Test

Day 49 of flower. The cookies is doing well, the smell is very fruity, lights now are set 11 on 13 off. Next week maybe i will start the flush.

Поменяла воду полностью, так как узнала что seaweed не работает в гидро, помыла корни.

Y bueno Fumetillaas ya en la semana 10 cumpliendo con el propósito de este medio ... Ir informando que pasa x ende querías decirles que nunca medimos ec... La verdad no podía frenar el amarillento o esas carencias ... Controlaba ph y suficiente... Ahora empezaremos a medir ec y ph para poder tener mejor electro conductividady tener mejor absorción de nutrientes ya que medimos macetas después del riego y tenemos una ec de 4.5 a 3.5 la cual deberia estar en otros parámetros por ende ... Siempre tuvimos alimentos suficientes para ellas solo que no teniamos la implementación necesaria... Después de la 11 a 12 cortamos y subimos el final de esta planta que luchó con todo

*=UPDATE=* Smoke Report *=UPDATE=* Harvest Totals **Smoke Report and effects** to follow after cure, May 10th ish. This was my second ever indoor grow, and compared to my last grow I have learned a lot. My goal this time was to get about 1.5-2oz a plant, up from my previous goal of 1oz a plant from last grow. Best part is I got to my goal!!😁 Next goal will be 2oz+ a plant. This was the last time I will be using my homemade grow tent, it was compromised out of recycled Styrofoam, miss-tint paint and glue, it provided me what I needed to get the job done one a extreme budget but it is preventing me from doing more. The main problem I ran into this grow was humidity control/space. The fan broke half way through and I was too lazy to get a new one as I figured I'll wait till I get a real tent. This mind set enabled some mould to flourish and that is why I had to harvest early. I felt if I let the plants go 2 more weeks, I would have hit 2oz a plant, it was only a few grams away, however if I kept going with the mould I would have been down to 1oz after all the rot was cut out from both plants, that shit fucks up your grow fast if you don't manage your air circulation. So the main things I learned: 1) I was underfeeding my plants in there 2nd half of life, thus the buds from the previous grows and this one suffered a bit. This grow does have the most dense buds I have ever grown, but it could have been better. 2) PH is key, I still did not have a PH meter but was blindly altering the PH of my water by adding in some citric acid, not only to neutralize the chlorine but also lower the PH a bit. When I did test the soils PH using a soil testing kit, it was lower then previous grows. This helped get more nutrients into the plants and grow bigger. previous grows the PH was 7-7,5 ish 3) You can get an "ok" harvest off of blue lights, my grow was under seven 18" 6500k 18w sunblaster LEDs, and I thought they would never get over 1oz a plant because they don't have the best spectrum for cannabis in flower, among the other dumb things I do as a novice grower. but they worked out just fine, still going to upgrade in time with proper lighting in the 3500k range. 4) Once the plants get bigger and buds start to becoming more dense, the air circulation is needed, its is not longer optional for a budget grow in a shity homemade tent. 5) Defoliation works. my plants have ruffly the same amount of buds, however the plant that I fiddled around with mainlining and defoliation had bigger fatter buds vs popcorn nugs like the opposite plant. 6) Fungas gnats are annoying, fuck them, use nematodes to kill them flat in there tracks. 7) Getting better at making edibles. :) So other then that, the only real differences between this is last grow is lower PH in tap water, more lights, slightly bigger pots, bit more feed and different genetics from a different breeder. I followed everything else ruffly the same. My own hydro break down from lights alone is below. I did not notice any big difference between the two plants and there phenotypes, I was meaning to take a clone and try and grow it outdoors again but forgot and that was my last of the seeds. I was surprised that one of them was a male. not even hermi, full blown male. I'm not into breeding or I would have kept him, Yields: Plant # 1 - male, killed Plant # 2 - 42.1g bud, 13.15g trim (1 .49oz, 0.46oz) bigger fatter buds Plant # 3 - 45.1g bud, 13.15g trim (1.59oz, 0.46oz) smaller nugs, almost all popcorn. =Overall - 87.2g total bud, ave 43.6g a plant. 