The Grow Awards 2026 🏆
Likes
17
Share
@Targona
Follow
18/09/2022 - 42 days since my little girl sprouted from seedsđŸŒ± The second week of flowering of my Orange Sherbet 🍹🍹🍹 Nutrients: Jungle Indabox - the girl responded well to the nutrient change, so I continue to feed the same as last week, when I set the nutrients for flowering Jungle Environ X - bud stimulators đŸŒŒ I am giving Advanced Nutrients - bud stimulators, Bud Ignitor for the last time this week Atami - ATA Calmag - it is recommended to use Calmag when growing under LED lights Training: LST: just a slight LST, I attached some small twigs with string so that more light shines on them 💡💡 Defoliation: I did a bigger defoliation in the middle of the week so that the girl could breathe well and the big leaves wouldn't shade the twigs 🍃🍃 Light: Mars Hydro TS1000, the girls are doing amazing under this great light, I can see a big difference compared to my past results 💡💡💓 The girl is slowly turning into a big lady, her stems are strong, regularly grown, so that massive buds can form on them đŸŒžđŸ‘©đŸŒČ You can see white tufts of pistils on the stems, in this week of flowering they are just right and look like a blanket of snow ❄❄ She is already a strong lady revealing her beauty. đŸŒČ💓 The box emits a soft scent that reminds of fruit and earth, but it's a gentle whiff 🍇🌍 Thanks for the likes and you can follow me on Twitter 🐩: @ Targona666 See you soon 😍
Likes
13
Share
Likes
16
Share
I have now trimmed and hung the plant after 9 weeks of flowering
Processing
Likes
34
Share
Cime dure come cemento ricoperte di zucchero. Profilo terpenico fruttato con tocchi zkittlez. Che dire?Non vedo l'ora di fumare anche questa 😊
Likes
38
Share
Hi guys So day 6 of the flip and the screen is nice and full I will now let the nodes and bud sites stretch up, connecting autopots up tomorrow with just water for a week, I had to wait as needed a new air pump for the resivour. Blue cheese is a bit droopy also due to them needing water but have perked back up now. I raised the lights as I noticed the purple stems so obviously to much wattage set on the light. I am changing nutes to shogun for the autopot system, hence just the water for a week. On the whole looking good but a long way to go.
Likes
11
Share
3/28/25 chopped and humidity was a little high starting off 3/30/25 have them drying at 60% and 70° 4/3/25 Still needing a day or so of drying to be at a stable humidity Beautiful plant. Fan leaves with Triched out patterns visibly everywhere. Even though i chopped quite a bit off of the plant, i still got quite a bit bigger yield than i expected. All sizable nugs. Pulled 65 grams.
Likes
4
Share
Grown out this week and got them ready for the early flower growth. Trimmed heavy and wired all branches away from each other. LST in full effect. Hoping it’s not too much trauma for them.. they proved me wrong. Bounced back with vigor and bright excitement! Eager to see these buds start forming 👀
Processing
Likes
15
Share
@No_Clout
Follow
I think they have finished stretching as their starting to produce bud sites, so hopefully they stay around this size as it’s the sweet spot for me, not too small but not huge trees, their still just under 1m tall.
Likes
4
Share
pH imbalance seems a little late to correct so imma let it slide n harvest on d 12th week after 48hours dark , ey yawww
Likes
36
Share
@grundoh
Follow
Right now I am just playing the waiting game with White Widow and Industrial Plant. Both have shown signs of maturation with their trichomes but neither one has a majority of milky trichomes yet. In hindsight, I should have waited until Industrial Plant was more mature before I started flushing her -- I've lost a few weeks that I could have been continuing to fatten her up. I added more bamboo rods and tied branches to them with some plant tape on both plants. White Widow's buds are rock hard and keep bending its branches so hopefully the extra support will help. I cut off the main cola and a side cola of Industrial Plant CBD due to bud rot that I failed to notice for roughly a week. After cutting out all of the bud rot I could find on Industrial Plant I checked over her and White Widow meticulously to make sure everything was kosher. I added a spare oscillating fan in the tent to try and improve air circulation in the room. I have had trouble with humidity and temperature shifts throughout this grow -- something I'll have to dial in as I progress. I imagine the climate shifts combined with how thick the main cola was probably contributed to the bud rot. Seedsman White Widow Auto is ready to be harvested as of Day 100. Over 2 days her trichomes really started to turn amber. I have started flushing her as of today and plan to harvest a day or two into the start of Week 15. As for Dinafem Industrial Plant Autoflowering CBD? I am thinking of just cutting my losses if her trichomes haven't gotten to at least majority-milky by the time White Widow gets chopped. She just looks mostly-dead and only wants a drink once every 7-10 days now. That and I have some new gear I really want to test out, as well as some different ideas for my second run that I've been itching to get started on.
