta pequeña ha influido en el tamaño de ella, se recupera muy rápido 😁. Esta semana espero trasplantar a la maceta definitiva. Potencia de la lámpara: 50%

Week 9 looks great, wedding cheesecake #2 got lots of main colas just slow growth compared to the other. Sour goo poison still small compensating with nice fat buds and side growth. West coast OG coming to the end of her cycle soon Overall happy

It’s so warm today! Of course I pulled all my plants out to spray with spinosad and feed/water. ********* I use a Hudson 2L sprayer. My partner used to work in the film industry and they found this brand of sprayer gets the most thorough even coverage for makeup or whatever movie magic they use sprayers to create. It’s great. ********* The larger gorilla glue has come around but I lost a few nodes. I’m seeing a little PMD, but I’ve been knocking it back when baking soda and water. I’ve been taking scalps, defoliating the big one gently and the little ones need almost daily lollipopping. I’m watching my ph and using more cal mag. I definitely feel like they are two different phenotypes.I have them on individual diets. ********** Some fungal gnats come with the humidity so I topdressed with gnat nix. I don’t believe I overwater so I hope that’s the solution! I think I may wait another week or two and get things more stable before moving to flower. I will update video tomorrow when I have access to faster upload speeds. ********** Added videos!

all nutrients are in germination sektion, if not other described everything by manufacturer's instructions. wow how beautifull she looks harvest dav probably in 1-3 weeks.

Another great looking plant from Barney’s. Everything from them I have grown has been strong and large and I would say very much commercially viable. I’m sure you could grow 20-30 plants and get a really good pheno with good structure and it be dank. Some breeders you could grow thousands of plants and never get one with good structure. That’s not true with Barney’s they have really good genetics

Welcome to GhostGrow Chapter One by PoshGrow! 🌳 Week #10 June 28th - July 5th 7th week of flowering. Humidifier was raplaced with dehumidifier to maintain 50% rH. Week #10 day 1 Completely removed ScroG and did dead leaf removal and major clean up. Scrog did his job, but at this point, it does not help much now. I need clear access to all plants because few of them going down in week or so and other need abit more time to finish. Strange thing is that all Alaskan strain seeds come from one package, but they all different. Alaskan #2 still in first side of flowering and for example Alaskan #4 almost done... Same nuts, same pH, same watering schedule. Despite these few small isues, everything is going good. Buds are still packing up some weight, plants looks healthy, tought and dear god they smell... 😅 Also I think I manage the Alaskan #5 Nitrogen deficiency. Looking abit better and stopped yellowing. At the end of the week going to clean and preapare Alaskan #2 for flowering, remove popcorn nugs, dead leafs and all leafs that is blocking light to a budsites. I will upload some more pics and comment at the end of the week #10.

Day 44 - The smell is divine, and the buds are looking very pretty. Beautiful fade going on in the leaves, almost like a purple/red/black. Planning to tapper down the nutrients as we are coming closer to Harvest. Crucial to keep the pH in range during flowering and being away a few days, I wasn't able to correct it until I was back. So they were drinking more water than uptaking nutrients.. leaving a high EC in the system. Corrected the issue by adding plain RO water, treated with cleanse, no nutrients. They are now on track and could do with a last defoliation, but I've been holding it off. Will get around to it over the next few days. The buds are sticky, smell great and rock hard. Dehumidifier was added to the tent to try lower the humidity to a better range. Can't wait to see the end results and product. Another 2 weeks an I think we will be good.

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 ATTENTION GROWERS!!!! BEWARE OF A SCAM COMPANY.... GREEN BUZZ LIQUIDS WILL SAY THEY WILL SEND FREE FERTILIZER BUT THEY MAKE YOU PAY THE SHIPPING WITHOUT TELLING YOU AND THE AVERAGE SHIPPING PRICE IS $100. AND THEY WILL GET ANGRY AND RUDE. THEY TOLD ME TO SUCK IT UP AND BITE THE APPLE🤬🤬 AND THEY TELL ME THIS RUDE CRAP AFTER THEY TOLD ME I NEVER EVER HAVE TO PAY OR WORRY ABOUT FERTILIZER EVER AGAIN... BS YOU RUDE, LYING GARBAGE COMPANY 🗑️ POOR QUALITY NUTRIENTS WITH VERY POOR AND RUDE CUSTOMER SERVICE AND NOT WORTH THE PRICE TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Welcome back to the last flowering update week. My Unit Farm test light grow of the UF2000. My house strain has been flushing for last two weeks. Fading and deficiency signs are showing as they should. I will be updating a harvest video/pictures this week after I finish the two days of darkness in a few days. Plant smell wonderful as it has in past grows. The UF2000 light for 100 watts did good in my little test area. It did not have a breeze while growing, and temps were lower then my growing rooms. Not by a lot though. The UF2000 is a great light for the price. I will be continuing to use it, and recommend it if you are on a budget. I will be doing a test grow with the UF4000 in a few months, when I start my new photoperiods. Will likely add the UF2000 in the canopy with it at that time. Thanks again UNITFARMLED_Justin. Update: 3days after this post. Plant was harvested and hung to dry. Thank you grow diaries community for the support. The likes, and follows are greatly appreciated. Showing your support for fellow growers 🌱👍. Also would like to invite you to my YouTube channel for more cannabis related videos. Remember to smash that subscribe button. 😀 Happy growing everyone, and be safe out there.🌱🤜🤛

Our journey is slowly coming to an end. Both Gelatos have developed well, and I'm looking forward to testing them soon. The smell in the box is mind blowing 💚💚💚.

Vamos familia, actualizamos la quinta semana de vida de estas NoName de Seedstockers. La temperatura que estuvo entre los 24-26 grados y humedad dentro de los rangos correctos. Todavía estamos en el ciclo 16 horas luz, 8 oscuridad, estiraron bien y ensancharon bastante también, el color es verde sano. Se nota que los nutrientes de la marca Agrobeta hacen sus funciones. También realicé una poda de bajos que yo si las veo necesarias para explotar después la flor. - os dejo por aquí un CÓDIGO: Eldruida ,descuento para la tienda de MARS HYDRO. https://www.mars-hydro.com Hasta aquí todo, Buenos humos 💨💨💨