26.3g trim ave 13.15g a plant. Smells: plants 2-3 - both smelled the same, in the beginning they had a lovely sexy lemon sent, then in the end it just turned into something else, I think some of the moulds in the tent altered it a bit. Will wait till after cure to see what its like, I noticed some changes in just drying and having them in the jars for two days now. Now that the cure is all done and finished the two strains smell a bit different in there respective jars but there smoke is almost identical. plant #2 or pheno #1 is more of a classic OG Kush smell to me, its earthy, herbal and pungent. Hints of pine in there with lemon bit woody. plant #3 or pheno #2 is more of a bright one, It's sweet smelling with berries in it, some hints of almost floral like in it, not quite rose or lavender something else, not what I was expecting at all. I like this smell better vs the other plant. Smoke Report It took its sweet time but I finally got it in. I myself do not smoke, so I relay on my roomie for this part of the report, they are a long time smoker 10+ years. They have reported that the smoke smooth and easy going, they would say it was a bit smoother then my previous grow of OK Kush CBD and Blackberry. the only noticeable differences between the different phenos is that pheno #1 is more pungent that phoneo #2 but over all the smokes flavours and quality are the same just brighter in phone #2, I feel these are a bit off from the original seeds I grew back in the day from my first ever grow but still high quality. this was rated as a equal balance of sativa and indica feels on smoking but the smells where leaning towards sativa a bit. m0use +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Cost + Time Analysis Of Growing Cannabis. m0use’s Breakdown +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Light Schedule === growth: 18h on 6h off flower: 12h on 12hr off GROWTH: 35days 5am-11pm-on -- 11pm-5am-off --- Cost of kwh with on-peak "20.8c", mid-peak "14.4c" and off-peak "10.1c". 5am - 7am -- 2hr @10.1c/kwh off-peak 7am - 11am -- 4hr @20.8c/kwh on-peak 11am - 5pm --6hr @14.4c/kwh mid-peak 5pm - 7pm -- 2hr @20.8c/kwh on-peak 7pm - 11pm -- 4hr @10.1c/Kwh off-peak --- 6h @10.1c/kwh 6h @20.8c/kwh 6h @14.4c/kwh --- Using the previous c/kwh numbers above I can find out the daily cost of the lamps in the 3 peak periods. growth and flower 6h x 10.1c/kwh = 60.6c/kw * .126 kw = 7.64c off-peak 6h x 20.8c/kwh = 124.8c/kw * .126 kw = 15.72c on-peak 6h x 14.4c/kwh = 86.4c/kw * .126 kw = 10.89 c mid-peak The "h" hours and "kw" kilowatts cancel out and we are left with a value of "c" cents per peak period add all the peak periods up and you get your cost of running the lights in cents per day c/d --- growth : 7.64c + 15.72c + 10.89c = 34.25c/d FLOWER: 52days === 8am-8pm-on -- 8pm-8am-off --- Cost of kwh with on-peak "20.8c", mid-peak "14.4c" and off-peak "10.1c". 5am - 7am -- 0hr @10.1c/kwh off-peak 8am - 11am -- 3hr @20.8c/kwh on-peak 11am - 5pm --6hr @14.4c/kwh mid-peak 5pm - 7pm -- 2hr @20.8c/kwh on-peak 7pm - 8pm -- 1hr @10.1c/Kwh off-peak --- 1h @10.1c/kwh 5h @20.8c/kwh 6h @14.4c/kwh --- Using the previous c/kwh numbers above I can find out the daily cost of the lamps in the 3 peak periods. growth and flower 1h x 10.1c/kwh = 10.1c/kw * .126 kw = 1.27c off-peak 5h x 20.8c/kwh = 104c/kw * .126 kw = 13.10c on-peak 6h x 14.4c/kwh = 86.4c/kw * .126 kw = 7.77c mid-peak The "h" hours and "kw" kilowatts cancel out and we are left with a value of "c" cents per peak period add all the peak periods up and you get your cost of running the lights in cents per day c/d --- flower : 1.27c + 13.10c + 7.77c = 22.14c/d Lights === LED’s I use are 18w each and I have 7 lamps on an aray. 18w*7 = 126w | 126w/1000 = 0.126Kw growth: 18h/d lights on * .126kw lights hydro use = 2.27kw/d flower: 12h/d lights on *.126kw lights hydro use = 1.51kw/d G:79.45 + F:78.52 = 157.97kw for the entire grow. Cost growth : 7.64c + 15.72c + 10.89c = 34.25c/d flower : 1.27c + 13.10c + 7.77c = 22.14c/d The time my lights where on in the grow for 12 weeks and 1 day, or 85 days. growth: 35d * 34.25c/d = 1,198.75c ÷ 100 "100c in a dollar" = $11.99 flower: 52d * 22.14c/d = 1,152.28c ÷ 100 "100c in a dollar" = $11.52 the "d" days cancel out and we are left with a total cost of the lights for my 85day grow. 11.99 + 11.52 = $23.51 Using the regular calculation of grams harvested divided by watts used is not accurate to me, it does not account for all the time the lamps are on, the length of grow to the over all cost. The calculation that makes sense to me is this, harvested dry weight of usable cannabis buds/trim/keif/whatever in grams divided by total kw used. Could also combine it with grams per total single use costs “anything you used only for this grow and wont reuse in the next, or fractions of multi use items like fertilizers if they ½ full” and see how much you’re investing per gram. "kw" ÷ "g" = kw/g "$" ÷ "g" = $/g I have harvested 4oz or 113.5g on 157.97kw, this includes buds and trim in mycase. 157.97kw ÷ 113.5g = 1.39kw/g of usable cannabis. I’d still try and aim for under 1kw/g. $23.51 ÷ 113.5g = $0.20g The other ratio would have been, 113.5g to 126w = 0.9g/w just shy of the 1 mark. So in total, it cost me 20c per 1g I grew in light electricity alone. Not to bad. legend, kwh = kilowatt per hour kw = kilowatt w = watt h = hour c = cents $ = dollars d = day LED= Light Emitting Diode

I was traveling ... to give information ... the temperature has dropped ... I think she will be even slower outdoor ...