Processing
Likes
11
Share
This week was a battle...lost power for 3 days in the beginning of the week. N the humidity was a 96% with cold temps in 67°...once the power came on made some adjustments. Didn't water them for5 days . Removed all clovers n alfalfa. Removed all fan leaves affected by the high humidity. And cleaned up the area abit...the temp n humidity are now at a steady 74° n humidity at 47%..they healed up nice . And watered them and they began to bloom some more...I harvested the super skunks autos as they wer just about done. N good timing too. Helped reduce humidity in the tent....they are currently drying n will update on how well the harvest went.. n for these blueberry 420 they still need more time. Will update on how they finish up
Likes
19
Share
@MaxMo8
Follow
I transferred it to a half-gallon pot and I mixed the organic fertilizer with the soil.
Likes
25
Share
Stretch 10 centimĂštres Jour52 lĂ©gĂšre defolliation et arrosage avec deux litres d'eau ph6.3 Petit rappel sur le meilleur cycle de lumiĂšre pour les autofloraisons QUEL EST LE PLANNING LUMINEUX OPTIMAL ? Le cannabis Ă  autofloraison peut survivre avec Ă  peine 5 heures de lumiĂšre du soleil par jour. Mais si vous voulez que vos plants s’épanouissent, atteignent le pic de leur puissance et produisent une lourde rĂ©colte, ils ont besoin d’au moins 18 heures de lumiĂšre par jour. Le planning optimal de lumiĂšre pour la culture en intĂ©rieur du cannabis Ă  autofloraison est un 20-4 constant pendant tout le cycle de vie. Bien entendu, des plannings de 18-6, 20-2 et 24 heures non-stop ont tous leurs avantages, mais nous avons obtenu les meilleurs rĂ©sultats avec le planning 20-4. Les cultivateurs en extĂ©rieur peuvent potentiellement lancer la culture dĂšs le printemps. Cependant, nous recommandons toujours de faire germer les graines et de cultiver les jeunes pousses en intĂ©rieur sous des lampes artificielles pendant une semaine ou deux pour obtenir les meilleurs rĂ©sultats. Nous parlerons des options en extĂ©rieur plus en dĂ©tail un peu plus bas. LE CYCLE DE VIE DU CANNABIS À AUTOFLORAISON La plus grande diffĂ©rence entre le cannabis Ă  photopĂ©riode et Ă  autofloraison est que l’horloge tourne pour une auto dĂšs le moment oĂč la coque de la graine s’ouvre. Le cycle de vie post-germination de la grande majoritĂ© des variĂ©tĂ©s Ă  autofloraison modernes est de 8-12 semaines au total. Au contraire des variĂ©tĂ©s Ă  photopĂ©riode, les autos n’ont pas besoin du planning lumineux courant 12-12 pour faire la transition vers la floraison. Une variĂ©tĂ© Ă  autofloraison progressera dans son cycle de vie indiffĂ©remment du cycle jour-nuit. CROISSANCE VÉGÉTATIVE ACCÉLÉRÉE Il est presque impossible de dĂ©limiter la phase de la jeune pousse de la croissance vĂ©gĂ©tale avec les variĂ©tĂ©s Ă  autofloraison de nos jours. De plus, en 30 jours, la plupart exploseront soudainement en phase de floraison. Donner aux autos un bon dĂ©part, solide et sain est un facteur critique pour une culture rĂ©ussie. Beaucoup de choses peuvent se passer pendant une semaine avec un hybride Ă  autofloraison vigoureux en culture. Il n’y a pas non plus beaucoup de temps pour la transplantation. Nous recommandons d’utiliser notre kit de germination ou de planter directement dans les premiers et derniers rĂ©cipients dĂšs le dĂ©but. Des pots/rĂ©cipients en plastique de 10-20 L avec de nombreux trous de drainage au fond sont parfaits. Les Air-Pots sont encore mieux. Beaucoup de cultivateur dĂ©couvrent Ă  leurs dĂ©pens que les petits pots ne sont pas durables pour les hybrides autos modernes plus grands. PrĂ©parez-vous Ă  devoir ajuster quotidiennement votre lampe de culture pour Ă©viter de brĂ»ler le feuillage. De plus, tout comme les variĂ©tĂ©s Ă  photopĂ©riode, les conditions environnementales optimales pour les jeunes plants Ă  autofloraison sont des tempĂ©ratures entre 20 et 25 °C et une HR dans une fourchette de 50-70 %. En outre, les besoins en nutriments seront considĂ©rablement plus faibles que les variĂ©tĂ©s Ă  photopĂ©riode. Il n’y a donc aucune bonne raison de ne pas cultiver bio. GĂ©nĂ©ralement, les autos prĂ©fĂšrent avoir un milieu de culture lĂ©gĂšrement fertilisĂ© et bien aĂ©rĂ©. Les terreaux lĂ©gers et/ou le coco sont des substrats fortement recommandĂ©s. La plupart des cultivateurs prĂ©fĂšrent des lampes CFL blanc chaud, LED et MH pour la courte pĂ©riode vĂ©gĂ©tative. Cependant, les lampes HPS Ă  double spectre sont tout aussi efficaces et probablement plus pratiques Ă  utiliser. FLORAISON RAPIDE ET FÉROCE DĂšs que vous pouvez voir les pistils pousser Ă  partir des premiĂšres fleurs, vous pouvez vous dire qu’en 45-60 jours, les plants finiront le cycle de floraison et seront prĂȘts Ă  la rĂ©colte. Que vous soyez prĂȘt ou non. Mais vous serez prĂȘt, car vous aurez fait les ajustements nĂ©cessaires en temps et en heure. Les apports en engrais de croissance vĂ©gĂ©tative Ă  un dosage faible Ă  moyen seront remplacĂ©s par des nutriments pour la floraison et des doses appropriĂ©s de complĂ©ments et boosters de floraison. Une fois de plus, un rĂ©gime alimentaire spartiate est recommandĂ©. Pas besoin de changer le planning des lampes, car vous allez suivre votre planning originel jusqu’à la rĂ©colte. Mais il faudra vous assurer que les tempĂ©ratures ne dĂ©passent pas les 28 °C et vous devez rĂ©duire votre HR vers une fourchette plus basse de 40-60 %. Les plants vont s’étirer Ă  des degrĂ©s divers. Quoi qu’il en soit, vous devez faire attention et toujours maintenir une distance optimale entre la lampe et la canopĂ©e. Un ensemble de cordages ou de crochets rĂ©glables rendront la tĂąche bien plus aisĂ©e. Ne vous imaginez pas que toutes les autos dĂ©velopperont une structure courte de buisson, Ă  moins que le sĂ©lectionneur ne donne des donnĂ©es qui le suggĂšrent. Naturellement, les deux derniĂšres semaines de floraison devraient ĂȘtre rĂ©servĂ©es Ă  un rinçage en profondeur du milieu. De l’eau pure, ou une solution de rinçage lĂ©gĂšre fonctionneront trĂšs bien. Quand la majoritĂ© des poils ou pistils sur les fleurs auront changĂ© du blanc Ă  l’orange/rouge, vous devriez passer au rinçage. Ne sautez pas cette Ă©tape finale critique. Vous mĂ©ritez les fleurs les plus savoureuses, sans contamination. COMMENT LES AUTOS RÉPONDRONT AUX TECHNIQUES DE TAILLE ET DE PALISSAGE ? La rĂ©ponse courte : trĂšs bien ! La plupart des variĂ©tĂ©s Ă  autofloraison de nouvelle gĂ©nĂ©ration rĂ©pondront trĂšs positivement au LST. Et tant que vous taillez tĂŽt, l’étĂȘtage et le fimming peuvent multiplier les tiges de tĂȘtes et en plus booster les rendements. De plus, la mĂ©thode ScrOG peut ĂȘtre combinĂ©e avec toutes ces techniques pour un rendement maximum. Cependant, la culture Ă  grand volume utilisant la mĂ©thode SOG est probablement le style de culture le plus populaire Ă  prĂ©sent. Un nombre croissant de cultivateurs d’autos expĂ©rimentent avec les mĂȘmes pratiques courantes de taille et de palissage Ă  haut rendement que les cultivateurs de cannabis Ă  photopĂ©riode utilisent. Les cultivateurs dĂ©butants ne devraient probablement pas se lancer dans une taille ou un palissage intensif ou excessif avant d’avoir de l’expĂ©rience. Cependant, plier un peu les pointes de croissance pour crĂ©er une canopĂ©e plus plate ne peut pas nuire aux rendements. De mĂȘme, une dĂ©foliation minimale pour augmenter la pĂ©nĂ©tration lumineuse ne stressera probablement pas des plants en bonne santĂ©, tant que vous vous limitez Ă  l’élimination des grosses feuilles nourriciĂšres qui font de l’ombre aux sites de floraison. May the force be with you đŸ’Ș
Likes
24
Share
Rock hard buds Miicrobialmass for the win and the new led is killer. The knobs like knots grow out of the sides of the buds are something to look at wow !!! Monkey berries is in flushing mode , slurricane won’t be far behind in the next week or 2 I’ll flush
Likes
38
Share
@Skunkman
Follow
Just defoliated them and so far they seem like they’ve handled it well hopefully I get some big fat colas đŸ€žđŸ»âœŒïžđŸ»
Likes
47
Share
Day 48: - Shuffle some plants again to give them better spots. - Did defoliate again to make sure the lights can reach lower buds. Photos and videos where taken before watering, thats why the leafs are not lifted. Nothing special this week. see you guys next week.