So far so good. A little discoloration in a few leaves. Bud sites forming. Weird weather we've been having and temps in the box jumped up into the 90's. That being said I went ahead and made the switch to LED. Wish I would have switched sooner. Temps fell almost 20F. Sure some has to so with the outside temps dropping back down but this thing runs so cool. Great light penetration but not sure if the intensity is enough. Time will tell. She pretty much stopped eating and drinking. I read that prior to flowering they will slow down overall uptake and slow down growth as well. I don't quite remember that from my last grow but I do remember there being a huge flowering stretch. I'm switching over to bloom nutes next week after a flush so hopefully she'll get the nutes she needs/wants.

Great harvest as usual with this recipe

Theyre starting nice. Love this

Because of how early I topped her, the base was very dense with foliage so I did some defoliation. You can see the four main branches (2 of which were topped) and the central FIM with its supercropping scars in the 4th pic. Still running a 1000w MH bulb at 50%. Looking at getting a SMLED/COB LED combo light to replace my cool tube and associated fans and ducting. Water level was down to 50%. I'll have to start topping up. July 04 I rearranged my setup a bit while switching the MH bulb for the HPS. I think next run I'm going to grow 2 autoflowers and stagger them and try to run a perpetual harvest. I'm going to try to stick with the HID lights if I can manage the heat effectively. It was working well when I had the 6" cooltube and the 4" carbon filter exhausting out the window, but now that the smell is more intense, I don't want any air going out except through the carbon filter. I've thought about running filter-->fan-->cooltube-->outside but they're different sizes so it would lose efficiency. I've also thought about running clean air from outside the tent through the cooltube and then outside as it was intended, but I just don't think that's going to work with the space. July 05 I noticed shiny spots on the leaves which seems to indicate I have thrips. I can't see any actual larvae even with my glasses on, but the sucked out spots are fairly distinctive and I can see small black particles that must be excrement. Temperature seems pretty good in there and humidity is ok at about 45%. I have some peppermint Dr Bronner's castile soap so I made a foliar spray of insecticidal soap by just pouring a few drops into a big spray bottle. Just worried about when to spray so I don't burn the plant. Just checked the reservoir and temp is 26c, PPM 860, Ph 6.5. I'm going to add plain water and try to bring the Ph back down to 5.5. It's possible that what I'm seeing is due to the Ph being too high. I'm going to start checking the Ph at least every couple days. It's annoying to unclip all the training wires every time I open the reservoir. It's also not very convenient to fill it. It's at an awkward height. I like the 5 gallon bucket because it was easy to set up and understand but I might be better off with a different type of reservoir. 3:45pm I just sprayed the underside of one section of leaves, I'll see how that section does under the lights. My concern is that if I spray under the lights, it will burn, but if I spray at night, it could cause mold. Hopefully I can get away with spraying all the leaves once or twice a week and it will go away. July 06 She looks ok but I'm thinking it might be a Ph issue. Ph was 6.2 so I decided to just pitch the water and start again. I changed my method so I'm mixing the nutrients in the actual bucket the plant lives in and testing it there, instead of mixing in another bucket and pouring it into the DWC. Ph is now 5.7 and PPM 700. July 08 just noticed that RH is 70% when the lights come on. I feel like I'm going to need a solution for overnight humidity. Maybe dry rid bags. Rh is 60% after a couple hours. Leaf, solution, and substrate temp down to 24 which is nice. Ph is back up to 6.3 again! I pH downed some tap water to 4 and added that to the reservoir. July 09 Pistils just started coming out :) The Ph is still back up to 6.3 again but PPM is 750. I'm going to change the res again and lower the nutrient content a bit.

Esa familiaaa, vamooos que estoy de vuelta y es que me flipa que para ser autos estás misty gorilla de Zambezaseeds se están poniendo jugosas, puede que a final las llegue a sacar al exterior para que maduren del todo o quien sabe las aguanto hasta el final ahí dentro. Sigo regulando el ph ,la humedad está en torno al 45% La temperatura oscila los 27 grados. No me quejo pa ser autos están deputamadre , buenos humos fumetillas.

slow start for the gorilla glue family (gorilla glue auto and the strawberry glue), the wedding cake from Barneys farms started surprisingly flowering after 3 weeks! :D The wedding and all others needed a lot of defoliating but now the wedding has slowed the growth on the leaves and focussed on stretching for some nice strength to the dense buds its growing :D Every other day the strawberry and gorilla need defoliating to stop the bud sites being covered.